Related
Hi,
I'm sorry about this post but there seems to be an anormous amount of information which doesn't make a lot of sense to me.
All I want to do is upgrade my palm treo 750 from win5.0 to 6.1.
I've downloaded the rom but it doesn't upgarade. So I need to figure out a way to flash this phone so it can be upgraded to any roms.
I have tried the Cheetahunlocker which doens't work. It gets stuck on 0% then times out.
Could someone please give me some basic instructions on the best way to do this on the treo.
I've done this on the TYTN2 whith no issues however on this phone, it seems to be a lot harder.
Thanks in advance.
Your device needs to be unlocked. You can do this by calling ATT and getting unlock code or by using Magic_Unlocker.
search
Also you will need to have the HardSPL installed which is Step 1 only of the CheetahUnlocker
I just did it yesterday so I know it works.
After you get the phone unlocked, name the ROM .nbh file CHEEIMG.nbh and then put it on the SD card
The start the CheetahUnlocker process as it enters the HardSPL process it will go ahead and run the CHEEIMG file and flash your ROM
(it works ! ) DON"T CHANGE THE RADIO !!!!
After doing that be sure and reclaim your ROM space - search web for Removing Ext ROM and do that process, hard reset and you are ready to go
Takes about 15 min!
jcrompton said:
After you get the phone unlocked, name the ROM .nbh file CHEEIMG.nbh and then put it on the SD card
Click to expand...
Click to collapse
Thanks for your info.
sigh..
The rom is an exe file...
I downloaded 7-zip, extracted the rom to a folder.
Looking through it, I am unable find the ROM.nbh file!
CHEEMING.nbh is already there..
What am I doing wrong?
Thanks.
artii said:
Thanks for your info.
sigh..
The rom is an exe file...
I downloaded 7-zip, extracted the rom to a folder.
Looking through it, I am unable find the ROM.nbh file!
CHEEMING.nbh is already there..
What am I doing wrong?
Thanks.
Click to expand...
Click to collapse
Sorry I forgot it was already named CHEEIMG.nbh -- just use it like I said above.
Copy it to the SD card, put the SD card in the device and after you have used Magic_Unlocker , connect via Active Sync and start the CheetahUnlocker process. This will start the three step CheetahUnlock process (really all you need is step one which will put the HardSPL in place) as that process fails the CHEEIMG file on your SD card will get flashed.
Hope this makes sense
Bottom line is that you will be doing an SD flash of the CHEEIMG.nbh file but it takes HardSPL for that to work. Step one of the CheetahUnlocker installs HardSPL (that will be all you need of that process)
remember!
THE SD FLASHING METHOD TAKES A REALLY LONG TIME. SO LONG YOU MIGHT THINK IT'S BROKEN. BUT IT'S NOT!!!!
caps with bold and red= great way to emphasize an important point.
Thanks for the info but I'm still running into trouble.
I copied the file to the SDcard but when running the cheetahunlocker, it give the same error at 0% ( error 206) something about the connection..
I notice that active sync turns off when the cheetah unlocker goes to the coloured screen.
Edit:
Also, should I be moving the CHEEIMG.nbh or just copying it to the SD card?
Thanks.
artii said:
Thaks for the info but I'm still running into trouble.
I copied the file to the SDcard but when running the cheetahunlocker, it give the same error at 0% ( error 206) something about the connection..
I notice that active sync turns off when the cheetah unlocker goes to to the coloured screen.
Click to expand...
Click to collapse
Did you run the MagicUnlocker first?
Is the CHEEIMG.nbh file in the root of your SD card? Try re-formatiing your SD card (FAT32 important!) and then putting the CHEEIMG.nbh file in place on the root of the SD card.
After starting the CheetahUnlocker the TriColor screen should come on and then it should go to a standard White boot scan. It will ask if you want to flash and you will be asked to confirm by pushing the Power button.
If you can ever get Step One to complete on teh Cheetah Unlocker you should be able to confirm that the HardSPL is installed by turing off Today screen (Red, end button) , then hold the left side button while then pushing the reset button. You will get a tricolor screen that lists your SPL version. If it is HardSPL on an unlocked device and there is a CHEEIMG.nbh file on an inserted SD card it will then automatically go to a White boot screen .....
If any of this sounds foreign to you then you need to familiarize yourself in the Wiki re SD flashing
PS do you have the NetFramework 2.0 installed on your PC? When you start the CheetahUnlocker are you getting the Treo device confirmation to install the 2 boot exe files that let the Treo go to the boot screen (you have to answer yes to both of these) - are you making it that far?
Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.
artii said:
Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.
Click to expand...
Click to collapse
I'm not sure exactly what is happening in your case but I do know that once a device of any kind enters the bootloader - Active Sync dies - AS is part of the OS and that no longer exists after the bootloader starts, I.e. Windows Mobile isn't really running any longer. the AS connection just gets it started.
I'm not too sure either.
I've unlocked the phone which worked fine.
When I run the cheetahunlocker, it doensn't get past the first step.
Should I be running Hardspl first?
What rom works best with the Treo 750? Link please!!!
What rom are you wanting to use? I have Treo750_WM6.1_WWE_Lite, looking for a more stable rom. Please list some or link them.
I tried both roms
the lite one and the normal one. I must say that the normal one is more stable - with the lite I had to do a reset at least one per day. with the normal version I did not do a reset at all...
Hi, did you resolve this CONNECTION issue? I'm having exactly the same problem.
Anyone?
hey everyone... i have a problem similar to these i think. I'll explain
i've done the magic_unlocker and i can do the 1st step of the cheetahunlocker. treo reset automatically and when i try to flash the rom the trilinear screen doesn't change to the blue screen which is the screen of the rom flash
anybody now why?
i have cracked my head the hole day and a still can't do it :S
artii said:
Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.
Click to expand...
Click to collapse
If it goes into the bootloader then you should be good to go. Both 750s i unlocked did this. However, if done correctly, the phone should go to a light blue screen where you will press the power button and flashing should begin.
na1kkkk said:
hey everyone... i have a problem similar to these i think. I'll explain
i've done the magic_unlocker and i can do the 1st step of the cheetahunlocker. treo reset automatically and when i try to flash the rom the trilinear screen doesn't change to the blue screen which is the screen of the rom flash
anybody now why?
i have cracked my head the hole day and a still can't do it :S
Click to expand...
Click to collapse
Are you doing the SD method or Desktop? DO the SD method and it should begin flashing right away after the 1st step of cheetahunlocker.
** PLEASE, READ THE GUIDE BEFORE FLASHING **
Flashing a device is a risky process, and you definitively have to know that your device might not boot correctly, or not boot at all. You must also notice that this method is being tested and some components of your Polaris will not working at the moment. Take into consideration that there are developers that are sharing all their work with us, but although they're really good at their job, they all have their lives. So, if something just doesn't work, please, be patient*
NAND Boot for Polaris! Made possible thanks to DZO!
This method will allow you to start Android without the need of Windows Mobile. It will just boot like if the device had a native Android OS installed onto it.
- You may see this guide really long, but it's because I tried to detail every step and I put lots of URLs to make the process easier for beginners It's not than difficult as it seems!
Step by step guide:
Needless to say that you need to have HardSPLed your device first!
1. CHOOSE YOUR ANDROID BUILD
You can install try to install any build from the Kaiser and Vogue forums. They should work for Polaris:
I personally recommend to start with Myn's Warm Donut Release 5.
You can choose it in two different screen resolutions
240x320 (my favorite) - http://download219.mediafire.com/t0lnxmijgEjg/1drm2jqwjzn/myn-WarmDonut-04-24-2010-240x320-110.zip
320x480 - http://download533.mediafire.com/ml1jxoyomIDg/miw2uzjjzjq/myn-WarmDonut-04-24-2010-320x480-160.zip
If you want more info, check its thread: http://forum.xda-developers.com/showthread.php?t=619980
Download the build. It may be a compressed file containing an androidinstall.tar.
Copy this androidinstall.tar under a folder named andboot at the top level of your SD Card. The file path should be /andboot/androidinstall.tar.
You're now ready to flash the OS loader.
2. -OPTIONAL, BUT RECOMMENDED. ERASE YOUR ROM.
To be sure that you won't have problems with the flashing, you should use a tool that executes the called Task 29 to clean the NAND memory in the device. This helps the flashing goes OK and minimizes the chance of a bad flash.*
Fortunately, there's such tool: It can be downloaded HERE (big thanks to leppa).
It's a hacked flashing tool. To make it work you will have to select a dummy .NBH file. Use the .NBH file you want, preferably a small one. You can use the one that you will download in step 3.
You it finishes the operation, your phone will NOT boot. Don't worry. This is normal. We will make it boot soon.
More info HERE: http://forum.xda-developers.com/showthread.php?p=6227425#post6227425
3. FLASH THE ANDROID OS LOADER TO NAND
You will need a .NBH in order to boot from NAND. It's usually named polaimg-panel[x]-[resolution]-[date].nbh.
I personally recommend to flash of the .NBH files by DZO dated 07-May-2010. They are listed on his site: http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Choose one according to your paneltype and resolution. Your paneltype depends on its maker. You should try from 1 to 3 to see which one works for you.
Flash the .nbh file you downloaded with your prefered tool (I used CustomRUU.exe for Windows).
To flash your device you might have to put your Polaris in bootloader mode. To enter this mode you have to do the following:
Press and hold the camera button.
Press reset while you hold the camera button. Release it (the reset button).
Hold the camera button until the colored bars screen appears.
If it doesn't work, remove the battery, wait for some seconds, put it back and try again.
When the colored screen (Hard SPL) is shown, you are ready to flash it using the flashing application (CustomRUU.exe, for example).
4. INSTALL YOUR BUILD
When you're done flashing, your device will boot. You will now attempt to install your build using the file androidinstall.tar.
You'll see lots of text lines scrolling while it boots. Now, pay close attention to the next step.
The system will prompt you to press and hold the center button of the DPad (in the middle of the jog-wheel) to start the Android Installer. It's a message like "Press x to launch the installer". Don't forget to hold it until the installer is shown!
The installer will eventually start.
A list of options should appear (in text mode). Use the jog-wheel up and down to navigate. D-pad center to select.
Choose your installation options (I selected System on NAND, Data on NAND). Don't choose any other option unless you know what you're doing.
Install it! (if it ask you to wipe the data, select yes).
Wait for the installer to finish.
The menu should appear again.
5. INSTALL THE SPECIFIC UPDATES FOR POLARIS
Due to particularities in our devices, some hardware like Wi-Fi and Bluetooth won't work properly if you don't apply some updates first.
You will need a file an androidupdate.tar to apply to the just installed system.
You can download it HERE (thanks to l1q1d).
When applied, the installer will be shown again.
You now have to select Fix permissions to avoid problems.
Don't exit the installer: soft reset your Polaris instead.
YOU ARE DONE! Your Android system will boot after some minutes.
Things that should WORK:
Phone calls: incoming/outcoming
Texting (SMS)
Data connection (GPRS/3G)
Wi-Fi
GPS
Bluetooth
Things that DON'T WORK:
USB Storage Mode
USB debugging is unstable.
Tethering
Camera (in Eclair)
Headset
Bugs/Issues:
Sometimes Wi-Fi hangs while is being disabled and prevents the device from suspending correctly (it won't sleep and the screen will turn of every time you press a button).
Data connection goes down from time to time and it won't reconnect until you go to the Modem application, disconnect, connect again and wait it to connect.
Audio Input: faulty and unusable with most of applications that use it.
* Enjoy and feel free to donate to our GREAT developers.
* I donated to our developers, and I'm from Spain. As everybody know, Spain is falling like a fainted Pokémon thanks to Zapatero (Mr. Bean II). If I can donate, how couldn't you do it?
I'm trying now.. Sorry my english...
They state that it's valid also for HARET:
if you're doing it with haret, extract basefiles to your sd, plop the androidinstall.tar into the same folder, and boot, hold down volume up just like the nand people (but don't pick nand to store the files, it won't work)
Click to expand...
Click to collapse
I've tried with the specified basefiles and plemen's Android 2.1, but I had no luck.
I noticed that when I press run from HARET and the progress bar fills up, it vibrates two times. Then, it seems that the device is hung, but after 15 seconds (or more), it boots. However, I didn't complete the rootfs-less setup process. It complaints about this:
Unable to open persistent property directory /data/property errno: 2
Click to expand...
Click to collapse
Anyone?
Wait, does this mean its totally an Android ROM? If so, COOL!
haven't tried yet ^^
Did you take the last package on sourceforge for the Eclair 2.1 Build? The files on Mediafire was corrupted.
I think there is no speed improvement with this, it's "only" an easier way to install and upgrade the system.
This is NOT "totally an Android ROM".
i can't install with this method
is there a "how to" or forum thread somewhere cause i get
sh: 2: unknown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD Card
Click to expand...
Click to collapse
during setup it complains "cant create folder /system cause file already exist"
i put basefiles at the root of my sd card and the vogue .tar in a folder call /andboot
all taken from here http://sourceforge.net/projects/androidhtc/
I think that you must flash a nbh that only works in vogue yet. I try to flash but it stop at 33%. I think that we must wait.
luzbel_es said:
I think that you must flash a nbh that only works in vogue yet. I try to flash but it stop at 33%. I think that we must wait.
Click to expand...
Click to collapse
Yeah, same problem. It's impossible to flash now with any package for Vogue or Kayser...
We have to wait for DZO's work to port .tar and . NBH for us...
Hi fellas:
I carried out research about the new boot up method, and it seems it will be compatible with our beloved Polaris. But it still needs some fine-tuning, first of all due to the fact that the new installer is started holding down VolUp, but this button isn't correctly recognized with the current bits.
In other words, we should wait before trying out this one. Vilord is aware of this issue.
Stay tuned!
Hi SuperJmn,
Of course I wait for ...
I look every day in the Vogue/Kaiser thread and hope we can to flash our Polaris next time.
Thanks.
Android should work much more faster after flashing... Can't wait to try this
manu33xtro said:
Hi SuperJmn,
Of course I wait for ...
I look every day in the Vogue/Kaiser thread and hope we can to flash our Polaris next time.
Thanks.
Click to expand...
Click to collapse
Hey
I have pola100 with pcar latest non-3d, Im trying my luck to get android started but with the latest files (img, rootfs, zImage) I am not able to. tried hell lot of combinations.
can you suggest me which one would I use, I downloaded some from sourceforge!
but I read that the new rootfs is for nand....
please friends guide me to right downlaods and versions for a near perfect android installation
Thanks in advance....
Niranjan
Hi! The new method is not only for NAND, but also for SD booting. It has some incompatibilities, so it's working for Vogue for the moment (Vogue owners are a bit more lucky than us in terms of development).
We are waiting for @vilord, @DZO and other authorities to fix the appropriate files.
I will contact them right after I end up writing this
Updated information for NAND boot. Thanks DZO!
Can you give us some feedback? Does it run better, smoothier than before? Or nothing about that?
it work but this resolution is not userful for me. No more speed than haret method, wifi and camera not work, system freeze some times. Do you have this problems?
How to put device in bootloader
Hello,
I've installed Android on my POLA100 (NAND method). Until now it's working fine. When I tried to put my device in bootloader mode, after installing Android, surprise... the combination (camera button pressed + stylus reset) isn't working.
If you used this: Eclair build you should download this update too: update for qvga and put androidupdate.tar from this archive on the andboot folder on your sdcard near androidinstall.tar.
After installing the system like SuperJMN said you'll have to press the power button one more after system reboot and choose update... from the menu,then quit when the menu reappear.
WIFI,Camera,Bluetooth doesn't work on this build(the only one I've tested with this new method)
Thank you SuperJMN for posting this,I hope it will remain for a long time on the front page and many thanks to DZO,VILORD,JAMEZELLE,PLEMEN and all other guys for the hard work.
Polaris
Hi,
for polaris you push power button, and boot menu works(NAND and SD).
The issue is that Wifi is not working now.
I try several builds.
So it seems not depending on the system?
Regards
How to put device in bootloader
Solved it. I put my device in bootloader by pressing the camera button + stylus reset when Android loads. I don't know if it worked because I removed my SD card and on the screen appeared "Waiting for SD card" but in that moment I've reset the device in bootloader.
I was asked to port my Android Loader for the HD2 so that the HD Mini users could have the same benefits of automating the boot process. The result is this thread and I hope you can benefit from my work.
**PLEASE READ ALL THIS POST BEFORE DOWNLOADING AND INSTALLING THE APP TO AVOID ANY PROBLEMS**
**IF YOU HAVE ANY PROBLEMS PLEASE READ POST2 *HERE* BEFORE POSTING YOUR PROBLEM IN THE THREAD**
--------------------------------------
--------------------------------------
This Android Loader will allow you to do a few things. Firstly you can start Android easily once you are already in Windows. It comes with a cool looking icon in the Start Menu and you can add it to Sense or Mobile Shell or whatever you use as your day to day interface.
INSTALL THIS APP TO DEVICE MEMORY!! DO NOT INSTALL TO STORAGE CARD OR YOU MAY HAVE PROBLEMS!!
After installation you will be asked if you want a dual boot option after you start your phone. If you do then you can set your default Operating System (Android or Windows Mobile), then you will be asked for an AutoBoot timeout (3, 5, 10, 20, 30 or 60 seconds). You will then be asked which Icons you want to be displayed in the Start Menu (Android and Android AFTER a Soft Reset with no prompts). The 'Android with Soft Reset' icon will allow you to boot cleanly into Android straight after Windows Mobile finishes loading if you dont want a Dual Boot option.
Lastly you will be asked to select the Path where your Android files have been copied to. At the moment your Android files are copied to the ROOT of the 'STORAGE CARD' and this is what should be selected, unless they are moved in future Development updates of Android.
If you set up a Dual Boot option then after a soft reset of your phone, as soon as WindowsMobile loads up you will be prompted to choose what you want to boot into. If you make no selection then your default Operating System will be Auto loaded after the time out.
Last but by no means least there is a folder in the Start Menu called 'Android Loader' which holds a Manager app. With this app you can change any of the default settings. There are also 2 switches in this Start Menu Folder. Fast Mode will load Android as soon as the icon is clicked, Safe Mode will always ask for confirmation when the icon is clicked to avoid accidental loading.
When Android loader runs it will run Haret_Photon7227.exe after a 1 second delay which will start Android.
--------------------------------------
--------------------------------------
This app should work with ANY language Rom as a script searches for the correct name of the Storage Card when it is first run. If there are any problems with non WWE Roms then please let me know.
DONT ASK IN THIS THREAD ABOUT QUESTIONS OR PROBLEMS WITH ANDROID. THIS IS TO BE KEPT JUST ABOUT THE ANDROID LOADER.
--------------------------------------
--------------------------------------
Cab Useage:
1. Make sure you have your desired build of Android copied across to your Storage Card BEFORE installing this app.
2. INSTALL THE CAB TO DEVICE MEMORY (IN WINDOWS MOBILE)!! DO NOT INSTALL TO STORAGE CARD!!
3. You will now be asked if you want a prompt everytime you start WindowsMobile to run Android or continue to Windows. This is your Autoboot setting. If you select No then you wont get a prompt after WindowsMobile boots up.
4. You will now be asked which Android links you want displayed in the Start Menu (Android, Android with Soft Reset or Both).
5. You will now be asked select the folder where your Android files are copied to. THIS SHOULD BE SET TO STORAGE CARD (WITH NO SUB FOLDER)!! You only have to do this once, it will remember the settings until you uninstall the program.
NOTE: If your icons dont change in HTC Sense after upgrading the cab then install and run SICC (Sense Icon Cache Clearer) *HERE* and your new icon will be shown after a soft reset.
--------------------------------------
--------------------------------------
I made this as a favour to the HD Mini Community. If you find it useful you do not have to donate if you dont wish to but please hit the THANKS Button to show your appreciation.
Enjoy
Mark.
Problem Solving
To check your Settings you must have a Registry Editor installed on your Phone (free ones can be googled):
Browse to HKLM, Software, MSkipAndroidLoader
Check all the Sub Folders are set correctly
- AndroidFolder: Should be set to \Storage Card (or equivalent for your language),
- AutoTimeout: Duration til AutoBoot (in Seconds),
- BootupOS: Android or WindowsMobile,
- Mode: Fast or Safe,
- StartupOption: Yes or No
-----------------------------------------
-----------------------------------------
Android isn't loading:
Did you copy your Android files to the root of the Storage Card first? Yes
Did you install this app to DEVICE Memory? Yes. Are you Sure? YES.. Are you ABSOLUTELY SURE?? Ok maybe I installed it to Storage Card..
This App must be installed to DEVICE MEMORY or it could have problems. Uninstall the Loader from Start, Settings, System, Remove Programs and reinstall to DEVICE MEMORY.
-----------------------------------------
-----------------------------------------
I Installed to Storage Card by mistake and now it wont uninstall:
In your File Manager browse to Device, Program Files and Delete the MSkip Android Tools folder
Next using a Registry Editor browse to HKLM, Software and Delete the MSkipAndroidLoader folder
Lastly try reinstalling the Cab to DEVICE MEMORY (it should let you now)
-----------------------------------------
-----------------------------------------
If you have read through this and still have problems then post your problem in the thread and you will be helped
Mark.
thanks very much!!! nice app!!! finally got our dual boot!!!
ty ty ty mskip
and welcome to HD Mini forums
Nice one, mskip! Thanks!
tzacapaca said:
ty ty ty mskip
and welcome to HD Mini forums
Click to expand...
Click to collapse
Thanks
Although I dont own an HD Mini I'm happy to help wherever I can.
Mark.
works well! thanks a lot!
That's looks like great!
mSkip, Thanks for you and Welcome to your brother HTC HD2, HTC HD Mini
Thnx for the app, sounds great!
Installation works perfect. I just got a non-signed error af
ter reboot (testing the boot menu) but guess that I will have better luck next boot.
-- edit --
problem continues, also while trying to start from the start menu (android softreset), settings from folder do work..
Problem here. i install it and it works, but not from the start. I have choose android as default operation system, but it always starts up first windows mobile, and then nothing happends. I mus then click on the android icon and then android started. is this correct?
superzuan said:
Problem here. i install it and it works, but not from the start. I have choose android as default operation system, but it always starts up first windows mobile, and then nothing happends. I mus then click on the android icon and then android started. is this correct?
Click to expand...
Click to collapse
So you have Android set as the default on boot up? Does it say Android is set as default when the screen pops up? What time out do you have set? Which folder do you have set?
Do you have a registry editor app on your phone so you can check some settings for me?
Mark.
I come back tomorrow im now going to sleep
Sent from my HTC Liberty using XDA App
superzuan said:
Problem here. i install it and it works, but not from the start. I have choose android as default operation system, but it always starts up first windows mobile, and then nothing happends. I mus then click on the android icon and then android started. is this correct?
Click to expand...
Click to collapse
i had similar problem
in fact the folder was not setup correctly.
i fixed this thanks to the app folder in start menu, redefine it to my sdcard root, it works perfectly now
after install this cab my hd mini stuck at win loading..
i already install this apps into device memory.. and i choose Android and softreset.. my phone going restart n stuck at wndow loading.. never get back in normal.. when its goin sleep mode i press power button just blank screen appear.. what should i do? plz help me... i never can use my phone right now cause this problem..
northman5208 said:
i already install this apps into device memory.. and i choose Android and softreset.. my phone going restart n stuck at wndow loading.. never get back in normal.. when its goin sleep mode i press power button just blank screen appear.. what should i do? plz help me... i never can use my phone right now cause this problem..
Click to expand...
Click to collapse
Please give us more details as it is doubtful your issue is related to this Android Loader v1.0 cab. For example, is it the same result if you manually select Haret_Photon7227.exe from SDCard and start Android? Is it the same issue if you boot into Windows Mobile?
If you have only just installed Android to your HD Mini, perhaps you use the manual method for a few times so there are no booting issues. Without knowing the full details it could simply be that your files zImage, initrd.gz, system.ext2, STARTUP.TXT, HARET_PHOTON7227.exe and the update directory are NOT installed in your SDCard root directory ie. (SDCard\)
Wowser said:
Please give us more details as it is doubtful your issue is related to this Android Loader v1.0 cab. For example, is it the same result if you manually select Haret_Photon7227.exe from SDCard and start Android? Is it the same issue if you boot into Windows Mobile?
If you have only just installed Android to your HD Mini, perhaps you use the manual method for a few times so there are no booting issues. Without knowing the full details it could simply be that your files zImage, initrd.gz, system.ext2, STARTUP.TXT, HARET_PHOTON7227.exe and the update directory are NOT installed in your SDCard root directory ie. (SDCard\)
Click to expand...
Click to collapse
i never have problem to boot Haret from sdcard before this... my hd mini working just fine in android... i been try not to make its in sleep mode, but my phone is not stop loading even after 2hour.. its look like my phone be very2 slowly...
This is unusual as Android Loader v1.0 cab does not change the ROM bootloader. it merely automates the process of having to go into the SDCard then selecting Haret_Photon7227.exe. Maybe you could try the solution that -rObin- applied in post #13 and that is to make sure that Android Loader v1.0 setting is physically selected as the sdcard\ ie. Storage Card root. To change this you need to go into the windows mobile start menu folder called Android Loader (as explained in post #1) then select the Manager application to change the default directory to "Storage Card" then press OK.
Otherwise if this still does not fix things, please uninstall Android Loader v1.0 cab so the associated Android Loader v1.0 cab HKLM settings can be removed as well as the software, then try manually selecting Haret_Photon7227.exe from \SDCard directory and start Android. Is the result the same?
Wowser said:
This is unusual as Android Loader v1.0 cab does not change the ROM bootloader. it merely automates the process of having to go into the SDCard then selecting Haret_Photon7227.exe. Maybe you could try the solution that -rObin- applied in post #12 and that is to make sure that Android Loader v1.0 setting is physically selected as the sdcard\ ie. Storage Card root. To change this you need to go into the windows mobile start menu folder called Android Loader (as explained in post #1) then select the Manager application to change the default directory to "Storage Card" then press OK.
Otherwise if this still does not fix things, please uninstall Android Loader v1.0 cab so the associated Android Loader v1.0 cab HKLM settings can be removed as well as the software, then try manually selecting Haret_Photon7227.exe from \SDCard directory and start Android. Is the result the same?
Click to expand...
Click to collapse
I just do hard reset to my phone.. n everthing going back to normal.. and i manually selecting haret my phone just transfroms to andriod without any problem.. i really want this apps in my phone but for now i so scare to install its again in phone memory.. anyway thank for helping me bro...
pietje63 said:
Thnx for the app, sounds great!
Installation works perfect. I just got a non-signed error af
ter reboot (testing the boot menu) but guess that I will have better luck next boot.
-- edit --
problem continues, also while trying to start from the start menu (android softreset), settings from folder do work..
Click to expand...
Click to collapse
Problem is most likely that I did not read the instructions and installed the app on SD. Uninstallation does unfortunately not work (hangs) and reinstallation is therefore impossible..
pietje63 said:
Uninstallation does unfortunately not work (hangs) and reinstallation is therefore impossible..
Click to expand...
Click to collapse
try uninstalll from ActiveSync on windows, maybe it would work better?
Tools > Add/remove programs
Hi there,
Yesterday evening I have installed custom ROM - Revolution HD by following the instructions on XDA developers. But I have a really big problem now.
I think that my phone is unusable - It can boot but every 2 seconds I am getting this message "(process android.process.acore) has stopped unexpectedly". I can't do anything else because this is pops out.
Do you know how can I fix this - keep in mind that I can't access settings because of this pop thing ...
Now I am reading about NVflash but I am not sure if this is right for me ...
Best Regards
It means your sense launcher (Or other home launchers) has crashed. Reflash the rom - Shutdown the phone, pull the battery, reinsert battery, press and hold Power & volume down. Navigate to the directory the rom is in and flash it.
Also, you should post this in the DHD Q&A/General section.
314 said:
It means your sense launcher (Or other home launchers) has crashed. Reflash the rom - Shutdown the phone, pull the battery, reinsert battery, press and hold Power & volume down. Navigate to the directory the rom is in and flash it.
Also, you should post this in the DHD Q&A/General section.
Click to expand...
Click to collapse
reflash phone
Thank you for your post.
I followed your instructions but I'm quite afraid that my device is bricked.
Well, when I press volume - & power button the device vibrates 3 times and then the LED is blinking orange ... I can see that Windows have found some new software - when I check on Device Manager I can see a Qualcomm CDMA Technologies MSM and yellow triangle -> The drivers for this device are not installed ...
I've been looking all day long, reading hundreds of tutorials but still nothing ... Firstly, I was looking for the driver for Qualcomm but no success - I installed Windows Mobile Media Center but windows again said that the driver wasn't successfully installed. Therefore, yellow triangle still remains!!
Then I found a dozens of tutorials for flashing the device but all of them assume that I can achieve communication between PC and Desire - the problem is that I can't!!!
(http://forum.xda-developers.com/showthread.php?t=1054304)
Then I found some tutorial which says that I could re-flash the device by putting the ROM on SD card. (http://forum.xda-developers.com/showthread.php?t=1345273 - please check 3. post).
But what ROM to put on my device??? Here he was making a tutorial for Wildfire and naming some build for it (PB31IMG.zip). Is this some special name that determines the Wildfire? Do you know what is this name for Desire HD???
I really don't know what else to do and as I said I am quite afraid that my device is bricked.
P.S. I also found some tutorial for bricked devices. http://forum.xda-developers.com/showthread.php?t=691187
But this is so strange. Like they are explaining the same trouble that I have (Qualcomm ... and that there is no communication between PC and the device) and than assume that I have prepared GoldCard SD (http://android.modaco.com/topic/305672-creating-a-goldcard/)??? And, as I read a lot , goldcard can be made only with SD card in your device ->
I copied a part:
"Format the microSD card to FAT32 format.
Put the microSD card in your device and boot it.
Ensure you have unzipped the SDK, then open a command prompt to the extract location. Change to the 'tools directory.
Enter 'adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid' and press enter. You should get a very long number which looks like this: 532600bd227d9c0347329407514d5402."
But have can I do this if I can't access my device through my PC????? (somebody is stupid here, and I am not for sure )
Dear Friends,
Yesterday I connected my Verizon HTC M8 to Laptop , I got a POP UP from HTC SYNC Manager to Upgrade , Once I accepted it downloads a file with 2gb in backend and upgrading process has started .
But upgrade process failed in middle with Error Message "Upgrade unsuccessful " , tried restarting mobile but I got only HTC Logo with White Screen.
Please help me to restore back to Previous condition , Its Official , S-ON , Stock , RUU ( haven't done any modification). Im able to go to Recovery , Is there any possibility to restore from SD Card? If so Please Any Original Stock Recovery(ROM) available for Verizon ?
Thanks and Regards
Sathish
Better than the rest
Okay, you can pray to me later.
I had the same problem. I tried literally everything with the phone. I even tried to sell it and use it as a coke table :v
So thing is that, I don't know what's that called, fried / baked / boiled, but you effed up. So did I :v
Step One:
Stop Crying!
Step Two:
Really! Stop
Step Three:
Go to google (sigh!)
Step Four:
Search for "DOTTAT_VZWM8_S_ON_5.0.1_RUU"
.androidfilehost.com/?fid=95916177934540511
androidfilehost.com/?w=files&flid=13601&sort_by=date&sort_dir=DESC
Step Five:
Download
The remaining steps:
1. Format a memory card to FAT32 file system
2. Copy the "DOTTAT_VZWM8_S_ON_5.0.1_RUU.zip" to the card
3. Rename the "DOTTAT_VZWM8_S_ON_5.0.1_RUU.zip" to "0P6BIMG.zip"
4. Insert card in phone
5. Get into Bootloader
6. The phone should automatically recognize the "0P6BIMG.zip" and start unpacking and updating
7. Pray to God!
8. Smile as the phone comes back to life
9. Thank me
Should any of these files be removed from the server, I might be able to upload it, but since my upload speed is ~18KBPs I'd rather have you search for it.
Thanks a lot Bro.. Its Worked ...
I like the way you explained
xAWG said:
Okay, you can pray to me later.
I had the same problem. I tried literally everything with the phone. I even tried to sell it and use it as a coke table :v
So thing is that, I don't know what's that called, fried / baked / boiled, but you effed up. So did I :v
Step One:
Stop Crying!
Step Two:
Really! Stop
Step Three:
Go to google (sigh!)
Step Four:
Search for "DOTTAT_VZWM8_S_ON_5.0.1_RUU"
.androidfilehost.com/?fid=95916177934540511
androidfilehost.com/?w=files&flid=13601&sort_by=date&sort_dir=DESC
Step Five:
Download
The remaining steps:
1. Format a memory card to FAT32 file system
2. Copy the "DOTTAT_VZWM8_S_ON_5.0.1_RUU.zip" to the card
3. Rename the "DOTTAT_VZWM8_S_ON_5.0.1_RUU.zip" to "0P6BIMG.zip"
4. Insert card in phone
5. Get into Bootloader
6. The phone should automatically recognize the "0P6BIMG.zip" and start unpacking and updating
7. Pray to God!
8. Smile as the phone comes back to life
9. Thank me
Should any of these files be removed from the server, I might be able to upload it, but since my upload speed is ~18KBPs I'd rather have you search for it.
Click to expand...
Click to collapse