Related
I'm hoping someone smarter than me can help me out on this. I cannot get SELinux set to permissive. I've tried Wanam, SELinuxModeChanger, and Paragon. Everytime anything tries to change the mode it immediately reverts back. I am rooted and I disabled KNOX using a script.
EDIT: Forgot to mention I'm on the P907A (AT&T).
dragunbayne said:
I'm hoping someone smarter than me can help me out on this. I cannot get SELinux set to permissive. I've tried Wanam, SELinuxModeChanger, and Paragon. Everytime anything tries to change the mode it immediately reverts back. I am rooted and I disabled KNOX using a script.
EDIT: Forgot to mention I'm on the P907A (AT&T).
Click to expand...
Click to collapse
Hi.
There's a kernel switch set to "Always enforcing"
If I understand the basics of this issue correctly you'll need a patched and recompiled kernel.
I haven't looked around but if there isn't one available, it should be possible to make one yourself.
Check this out:
http://forum.xda-developers.com/showthread.php?t=2755962
I haven't tried it out myself but the instructions seem fairly comprehensive.
There are a couple of issues that follow so I strongly suggest reading the entire thread and instructions several times and ask around if something is unclear.
Regards
Elo
Sent from my SM-P905 using XDA Premium HD app
I have a rooted HTC one m7, I'm fairly new to the whole entire rooting thing.
I have not installed any roms as of yet.
I keep installing it and this pops up, can you guys help out?
Thanks in advance.
NothingOriginal said:
I have a rooted HTC one m7, I'm fairly new to the whole entire rooting thing.
I have not installed any roms as of yet.
I keep installing it and this pops up, can you guys help out?
Thanks in advance.
Click to expand...
Click to collapse
Have you updated your phone to Lollipop?
Check out THIS
Selinux mode changer installed from Google Play and set to permissive?
Lim Wee Huat said:
Selinux mode changer installed from Google Play and set to permissive?
Click to expand...
Click to collapse
That didn't work, but thanks.
NothingOriginal said:
I have a rooted HTC one m7, I'm fairly new to the whole entire rooting thing.
I have not installed any roms as of yet.
I keep installing it and this pops up, can you guys help out?
Thanks in advance.
Click to expand...
Click to collapse
When xposed failed to install there framework to system it will crate a flashable zip file in sdcard ...
Flash those file via custom recovery.
Have you installed BusyBox?
https://play.google.com/store/apps/details?id=stericson.busybox
Planterz said:
Have you installed BusyBox?
Click to expand...
Click to collapse
Every time I try to install busybox it gives me errors.
I looked up solutions and didn't find anything useful.
NothingOriginal said:
I have a rooted HTC one m7, I'm fairly new to the whole entire rooting thing.
I have not installed any roms as of yet.
I keep installing it and this pops up, can you guys help out?
Thanks in advance.
Click to expand...
Click to collapse
To add onto my original post, I have not turned S-Off on my phone.
I tried doing it with rumrunner and it says that "The cap is on REALLY tight" and that I have two options.
One of them was to install a insecure kernel.
Any recommendations?
Hello everyone. I'm just a bit curious (and worrying) about this.
I have the Find My Device (or formerly Android Device Manager) 's administrator permission disabled. However, this morning I got my device almostly erased by this feature (luckily I turned off Wi-Fi at that time). After re-checking, I found that somehow the admin permission was re-enabled (WITHOUT MY PERMISSION !). Could anyone here please explain me why?
Thanks very much.
minhducsun2002 said:
Hello everyone. I'm just a bit curious (and worrying) about this.
I have the Find My Device (or formerly Android Device Manager) 's administrator permission disabled. However, this morning I got my device almostly erased by this feature (luckily I turned off Wi-Fi at that time). After re-checking, I found that somehow the admin permission was re-enabled (WITHOUT MY PERMISSION !). Could anyone here please explain me why?
Thanks very much.
Click to expand...
Click to collapse
Are you sure? If so it sounds like you must have malware with root access on your phone. Maybe your network also hacked.
I didn't think disconnecting WiFi will stop erase command, but I might be wrong as never tried it. Also you got everything back That suggests to me it was not "erasing" but something else was happening.....
IronRoo said:
Are you sure? If so it sounds like you must have malware with root access on your phone. Maybe your network also hacked.
I didn't think disconnecting WiFi will stop erase command, but I might be wrong as never tried it. Also you got everything back That suggests to me it was not "erasing" but something else was happening.....
Click to expand...
Click to collapse
Thanks for replying. Actually, I got to reproduce that scenario. I clean-flashed my firnware again with GApps, then revoke GMS' Administrator permission. And...it automatically enables when I click Enable Lock & Erase in Find My Device.
minhducsun2002 said:
Thanks for replying. Actually, I got to reproduce that scenario. I clean-flashed my firnware again with GApps, then revoke GMS' Administrator permission. And...it automatically enables when I click Enable Lock & Erase in Find My Device.
Click to expand...
Click to collapse
Its a google feature
If you had already signed in to your google account , then it works automatically
kushfighter2 said:
Its a google feature
If you had already signed in to your google account , then it works automatically
Click to expand...
Click to collapse
Without user's approval to enable administrator permission... I'm a bit worried.
minhducsun2002 said:
Without user's approval to enable administrator permission... I'm a bit worried.
Click to expand...
Click to collapse
I tried it on my phone
Not working
Custom rom: Noble OS android 7.0
kushfighter2 said:
I tried it on my phone
Not working
Custom rom: Noble OS android 7.0
Click to expand...
Click to collapse
I don't know whether it works on your device.. I also tried on a Galaxy A5 (16) and it can still enable itself.
By the way, which model is your device?
minhducsun2002 said:
I don't know whether it works on your device.. I also tried on a Galaxy A5 (16) and it can still enable itself.
By the way, which model is your device?
Click to expand...
Click to collapse
I have a galaxy s6 on a s8 ported ROM
have xposed and root .
kushfighter2 said:
I have a galaxy s6 on a s8 ported ROM
have xposed and root .
Click to expand...
Click to collapse
Well, I thinks that depends on the GApps installation type (pre-installed or flashed manually).
Is there any development of kali nethunter for samsung s8/g950fd ?
Nabil Prodhan said:
Is there any development of kali nethunter for samsung s8/g950fd ?
Click to expand...
Click to collapse
I was using the nexus build I believe on my US snap s8. It was some what functional. Of coarse I can't run modded kernel or anything
TheMadScientist said:
I was using the nexus build I believe on my US snap s8. It was some what functional. Of coarse I can't run modded kernel or anything
Click to expand...
Click to collapse
which nuexus build worked in your s8 ? and do you have any idea about exynos s8 ? and which bugs have you faced there after installing that kernel ? can you please clarify ......
Nabil Prodhan said:
which nuexus build worked in your s8 ? and do you have any idea about exynos s8 ? and which bugs have you faced there after installing that kernel ? can you please clarify ......
Click to expand...
Click to collapse
I can't Install any kernel
https://************/how-to-install-kali-nethunter-on-the-galaxy-s8/
This is what I followed
https://www.google.com/amp/s/forum....g955u-s8-kali-nethunter-install-t3682285/amp/
TheMadScientist said:
I can't Install any kernel
https://************/how-to-install-kali-nethunter-on-the-galaxy-s8/
This is what I followed
https://www.google.com/amp/s/forum....g955u-s8-kali-nethunter-install-t3682285/amp/
Click to expand...
Click to collapse
Facing problem with flashfire (root was found ,but access could not be acquired)//// I am using magisk 19.3. And i can't go back to super su, i have to stick with magisk for using some of my necessary modules. Do you have any other idea ? or any idea how can i fix this flashfire problem ?
Nabil Prodhan said:
Facing problem with flashfire (root was found ,but access could not be acquired)//// I am using magisk 19.3. And i can't go back to super su, i have to stick with magisk for using some of my necessary modules. Do you have any other idea ? or any idea how can i fix this flashfire problem ?
Click to expand...
Click to collapse
Use twrp. Flashfire is real finicky
TheMadScientist said:
Use twrp. Flashfire is real finicky
Click to expand...
Click to collapse
can't find nethunter-flo-marshmallow-3.0.zip . can you please upload the file link ?
Nabil Prodhan said:
can't find nethunter-flo-marshmallow-3.0.zip . can you please upload the file link ?
Click to expand...
Click to collapse
https://images.offensive-security.com/nethunter/nethunter-flo-marshmallow-kalifs-full-2019.2.zip
TheMadScientist said:
https://images.offensive-security.com/nethunter/nethunter-flo-marshmallow-kalifs-full-2019.2.zip
Click to expand...
Click to collapse
I am facing another problem after installing the zip, my left side display touch is not working. After the problem ,I have flashed stock rom with odin, but it's same problem with the touch. What should I do ?
Nabil Prodhan said:
I am facing another problem after installing the zip, my left side display touch is not working. After the problem ,I have flashed stock rom with odin, but it's same problem with the touch. What should I do ?
Click to expand...
Click to collapse
That's weird I never had that issue. I wouldn't even know where to start on that.
TheMadScientist said:
That's weird I never had that issue. I wouldn't even know where to start on that.
Click to expand...
Click to collapse
What can I do ? and samsung lcd is too much expensive ,you know. Do you have any idea ?
Nabil Prodhan said:
What can I do ? and samsung lcd is too much expensive ,you know. Do you have any idea ?
Click to expand...
Click to collapse
I would assume it's in the kernel or something. Make sure there aren't any extra partitions. It shouldn't have done any hardware damage. It has to be something not set straight in Odin. There are only a select number of partitions actually touched by Odin.
So one would need to find out what other partitions get touched or modded. I have restored before Kali and had a bunch of partition errors I assume was due to locked bootloader but even after restore still had those errors. Eventually a total format and restore cleared them. But your unlocked bl and modifiable kernel makes it different than my case
TheMadScientist said:
I would assume it's in the kernel or something. Make sure there aren't any extra partitions. It shouldn't have done any hardware damage. It has to be something not set straight in Odin. There are only a select number of partitions actually touched by Odin.
So one would need to find out what other partitions get touched or modded. I have restored before Kali and had a bunch of partition errors I assume was due to locked bootloader but even after restore still had those errors. Eventually a total format and restore cleared them. But your unlocked bl and modifiable kernel makes it different than my case
Click to expand...
Click to collapse
I made a pit file and flashed this pit through odin. But no change, I think pit file does re-partition in phone. Any other way to totally clear all of the partitions and reinstall all of the drivers including touch drivers ?
You tried andrax instead installs on top of android as a normal app needs unlocked bootloader and root to full work but has all the same tools as kali nearly and few it doesn't
Nethunter and Andrax need custom kernel to suppot monitor mode usb wifi card, someone know what kernel i should use for that for G950f? I really need it but dont have PCto compile it myself, please if someone have kernel with a drivers for rtl8812au for s8. Thank you
skedone said:
You tried andrax instead installs on top of android as a normal app needs unlocked bootloader and root to full work but has all the same tools as kali nearly and few it doesn't
Click to expand...
Click to collapse
Any way to install either andrax or nethunter on a S9 g960u rooted locked bootloader?
Having some issues with andrax, just wants to keep installing things on my phone. this is my first time using it.
It always has to install stuff it's downloading all the Linux apps , or you can install termux and so it via that too
Hello guys, i need help i can't install vance yt because the turn on/off miui optimization is gone in developers option. I recently updated my poco x 3 pro 12.0.2 global to 12.0.4 global after update its gone. I can still search it but i cant find it once im in developers option. Any advice or help will kindly be appreciated.
Tried formatting/ download latest package/choose update package .
Still the theming and turn on miui optimization gone.
@cwapasion Are you using Xiaomi.EU ROM? If so, they completely disabled option for turning ON/OFF MIUI optimization for end-user. You can enable it by using any Android terminal, Termux for example, as superuser, but you need to be rooted.
If you're rooted, paste these commands into terminal:
su
setprop persist.sys.miui_optimization false
Then Optimization settings is back in the menu. By the way, Youtube Vanced doesn't require you to turn off MIUI optimization for a long time now. Are you using Vanced Manager from their official site vancedapp.com?
justwannahelp said:
@cwapasion Are you using Xiaomi.EU ROM? If so, they completely disabled option for turning ON/OFF MIUI optimization for end-user. You can enable it by using any Android terminal, Termux for example, as superuser, but you need to be rooted.
If you're rooted, paste these commands into terminal:
su
setprop persist.sys.miui_optimization false
Then Optimization settings is back in the menu. By the way, Youtube Vanced doesn't require you to turn off MIUI optimization for a long time now. Are you using Vanced Manager from their official site vancedapp.com?
Click to expand...
Click to collapse
Is there even a way to install a Xiaomi.EU ROM yet, without TWRP?
Anyway, I tried using Vanced Manager on MIUI 12.0.4 and I was getting a "permission denied" error when installing anything from the Vanced Manager, I could install microG manually but installing Vanced itself was a no-go, until I disabled MIUI optimisations. Only then it went through. It's the recommendation I got on their Discord server as well.
What's interesting is, why the option to toggle these optimisations has disappeared for OP, but I still have that option on the same MIUI version... Region related??
POCO X3 Pro Global V12.0.4.0.RJUMIXM
POCO X3 Pro EEA V12.0.4.0.RJUEUXM
OP has Global version, in Europe there is EEA rom.
I am curious what other changes have been made in software by Xiaomi?
@TheReduxPL Well crap, I've mistaken OP's phone with regular Poco X3 NFC model. It complicates things, then. But, there's ADB workaround for this, which should work.
Check it out, OP @cwapasion
justwannahelp said:
@TheReduxPL Well crap, I've mistaken OP's phone with regular Poco X3 NFC model. It complicates things, then. But, there's ADB workaround for this, which should work.
Check it out, OP @cwapasion
View attachment 5264533
Click to expand...
Click to collapse
Thanks but it seems not working on my end . I get this failed to set this property. Do i need to root my phone?
TheReduxPL said:
Is there even a way to install a Xiaomi.EU ROM yet, without TWRP?
Anyway, I tried using Vanced Manager on MIUI 12.0.4 and I was getting a "permission denied" error when installing anything from the Vanced Manager, I could install microG manually but installing Vanced itself was a no-go, until I disabled MIUI optimisations. Only then it went through. It's the recommendation I got on their Discord server as well.
What's interesting is, why the option to toggle these optimisations has disappeared for OP, but I still have that option on the same MIUI version... Region related??
Click to expand...
Click to collapse
Yeah, i don't know if it's a bug because I'm the only one experiencing it since update? I also noticed that my phone has been encrypted after update and the option is gone in dev options.
justwannahelp said:
@cwapasion Are you using Xiaomi.EU ROM? If so, they completely disabled option for turning ON/OFF MIUI optimization for end-user. You can enable it by using any Android terminal, Termux for example, as superuser, but you need to be rooted.
If you're rooted, paste these commands into terminal:
su
setprop persist.sys.miui_optimization false
Then Optimization settings is back in the menu. By the way, Youtube Vanced doesn't require you to turn off MIUI optimization for a long time now. Are you using Vanced Manager from their official site vancedapp.com?
Click to expand...
Click to collapse
I'm supposed to get my phone in the mail tomorrow (US based member). Do you know if there is a root method available for this phone?
I updated mine and have the same issue. I am trying to root mine but the wait 168 hours option was the result of unlocking the bootloader for me. So i guess 7 days of waiting
cwapasion said:
Thanks but it seems not working on my end . I get this failed to set this property. Do i need to root my phone?
Click to expand...
Click to collapse
Sorry to hear that, I didn't realize it won't work without root access. I just did the quick search ¯\_(ツ)_/¯ It seems like you would need to "su" first (I'm not 100% sure if that's the case though, maybe something else is to blame) which means your device needs to be rooted. But, since there are no custom Recovery for this phone yet, we all have to wait.
@urbanman2004
The best idea is to wait for any official/unofficial releases of TWRP or other recovery projects for this model on XDA thread/s or other forums.
Also, don't forget to start unlocking your bootloader. With Xiaomi timers, you can wait some time ツ
Apply for permissions to unlock Mi devices
en.miui.com
justwannahelp said:
@urbanman2004
The best idea is to wait for any official/unofficial releases of TWRP or other recovery projects for this model on XDA thread/s or other forums.
Also, don't forget to start unlocking your bootloader. With Xiaomi timers, you can wait some time ツ
Apply for permissions to unlock Mi devices
en.miui.com
Click to expand...
Click to collapse
I know: https://forum.xda-developers.com/t/twrp-for-poco-x3-pro.4253941/#post-84746639
But... The option is there in the Developer Settings
Check at the bottom of the settings
cwapasion said:
Thanks but it seems not working on my end . I get this failed to set this property. Do i need to root my phone?
Click to expand...
Click to collapse
I found a fix @cwapasion
https://www.reddit.com/r/Xiaomi/comments/koxyjs/_/ghug50a
DJPRMF said:
But... The option is there in the Developer Settings
Check at the bottom of the settings
Click to expand...
Click to collapse
Nope I'm on 12.0.4 global A11 and dont have it
Ysnek said:
Nope I'm on 12.0.4 global A11 and dont have itView attachment 5266399View attachment 5266405
Click to expand...
Click to collapse
Strange, I am on the exact same version and I have it at the very bottom of the developer options.
Little strange indeed....
But note the version code from MIUI as is different.
(In Portuguese, but is the same version)
Ysnek said:
I found a fix @cwapasion
https://www.reddit.com/r/Xiaomi/comments/koxyjs/_/ghug50a
Click to expand...
Click to collapse
work for me.. thanks bro
@Ysnek Tap the "reset default value" several times.
DJPRMF said:
@Ysnek Tap the "reset default value" several times.
Click to expand...
Click to collapse
Thanks this one works for me.
thx.. worked too