Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
*YOU WILL NEED A PC*
LINK FOR CRDOIRD :- https://drive.google.com/file/d/1FVhCtp6qvvjty1otP4By--caZkp0p4DP/view?usp=sharing
BUGS:-
1. MTP (CAN BE FIXED BY EUREKA KERNEL)
2. LOW VOLUME (CAN BE FIX BY ADJUSTING EQUALIZER NOT PERFECT BUT BETTER) (SEE THE SCREENSHOTS FOR EQULAIZER SETTINGS)
3. YOU
HOW TO INSTALL.:-
*MAKE SURE YOUR PHONE BOOT LOADER IS UNLOCKED*.
1. TURN OFF YOUR PHONE.
2. PRESS THE POWER BUTTON AND VOLUME DOWN BUTTON AT THE SAME TIME FOR A FEW SECONDS TILL A SCREEN APPEARS.
3. PRESS VOLUME UP BUTTON, YOU WILL ENTER INTO THE DOWNLOAD MODE.
5. CONNECT PHONE WITH PC
6. ONCE YOUR PHONE INTO THE DOWNLOAD MODE. JUST CONNECT YOUR PHONE WITH THE PC WITH ORIGINAL DATA CABLE. A MESSAGE WILL APPEAR ON THE ODIN SCREEN THAT THE PHONE IS CONNECTED.
7.. SELECT CRDROID.TAR IN AP
8. GO TO OPTIONS-SELECT NAND ERASE.
9. NOW FLASH
10. IF YU GET BOOTLOOP. TO FIX THIS PRESS VOLUME DOWN + POWER BUTTON. WHEN PHONES SCREEN GOES OFF QUICKLY PRESS VOLUME UP + POWER BUTTON. YOU WILL BOOT IN TWRP.
11. NOW FORMAT DATA. ( IF YOU GET FAILED TO MOUNT DATA ERROR THEN STAY HERE OR GO STEP 15)
12. GO TO ADVANCE WIPE- SELECT DATA- RESIZE OR REPAIR PARTITION- REPAIR PARTITION.
13.REBOOT RECOVERY
14. FORMAT DATA. REBOOT-SYSTEM
15. NOW BOOT YOUR SYSTEM.
16. AFTER BOOTING (*IF YOU WANT TO INSTALL GAPPS*)
17. POWER OFF THE PHONE BOOT TO TWRP BY PRESSING VOL UP + POWER BUTTON AT SAME TIME.
18. *IMP* ADVANCE WIPE-SELECT SYSTEM- RESIZEOR REPAIR PARTTITON- RESIZE PARTION- SWIPE TO RE-SIZE
19. DOWNLOAD GAPPS:- https://opengapps.org
20.. DOWNLOAD ARM64- 10.0- PICO (*MY CHOICE*)
21. PLACE IT IN INTERNAL STORAGE OR SD CARD. YOU CAN DO IT USING TWRP IF YOU ARE USING PC
22. FLASH- MICRO SD (IF YOU HAVE GAPPS IN MICRO SD CARD )- INSTALL
23. FORMAT DATA
24. REBOOT-SYSTEM
25. NOW SETUP THE PHONE
YOU CAN FIX BIG CORNERS IN SETTING-CrDroid SETTINGS-USER INTERFACE-ROUNDED CORNERS-UN-SELECT DEFAULT VALUES- SET THE VALUE TO 20.
THANKS FOR SEEING!
HAVE A GOOD DAY.
TELL ME IF YOU HAVE ISSUES
BYE BYE*
NEW VERSION SCREENSHOTS(V12.12)
i have flashed this rom...this is freezing suddenly and restarting the phn....i think this is happening for eureka kernel....cauz i tried the eureka kernel before and my phone was freezing then with one ui 2.0
this rom have crash fingerprint
O sensor de digital não funciona :/
Translation: The digital sensor does not work: /
Alguém conseguiu fazer funcionar o simcard ou o leitor biometrico?
Translation: Has anyone managed to make the simcard or biometric reader work?
Hallo Sir ... I am New Here.
Can you please make Lineage 18 for our device
this rome is not working an i have downloaded all custom roms for SM-A307FN and no one work
if any one find somthing pleas tell me
this rom is rooted or not ?
Ahmed_heshmat said:
this rom is rooted or not ?
Click to expand...
Click to collapse
root manually
Every time I'm on whatsapp call, the other person can hear the multimedia sound of my phone through the call, is there any way I can fix that? Other than that, the rom is the best I've tried.
Related
Cautions:
1.your warranty is now void.
2.do this at your own risk.
3.read the whole post before starting.
Flashing CWM recovery and taking backup :
1. Download the package and extract all files.
2. Extract the driver.zip located in drivers folder->1
3. Install the driver.if your OS is 64bit then install the x64 one.if the OS is 32bit,then the x86 one.
4. Open researchdownload application
5. Select the 2nd button with double cog sign.
6. Now a new window will appear like the screenshot attached.
7. Right click on the file name field.choose the files located in "Required files" folder of the package.
be careful here.Put fdl1 in fdl1 field,fdl2 in 2nd field and the recovery image(extract the "CWM-recovery-SC8810-nonpadded.zip") in recovery field. Then press the "OK" button.
8. Press the Start (Play) button in ResearchDownload -application (third button).
9. Turn off the phone.
10. Keep holding the "- volume" key. Without releasing the button "- volume" plug the usb cable
11. The process of CWM- burning should be started now in ResearchDownload-application and it will take approximately 1 Minute.
I think you can release the Vol.Button, but I had kept it nevertheless.
12. Wait until the CWM-flashing has been finished (A green sign will appeare and "Passed" will be shown in ResearchDownload- application window).
13. Remove the battery, wait 20 seconds. Put battery back and turn on the phone.
14. now hold the vol (-) and power button until the screen flashes (40 seconds or less or more) and now you are in the CWM recovery menu.
15. PLEASE make a full backup by the "backup and restore" option .make sure there's about 500mb free space in your micro SD card.
16. after the backup reboot the phone and PLEASE store the backup files in somewhere else..(the whole ''clockworkmod'' folder)
congratulation. you have done a full backup and flashed your CWM recovery.
Rooting device:
*don't do this.if u find that your backup size is lower than 250mb~300mb(slight +/- may occur)
1. download and put the "superuserandfullbackup.zip" in your micro SD card
2. power off your device.
2. Reboot to Recovery by holding volume (-) and power button until the screen flashes and recovery menu comes.
3. just go to "install zip from sdcard option and select the zip "superuserandfullbackup.zip"
4. flash it
5. reboot.
Advices:
Rooting is dangerous.so first make a full backup of your unrooted stock Rom just after flashing CWM.
Store the backup(size will be around 250mb~300mb(+/- ) in someplace safe.it's the life of your phone.If anything goes wrong,it's the only key to fix your phone.......be careful.........
Getting back your warranty:
Restore your stock Rom's backup.Then,flash the stock recovery(included in the package.find it in RECOVERIES folder),in the same way you've flashed the CWM.
good luck.and thanks for reading this.
Xposed
Notes : This is Xposed Framework + Modules. Please take a Backup of ur ROM if in case going to "soft-brick" ur device.
Pre-Requesites
Root access (# or superuser/supersu)
It is important to perform this to access the application to system partition to modify sensitive files.
BusyBox ( Stericsson/JRummy)
It is also recommended to install this after rooting ur device to be able the root access work properly and enable all features.
Custom Recovery (TWRP/CWM (official/unofficial) )
This is also recommended to install this after rooting and busybox installation. You need this to flash zip files (flashable zip file to device) and installing or updating ROM.
InstallationStep 1 : Install the zip through recovery. Not in normal Mode. To open recovery, Turn off your phone and after vibrates, Press and hold Vol- and Power button. On some devices, Vol+ and Power button On any other devices Vol+ + HomeButton +Power. (Samsung Devices) On any other devices While the phone is needed to turn on and while in home screen press and hold Power button + Volume- + Volume + ( Do IT Quickly) (Nexus Devices) and for Other Sony devices Power button and while in SONY Logo, a couple of Press Volume- and will enter into recovery mode. If you see that there's 'enter recovery', press power button.
Step 2 : (CWM RECOVERY) Press volume- and volume+ to scroll the highlight and power button is select. If you're using an old recovery, follow this. install zip --> apply update from sdcard /external sd or storage/sdcard0 or storage/sdcard1 and select the zip file. move the highlight to install "blahblahblahxyz.zip'' and reboot your phone.
Step 2. 1 : TWRP RECOVERY if u use touch version, go to install --> and select the directory under sdcard foler and swipe the arrow to flash and reboot your phone.
Step 3 : When your phone is booted up, it will install the Xposed installer , Flat style Indicator and Flat Style Colored Bar . Open the Xposed Installer and go to Framework , tick Install/Update and Press back button 2x . And go to Modules , tick checkbox the Flat Style Colored Bar and Flat Style Indicator.
Reboot
After reboot If bootloop presents, go to recovery and restore your back up ROM. :laugh: I have some screenshots.
Take note that the SystemUI in notification shade doesn't change and it will not replace SystemUI.apk
THUMBS UP and HIT THANKS.,. :good: :good:
XDA Assist is not the place for this.
Thread closed.
Samsung Galaxy S6 Screen Lock Removal 100% Working
So after going through all the options and researching as much as I can, even after buying a tool , the only way it worked was as below.
* Don't worry if USB-Debugging is not enabled
Tools Needed:
ODIN3 (v3.12.3)
TWRP Recovery (Download the most recent) twrp-3
twrp-3.1.1-0-zeroflte.img.tar (Worked for me)
Steps:
1. Boot Device into Download Mode (PRESS AND HOLD VOLUME DOWN + HOME BUTTON + POWER BUTTON)
2. Start Odin
3. Connect your S6 to PC (It will be detected by Odin and show the connected COM port)
4. Click 'AP' on ODIN and select the downloaded TWRP file
5. Deactivate AUTO REBOOT on ODIN
6. Click Start and the flashing process will start
7. When down, restart the phone using VOLUME DOWN + POWER
8. Once the screen goes black , press VOLUME UP + HOME BUTTON + POWER to bring up the recovery menu.
9. Once you are in the TWRP RECOVERY menu
10. Go to 'Advanced' --> 'File Manager'
11. Go to 'data' Folder , then to 'system'
12. Find 'gatekeeper.password.key
13. Find 'gatekeeper.pattern.key
14. Either rename them or delete them
15. Go back to main TWRP recovery menu and reboot 'SYSTEM'
Voila!
* THERE WAS NO DATA LOSS WITH THIS METHOD, HOWEVER I DO NOT TAKE RESPONSIBILITY FOR ANY DATA LOSS DUE TO YOUR DOING OR ACTIONS,
* ORIGINAL CREDIT GOES TO ALL DEVELOPERS BEHIND THESE TOOLS AND REVERSE ENGINEERS. I ONLY PUT OUT THE METHOD THAT WORKED FOR ME.
* FURTHER CREDIT GOES TO ALL XDA FORUM POSTERS WHO SHARE THEIR METHODS AND TOOLS AND HELP THE ENTIRE COMMUNITY IN EVERYWAY THEY COULD.
Hi! I know this is an ancient post, but I tried on a G920F (S6) and got a bootloop once I flashed TWRP...
Sorry for posting here, but I was unable to post in Android Development. And I feel this may help people who have trouble installing Nougat 7.1.2 on there Galaxy S4-I337M. As it was quite difficult for me to find the proper tools and method to install this OS.
The instructions are listed below. You will need to have TWRP installed and your phone rooted prior to doing the following
Recommended External SD CARD to save all files required.
Files required
-TWRP-3.1.1- GOOGLE dl.twrp.me/jfltecan/twrp-3.1.1-0-jfltecan.img.tar.html
-Odin3_v3.12.3- GOOGLE odindownloader.com/download/odin3-v3-12-3
-Gapps-GOOGLE opengapps.org/
-Lineage OS 14.1-GOOGLE JFLTE-SIDE-androidfilehost.com/?fid=961840155545596426
*SuperSUGOOGLE download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
I would install SuperSu but I believe Lineage has a built in SU. But to be Safe flash it anyways.
That is JFLTE ROM for S4 CANADIAN VARIANT.
Before you do any of this make sure you backup your phone image. This means everything not just apps and user data. If you have older version of twrp; enter recovery and go to backup. Then backup device. Once finished boot device. Save that backup to your PC.
I would recommend you have external SD card as well. Once you have your phone IMG backed up do the following.
Ensure you have Gapps downloaded for 7.1. You can choose which to download. I would recommend Pico 7.1.
It is the one with least google garbage.
Keep all files on phone but SD card is recommended in case of install failures.
Flash twrp 3.1.1 through odin, Make sure it is latest version. Turn off auto reboot on twrp.
When you flash 3.1.1 and odin states it has PASSED. Press VOL DOWN + HOME + POWER.WHEN SCREEN GOES BLANK QUICKLY PRESS VOLUME UP WHILE STILL HOLDING POWER AND HOME. WHEN PHONE SAYS RECOVERY, LET GO OF POWER WHILE PRESSING VOL UP+HOME. This will ensure you enter recovery and not freeze at main. If you cant get into recovery do following.
*Turn off phone. Then power on while holding VOL UP+HOME+POWER.When phone vibrates let go of power and continue pressing VOLUP+HOME. This will ensure your phone boots to recovery. Sometimes the phone will freeze and say SEandroid enforcing and will not allow you to get into recovery. So do the above.
Once phone is in recovery go to wipe. Wipe the following.
DALVIK,
SYSTEM,
DATA,
CACHE.
YOU CAN DO INTERNAL STORAGE, BUT ONLY IF YOU HAVE ALL REQUIRED FILES ON EXTERNAL SD CARD. DO NOT WIPE INTERNAL IF YOU DO NOT HAVE EXTERNAL SD CARD.
!!DO NOT WIPE EXTERNAL SD CARD WHEN DOING WIPE.!!!
Once the wipe is complete Press back to get to TWRP main menu. DO NOT REBOOT AFTER WIPE JUST PRESS BACK KEY.
Then press INSTALL and go to the folder where you saved all the file Lineage rom, Gapps, SuperSU. Your going to go to install the ROM first.
select the folder where its saved and click the lineage os.zip and swipe to flash.
ONCE THE FLASH IS DONE PRESS BACK AND FLASH GAPPS.
THEN PRESS BACK AGAIN AND INSTALL SUPERSU.
ONCE SUPERSU.ZUP IS DONE FLASHING. THEN HIT REBOOT.
!!!******IMPORTANT- WHEN YOU HIT REBOOT YOU WILL SEE OPTIONS STATING INSTALL *NEW TWRP APP* AND SOME OTHER OPTION. YOU NEED TO MAKE SURE THESE ARE **UNCHECKED**. IF LEFT ON YOU WILL GET SEANDROID ERROR. SO MAKE SURE THEY ARE UNCHECKED THEN SWIPE TO REBOOT********!!!
Now your system will boot to lineage. The first boot takes some time, so DO NOT panic. Allow the System to boot up and enter User Setup.
*******DO NOT TURN OFF PHONE JUST WAIT AND THE PHONE WILL LOAD OS AND ENTER USER SETUP***********
Once phone boots into OS. IT will enter Setup and you can take it from there.
Good luck!
PM me for any questions.
Has anyone tried this yet that can confirm if this works?
Until this is confirmed, I'm going to go with GoldenEye.
O meu celular funciona quase tudo normalmente, mas meu celular ficou sem o som ele ta todo mudo fone não pega chamadas nada que for de audio pega nele, eu já formatei mas o problema continua, eu acho que o problema deve ser na ROM, alguem me ajuda por favor
what could "take some time" mean? 10mins or more?
Bnee said:
Sorry for posting here, but I was unable to post in Android Development. And I feel this may help people who have trouble installing Nougat 7.1.2 on there Galaxy S4-I337M. As it was quite difficult for me to find the proper tools and method to install this OS.
The instructions are listed below. You will need to have TWRP installed and your phone rooted prior to doing the following
Recommended External SD CARD to save all files required.
Files required
-TWRP-3.1.1- GOOGLE dl.twrp.me/jfltecan/twrp-3.1.1-0-jfltecan.img.tar.html
-Odin3_v3.12.3- GOOGLE odindownloader.com/download/odin3-v3-12-3
-Gapps-GOOGLE opengapps.org/
-Lineage OS 14.1-GOOGLE JFLTE-SIDE-androidfilehost.com/?fid=961840155545596426
*SuperSUGOOGLE download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
I would install SuperSu but I believe Lineage has a built in SU. But to be Safe flash it anyways.
That is JFLTE ROM for S4 CANADIAN VARIANT.
Before you do any of this make sure you backup your phone image. This means everything not just apps and user data. If you have older version of twrp; enter recovery and go to backup. Then backup device. Once finished boot device. Save that backup to your PC.
I would recommend you have external SD card as well. Once you have your phone IMG backed up do the following.
Ensure you have Gapps downloaded for 7.1. You can choose which to download. I would recommend Pico 7.1.
It is the one with least google garbage.
Keep all files on phone but SD card is recommended in case of install failures.
Flash twrp 3.1.1 through odin, Make sure it is latest version. Turn off auto reboot on twrp.
When you flash 3.1.1 and odin states it has PASSED. Press VOL DOWN + HOME + POWER.WHEN SCREEN GOES BLANK QUICKLY PRESS VOLUME UP WHILE STILL HOLDING POWER AND HOME. WHEN PHONE SAYS RECOVERY, LET GO OF POWER WHILE PRESSING VOL UP+HOME. This will ensure you enter recovery and not freeze at main. If you cant get into recovery do following.
*Turn off phone. Then power on while holding VOL UP+HOME+POWER.When phone vibrates let go of power and continue pressing VOLUP+HOME. This will ensure your phone boots to recovery. Sometimes the phone will freeze and say SEandroid enforcing and will not allow you to get into recovery. So do the above.
Once phone is in recovery go to wipe. Wipe the following.
DALVIK,
SYSTEM,
DATA,
CACHE.
YOU CAN DO INTERNAL STORAGE, BUT ONLY IF YOU HAVE ALL REQUIRED FILES ON EXTERNAL SD CARD. DO NOT WIPE INTERNAL IF YOU DO NOT HAVE EXTERNAL SD CARD.
!!DO NOT WIPE EXTERNAL SD CARD WHEN DOING WIPE.!!!
Once the wipe is complete Press back to get to TWRP main menu. DO NOT REBOOT AFTER WIPE JUST PRESS BACK KEY.
Then press INSTALL and go to the folder where you saved all the file Lineage rom, Gapps, SuperSU. Your going to go to install the ROM first.
select the folder where its saved and click the lineage os.zip and swipe to flash.
ONCE THE FLASH IS DONE PRESS BACK AND FLASH GAPPS.
THEN PRESS BACK AGAIN AND INSTALL SUPERSU.
ONCE SUPERSU.ZUP IS DONE FLASHING. THEN HIT REBOOT.
!!!******IMPORTANT- WHEN YOU HIT REBOOT YOU WILL SEE OPTIONS STATING INSTALL *NEW TWRP APP* AND SOME OTHER OPTION. YOU NEED TO MAKE SURE THESE ARE **UNCHECKED**. IF LEFT ON YOU WILL GET SEANDROID ERROR. SO MAKE SURE THEY ARE UNCHECKED THEN SWIPE TO REBOOT********!!!
Now your system will boot to lineage. The first boot takes some time, so DO NOT panic. Allow the System to boot up and enter User Setup.
*******DO NOT TURN OFF PHONE JUST WAIT AND THE PHONE WILL LOAD OS AND ENTER USER SETUP***********
Once phone boots into OS. IT will enter Setup and you can take it from there.
Good luck!
PM me for any questions.
Click to expand...
Click to collapse
Im gonna try it
Worked for me - Samsung S4 I337M from TELUS. Thanks!
I'm interested in this ROM for the SGH-I337M. Can you confirm what works and what does not? Does camera work (both pictures and recording; front facing and rear facing?). Does GPS work? Does bluetooth and Wi-Fi work? Any significant issues? Also, I noticed that there are several newer ROMS.
while this worked for me my goal was to install magisk. Which throws a "boot image patched by unsupported programs. Please restore stock boot image".
i wonder if this is because it has been tweaked for this phone. or if Gapps is doing something.
probably the "optimized" aspect.
is Gapps absolutely necessary though?
Hey. Can anybody let me know if this will overheat my phone, or if there is a newer version available for download? I'm really interested in this, but I'd rather not go through the process of getting a new ROM, and setting everything up again, if it makes my phone feel like a clothing iron.
EDIT: I went into the files uploaded by this guy, and downloaded the most recent version of version 14, and... Wow. Awesome! It's super fast, and it does NOT heat my phone up one bit! My only question now is: Does version 16 of this ROM work for the Canadian variant of the S4? I can't seem to find any information on this, so any reply would be greatly appreciated. Thanks.
(EDIT)
OneUI 4.1 has finally arrived, if you haven't got your Tab s6 rooted, you can just follow the instructions below. This new part is for the people who followed the guide to root their Tab s6 and now want to update to the new firmware version without losing their data. This guide is inspired in https://forum.xda-developers.com/t/...te-rooted-device-whilst-keeping-data.4245989/. But for simplicity of search I have decided to place it here
(END OF EDIT)
I ran into some problems and took some time to figure out how to install TWRP and root the tablet. The normal procedure by which you flash TWRP and then flash Magisk doesn't work as the download mode won't accept non-official files.
Then, once I got my tablet rooted by the patching method of Magisk, I installed TWRP with their app and got stuck in the logo due to not formatting the data.
After some research and quite a lot of time, I managed to get around that and be able to do everything.
Here is a step by step detailed guide of how to do so.
ATTENTION: These modifications void your warranty and may brick your device. I am in no way responsible for any damage you may cause. Follow this guide at your own risk
Requirements:
-> Latest version of the firmware of your model (I used this site which had the latest version and decent download speeds https://galaxyfirmware.com/model/SM-T860)
(To find which version to download, go into the Phone app, and type *#1234#)
-> Latest Magisk.apk file (https://github.com/topjohnwu/Magisk/releases)
-> Disbale_Dm-Verity_ForceEncrypt zip file (https://zackptg5.com/android.php#disverfe)
-> Latest TWRP img (https://eu.dl.twrp.me/gts6l (europe) or https://dl.twrp.me/gts6l (americas))
-> Official TWRP tool (Play Store)
-> Samsung drivers (https://developer.samsung.com/android-usb-driver)
-> Latest Version of Odin (https://odindownload.com/SamsungOdin)
-> SD Card or Minimal ADB and Fastboot (https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790)
(If SD card)
Copy Magisk, AP file from the firmware zip, Disable_dm zip and TWRP img into the SD card, else, you will have to use adb sideload
0. Create a backup of all your data (we are going to wipe the data of the tablet)
(Tablet)
1. Activate developer settings (go to Settings->About Tablet->Software information, and tap 5 times on build number).
2. Go into developer settings and activate OEM unlocking and USB debugging.
3. Turn off the tablet and turn it back on pressing Power + Vol. Down buttons to enter Device Unlock Mode.
4. Press and hold Vol. Up and in the next menu, press Vol. Up to unlock the bootloader (attention, this will erase all of your data)
5. Run through the setup, but be sure to activate the internet (this will prevent the tablet from relocking).
6. Activate developer settings again, and go into it to check that OEM unlocking is greyed out.
7. Install Magisk
(PC)
8. (No SD) Copy the AP file to the Tablet.
(Tablet)
9. Go into Magisk, press Install->Patch a file->Recovery mode (on)->Select file (The AP file).
10. Copy the patched file back into your computer.
11. Shut down the tablet.
12. Press Vol. Up + Vol. Down and connect the tablet to your computer with a USB to enter download mode.
(PC)
13. Open Odin, it should show that your device is connected.
14. Go to the settings tab and uncheck the Auto-Reboot option.
15. Flash all the files of the latest firmware, using CSC (not HOME_CSC) but substituting the AP file with the patched one. (With the WiFi version, you might not have a CP file, don't worry)
CRITICAL STEP (if not followed correctly, may lead to bootloop)
(Tablet)
16. Once the flashing is complete, press Vol. Down + Power during 7 seconds to restart the tablet. As soon as the screen blacks out, swap to Vol. Up + Power (and keep pressing even though it asks to press power) to enter the recovery.
17. In the recovery, navigate to Wipe data/factory reset with the volume buttons and press power button to select. Confirm and reboot.
18. While rebooting, you need to press Vol. Up + Power during 3 seconds (Until the press power to continue appears). This is due to Magisk being installed in the recovery partition.
19. Run through the setup again, but this time you need to login into your google account to enter the Play Store.
20. You should have the Magisk app installed. Open it and it will configure itself.
21. When it reboots, press again Vol. Up + Power for 3 sec.
22. Download the Official TWRP app.
(PC)
23. (No SD) Copy the latest TWRP image previously downloaded into the tablet.
(Tablet)
24. Go into the TWRP app and give it root permissions.
25. Enter TWRP flash and select the latest TWRP img
26. Go into the reboot menu and select reboot recovery.
27. The phone will reboot into TWRP.
28. Tick don't show this message again and slide to allow modifications.
29. Wipe -> Wipe data, Cache and Dalvik and Format data.
30. Reboot -> Recovery.
31. (SD) Flash Disable_DM-Verity zip, and then flash Magisk zip.
32. (No SD) enter the advanced menu and open adb sideload. Connect to the PC, open Minimal adb and fastboot and adb sideload the zip files.
33. Reboot system
Congrats, you have a rooted Samsung Galaxy tab S6 with TWRP installed!
FAQ:
1) Ok, I f* up, I am now stuck in the Samsung logo, what do I do?
Press Power and Vol. Down for 7 seconds, this will auto reboot your tablet. Then, as soon as the screen goes off, try to press Vol. Down + Vol. Up and connect through USB to the PC. With some luck, you manage to get into download mode. If you don't, repeat.
Flash the files with the Magisk modified AP, reboot into recovery and factory reset (follow the next instructions if you want to install TWRP), or else flash the stock rom.
2) I am seeing some screens with some warning messages, is that Ok?
Yes, it is normal, Samsung does that to scare people off from installing modifications on their devices. Can I take them off? Yes, but it is not a simple process. If you really want to, follow this guide, but adapting to the device (https://forum.xda-developers.com/t/...sage-on-samsung-a30-after-root-device.3954589). Another important thing is, when you want to enter recovery, you need to keep pressing Vol. Up + Power, even when the tablet displays the message that asks to press the power button.
3) Don't know... You ask
Works perfectly, thank you!
I have a question: to decrypt the internal memory which files can I flash?