Database Info

[How-To] Flash Your MT3G/Magic/Sapphire {32B} w/ CM 4.2.14.1 + Amon RA Rec v1.5.2

DISCLAIMER
Proceed at your own risk. I am not responsible for ANY outcome (good or bad) as a result of YOUR actions! Even following this guide perfectly (or any other cooked ROM guide) you could (however remote the possibility) BRICK your device. IF you choose to follow this guide READ all the way through as a "dry run" until all the steps make some sense.
GATHER YOUR SUPPLIES
Phone (fully charged)
SD card (in your phone)
Computer (w/internet access)
USB cable (one that fits your phone) OR a card reader + micro SD adapter
Download these files onto your pc:
Android 1.5 base image SAPPIMG.nbh_____________________(33d958062cc02bb2cec157f68621d2ff)
To install ALT recovery flashrec _________________________(try the latest, if it fails work backward)
Alternate Recovery img recovery-RA-sapphire-v1.5.2G.img___(md5sum - 4822fd118867bb2e66a53243a408f40e)
Android 1.6 base image DRC83_base_defanged.zip__________(md5sum - 081379e9b525484bcd1ee42bd0031a4c)
CyanogenMod Rom img CyanogenMod ROM of choice________(4.2.14.1 md5sum - c2a1e549d9296d97566e86a0a1c4bc9c)
Android ring tone pack audio-resources.zip________________(md5sum - 6cbefb897e2fb3b954d19c692d5c6966)
32A users I am researching the right files/steps to get ya'll onto CM, read this page of cyanogenmod wiki in the meantime
[*]32B UK users if my method doesn't work try this post from a user on this thread
(NOTE: If any of these links 'die' Google the file name & pm me so I can update the link)
Md5sum Values
how to check md5sum in windows : MD5summer use this program to make an md5sum file & compare values
how to check md5sum in unix/linux : in terminal type 'md5sum /path/to/file.name' [enter] & compare values
Do this once the files are on your SD card to ensure no device-to-device file transfer corruption​
BACK UP YOUR FILES
Before doing ANY mods you should ALWAYS backup your important files.
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy any & all files/folders you want to keep.
On the pc: Close the SD card folder on your pc.
On the phone: pull down the notification bar & press ->USB Connected->Un-mount/Turn off USB storage. Once this is done remove USB cable.
(NOTE: By the end of this guide EVERYTHING on your card will be GONE so don't skip this step!)
FORMAT SD CARD
From the home screen press Menu->Settings->SD card & phone storage->Un-mount SD card.
Once it is un-mounted press ->Format SD card.
Once it is formatted & has re-mounted go back to the home screen and press Menu->Settings->Applications->make sure 'Unknown sources' is checked.
(NOTE: if your phone is already ROOTED & running a Custom/Cooked ROM you can likely skip the SETUP section just check Amon_RA's thread for alternate install options)
SETUP
Find out what version of Android your phone has installed. From the home screen Press Menu->Settings->About phone-> scroll to Firmware Version.
(this is your Android Version)
If you're on Android 1.5 proceed to INSTALL section.
If you're on Android 1.6 re-connect phone to pc.
Copy the sappimg.nbh & place it on your SD card, then close everything & disconnect USB. (I am told this MUST be the only file on your SDcard or the validation will fail)
Turn off phone.
Boot into 'Fast Boot' like this: Press-&-Hold END/Power AND Pres-&-Hold Volume Down until the Fast Boot screen appears.
Press the trackball (action button) and wait for it to flash the sappimg.nbh
Once fully complete reboot phone & proceed to INSTALL section.
INSTALL
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy the FlashRec.apk & the Amon RA recovery.img onto your SD card.
If you don’t have a ‘file manager’ or ‘app manager’ go to the market & download one such as: ASTRO, LINDA, AppManager or the like. Then browse to your SD card & open/run the flashrec.apk to install it. (if asked what to open with choose Package Installer)
Open RecoveryFlash (flashrec) & make a backup of your current recovery.img. Flashrec just made "recovery-backup.img" on the root of your SDcard, so now rename Amon Ra's recovery to "recovery-backup.img" (choose replace when the dulpicate file name message appears) then open flashrec again & choose restore recovery. (Credit for this step goes to deb82swearingen Much easier then the orig method I was shone for using flashrec)
Once the flash is complete turn the phone off.
Boot into 'Recovery' like this: Press-&-Hold END/Power AND Pres-&-Hold Home. (this will be a black background with green text options)
Scroll down to ‘partition’ (press trackball to select)->partition SD->follow onscreen steps (HOME=confirm, VOL +/- changes partition size, any other key=cancel).
Once partitioning is complete press BACK to get to partition menu & scroll down to 'SD:ext2 to ext3’ press trackball to select (if you have a class 4 or 6 SD card you can then go for 'SD:ext3 to ext4' but don't try it on class2 cards it will cause system instability & likely FRY your SD card... if you don't know your class stop @ ext3).
go BACK until top says "Android system recovery" ->Connect phone to pc & scroll to 'USB-MS toggle'->HOME to confirm.
Copy the HTC 1.6 BASE & CyanogenMod ROM & Contacts.apk files onto your SD card then close the SD card folder on your PC & toggle USB-MS again, then disconnect from the pc.
Scroll to & select ‘wipe'->wipe data partition->CONFIRM
Scroll to & select ‘Flash update image->Apply sdcard:choose zip & select the HTC BASE file & let it complete (this will take a few min be patient). DO NOT REBOOT!
Scroll to & select ‘Flash update image->Apply sdcard:choose zip & select the CyanogenMod file & let it complete (this will take a few min be patient).
Once the flash is complete reboot phone (this will take up words of 5-10min+ be patient).
Once up & running on latest CyanogenMod connect to pc again & unzip the audio-resources.zip directly onto your SD card.
**************************Only Applies To CM 4.2.13**************************
Fixed Contacts.apk
Now that you have 4.2.13 installed it's time to fix the bug listed in Cyan's change-log. We will do this by replacing the broken Contacts app with the fixed Contacts.apk that you downloaded. If you get a pop-up asking about giving super user rights just hit the check mark to remember this answer & press 'yes'. This is UNIX & UNIX is unforgiving so pay attention to all punctuation, symbols, UPPER CASE & lower case. They are different & if you don't do it exactly it won't work. (UNIX assumes that you know what you want it to do so it will do whatever you tell it to, even if what you tell it to do breaks it.) So long as you are able to type what you see this is easy
Open Terminal Emulator & type these lines (hitting enter at the [E])
su [E]
mount -o rw,remount /system [E]
cp /sdcard/Contacts.apk /system/app/Contacts.apk [E]
mount -o ro,remount /system [E]
reboot [E]
(The reboot is precautionary but generally a good idea anytime you replace /system files.)
**************************************************************************
Themes/Modding
Now for those not fond of the plain Android theme you may enjoy this little app that has a growing movement backing it, read about what MetaMorph is here and then see the fast growing list of 'morphs/themes' available here.
Signatures
Now that you're a part of the modding community please For The Love Of MODDING take a moment to put the specs for your phone/ROM/theme/etc into your sig so that in the future if you have questions those of us who try to answer you don't have to play forum tag to get this basic info from you.
~psguardian

P.S. THANKS fhaines !!!!
fhaines spent days sifting through the forums to pick all these tidbits out of the masses of G1 ROM flashing posts & forwarded it to me so I could flash my MT3G, I want to say thank you to fhaines for his hard work. I just worked out the formatting & simplified the verbiage to as plain English as I could. Hope this helps those who are a bit timid to test the CM Rom waters (as I was).

Is it required to partition the sdcard, or is that just for Apps2SD & swap?

lupascu.marius: It's only if you want to use Apps2SD and swap.

Apps2sd and swap
Wysie said:
lupascu.marius: It's only if you want to use Apps2SD and swap.
Click to expand...
Click to collapse
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines

fhaines said:
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines
Click to expand...
Click to collapse
is it possible to just create an ext3/ext4 and swap only without using apps2sd? Or do i need a fat32 partition?
If I am not wrong the has to be rooted to apply cm? In which step of this tutorial does the phone gets root?

Nicely done!
A few days too late for me, unfortunately, but it's nice to know that I ended up with essentially the same procedure. My notes are quite a bit more disjointed than your instructions, however.
It'll be a good refresher once it's time to root my wife's phone, however.

Great Resource for noobs and advanced alike
I believe this should be stickied.

Damn you beat me to it. I have been looking for WEEKS on a sure fire way to root my MyTouch 3G. I tried the Relentless Rooter, the Gold Card method and everything else I could find to throw at this thing.
The steps outlined here are slightly different from what I did, but all in all, this is what worked for me, was nice, easy and worked great. The first time you Root a phone it takes a bit to get the process down, but it's not as hard as you think.
If this hasn't been stickied, it needs to be!

Looks good but I have a few questions.
I am currently running on CM 4.1.999 (1.6) and my phone is running very smoothly. I tried 4.1.9999 but it started to bog down and seriously slowed down. I've got quite a few apps and I've got the phone set up as I like it (including changing some of the icons with bettercut and that kind of stuff) I'm getting to the point where I'm a bit loathe to go through all that again, so my question is; what are the real world advantages I might enjoy if I "upgraded" to 4.2?

palexr said:
Looks good but I have a few questions.
I am currently running on CM 4.1.999 (1.6) and my phone is running very smoothly. I tried 4.1.9999 but it started to bog down and seriously slowed down. I've got quite a few apps and I've got the phone set up as I like it (including changing some of the icons with bettercut and that kind of stuff) I'm getting to the point where I'm a bit loathe to go through all that again, so my question is; what are the real world advantages I might enjoy if I "upgraded" to 4.2?
Click to expand...
Click to collapse
Have you tried CM updater? It can be downloaded from the market and should just upgrade your current rom.

Weemoney said:
Have you tried CM updater? It can be downloaded from the market and should just upgrade your current rom.
Click to expand...
Click to collapse
OK, thanks, I thought it had been switched off so to speak after the Google episode.
My main question remains though, are there any benefits? I know, I know, go and look at the thread in the Dream section but still, CM4.1.999 really does work very well on my Magic and I think it deserves representation here.
Allied to a good theme it is by far and away the best ROM for the Magic IMHO.

Im running it now and have no issues. It is very fast and reliable. I think its worth the upgrade.

Right You Are
smurf said:
If I am not wrong the has to be rooted to apply cm? In which step of this tutorial does the phone gets root?
Click to expand...
Click to collapse
You do need to be rooted to apply a CM ROM (or any other 'cooked ROM' I think), HERE is where you are officially Rooted as I understand the process.
psguardian said:
INSTALL
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy the FlashRec.apk & the Amon RA recovery.img onto your SD card.
If you don’t have a ‘file manager’ or ‘app manager’ go to the market & download one such as: ASTRO, LINDA, AppManager or the like. Then browse to your SD card & open/run the flashrec.apk to install it. (if asked what to open with choose Package Installer)
Open RecoveryFlash (flashrec) & press Backup Recovery Image.
Once it’s finished press in the text box & clear out the box, then put /sdcard/recovery-RA-dream-v1.2.3.img & press Flash Custom Recovery Image.
Once the flash is complete turn the phone off.
Boot into 'Recovery' like this: Press-&-Hold END/Power AND Pres-&-Hold Home. (this will be a black background with a screen full of options)
Scroll down to ‘part SD fat32+ext2+swap’ press trackball to select.
Once partitioning is complete scroll down to ‘then select convert ext2 to ext3’ press trackball to select.
Reboot phone.
Connect phone to pc after reboot & mount USB storage
Copy the HTC ADP 1.6 DRC83 & CyanogenMod 4.2.2 ROM files onto your SD card then disconnect from the pc & turn off phone.
Boot into 'Recovery', scroll to & select ‘nandroid backup’ & let it complete.
Scroll to & select ‘wipe data/factory reset’ & let it complete.
Scroll to & select ‘apply SD card: choose zip’ and select the HTC ADP file & let it complete (this will take a few min be patient).
Scroll to & select ‘apply SD card: choose zip’ and select the CyanogenMod file & let it complete (this will take a few min be patient).
Once the flash is complete reboot phone (this will take up words of 5min+ be patient).
Once up & running on latest CyanogenMod connect to pc again & unzip the audio-resources.zip onto your SD card.
Click to expand...
Click to collapse

fhaines said:
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines
Click to expand...
Click to collapse
Quick question, I've followed the procedure posted on here step by step exactly and once I boot the phone up right after the android loading screen it goes to a black screen and sits there for a long time. Here's a thread I started asking for help with this, it has more info on my problem, thanks for anyone trying to help.
http://forum.xda-developers.com/showthread.php?t=578208

Things to check
lupascu.marius said:
Quick question, I've followed the procedure posted on here step by step exactly and once I boot the phone up right after the android loading screen it goes to a black screen and sits there for a long time. Here's a thread I started asking for help with this, it has more info on my problem, thanks for anyone trying to help.
http://forum.xda-developers.com/showthread.php?t=578208
Click to expand...
Click to collapse
Hey,
Couple of things to check and make sure of. You have to be on factory 1.5 before doing the upgrade to the Rooted HTC rom and Cyanogens rom, cannot do this from 1.6. Also, there is a wipe involved in the process, and if its skipped it may account for the FC's. Also there is a fix permission file you can run after installation and initial boot that may help with the FC's, its located in CM's thread in the Dream section where the rom is.
Fhaines

fhaines said:
Hey,
Couple of things to check and make sure of. You have to be on factory 1.5 before doing the upgrade to the Rooted HTC rom and Cyanogens rom, cannot do this from 1.6. Also, there is a wipe involved in the process, and if its skipped it may account for the FC's. Also there is a fix permission file you can run after installation and initial boot that may help with the FC's.
Fhaines
Click to expand...
Click to collapse
Yes, it is on the factory cupcake build when i start to try and install CM. The weird thing is i have had Cyanogenmod for a long time and have been doing upgrades and everything worked untill now. I upgraded to CM 4.2.1 and after that CM stopped working on my phone. I can confirm that 'other' rooted roms do work..so it seems like its just CM. Thanks

lupascu.marius said:
Yes, it is on the factory cupcake build when i start to try and install CM. The weird thing is i have had Cyanogenmod for a long time and have been doing upgrades and everything worked untill now. I upgraded to CM 4.2.1 and after that CM stopped working on my phone. I can confirm that 'other' rooted roms do work..so it seems like its just CM. Thanks
Click to expand...
Click to collapse
Quick update for anyone with any ideas. I finally got it to boot up and it runs great except for two things I've notices so far. When i try to add widgets nothing pops up and when i go to settings the window comes up for half a second then goes away and back to home screen. Now what I did to fix it was partition the sd card which i was told is NOT necessary. Then after i got it to work i tried again with a sdcard that was NOT partitioned and it did the same thing again, black screen no-go. So it seems like if you don't partition the sdcard on some phones the phone freezes at a black screen. Keywords being "some phones". So for anybody who knows how to fix the widget and settings problems not opening, please help me....Thanks

lupascu.marius said:
Quick update for anyone with any ideas. I finally got it to boot up and it runs great except for two things I've notices so far. When i try to add widgets nothing pops up and when i go to settings the window comes up for half a second then goes away and back to home screen. Now what I did to fix it was partition the sd card which i was told is NOT necessary. Then after i got it to work i tried again with a sdcard that was NOT partitioned and it did the same thing again, black screen no-go. So it seems like if you don't partition the sdcard on some phones the phone freezes at a black screen. Keywords being "some phones". So for anybody who knows how to fix the widget and settings problems not opening, please help me....Thanks
Click to expand...
Click to collapse
I don't think it has anything to do with SD partition type. Im running cm with a fat sd. everything's fine.

Nice lil issue...
Once it’s finished press in the text box & clear out the box, then put /sdcard/recovery-RA-dream-v1.2.3.img & press Flash Custom Recovery Image
I dont have this option when i try to flash the .img
it says Download Recovery Image and it is actually grayed out??

[Android] NAND Boot Method for Polaris: FLASH IT!

** PLEASE, READ THE GUIDE BEFORE FLASHING **
Flashing a device is a risky process, and you definitively have to know that your device might not boot correctly, or not boot at all. You must also notice that this method is being tested and some components of your Polaris will not working at the moment. Take into consideration that there are developers that are sharing all their work with us, but although they're really good at their job, they all have their lives. So, if something just doesn't work, please, be patient*
NAND Boot for Polaris! Made possible thanks to DZO!
This method will allow you to start Android without the need of Windows Mobile. It will just boot like if the device had a native Android OS installed onto it.
- You may see this guide really long, but it's because I tried to detail every step and I put lots of URLs to make the process easier for beginners It's not than difficult as it seems!
Step by step guide:
Needless to say that you need to have HardSPLed your device first!
1. CHOOSE YOUR ANDROID BUILD
You can install try to install any build from the Kaiser and Vogue forums. They should work for Polaris:
I personally recommend to start with Myn's Warm Donut Release 5.
You can choose it in two different screen resolutions
240x320 (my favorite) - http://download219.mediafire.com/t0lnxmijgEjg/1drm2jqwjzn/myn-WarmDonut-04-24-2010-240x320-110.zip
320x480 - http://download533.mediafire.com/ml1jxoyomIDg/miw2uzjjzjq/myn-WarmDonut-04-24-2010-320x480-160.zip
If you want more info, check its thread: http://forum.xda-developers.com/showthread.php?t=619980
Download the build. It may be a compressed file containing an androidinstall.tar.
Copy this androidinstall.tar under a folder named andboot at the top level of your SD Card. The file path should be /andboot/androidinstall.tar.
You're now ready to flash the OS loader.
2. -OPTIONAL, BUT RECOMMENDED. ERASE YOUR ROM.
To be sure that you won't have problems with the flashing, you should use a tool that executes the called Task 29 to clean the NAND memory in the device. This helps the flashing goes OK and minimizes the chance of a bad flash.*
Fortunately, there's such tool: It can be downloaded HERE (big thanks to leppa).
It's a hacked flashing tool. To make it work you will have to select a dummy .NBH file. Use the .NBH file you want, preferably a small one. You can use the one that you will download in step 3.
You it finishes the operation, your phone will NOT boot. Don't worry. This is normal. We will make it boot soon.
More info HERE: http://forum.xda-developers.com/showthread.php?p=6227425#post6227425
3. FLASH THE ANDROID OS LOADER TO NAND
You will need a .NBH in order to boot from NAND. It's usually named polaimg-panel[x]-[resolution]-[date].nbh.
I personally recommend to flash of the .NBH files by DZO dated 07-May-2010. They are listed on his site: http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Choose one according to your paneltype and resolution. Your paneltype depends on its maker. You should try from 1 to 3 to see which one works for you.
Flash the .nbh file you downloaded with your prefered tool (I used CustomRUU.exe for Windows).
To flash your device you might have to put your Polaris in bootloader mode. To enter this mode you have to do the following:
Press and hold the camera button.
Press reset while you hold the camera button. Release it (the reset button).
Hold the camera button until the colored bars screen appears.
If it doesn't work, remove the battery, wait for some seconds, put it back and try again.
When the colored screen (Hard SPL) is shown, you are ready to flash it using the flashing application (CustomRUU.exe, for example).
4. INSTALL YOUR BUILD
When you're done flashing, your device will boot. You will now attempt to install your build using the file androidinstall.tar.
You'll see lots of text lines scrolling while it boots. Now, pay close attention to the next step.
The system will prompt you to press and hold the center button of the DPad (in the middle of the jog-wheel) to start the Android Installer. It's a message like "Press x to launch the installer". Don't forget to hold it until the installer is shown!
The installer will eventually start.
A list of options should appear (in text mode). Use the jog-wheel up and down to navigate. D-pad center to select.
Choose your installation options (I selected System on NAND, Data on NAND). Don't choose any other option unless you know what you're doing.
Install it! (if it ask you to wipe the data, select yes).
Wait for the installer to finish.
The menu should appear again.
5. INSTALL THE SPECIFIC UPDATES FOR POLARIS
Due to particularities in our devices, some hardware like Wi-Fi and Bluetooth won't work properly if you don't apply some updates first.
You will need a file an androidupdate.tar to apply to the just installed system.
You can download it HERE (thanks to l1q1d).
When applied, the installer will be shown again.
You now have to select Fix permissions to avoid problems.
Don't exit the installer: soft reset your Polaris instead.
YOU ARE DONE! Your Android system will boot after some minutes.
Things that should WORK:
Phone calls: incoming/outcoming
Texting (SMS)
Data connection (GPRS/3G)
Wi-Fi
GPS
Bluetooth
Things that DON'T WORK:
USB Storage Mode
USB debugging is unstable.
Tethering
Camera (in Eclair)
Headset
Bugs/Issues:
Sometimes Wi-Fi hangs while is being disabled and prevents the device from suspending correctly (it won't sleep and the screen will turn of every time you press a button).
Data connection goes down from time to time and it won't reconnect until you go to the Modem application, disconnect, connect again and wait it to connect.
Audio Input: faulty and unusable with most of applications that use it.
* Enjoy and feel free to donate to our GREAT developers.
* I donated to our developers, and I'm from Spain. As everybody know, Spain is falling like a fainted Pokémon thanks to Zapatero (Mr. Bean II). If I can donate, how couldn't you do it?

I'm trying now.. Sorry my english...

They state that it's valid also for HARET:
if you're doing it with haret, extract basefiles to your sd, plop the androidinstall.tar into the same folder, and boot, hold down volume up just like the nand people (but don't pick nand to store the files, it won't work)
Click to expand...
Click to collapse
I've tried with the specified basefiles and plemen's Android 2.1, but I had no luck.
I noticed that when I press run from HARET and the progress bar fills up, it vibrates two times. Then, it seems that the device is hung, but after 15 seconds (or more), it boots. However, I didn't complete the rootfs-less setup process. It complaints about this:
Unable to open persistent property directory /data/property errno: 2
Click to expand...
Click to collapse
Anyone?

Wait, does this mean its totally an Android ROM? If so, COOL!

haven't tried yet ^^
Did you take the last package on sourceforge for the Eclair 2.1 Build? The files on Mediafire was corrupted.
I think there is no speed improvement with this, it's "only" an easier way to install and upgrade the system.
This is NOT "totally an Android ROM".

i can't install with this method
is there a "how to" or forum thread somewhere cause i get
sh: 2: unknown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD Card
Click to expand...
Click to collapse
during setup it complains "cant create folder /system cause file already exist"
i put basefiles at the root of my sd card and the vogue .tar in a folder call /andboot
all taken from here http://sourceforge.net/projects/androidhtc/

I think that you must flash a nbh that only works in vogue yet. I try to flash but it stop at 33%. I think that we must wait.

luzbel_es said:
I think that you must flash a nbh that only works in vogue yet. I try to flash but it stop at 33%. I think that we must wait.
Click to expand...
Click to collapse
Yeah, same problem. It's impossible to flash now with any package for Vogue or Kayser...
We have to wait for DZO's work to port .tar and . NBH for us...

Hi fellas:
I carried out research about the new boot up method, and it seems it will be compatible with our beloved Polaris. But it still needs some fine-tuning, first of all due to the fact that the new installer is started holding down VolUp, but this button isn't correctly recognized with the current bits.
In other words, we should wait before trying out this one. Vilord is aware of this issue.
Stay tuned!

Hi SuperJmn,
Of course I wait for ...
I look every day in the Vogue/Kaiser thread and hope we can to flash our Polaris next time.
Thanks.

Android should work much more faster after flashing... Can't wait to try this

manu33xtro said:
Hi SuperJmn,
Of course I wait for ...
I look every day in the Vogue/Kaiser thread and hope we can to flash our Polaris next time.
Thanks.
Click to expand...
Click to collapse
Hey
I have pola100 with pcar latest non-3d, Im trying my luck to get android started but with the latest files (img, rootfs, zImage) I am not able to. tried hell lot of combinations.
can you suggest me which one would I use, I downloaded some from sourceforge!
but I read that the new rootfs is for nand....
please friends guide me to right downlaods and versions for a near perfect android installation
Thanks in advance....
Niranjan

Hi! The new method is not only for NAND, but also for SD booting. It has some incompatibilities, so it's working for Vogue for the moment (Vogue owners are a bit more lucky than us in terms of development).
We are waiting for @vilord, @DZO and other authorities to fix the appropriate files.
I will contact them right after I end up writing this

Updated information for NAND boot. Thanks DZO!

Can you give us some feedback? Does it run better, smoothier than before? Or nothing about that?

it work but this resolution is not userful for me. No more speed than haret method, wifi and camera not work, system freeze some times. Do you have this problems?

How to put device in bootloader
Hello,
I've installed Android on my POLA100 (NAND method). Until now it's working fine. When I tried to put my device in bootloader mode, after installing Android, surprise... the combination (camera button pressed + stylus reset) isn't working.

If you used this: Eclair build you should download this update too: update for qvga and put androidupdate.tar from this archive on the andboot folder on your sdcard near androidinstall.tar.
After installing the system like SuperJMN said you'll have to press the power button one more after system reboot and choose update... from the menu,then quit when the menu reappear.
WIFI,Camera,Bluetooth doesn't work on this build(the only one I've tested with this new method)
Thank you SuperJMN for posting this,I hope it will remain for a long time on the front page and many thanks to DZO,VILORD,JAMEZELLE,PLEMEN and all other guys for the hard work.

Polaris
Hi,
for polaris you push power button, and boot menu works(NAND and SD).
The issue is that Wifi is not working now.
I try several builds.
So it seems not depending on the system?
Regards

How to put device in bootloader
Solved it. I put my device in bootloader by pressing the camera button + stylus reset when Android loads. I don't know if it worked because I removed my SD card and on the screen appeared "Waiting for SD card" but in that moment I've reset the device in bootloader.

[APP]-FD DroidBoot-Autostart Android!

DroidBoot
This is a small app I made to start Android / Linux at Windows Mobile boot.
Thanks to JMZtaylor and yozgatg for their dual-boots, I just got tired of clicking everytime I started my phone so made this.
I feel we are getting very close to a day to day usable version of Android! I already use it instead of windows mobile since about 6 days ago.
The .cab file installs the app to Program Files/DroidBoot. It also creates a reg entry to autostart the app which launches ClrCad.exe and HaRET.exe at boot if found. If HaRET.exe does not exist on Storage Card/ or in Storage Card/Android the app will exit and Windows Mobile will start as normal.
If you want to use WinMobile. Eject SD card before boot.
WARNING!! May cause Windows Mobile to become inaccessible if installed on a phone with only internal storage!
DroidBoot: http://www.mediafire.com/download.php?mfxl729wer606z4
Mirror: http://www.zshare.net/download/786020585d402b1f/
Android on HD2 Thread: http://forum.xda-developers.com/showthread.php?t=719646
If it doesnt start and you get an error. you may need the .Net compact framework 3.5
http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
Enjoy!!
GavTheStoner aka -=FD=-
Please dont just post "It doesnt work!" what doesnt work? Do you get an error? Help me to help you!
This app may not work on non-WWE roms.

I would love to try this but the download doesn't start.. is there any other download location?
EDIT:
Download works now, app works great thanks

does not work. pkease post a working link.the file downloads bit the file dont work.ty cant wait for final android release....

Download link works fine for me.
​

lonewolf1972 said:
does not work. pkease post a working link.the file downloads bit the file dont work.ty cant wait for final android release....
Click to expand...
Click to collapse
Did you try installing the .net framework?
Did you get an error message?

doesn't work for downloaded the framework still doesn't work

The download link doesnt work
can you upload it again?

Reuploaded on zshare.
To the people who say it doesnt work. Can you check in a registry editor if the value got added to init.
You are looking for:
Hkey_Local_Machine/init
And there should be a string value in there which says "Launch72" "Program Files/DroidBoot/Droidboot.exe" if its not there. That could be the problem.
Another idea is that it might not work on non WWE roms. Due to the storage card and or program files being named differently.

Why don't you just use the Energy ROM "Desire v5" from NRGZ its maybe way better than using an application, opinion

white-energy said:
Why don't you just use the Energy ROM "Desire v5" from NRGZ its maybe way better than using an application, opinion
Click to expand...
Click to collapse
Because I made this before he made the ROM!

GavTheStoner said:
Reuploaded on zshare.
Another idea is that it might not work on non WWE roms. Due to the storage card and or program files being named differently.
Click to expand...
Click to collapse
Then you should hardcode the file to that location and not use %programfiles% for installation of those files in the cab. The language of the rom doesn't mather anymore then.

Thanks for the idea, will implement it asap!
Edit: Part of my code in the app refers to /Storage Card/, when its trying to find haret. Any ideas to get around that?

Gav check http:--msdn.microsoft.com-en-us-library-aa446567.aspx#spfiles_topic_05 for your Storage Card location solution. Replace "-" with "/"

does this works for touch pro 2

??
GavTheStoner said:
DroidBoot
This is a small app I made to start Android / Linux at Windows Mobile boot.
Thanks to JMZtaylor and yozgatg for their dual-boots, I just got tired of clicking everytime I started my phone so made this.
I feel we are getting very close to a day to day usable version of Android! I already use it instead of windows mobile since about 6 days ago.
The .cab file installs the app to Program Files/DroidBoot. It also creates a reg entry to autostart the app which launches ClrCad.exe and HaRET.exe at boot if found. If HaRET.exe does not exist on Storage Card/ or in Storage Card/Android the app will exit and Windows Mobile will start as normal.
If you want to use WinMobile. Eject SD card before boot.
WARNING!! May cause Windows Mobile to become inaccessible if installed on a phone with only internal storage!
DroidBoot: http://www.mediafire.com/download.php?mfxl729wer606z4
Mirror: http://www.zshare.net/download/786020585d402b1f/
Android on HD2 Thread: http://forum.xda-developers.com/showthread.php?t=719646
If it doesnt start and you get an error. you may need the .Net compact framework 3.5
http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
Enjoy!!
GavTheStoner aka -=FD=-
Please dont just post "It doesnt work!" what doesnt work? Do you get an error? Help me to help you!
This app may not work on non-WWE roms.
Click to expand...
Click to collapse
What about for us users with more than one android build on our sd card?? Is there a way for this application to ask which one we would like to boot??
Good idea nonetheless!!!

Ok..
It booted once, now when I try to reboot I get a message that says I need to unzip a ROOTFS file onto my SDcard. I have never done that before. I cant get it to boot anymore. Any help?

i have the same problem. now i installed the rom from beginning and will see what happends. i tell u later.
Edit: I had to Replace the android files in SD card and put it back from where i got them " downloaded ones " now it works again.

HELP
i had already had sense android 2.1 on my hd2, i downloaded the latest zimage...or so i thought, and a patch of some sort..sorry for this im new to all of it, but when i heard android on hd2 i was very excited...how do i put a different version of android or download a different zimage file onto my hd2? i downloaded the auto boot program but when i get into android i cant make calls for sum reason it lags tremendously...it also freezes or something too i press the end key to lock the device but when i unlock it blank screen. is there a more stable version of android i can download? how do i get it on my sd card once i have the auto start on? help would very much be appreciated. thank you.

It works..
Works for me mate..thumbs up to you...

works, only thing is calling...i got no sound or voice..
good work mate

How to install roms on my Hero

Sorry i am a newbie and have been looking everywhere to try to find a guide for this. I downloaded the blue echo for my htc hero and even rooted it but am not sure what else to do besides this. Any help is appreciated. thanks in advance!

Can anyone please lead me into the right direction?

How To: Load a Custom ROM on Your HTC Hero
* Posted on 08.27.09
* Android How To's, Featured, HTC Hero/G2 How To's, How To's, Video
* 272 Comments
Finally a reason to root your HTC Hero if you haven’t already! And if you have then something to do with the new found root access. Load a ROM!
Before you begin make sure you have done our How To Root Your HTC Hero in One Click! procedure.
THIS NOW WORKS ON THE SPRINT HERO AS WELL!
After you have successfully done that, you can do this procedure.
1. Download a ROM from forum.XDA-Developer.com to your computer. Or check our Downloads section and click on Android then ROMs and use the search bar at the top and type in “Hero ROMs”. *IF YOU HAVE A SPRINT HERO MAKE SURE THE ROM YOU WANT IS COMPATIBLE FOR THE SPRINT HERO!
2. Plug in your phone and pull down the Notification bar when the SD notification pops up.
3. Click on the notification and select Mount.
4. Once the SD card is on your computer screen, copy the ROM from your computer to your SD card (make sure NOT to put it in any folders on the SD card, just on the SD card by itself).
5. Once it is done copying, rename it on your SD card to update (in windows it should just need to be renamed update and you should still see the Zip folder icon to the left of the file to indicate that it is still update.zip).
6. Unplug your phone and turn it off.
7. Turn the phone on by holding down Home and Power till you get to the custom recovery screen.
8. Select Wipe from the menu, then select Apply Update.zip
9. Once it is done, select Reboot and you are all set!
Reported Issue:
Issue: I can’t find Format Fat32+Ext2+LinuxSwap.
Solution: This means you are using Amon Ras latest recovery image, he has put this option under Partition > Partition SD > then it asks you what values you want for the different partitions. Here are the standard values, but feel free to change them according to what the ROM you wish to use recommends.
LinuxSwap – 32MBs
Ext2 – 512Mbs
Fat32 – Remainder
Click to expand...
Click to collapse
Check http://theunlockr.com/2009/08/27/how-to-load-a-custom-rom-on-your-htc-hero/ for details
Keep in mind that you need Root acces to do this. See:
http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/

Thanks a ton. It was actually down volume + power button for mine. After i got to the recovery I managed to figure it out. Thanks for the help!

Asus mypal a636n
Roes! A question would be, given that Asus MyPal A636 is a PDA and a power failure during an update since then and was not switched on only in the charging process takes fel.Szofveresen accessible somehow to delete the FAT table?

[How To] Install The New GOT Update On Milestone

Hello My Friends I've Heard You Are Having Troubler Installing The New Upgrade Or Understanding What Is Needed To Be Done.
Note: THIS IS A WINDOWS BASED HOW TO AND WILL WORK ON WINDOWS ONLY​
Before I Start I must Say, This Is a combination of process and I have not created any of those files or own the right to them so all the links are the same links found on other posts from where i got the info, so by downloading those files you are, supporting them not me i take no credit for this work
Well Here Is the quick Easy Guide In How To Do This
-Fist we Need To Get The Tools To Perform This Operation
pulled From This Tread we need
1. Motorola Drivers For Either 32 or 64 Bits
2. RSD Lite, witch is a tool for flashing your phone.
3. The GOT Open Recovery ToolUpdate: Added Latest version from G.O.T.'S Blog
4.The Firmware Files From Got
2.2.1 FIRMWARE FILES
DACH – GERMANY
http://www.multiupload.com/G9PP7JN78C
DACH AUSTRIA
http://www.multiupload.com/P8DDXCWW03
RETAIL EUROPE (RTEU)
http://www.multiupload.com/6X7H39HGCG
FRANCE RETAIL
http://www.multiupload.com/PK28LXE4SE
ITALY WIND
http://www.multiupload.com/3KYMZNRZW2
UK RETAIL (RTUK)
http://www.multiupload.com/60B78PRKNY
TELUS CANADA
http://www.multiupload.com/5S2CYGP3VW
Click to expand...
Click to collapse
EDIT: G.O.T. Has Added the burnerable open recovery to these sfb files so no need to flash it latter
-Now That We Have The Stuff We Need We are going to do it, fist i must say that unlike other roms that are applied by a backup restore (corect me if im whrong) this is a full flash and its going to reset everything so no apps will remain no setting will remain and is highly recommended that you uninstall every app you have, don't back them up(except for apps some apps that have a create backup file, those seem to work) just uninstall them, and when we are done have them installed again, Here Is A Tool That Will Help You Get There Faster
1.ok you have everything uninstalled right? now time for some action
2.install the proper divers (32 or 64)
3.install the RSD Lite tool
4.unzip the 2.2.1 FIRMWARE FILES you downloaded and you will find a ".sbf" file
5.now connect your phone to USB cable and turn it off
6.boot it in boot-loader mode (press the D-PAD UP key while pressing the power button), some night need you to release the button after a minute, a black screen will be shown on your phone and you will see the divers being installed on your computer.
7.when drivers are done open the RSD Lite tool and your device should appear you can click on it to see details.
8.now click on the "..." buttons that are close to the start button and look for the ".sbf" file, after a couple of seconds it should be ready to start
9.press the start button and do not unplug the cable or let your computer show the screen saver or go to sleep, the posses must not be stopped while it has started .
10.when the posses is done the devise will restart and voala, you have 2.2
-As GOT stands there are some bugs on the firmware and they have developed a fix to them and get root and overclock, here is what you have to do.
1. unzip the got open recovery tool into the root of your SD card
2.check this quote
NOTE: On some devices, we have encountered that rooting directly after flashing without rebooting after the initial flash can bring some issues with RootExplorer not asking for root permissions. To be safe, reboot after flash so that the “welcome to milestone” menu comes up, set up the device in general, then reboot to recovery and root the device as well as apply our 2.2.1 tweaks with Launcher, Services.jar fix and Wireless Tethering app.
Click to expand...
Click to collapse
this means if the fist time your milestone got restarted and you saw "Welcome to Milestone" Message You are good an you can root.
but if you didn't then restart you phone and see if the message comes out, if not , a factory reset should have that scree message shown.
3. open the open recovery by pressing camera and power button at the same time while the device id off. you should see a scree with a "!" symbol on it then press fist volume rocker up button a leave it pressed then press camera button, some letter will pop out.
4. using the pad scroll down to "apply update.zip", after a couple of seconds the GOT menu should pop out (everything from now on uses the pad)
5.root your phone (why not)
6.go down to "Launch 2.2.1 Menu" Option.
7.Here you will see the "Fix Bugs They Are Talking About
One of the first things you should do is use the “Fix 2.2.1 bugs” selection in the new OR 2.2.1 menu after you flash the sbf file.
This tweak will fix some of the issues with the generic sbf build such as dual USB notifications, replacing some stock Motorola applications such as the old launcher/mediagallery and adding the Wireless Tethering application.
Click to expand...
Click to collapse
8. there is the overclock too.
Now your device should have all the things you need to start playing with it,I encourage you to check on some tweaks the GOT team might have, and you might want.
I Hope This Was Helpful enjoy ^_^
To Do For This thread:
Code:
1. Make It More Easy To Use, and clear to read
2. Add Suggestions
3. Add screenshots
4. Add Other OS Options
5. Add Attachments (For Some reason I Can't Now)
Please Post And Rate If This Was Useful

Bug Counter:
Common Problems Found On Thread
http://forum.xda-developers.com/showthread.php?t=810726
1. AppBrain Market Sync Not Connecting To server.
2. Google Chrome To Phone Not Working.
3. WiFi Having Trouble To Connect On Some Routers, Sometimes Not Connecting At All on WPA2
4. Activating The Camera From The The Albums Will "Force Close"
5. Facebook Sync Is Not Working
6. The menu button on the keyboard activates the voice recognition option, and cannot be used to trigger shortcuts anymore (To me its more like a change on the way the keyboard works instead of a bug since you can use the menu button on the screen to trigger keyboard shortcuts)
7. No Vibration On key press
8. Russian Language Will Have Problems with phone and contacts apps
9. problem with android id
If Any Of Those Work On Yours Please Report Witch version you installed maybe yours can help fix others,you think you found a bug and its not listed? post it here and post
Fixing Problems:
1. Problem with android ID:
A. If Not Installed The Update Yet(Needs Root)
-Install This AppAndroidID
-Back your android ID up, and put ir somewhere safe
-follow the guide to update to froyo
-Install This App againAndroidID
-restore your android id
B. If Already did it(Needs Root)
-install this appAndroidID
-invent a number that might serve as your android ID (you need numbers and letters)
-input it on the app

okay nice tut, butttttt... im stuck at the part where i should install openrecovery. at first, to come to the "!" screen, camera screen + power did not work. i got there by pressing X + Power... but now i dont know how to access the menu where i should install update.zip..
please help!

November91 said:
okay nice tut, butttttt... im stuck at the part where i should install openrecovery. at first, to come to the "!" screen, camera screen + power did not work. i got there by pressing X + Power... but now i dont know how to access the menu where i should install update.zip..
please help!
Click to expand...
Click to collapse
okay i got it, im so sorry, i used the up button on the dpad

Also I did not see a launch 2.2.1 menu option. But I have currently launched the GOT open recov without an issue. I have rooted as well as many other things but didn't see that specific menu.

FoTwoZero said:
Also I did not see a launch 2.2.1 menu option. But I have currently launched the GOT open recov without an issue. I have rooted as well as many other things but didn't see that specific menu.
Click to expand...
Click to collapse
Silly question are you suing the newest version?
if you press down should on the open recovery menu it should be your sixth option, I have recorded a video about it this morning but its backwards I'm Going To Try And Have it Fixed and up today hopefully

For Tmobile USA ?
Which SBF for a german Mlestone on TMobile USA ? Will telus do fine ?

gbzygil said:
Which SBF for a german Mlestone on TMobile USA ? Will telus do fine ?
Click to expand...
Click to collapse
your Should use the rom depending on which band your phone has
German milestone should work with Europe ROM
under setting about phone check the Build Number
and look for that same number in here
http://and-developers.com/sbf:milestone
it will give us an idea where the phone is actually from

hi there. i have instaled europe GOT_RTEU_2_2_1FULL.zip version and now sometimes my touchscreen does not work. i mean that if i put the phone in standby and i try to unlock the touchscreen is not responding. i have to power off/on to make it work again. thanks in advance

Facebook app wont Synch with my contacts on first launch of FB app.
No other bugs so far...

Israel milestons should use retail europe?
Sent from my Milestone using XDA App

protozeloz said:
2. Google Chrome To Phone Not Working.
Click to expand...
Click to collapse
for me it's working perfectly. RTEU

Thank for this tutorial.
My milestone works fine so far, but 3g mobile hotspot and wireless tether not working.
Flash on milestone is so cool

something i don't get
I updated the firmware with RSD Lite, and used the one click tool, because:
whenever i try to hit update.zip i will get an errormessage, stating that these blocks couldn't be found -> ergo, the card not be mounted.
The HTC stuff i always managed, but this one is a mistery to me. Also, i did format fat32, pushed the stuff and then straight on bootup trying to hit the update.zip, without success.
I've read about how other people solved that problem, none of those approaches helped me.
Any hint is more than welcome.
2 bugs i've discovered so far: Battery drain like almost to be declared useless, some market apps "vanish" after installing them. I suppose those fixes would have done the job. I might attempt to use root explorer and execute the scripts like that, still I'd like to know why I'm unable to get the update.zip, resp. the G.O.T or any other "intelligent" boot menu installed.
Edit2: Even when installing the vulnerable sbf, i still get the error: E: Can't mount /dev/block/mmcblk0p1 ....

plvt_florian said:
hi there. i have instaled europe GOT_RTEU_2_2_1FULL.zip version and now sometimes my touchscreen does not work. i mean that if i put the phone in standby and i try to unlock the touchscreen is not responding. i have to power off/on to make it work again. thanks in advance
Click to expand...
Click to collapse
This could be for any reason try this
-Re download and re flash the files(do the whole thing again)
-there is an app i have called sd dual mount that makes my screen go crazy wen i connect the phone to an usb port, it was stable on 2.1 but now goes crazy on 2.2 check some of your apps to ensure they are not the ones responsible for this
hanslast said:
Facebook app wont Synch with my contacts on first launch of FB app.
No other bugs so far...
Click to expand...
Click to collapse
yurasts said:
Israel milestons should use retail europe?
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
you can try with the retail Europe,
evolucja said:
for me it's working perfectly. RTEU
Click to expand...
Click to collapse
can you tell me if you have an android ID? it should work when your device has it
czescdziadek said:
Thank for this tutorial.
My milestone works fine so far, but 3g mobile hotspot and wireless tether not working.
Flash on milestone is so cool
Click to expand...
Click to collapse
you can try and uninstall the wireless teeter app an have it reinstalled that should sort it out
MenoDev said:
I updated the firmware with RSD Lite, and used the one click tool, because:
whenever i try to hit update.zip i will get an errormessage, stating that these blocks couldn't be found -> ergo, the card not be mounted.
The HTC stuff i always managed, but this one is a mistery to me. Also, i did format fat32, pushed the stuff and then straight on bootup trying to hit the update.zip, without success.
I've read about how other people solved that problem, none of those approaches helped me.
Any hint is more than welcome.
2 bugs i've discovered so far: Battery drain like almost to be declared useless, some market apps "vanish" after installing them. I suppose those fixes would have done the job. I might attempt to use root explorer and execute the scripts like that, still I'd like to know why I'm unable to get the update.zip, resp. the G.O.T or any other "intelligent" boot menu installed.
Edit2: Even when installing the vulnerable sbf, i still get the error: E: Can't mount /dev/block/mmcblk0p1 ....
Click to expand...
Click to collapse
have you tried re downloading the files and doing all over again?, it could be a broken file
thats why i tell devs and chefs they should add an MD5 sum to their files larger than 20MB some errors are caused by just having downloaded broken files

Root phone from the GOT OR menu doesn't seem to actually root my phone (2.2.1 UK version)
Superuser whitelist app FCs instead of prompting to allow access. Have tried using Better Terminal for root access & also Wireless Tether app.
Anyone else getting this? Any ideas? Do any of the 1-click root apps still work with this build of Froyo? Which can we use?

aboycalledsu said:
Root phone from the GOT OR menu doesn't seem to actually root my phone (2.2.1 UK version)
Superuser whitelist app FCs instead of prompting to allow access. Have tried using Better Terminal for root access & also Wireless Tether app.
Anyone else getting this? Any ideas? Do any of the 1-click root apps still work with this build of Froyo? Which can we use?
Click to expand...
Click to collapse
i can confirm this. Simply trying it a second time worked for me

I'd like to add something for Linux users:
Using a virtual machine (virtualizing WinXP) that has USB support (eg Oracle VM VirtuaBox, since VirtualBox OSE does not support USB forwarding) can do this pretty easy. So no worries when trying this via a VM.

i try to instal GOT and its succesfull.
but why i install the application not bring to SD card
but still bring to internal memory
many said 2.2 automatic have app2sd
can you help me?
THX

m0jo said:
i can confirm this. Simply trying it a second time worked for me
Click to expand...
Click to collapse
not for me unfortunately!
weird...