Database Info

Upgrading to 6.1

Hi,
I'm sorry about this post but there seems to be an anormous amount of information which doesn't make a lot of sense to me.
All I want to do is upgrade my palm treo 750 from win5.0 to 6.1.
I've downloaded the rom but it doesn't upgarade. So I need to figure out a way to flash this phone so it can be upgraded to any roms.
I have tried the Cheetahunlocker which doens't work. It gets stuck on 0% then times out.
Could someone please give me some basic instructions on the best way to do this on the treo.
I've done this on the TYTN2 whith no issues however on this phone, it seems to be a lot harder.
Thanks in advance.

Your device needs to be unlocked. You can do this by calling ATT and getting unlock code or by using Magic_Unlocker.
search
Also you will need to have the HardSPL installed which is Step 1 only of the CheetahUnlocker
I just did it yesterday so I know it works.
After you get the phone unlocked, name the ROM .nbh file CHEEIMG.nbh and then put it on the SD card
The start the CheetahUnlocker process as it enters the HardSPL process it will go ahead and run the CHEEIMG file and flash your ROM
(it works ! ) DON"T CHANGE THE RADIO !!!!
After doing that be sure and reclaim your ROM space - search web for Removing Ext ROM and do that process, hard reset and you are ready to go
Takes about 15 min!

jcrompton said:
After you get the phone unlocked, name the ROM .nbh file CHEEIMG.nbh and then put it on the SD card
Click to expand...
Click to collapse
Thanks for your info.
sigh..
The rom is an exe file...
I downloaded 7-zip, extracted the rom to a folder.
Looking through it, I am unable find the ROM.nbh file!
CHEEMING.nbh is already there..
What am I doing wrong?
Thanks.

artii said:
Thanks for your info.
sigh..
The rom is an exe file...
I downloaded 7-zip, extracted the rom to a folder.
Looking through it, I am unable find the ROM.nbh file!
CHEEMING.nbh is already there..
What am I doing wrong?
Thanks.
Click to expand...
Click to collapse
Sorry I forgot it was already named CHEEIMG.nbh -- just use it like I said above.
Copy it to the SD card, put the SD card in the device and after you have used Magic_Unlocker , connect via Active Sync and start the CheetahUnlocker process. This will start the three step CheetahUnlock process (really all you need is step one which will put the HardSPL in place) as that process fails the CHEEIMG file on your SD card will get flashed.
Hope this makes sense
Bottom line is that you will be doing an SD flash of the CHEEIMG.nbh file but it takes HardSPL for that to work. Step one of the CheetahUnlocker installs HardSPL (that will be all you need of that process)

remember!
THE SD FLASHING METHOD TAKES A REALLY LONG TIME. SO LONG YOU MIGHT THINK IT'S BROKEN. BUT IT'S NOT!!!!
caps with bold and red= great way to emphasize an important point.

Thanks for the info but I'm still running into trouble.
I copied the file to the SDcard but when running the cheetahunlocker, it give the same error at 0% ( error 206) something about the connection..
I notice that active sync turns off when the cheetah unlocker goes to the coloured screen.
Edit:
Also, should I be moving the CHEEIMG.nbh or just copying it to the SD card?
Thanks.

artii said:
Thaks for the info but I'm still running into trouble.
I copied the file to the SDcard but when running the cheetahunlocker, it give the same error at 0% ( error 206) something about the connection..
I notice that active sync turns off when the cheetah unlocker goes to to the coloured screen.
Click to expand...
Click to collapse
Did you run the MagicUnlocker first?
Is the CHEEIMG.nbh file in the root of your SD card? Try re-formatiing your SD card (FAT32 important!) and then putting the CHEEIMG.nbh file in place on the root of the SD card.
After starting the CheetahUnlocker the TriColor screen should come on and then it should go to a standard White boot scan. It will ask if you want to flash and you will be asked to confirm by pushing the Power button.
If you can ever get Step One to complete on teh Cheetah Unlocker you should be able to confirm that the HardSPL is installed by turing off Today screen (Red, end button) , then hold the left side button while then pushing the reset button. You will get a tricolor screen that lists your SPL version. If it is HardSPL on an unlocked device and there is a CHEEIMG.nbh file on an inserted SD card it will then automatically go to a White boot screen .....
If any of this sounds foreign to you then you need to familiarize yourself in the Wiki re SD flashing
PS do you have the NetFramework 2.0 installed on your PC? When you start the CheetahUnlocker are you getting the Treo device confirmation to install the 2 boot exe files that let the Treo go to the boot screen (you have to answer yes to both of these) - are you making it that far?

Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.

artii said:
Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.
Click to expand...
Click to collapse
I'm not sure exactly what is happening in your case but I do know that once a device of any kind enters the bootloader - Active Sync dies - AS is part of the OS and that no longer exists after the bootloader starts, I.e. Windows Mobile isn't really running any longer. the AS connection just gets it started.

I'm not too sure either.
I've unlocked the phone which worked fine.
When I run the cheetahunlocker, it doensn't get past the first step.
Should I be running Hardspl first?

What rom works best with the Treo 750? Link please!!!
What rom are you wanting to use? I have Treo750_WM6.1_WWE_Lite, looking for a more stable rom. Please list some or link them.

I tried both roms
the lite one and the normal one. I must say that the normal one is more stable - with the lite I had to do a reset at least one per day. with the normal version I did not do a reset at all...

Hi, did you resolve this CONNECTION issue? I'm having exactly the same problem.
Anyone?

hey everyone... i have a problem similar to these i think. I'll explain
i've done the magic_unlocker and i can do the 1st step of the cheetahunlocker. treo reset automatically and when i try to flash the rom the trilinear screen doesn't change to the blue screen which is the screen of the rom flash
anybody now why?
i have cracked my head the hole day and a still can't do it :S

artii said:
Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.
Click to expand...
Click to collapse
If it goes into the bootloader then you should be good to go. Both 750s i unlocked did this. However, if done correctly, the phone should go to a light blue screen where you will press the power button and flashing should begin.

na1kkkk said:
hey everyone... i have a problem similar to these i think. I'll explain
i've done the magic_unlocker and i can do the 1st step of the cheetahunlocker. treo reset automatically and when i try to flash the rom the trilinear screen doesn't change to the blue screen which is the screen of the rom flash
anybody now why?
i have cracked my head the hole day and a still can't do it :S
Click to expand...
Click to collapse
Are you doing the SD method or Desktop? DO the SD method and it should begin flashing right away after the 1st step of cheetahunlocker.

Un-Do Root URGANT!!!

Now, Idk what the heck is wrong with my G1, but it is doing it. -_-
Ok, heres the WHOLE story so sit back and relax...
When I dound this app on atrackdog advertisment it said you could tether your G1 so you could give internet to like your computer or any other wireless picking devices. Now I thought "Hey, why don't I do this?" and so I did. When I launched the program, it said I needed a Root G1. Now, I tryed doing something with my Ipod once and I bricked it. Had to send it back to Apple and got a new one. Anyway, back to the story. I went to the XDA forums thingy were it showed you How To get root on a G1. So guess what I did? You know! lol I tryed to root my G1. Now I got threw ALL the steps were it said "You know have a rooted G1" and I was like YAY, but it ended up not working. I tryed 2 tethering apps that both said I still didnt have a rooted G1. Now that made me p.o'ed. So I try to fix it by downloading updates, renaming them update.zip and etc... ALL OF THEM did not work! I mean come on! The files were RC33 updates I found on the web. I talked to a guy on T-MObile Forums (a MOD named Chris) and he tryed to help me. He went on vacation for the weekend so I will try to fix it myself by asking you guys Back to the story, he told me (chris) that I need towait for a automaticly update during the day. Well I waited and got one. Everytime I try to update it it does the normal rutine. Resets, goes to the box unpacking software to the G1, swirly line, starts to load, and poof! I get a screen that has a tringle with a explimation mark in it. I ushally pressed the alt-l to see the list, aand then pressed alt-s to download from sd. Didnt work (probily becouse it is not coming from the sdcard, but from online ) so I reset phone. Chris (the mod) told me to wait on the screen becouse it might be just loading on there for the update. Well I waited for 3 hours and it stayed on the ! mark! So now I am stuck with a G1 that says it is and isnt rooted (maybe bricked, hope not becouse it still works...) and I REALLY need help!!!
Now I have restarted (meaning master reset) the thing 3 times already! I will do it again ONLY IF this is the only way it will work.
Please Help ASAP!

Yikes. Wall of text FTL. You should have sat down and distilled your entire narrative into a few cohesive sentences. It makes it easier for folks to help you if they can understand what yer sayin'.
Josh27 said:
(probily becouse it is not coming from the sdcard, but from online )
Click to expand...
Click to collapse
You can just put a standard update.zip onto the sdcard (use an external card reader) and Alt-S as normal. If for some reason you can't get the update.zip to work (for example if you already replaced the keys with testkeys) then the absolute end-all-complete-start-from-scratch is to use the DREAIMG.NBH file. Follow steps 1 through 6 in "Preparing to get root" at this thread. After that, you can apply official updates normally.
I suggest you not attempt to root your phone after you recover it.

you need to revert back to RC29, follow the instructions in this thread.
http://forum.xda-developers.com/showthread.php?t=442480
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAMIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry bootloader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
then you can up date to RC30 then to RC33 manually or just wait for the
phone to get the updates on its own.

* Note *
If you do not know how, or why..... DO NOT PROCEED...

CBowley said:
* Note *
If you do not know how, or why..... DO NOT PROCEED...
Click to expand...
Click to collapse
perfect sense!

untermensch said:
you need to revert back to RC29, follow the instructions in this thread.
http://forum.xda-developers.com/showthread.php?t=442480
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAMIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry bootloader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
then you can up date to RC30 then to RC33 manually or just wait for the
phone to get the updates on its own.
Click to expand...
Click to collapse
is DREAIMG.NBH file NOT ---> DREAMIMG.nbh

I can not count how many times that file has been called dreamimg.nbh lol

May i ask a question about updating after returning to original firmware. Since we can only revert back to original UK version firmware and i got my phone in aussie, would i get back my stg firmware after updating to the newest firmware?

Super Newbie Guide for MYTOUCH 3G going to cyanogen 4.1999

1st of all thanks to the following for helping me out:
MT3G
not4sakn
zapote21
thanks dudes APPRECIATE it keep up the good work.
For unrooting and rooting give thanks to theunlockr.com they are dedicated in helping those who need in help too.
making android experience a better place.
Bought a Brand New Mytouch 3g T-mobile USA: then this is what I did, flawless just follow this very newbie guide no chance of bricking your phone unless u did something beside this. but this is what i did. do it onyour own risk.
I made my own link i tested it, You have the freedom to get the file anywhere you want. But this link are tested, if you download link posted on other thread and brick your phone, thats your bad. So dont come back hereand point finger. (I will just look at you and smile)
A -Charge your phone FULLY CHARGE B4 Proceeding. (If it got low On battery?I have no idea whats gonna happen)
B -I did the UNROOTING even it is out of the box(why so if i got an update Mytouch I am sure Im in the stock original-rom)
1. Download sappimg.nbh (http://fdc6f33a.linkbucks.com)
2. Save the sappimg.nbh file to your SD card. As always, do not place it in any folder on the SD card.
3. Put the SD card into the phone and turn the phone on by holding down Volume Down and Power.
4. wait for it to pick up the Sappimg.nbh read if you need to confirm anything.
5. Push the trackball to begin, it should automatically update from there.Put the phone down dont shake it.
6. Once the flashing is fully complete, reboot the phone. DONE!
C -ROOT THE MYTOUCH
1. On your phone (MyTouch), goto Settings, Applications, and make sure Unknown source is checked ON.
2. On your phone, goto Settings, SD card and phone storage, and click Unmount SD card.
3. Then click Format SD card (it should automatically remount after this).
4. Plug the phone into the compuer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
5. Download this flashrec-1.1.2-20090909.apk(http://f44f9e26.linkbucks.com) and recovery-RA-dream-v1.2.3.zip(http://6cf64977.linkbucks.com) and save it to your computer:
6. copy them to your SD card (do NOT put them inside any folders on the SD card, just on the sdcard root).
7. Unplug the phone from the computer
8. Goto the Market and download Linda File Manager or any file manager program if you do not already have one.
9. Open the file manager and goto SDCard and then find the flashrec-1.1.2-20090909.apk and install it. choose Package Installer to open it.
10. Open the FlashRec program and click on Backup Recovery Image and wait to finish.
11. Once done, click on the empty text box in the FlashRec program and type:
/sdcard/recovery-RA-dream-v1.2.3.img
Then click on the Flash Custom RecoveryImage button and wait for it to finish.
12. Turn off the phone and turn it on into Recovery mode by holding down Home and Power(keep holding HOME until the recovery screen comes up has a bunch of text on a black background). So long as that screen comes up, you have done it.
D - Download HTC_ADP_1.6_DRC83_rooted_base.zip (http://796fbaec.linkbucks.com) and update-cm-4.1.9999-signed(http://0e9a0a2c.linkbucks.com). Put them on the root of the sd card.
E - Go to RECOVERY SCREEN.turn it on into Recovery mode by holding down Home and Power.
1. Partition your sd card using (Fat32/ext2/linux swap) press trackball then Home to confirm. w8 to complete!
2. Perform a WIPE(reset to factory default) w8 to complete!
3. Apply sdcard:choose zip: HTC_ADP_1.6_DRC83_rooted_base.zip w8 to complete!
4. Reboot (by choosing the top option then press trackball)
5. turn it on into Recovery mode by holding down Home and Power.
6. Apply sdcard:choose zip: update-cm-4.1.9999-signed.zip w8 to complete!
7. Reboot (by choosing the top option then press trackball)
8. Eat snack or drink gatorade
9. Give thanks to me by posting thank you I ve done it!
I did this on my new Mytouch and 3 Mytouch 3g of my friend I charge them 20$ lol.
If you want to change rom just do PROCEDURE E.
*Original partition value of doing a Fat32/ext2/linuxswap : Linux swap-32mb / ext2-500mb / Fat32-remainingsdcard space
(anyone can confirm this?)
On mine I did Linux swap-62mb / Ext2-1gb / Fat32 is the remaining of my 16gb class6 micro sdcard space.
I use some linux bootable cd that I formatted any partition just by sliding a bar, no more typing command.

haven't tried this yet... but im gonna say thank you in advance cause today was the day that i am gonna root a mytouch lol perfect timing my friend.
I will let you know when i am successful in doing so!!!

bored2nite said:
haven't tried this yet... but im gonna say thank you in advance cause today was the day that i am gonna root a mytouch lol perfect timing my friend.
I will let you know when i am successful in doing so!!!
Click to expand...
Click to collapse
Hey i just wanted to point out... in step 12 part D u put the two files on the root of sd card... then in E and or step 13 u mention to partition the sd card in fat32/ext2/swap.... when u do that it wipes the sd card to put the two files after you partition the card FYI.... the rest is looking good so far with ur guide..

well just tried it and goes thru green mytouch screen then the blue android logo -then just a blank screen with the backlight on. waited like 5 minutes-nothing... maybe it just takes a long time.. idk didn't see any errors and everything completed successfully except wont boot all the way.
**Update - I forgot to do a wipe *doh -- works great ! on mt3g --I did install the nbh from goldcard on first step though as I had 1.33.0006 perfected spl... Nice job on the walk through.

A noob who took the time to read and search and read and search and ya...this worked flawlessly on a week old MT3G.
Followed to a T...was a little slow on the green mytouch screen and the blue android screen but after that its worked like a charm...responsive, no issues.
A big thanks to rjan22, et. al.

Would this be exactly the same on a (Vodafone) HTC Magic? Got one off ebay yesterday and want to try the cyanogen rom. Cheers

you are the BOMB!!! thanks alot now i need to know if now since i have successfully rooted my mytouch can i just update a new rom without nething being affected.. thanks again

the marketplace doesnt seem to work =( everything else works flawlessly

Problem while installing CyanogenMod

Hello everyone,
I was trying to get working to last CyanogenMod by following this howto :
wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
My phone is a HTC Magic 32B ( compliant with howto needs )
So i have :
Erased by SD Card .... OK
Make my card a goldcard ... OK
Copy SAPPIMG.nhb to the SD ... OK
Applying update ... OK
Well ...
So now, i can't get ahead. I am stuck between step 6 and 7.
Step 6. Reboot when phone is done updating. You now have the one-click vulnerable version of the firmware.
The update was correctly realised, the phone has booted with the green splash screen "My Touch" and it asked me my google account ... Problem is that 3G is not activated ( the phone doesn't know my settings ... ) and i can't fill them.
Step 7. Load the Android Market and find/install "App Installer".
So, downloading an App via the market is impossible.
Moreover, the device is no more reconized by ADB ( and so with usb windows drivers ). And i can't load any "recover" in fastmode mode ( fastboot remote : not allow ).
Strange ..., my card was "goldened"
To sum up, i am a little bit lost ... Can you give me some advices or other good ways ?
My phone is actually unusable ...
Best regards,
trix

Press menu during setup and you will be able to add your carriers APN.

eyegor said:
Press menu during setup and you will be able to add your carriers APN.
Click to expand...
Click to collapse
Oh, well nice.
Thx a lot

[RECOVERY AND UPDATE] how to recover your SGS gt-i9000 Famous Black screen of death.

This is all thanks to the awesome threads on this website.. No credit of programming will be claimed by me.
*warning* this can be done only if you have a device that forces the samsung galaxy s g or gt i9000 to go in to download mode.
Ok so here is the story, when the samsung galaxy S froyo beta was out I kind of editted the regedit of samsung to be able to install it...
What I didn't know and wasn't noticed by anyone as I've surfed down google to the 200th pages... was that after the reg edit update the Volume down + home button + off switch combination falls of and will not work anymore.
So I waited untill it was out officially in the Netherlands (eindhoven)
What I did was the folowing:
I went to vodafone and they tried to update it. with the force device (big blue box with 12 buttons on it with the buttons 2 and 6 were clicked down).
When they tried to update the phone went off and it lost it's complete firmware. aka PHONE - ! - COMPUTER.. I went home and searched of the web and found here that there was a kind off update.zip. (when I find it I will edit this post and upload it) I downloaded the file and extracted the contents on a SD card. I went back to vodafone and let them force the phone in to download mode again. after that odin instantly recognized and updated the phone to Android 2.2 Froyo update for Galaxy S.
So here are the simple steps.
1. Don't panic.
2. Surf this forum for the update.zip if I still haven't uploaded it. and mainly search for the tag: black screen of death. or phone + ! + computer.
When you have the file. follow step 3.
3. Extract the contents of the update.zip file to the removable SD card of your phone with another device note like root:Sd/update/(files) but like root:sd/(files) the files must be directly available to the phone without having to be searching in to another folder. and plug the sd-card back in the phone.
4. If you have such blue device to force in to download mode then just use odin and update phone. if not, then go to the nearest and trustworthy phone store and make them force it into the download mode... and follow the rest of the steps.
5. step 5 is the most attention worthy part there is: Either bring your own laptop with the correct odin and the correct files and USB cable for when it's in download mode to update it. or either give it to the person behind the counter and let him update it.
6. When froyo is installed give it time to run and scan all it needs to do, otherwise it will lagg and only frustrate you.
7. after couple of minutes froyo is ready for use. after this.look for a reliable lagg fixer because froyo laggs the same way the mind of your mother-in-law does when you're trying to talk sense in to her mind...
If I'm correct after these steps you should be able to use your phone again and have froyo installed and working.
If this hasn't worked, then I advice to either repeat these steps (hence the bring your own laptop) or let the phone-store guy do his thing and force the install. REMEMBER these people usually give up after 1 or 2 try's but it's your phone and they don't care.. so just stand firm and say, I would like you to give it another try..and if he refuses. you can just tell him you won't leave untill he has done it over and over untill it's done or let you self try it and crawl behind the counter.
ALL CREDITS GO TO THE PEOPLE THAT HAVE WRITTEN THE PROGRAMS AND GIVEN ME THE OPPORTUNITY TO COMBINE THE STEPS AND FIX THIS.
But hey if you think the credits belong to me since I wrote this guide. then by all means

I can't access the recovery mode, but I can access the download mode. I also used the Kies registry hack to upgrade to 2.2.
Which update.zip file you are talking about? There are a million different ones!
I do not have an external SD card. Is it still possible to fix the phone? No offense but your solution doesn't really offer a solution at all. It only tells us to go somewhere else to get it fixed!
What is the correct Odin, what are the correct files? PIT, PDA, PHONE, CSC, update.zip? Links?