[RECOVERY AND UPDATE] how to recover your SGS gt-i9000 Famous Black screen of death. - Android Software/Hacking General [Developers Only]

This is all thanks to the awesome threads on this website.. No credit of programming will be claimed by me.
*warning* this can be done only if you have a device that forces the samsung galaxy s g or gt i9000 to go in to download mode.
Ok so here is the story, when the samsung galaxy S froyo beta was out I kind of editted the regedit of samsung to be able to install it...
What I didn't know and wasn't noticed by anyone as I've surfed down google to the 200th pages... was that after the reg edit update the Volume down + home button + off switch combination falls of and will not work anymore.
So I waited untill it was out officially in the Netherlands (eindhoven)
What I did was the folowing:
I went to vodafone and they tried to update it. with the force device (big blue box with 12 buttons on it with the buttons 2 and 6 were clicked down).
When they tried to update the phone went off and it lost it's complete firmware. aka PHONE - ! - COMPUTER.. I went home and searched of the web and found here that there was a kind off update.zip. (when I find it I will edit this post and upload it) I downloaded the file and extracted the contents on a SD card. I went back to vodafone and let them force the phone in to download mode again. after that odin instantly recognized and updated the phone to Android 2.2 Froyo update for Galaxy S.
So here are the simple steps.
1. Don't panic.
2. Surf this forum for the update.zip if I still haven't uploaded it. and mainly search for the tag: black screen of death. or phone + ! + computer.
When you have the file. follow step 3.
3. Extract the contents of the update.zip file to the removable SD card of your phone with another device note like root:Sd/update/(files) but like root:sd/(files) the files must be directly available to the phone without having to be searching in to another folder. and plug the sd-card back in the phone.
4. If you have such blue device to force in to download mode then just use odin and update phone. if not, then go to the nearest and trustworthy phone store and make them force it into the download mode... and follow the rest of the steps.
5. step 5 is the most attention worthy part there is: Either bring your own laptop with the correct odin and the correct files and USB cable for when it's in download mode to update it. or either give it to the person behind the counter and let him update it.
6. When froyo is installed give it time to run and scan all it needs to do, otherwise it will lagg and only frustrate you.
7. after couple of minutes froyo is ready for use. after this.look for a reliable lagg fixer because froyo laggs the same way the mind of your mother-in-law does when you're trying to talk sense in to her mind...
If I'm correct after these steps you should be able to use your phone again and have froyo installed and working.
If this hasn't worked, then I advice to either repeat these steps (hence the bring your own laptop) or let the phone-store guy do his thing and force the install. REMEMBER these people usually give up after 1 or 2 try's but it's your phone and they don't care.. so just stand firm and say, I would like you to give it another try..and if he refuses. you can just tell him you won't leave untill he has done it over and over untill it's done or let you self try it and crawl behind the counter.
ALL CREDITS GO TO THE PEOPLE THAT HAVE WRITTEN THE PROGRAMS AND GIVEN ME THE OPPORTUNITY TO COMBINE THE STEPS AND FIX THIS.
But hey if you think the credits belong to me since I wrote this guide. then by all means

I can't access the recovery mode, but I can access the download mode. I also used the Kies registry hack to upgrade to 2.2.
Which update.zip file you are talking about? There are a million different ones!
I do not have an external SD card. Is it still possible to fix the phone? No offense but your solution doesn't really offer a solution at all. It only tells us to go somewhere else to get it fixed!
What is the correct Odin, what are the correct files? PIT, PDA, PHONE, CSC, update.zip? Links?

Related

Un-Do Root URGANT!!!

Now, Idk what the heck is wrong with my G1, but it is doing it. -_-
Ok, heres the WHOLE story so sit back and relax...
When I dound this app on atrackdog advertisment it said you could tether your G1 so you could give internet to like your computer or any other wireless picking devices. Now I thought "Hey, why don't I do this?" and so I did. When I launched the program, it said I needed a Root G1. Now, I tryed doing something with my Ipod once and I bricked it. Had to send it back to Apple and got a new one. Anyway, back to the story. I went to the XDA forums thingy were it showed you How To get root on a G1. So guess what I did? You know! lol I tryed to root my G1. Now I got threw ALL the steps were it said "You know have a rooted G1" and I was like YAY, but it ended up not working. I tryed 2 tethering apps that both said I still didnt have a rooted G1. Now that made me p.o'ed. So I try to fix it by downloading updates, renaming them update.zip and etc... ALL OF THEM did not work! I mean come on! The files were RC33 updates I found on the web. I talked to a guy on T-MObile Forums (a MOD named Chris) and he tryed to help me. He went on vacation for the weekend so I will try to fix it myself by asking you guys Back to the story, he told me (chris) that I need towait for a automaticly update during the day. Well I waited and got one. Everytime I try to update it it does the normal rutine. Resets, goes to the box unpacking software to the G1, swirly line, starts to load, and poof! I get a screen that has a tringle with a explimation mark in it. I ushally pressed the alt-l to see the list, aand then pressed alt-s to download from sd. Didnt work (probily becouse it is not coming from the sdcard, but from online ) so I reset phone. Chris (the mod) told me to wait on the screen becouse it might be just loading on there for the update. Well I waited for 3 hours and it stayed on the ! mark! So now I am stuck with a G1 that says it is and isnt rooted (maybe bricked, hope not becouse it still works...) and I REALLY need help!!!
Now I have restarted (meaning master reset) the thing 3 times already! I will do it again ONLY IF this is the only way it will work.
Please Help ASAP!
Yikes. Wall of text FTL. You should have sat down and distilled your entire narrative into a few cohesive sentences. It makes it easier for folks to help you if they can understand what yer sayin'.
Josh27 said:
(probily becouse it is not coming from the sdcard, but from online )
Click to expand...
Click to collapse
You can just put a standard update.zip onto the sdcard (use an external card reader) and Alt-S as normal. If for some reason you can't get the update.zip to work (for example if you already replaced the keys with testkeys) then the absolute end-all-complete-start-from-scratch is to use the DREAIMG.NBH file. Follow steps 1 through 6 in "Preparing to get root" at this thread. After that, you can apply official updates normally.
I suggest you not attempt to root your phone after you recover it.
you need to revert back to RC29, follow the instructions in this thread.
http://forum.xda-developers.com/showthread.php?t=442480
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAMIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry bootloader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
then you can up date to RC30 then to RC33 manually or just wait for the
phone to get the updates on its own.
* Note *
If you do not know how, or why..... DO NOT PROCEED...
CBowley said:
* Note *
If you do not know how, or why..... DO NOT PROCEED...
Click to expand...
Click to collapse
perfect sense!
untermensch said:
you need to revert back to RC29, follow the instructions in this thread.
http://forum.xda-developers.com/showthread.php?t=442480
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAMIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry bootloader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
then you can up date to RC30 then to RC33 manually or just wait for the
phone to get the updates on its own.
Click to expand...
Click to collapse
is DREAIMG.NBH file NOT ---> DREAMIMG.nbh
I can not count how many times that file has been called dreamimg.nbh lol
May i ask a question about updating after returning to original firmware. Since we can only revert back to original UK version firmware and i got my phone in aussie, would i get back my stg firmware after updating to the newest firmware?

Samsung Mesmerize?

So I saw today that US Cellular is getting the SCH-i500 as well, though they're calling it the Mesmerize. If I'm not mistaken, the hardware should be identical to the Fascinate, and I'm guessing it has a full "Google experience" ROM. Anybody think there's a chance of porting its ROM to the Fascinate? Of course, it might have ifs own bloatware to remove, but I can't help but think it wouldn't be nearly as bad as Verizon's version.
Anyone have any thoughts about this? Would this be a worthwhile effort for the short term, or would it be a waste of time, and we should focus on Froyo instead?
Sent from my SCH-I500 using XDA App
That'd be a great thing to try if it's possible. I'd be willing to try it out.
ivorycruncher said:
So I saw today that US Cellular is getting the SCH-i500 as well, though they're calling it the Mesmerize. If I'm not mistaken, the hardware should be identical to the Fascinate, and I'm guessing it has a full "Google experience" ROM. Anybody think there's a chance of porting its ROM to the Fascinate? Of course, it might have ifs own bloatware to remove, but I can't help but think it wouldn't be nearly as bad as Verizon's version.
Anyone have any thoughts about this? Would this be a worthwhile effort for the short term, or would it be a waste of time, and we should focus on Froyo instead?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
it is also said to be launching with froyo...
bdube said:
it is also said to be launching with froyo...
Click to expand...
Click to collapse
Well, if it's the same hardware and launching with froyo, I would put my money on froyo coming out for the fascinate within days of it's release, give or take (also, bing free).
*edit* So, According to BGR, several other reliable news sources and US Cellular themselves it's being shipped with 2.1. I only read one article saying it was being shipped with 2.2, so I think you are incorrect. It will also be released the 27th of this month and if the rumors are true, we should have froyo by then, so this is probably moot. SOURCE *edit*
Most articles say it will ship with 2.1 I think the 2.2 one was just a typo.
Yeah. It will not ship with froyo, it will be upgraded later on to froyo.
Sent from my SCH-I500 using XDA App
Nope, no Froyo right now. From the official press release:
The Mesmerize operates on the Android 2.1 platform with access to the 80,000 applications available on the Android Market. It includes popular Google Mobile Services including Google Search, Google Maps, Gmail, Google Talk and YouTube, and is pre-loaded with popular U.S. Cellular applications Your Navigator Deluxe, Tone Room Deluxe, My Contacts Backup and CityID. Customers can upgrade their software later this year to access Samsung’s Media Hub and migrate to the Android 2.2 platform, nicknamed “Froyo.”
Click to expand...
Click to collapse
Oh, and I wouldn't hold my breath on an October release. I'll believe if and when I say it, but the way Android upgrades keep getting delayed by Verizon, I'm thinking more mid-November-ish. But hey, I'd love to be proven wrong about that.
saps said:
Most articles say it will ship with 2.1 I think the 2.2 one was just a typo.
Click to expand...
Click to collapse
lol last time i ever read cnet
I'll be getting the Mesmerize when it launches, I already preordered it at a local store. I'll be watching developments on rooting closely. With the way US Cell upgrades phones Froyo won't come till next year, but hopefully nov/december would be acceptable.
cloudstrife7 said:
I'll be getting the Mesmerize when it launches, I already preordered it at a local store. I'll be watching developments on rooting closely. With the way US Cell upgrades phones Froyo won't come till next year, but hopefully nov/december would be acceptable.
Click to expand...
Click to collapse
How did you pre-order it? My friend went to all of the US Cellular stores in town, Corporate and authorized retailers, and none said they are able to pre-order.
thematrixkid17 said:
How did you pre-order it? My friend went to all of the US Cellular stores in town, Corporate and authorized retailers, and none said they are able to pre-order.
Click to expand...
Click to collapse
I went to an unauthorized retailer and they put my name on a list for it, no money down. They said they will call me when I can buy it, however as long as they receive their shipment for the 27th, I'll be waiting outside the door when they open at 10AM.
Have we confirmed it will be a Google Experience phone? I didn't see anything about that in the press release.
eleazar123 said:
Have we confirmed it will be a Google Experience phone? I didn't see anything about that in the press release.
Click to expand...
Click to collapse
Well, the press release specifically lists most, if not all of the "Google Experience" apps individually, so as far as I'm concerned that qualifies. There doesn't seem to be a clear definition as to what a Google Experience device is. Some thought originally that it meant phones with stock Android and no custom UIs, but that was disproven ages ago. I think every Android phone is considered a Google Experience phone, unless specific key Google apps have been replaced, which Verizon and AT&T have done with Bing and Yahoo, respectively.
Sent from my SCH-I500 using XDA App
I want to put this out there right now, so that people will see it.
If you flash the full firmware file that's leaded for the Mesmerize, or the modem.bin file, you will brick your Fascinate.
Do not randomly flash other hardware's firmware to your device. Don't do it.
If you really, really, really want to do it because you're stupid, or naive, or feel like making a trip to the VZW store, at least post here first and ask if anyone else has done what you're going to do. More than likely we have, and it didn't work out very well.
namebrandon said:
I want to put this out there right now, so that people will see it.
If you flash the full firmware file that's leaded for the Mesmerize, or the modem.bin file, you will brick your Fascinate.
Do not randomly flash other hardware's firmware to your device. Don't do it.
If you really, really, really want to do it because you're stupid, or naive, or feel like making a trip to the VZW store, at least post here first and ask if anyone else has done what you're going to do. More than likely we have, and it didn't work out very well.
Click to expand...
Click to collapse
Um, okay, where did that come from? I didn't see anyone here suggesting that anyone should do that. What I suggested was a port of the ROM, meaning the taking the full "Google Experience" portion of that ROM and adapting it to the Fascinate. Oh well, it's a moot point now. Froyo ROMs are right around the corner, so nobody's going to waste any time on a 2.1 ROM anymore.
Sent from my SCH-I500 using XDA App
I want to flash the HTC radio.
destroyerbmx said:
I want to flash the HTC radio.
Click to expand...
Click to collapse
I'mma slap you..
How to Fascinate your Mesmerize
****THIS POST IS NOT FOR BEGINNERS*****READ COMPLETELY BEFORE PROCEEDING*********************************************************************
I had to do this because I had flashed wrong thing in ODIN, and I had NO other choice....I did not do this by choice but this REALLY WORKS and I THINK ITS GREAT I was taking a RISK and I understood the consequences....I Could have ended up with a BRICKED PHONE, but that was not to be. I am VERY VERY happy with the results.
I WANT TO SAY THAT ALOT OF THE MATERIAL IN THIS POST WAS USED FROM LINKS AND POSTS FROM XDA WEBSITE THEY ARE A GREAT FORUM AND ANYONE DOING THIS SHOULD BECOME A MEMBER OF "XDA" AND "MOD A DROID"....THANK YOU XDA AND ALL THE DEV'S FOR ALL YOUR WORK ALL THE MATERIAL IN THIS POST I WILL PUT LINKS TO PAGES AT THE BOTTOM FROM PAGES USED "BUT I HAVE CHANGED SOME OF THE STEPS SO FOLLOW THIS POSTS INSTRUCTIONS ON HOW TO DO THIS PROCEDURE"....TO FASCINATE YOUR MESMERIZE.
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
First -You NEED to download everything and have it on your PC ready to use !!! DO NOT START WITHOUT DOING THIS.
Second -You NEED to backup your contacts. DO NOT USE MY CONTACTS BACKUP !!! You will not have that app yet so there is no way to restore them. I used an app. called LOOKOUT from the market. You have to install on phone and sign up on LOOKOUTS web sight and make sure you run a backup of contacts, as well you need to move any apps you want to your PC or SD card. I recommend the PC to leave space on SD Card....Have at least 1GB free on card to be plenty safe.
Ok heres the deal this may or may not be something you will want to do to your phone....DO THIS AT YOUR OWN RISK....This is what I did to turn my phone into a Fascinate even though I was a US Cellular Mesmerize. I WARN THIS WORKS BUT THERE ARE PROS AND CONS TO DOING THIS. To date there is NO, I REPEAT NO WAY to date to go back from this procedure to a MESMERIZE. Someone may have a way but I have not seen or found it yet. I do believe it is only a matter of time before the DEV'S come up with a restore and then you could go back to stock. SUMMARY= THERE IS NO WAY TO DATE TO REVERSE THIS PROCEDURE !!! DO AT OWN RISK !!!
First thing you need to do is download ROM MANAGER from the market and put the App on the SD Card for later install. Next Download this file here>>>>NO HYPER LINKS COPY AND PASTE IN BROWSER TO DOWNLOAD
http://dl.dropbox.com/u/458252/Fascinate Files/update.zip ---- to the ROOT of your SD Card it is a file called "UPDATE.ZIP" "DO NOT RENAME" put that on there and do not remove it you need it do a restore to access Clockwork later. This is where you need to have this located on SD. ---- /sdcard/update.zip.
Second you need to download...DI01 update with root and busybox here>>>>http://www.megaupload.com/?d=S7IFCKX0
Important:"DO NOT RENAME" and DO NOT put this on the root of your sdcard as /sdcard/update.zip. That's where clockworkmod lives. PUT IN FOLDER you name what ever on SD Card. You will need to go here later in the post to install this in step#12
/sdcard/"FOLDER YOU NAME"/update.zip.
Next thing you need the samsung drivers for windows for this to work. Those can be found on this thread: http://forum.xda-developers.com/showthread.php?t=779238 [this page has a good write up on how to down load and install.] or direct link BELOW>>>> Thank you DIRRK XDA member.
Download and Install Samsung Drivers to your WINDOWS PC this whole procedure was done on a WINDOWS 7 PC. WARNING: You need different drivers for mac/Linux and I do not know where to get them as I have only a WINDOWS PC.
64bit:
http://www.wikifilez.com/root files/epic4g/usb_drivers_GalaxyS_x64.zip
32bit:
http://www.wikifilez.com/root files/epic4g/SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
*************************AFTER THIS POINT THERE IS NO WAY TO GO BACK PROCEED WITH CAUTION !!! ************************************************
For this next step THANK YOU FALLINGUP SENIOR MEMBER XDA....I have altered his orig. post to give more detail for people, using ODIN please follow my post to do this !!
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
**************************GET ODIN AND ALL FILES NEEDED BEFORE PROCEEDING DOWNLOAD TO PC FOR USE*********************************************
LINKS ATTACHED TO FILES BELOW NO HYPERLINKS COPY AND PASTE TO BROWSER FOR DOWNLOAD.
Next download ODIN and run. Make sure ODIN sees your phone by putting phone in DOWNLOAD MODE by pulling battery LEAVE OUT. Run ODIN. HOLD VOL DOWN AND PLUG INTO PC with cable that came with phone, a yellow rectangle with id# means ODIN sees it----once this is connected DO NOT UNPLUG UNTIL ODIN IS FINISHED. If you do you will see a PC connected to a phone by a triangle this means you prematurely unplugged and you will need to re-flash whichever step failed to flash. It is only OK to unplug once a step is finished and Odin says reset in blue, but you do not need to you can load the next file and go. But I've got steps below so if you are here you didn't read entire post. CAREFUL Now follow step 4.1
ONLY FLASH ONE OF THESE AT A TIME. START WITH THE /SYSTEM ODIN AND WORK YOUR WAY DOWN THE LIST.---You do not just flash the pit file it is used with the other files like system,kernel,and recovery. ****FILES BELOW STEPS****READ ENTIRE POST BEFORE USING ODIN AND KNOW THE RISKS*************************************
************************ONCE YOU FLASH ANYTHING YOU CAN NOT GO BACK YOU WILL BRICK YOUR PHONE**********************************************
************************ONCE YOU FLASH ANYTHING YOU CAN NOT GO BACK YOU WILL BRICK YOUR PHONE**********************************************
Steps:
1. Pull battery from device
2. Open Odin on desktop
3. Hold volume down button and plug device into computer-This will place the device into download mode
4. Verify device shows up in Odin ---This should be a yellow rectangle with id #----As well the phone will also say download mode with a yellow triangle on it
4.1: Select PIT button
4.2: Select PIT file downloaded from this post and load it into Odin. (I Never loaded the pit file when I did this in Odin and worked fine for me but from what I understand it is good practice to do so to Quote a post ---"You need to load the pit file into Odin---Missing these steps usually results in major FC hell issues." Thanks PHOENIXPATH senior member XDA
4.1: To Flash the "Stock-i500-VZW-System.tar.md5" file you,
5. Click "PDA" button in Odin ---MAKE SURE YOU ONLY USE PDA "DO NOT USE PHONE" YOU HAVE BEEN WARNED!!
6. Select "Stock-i500-VZW-System.tar.md5" from where you downloaded it
7. Click "Start" This will reboot your phone when complete. This flashes both the kernel and the recovery partition to enable you to flash update.zips signed with test keys. ---When done ODIN should say reset leave pit alone and load next file of the three needed to be flashed.(YOU MAY NEED TO UNPLUG and REDO STEPS 1-4 AGAIN)and jump/proceed to step#8 and continue on.
8. Flash "Stock-i500-VZW-Kernel.tar.md5" when done says reset move to next step.
8.1 Flash "Stock-i500-VZW-Recovery.tar.md5" when done says reset move to next step.
9. Flash "CWMrecovery.tar" ----THANK YOU JT1134 Senior member XDA
10. Replace the battery and Boot in to Recovery= HOLD VOL UP + VOL DOWN same time and PRESS POWER, all three need to be pushed to enter recovery.
11. In recovery navigate UP=vol. up/ DOWN=vol. down /ENTER=home key----You need to select "apply sdcard:UPDATE.ZIP" on ROOT of SD Card to enter the next recovery screen.
12.In this recovery "CLOCKWORK RECOVERY" navigation is different UP/DOWN=SAME but ENTER=power key---you need to navigate to the "ADVANCED" and then apply "WIPE DALVIK CACHE" when done select "REBOOT RECOVERY" (brings you to stock recovery) navigate to "WIPE DATA/FACTORY RESET" once done go to "APPLY SDCARD UPDATE.ZIP" then "INSTALL ZIP FROM SD CARD" once there select "CHOOSE ZIP FROM SD CARD" navigate to the folder "YOU GAVE A NAME TO" and inside is the 2nd "UPDATE.ZIP" you put there and select it...wait until it is finnished...once done.."GO BACK"and"GO BACK AGAIN" then select "REBOOT SYSTEM NOW"
13. Enjoy your stock Fascinate phone with DI01 update and root and busybox . You still will have phone call ability but a couple of apps like contacts backup and vcast are "Verizon" and we at US Cellular can not use. But once you install custom ROMS in Rom Manager you will be able to get roms with them removed or get apps to shut down/freeze them and sub. them out.
Alot of the ROMS have apps taken from the MESMERIZE so this is not really an issue at least not to me.
INSTALL ROM MANAGER FROM SD CARD OR LOAD TO PHONE FROM PC AND INSTALL ON PHONE......
NOW GO INTO ROM MANAGER AND "BACKUP CURRENT ROM" so any changes made from here you can get back to this point.....once done you can NOW LOAD CUSTOM ROMS,KERNELS AND ENJOY THE HELL OUT OF YOUR "FASCINATED-MESMERIZE"
Buy the latest PRO version of ROM MANAGER and use to upgrade kernels thru clockwork or load roms in rom manager......
These are the files to put in ODIN PDA Flashing one at a time with the PIT file. ONLY USE PIT AND PDA......You have been warned again. PS-NEVER DUMP IN ODIN,and do not check anything but PDA AND PIT...there are things checked in ODIN when it loads leave them alone.
Download: "To PC for use in ODIN before you begin"
Odin: http://dl.dropbox.com/u/458252/Odin Files/Odin3 v1.3.exe -This is program to use to flash.
Odin Restore file for system: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-System.tar.md5 -----THIS IS FIRST.
Odin Restore file for kernel: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Kernel.tar.md5 -----THIS IS SECOND.
Odin Restore file for recovery: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Recovery.tar.md5 ----THIS IS THIRD.---this is just to be safe
Odin Clockwork recovery file: http://dl.dropbox.com/u/458252/CWMrecovery.tar ------THIS IS FOURTH ONE I FLASHED.
PIT file for use in Odin Restores: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-pit.pit ----THIS IS PIT TO USE "WITH" ABOVE FILES.
*************************THANK YOU TO XDA WITHOUT YOU THIS WOULD NOT BE POSSIBLE**********************************************************
LINKS REFERENCED FROM XDA's WEBSITE THANK YOU AGAIN XDA MEMBERS !!! YOU GUYS ROCK !!!
http://forum.xda-developers.com/forumdisplay.php?f=721
http://forum.xda-developers.com/showthread.php?t=782204
http://forum.xda-developers.com/showthread.php?t=790004
http://forum.xda-developers.com/showthread.php?t=790085
http://forum.xda-developers.com/showthread.php?t=779238
http://forum.xda-developers.com/showthread.php?t=789868
http://forum.xda-developers.com/showthread.php?t=788099
IF YOU LIKE THIS LEAVE ME SOME FEED BACK PLEASE.....................THANKS AND ENJOY........ANDROIDMAN
EXTRA NOTE: DO NOT TRY THIS WITH ANYTHING OTHER THAN THE SCH I-500 MESMERIZE......AS IT HAS ONLY BEEN DONE ON THAT MODEL..........
FLASHING ANY OTHER GALAXY S VARIANTS ODIN FILES WILL BRICK YOUR PHONE !!!!!!!!!
just use SuperOneClick 1.55
but you MUST install the Samsung USB drivers that Androidman78 listed for either x64 or x32 based windows.
once i did that SuperOneClick worked like a charm.
Just sayin prob worth it to go back mesmerize......
As Roms ClockworkMod and Mods and Kernels are starting to dev for the Mesmerize may want to swich if you did the Fasinated-mesmerize just an FYI all the above mentioned is located in the Fasinate forum....check this mod I made and enjoy they are here let me know what you think...Enjoy
http://forum.xda-developers.com/showthread.php?t=877892
Can change to suit likes and dislikes so I need input....

[STICKY]NEW Showcase Newbie Guide

After bdemartino wrote his AWESOME thread for the Mesmerize it seemed only fitting that the Showcase get their very own... And since his Thread was Flawless, with his permission I'm mostly copy/pasting word for word. as I am copying most of this from elijablake . . . so thanks this thread needs some editing, and I will be working on that in the future . . . . specifically the CWM / ROM manager which will not work. I could use some assistance in rewriting that part. TY!
BEST. ADVICE. EVER. #samsung-mesmerize on irc.freenode.net
<3<3<3<3<3
Also, read the Glossary for definitions and such. I was not the sharpest tool in the shed and it took me a while to find this . . .
Disclaimers
CSOUTH IS RELEASEING 2.2 UPDATE THIS WEEK (6/26). You may just want to wait for that to be released. This thread will be updated when the release occurs as how to flash recovery that you can flash roms with etc.
Keep in mind there are many variations to each step, this is what worked for me the easiest. READ ALOT BEFORE PROCEEDING WITH ANYTHING!!
There is always the disclaimer that attempting any of this can and will make your phone dysfunctional and or possibly bricked beyond repair (but most likely just dysfunctional which is a pain in the arse to deal with) if you do not follow steps completely (and of a trustworthy source such as xda - ehm and in the appropriate forum ).
Steps to get to 2.2 (EB11) on your phone:
**Please note that the links were removed by CSouth for copyright (COPY WRONG *****ES) reasons. So if you can find the files somewhere (ahem . . . ) then you can follow these steps. THIS GUIDE IS PURELY FOR EDUCATIONAL VALUE, I DO NOT ADVOCATE BREAKING COPYRIGHT LAW.
I highly recommend using Heimdall rather than Odin. Don't ask me why . . . maybe because it has a command line utility and it is cross platform. So my instructions will be for using Heimdall.
After you have the downloaded files (from wherever you might have gotten them, you bad bad person) unzip and look for the following files:
-factoryfs.rfs
-modem.bin
-recovery.bin
-zImage
1) Put your phone in download mode by powering down your device, removing the battery, connecting the USB to your computer, and holding the volume down button. It shouldn't take long. You should see a little Android with a shovel.
2) In Heimdall, if using the GUI, put all of the files in their obviously appropriate spots. Don't worry if not everything is filled, just use the files that you have. (You should be using the repartition with the .pit file, the zImage with the Kernel, the recovery, and the modem)
If using the command line utility, cd to the directory where you unzipped the files and
Code:
heimdall flash --repartition --pit atlas_v2.2.1.pit --factoryfs factoryfs.rfs --kernel zImage --modem modem.bin --recovery recovery.bin
Wait for the process to finish, your phone will reboot at the end.
3. That is all, now your phone is updated to 2.2.1. Put the battery back in and boot your new shiny toy!
DO NOT DISCONNECT USB DURING THIS PROCESS AS IT COULD BE POTENTIALLY DISASTROUS!!! DON'T EVEN TOUCH IT AS I HAVE FOUND THE USB CONNECTION TO BE A BIT FLAKY!
Also, it is ok if it takes your phone what seems like forever to boot. This happens whenever you install a new kernel, just be patient.
If you have gotten the most updated batch of files, you should have the proper recovery to begin flashing. If not, well seek help . . . You should have RED RECOVERY!
See here for more information about CWM or go on irc.
To access recovery, you can use the three finger method. (Hold down the volume up and down keys and the power button all at the same time when you're turning your phone on) Once you see the Samsung splash screen you can remove your finger from the power button, but keep holding down both volume keys.
You should then go here to check out themes and mods.
Steps For Rooting either 2.1 or 2.2.1
Basically all this means is gaining the ability to give programs/apps and yourself SuperUser access (equivalent of being admin in windows) and also the ability to flash roms via recovery, detailed below.
**NOTE: most custom roms come rooted, so if you are installing a custom rom in 2.2.1, you most likely don't have to go through these steps. Just flash to the ROM you want . . . ***
The easiest way to root is through the z4root.apk. (an application that will run right on your phone)
Download Here
After download, put z4root.apk on your SD card root directory
Then make sure in Settings->Applications that the "Unknown sources" box is checked.
If you don't have a file manager, download a free one from the market, using the file manager navigate to the z4root.apk and select to install it. Note: If you need help at this step, no offense I would suggest getting someone with more experience to help you continue on. I'm serious here
Reboot your phone
After it boots, open the z4root app and press root. At this point it is going to hang, give it 2 minutes and pull the battery. Count to 10, put it back in and turn it on. - This is normal
After your phone boots open z4root again and click root, this time it will run no problems and phone will reboot.
NOTE**IF YOU HAVE PROBLEMS WITH z4root: "give Super One Click a try. It's a package you have to download to your computer, but you get to see more of what's actually going on so you know where it's at in the process. I have only used up to version 1.5.5, and I know that version is very capable for the Showcase. It is located here."-This Information provided by phidelt82**
Once you are rooted (you will see the superuser icon in your apps, it will show apps you've given that permission to... eventually) you will need to make sure you have a file manager that can request root permissions (read/write) before you will be able to complete the next step. Search the market for "root file manager" and pick one to download and install.
I use Root Explorer
It's a few bucks, but there's hardly a day that goes by when I don't use it.. (Well worth the money)
THE ECLAIR SECTION IS REMOVED AS CSOUTH IS RELEASING UPDATE THIS WEEK (6/27)
Hehmmmm....
nice write-up!
Upgraded the Showcase to 2.2.1 build EE25 with Samsung Kies this morning. Also had no issue rooting with superoneclick.
cpflow said:
Upgraded the Showcase to 2.2.1 build EE25 with Samsung Kies this morning. Also had no issue rooting with superoneclick.
Click to expand...
Click to collapse
Kies has 2.3 out now =)
Kies Mini have 2.3.5 out now for generic cdma showcase.
Sent from my SCH-I500 using Tapatalk
*Edit*
It seem everyone forgot about the Samsung Showcase Galaxy S Generic CDMA.
I managed to Root it flash CWMR and flash TSM TW 4.0 ROM. but then try to go back to stock and lost 3G. So I returned it and get a new one. No more mods for me I'm done no one cares about Generic CDMA.
Can someone provide directions to install a custom rom for a Showcase running stock 2.3.4? I don't have root. I'd really appreciate any help!

Fixing LG vortex bootloops

I recently had a problem on my LG vortex. I had rooted and deleted some bloatware, then because I was upgrading phones, I thought I might sell my vortex for cash. So I did a factory reset. Much to my dismay I shortly found out that I had accidentally deleted the home screen from the phones factory memory leaving me in a boot loop. even a hard reset using default recovery wasn't working. After a day or so of research I found a couple of guides:
LG vortex downgrade guide - many thanks to Salem, as much of my guide is copied from his
http://forum.xda-developers.com/showthread.php?t=883314
after a bit of tweaking I was able to recover the phone by following these steps:
Disclaimer: I am not responsible for *any* loss or damage (including bricking) to your device -- use this guide at your own risk!
[Setting up your computer]
if you previously downgraded your LG vortex from 2.2.1 to 2.2 chances are good this part is already done
1. download files from following links:
factory flashing software & firmware
optional free un-rar software
2. plug in your phone (even in it's crippled state) it should autorun, and install some USB drivers
3. extract LGNPST.rar and run the LGNPST_General_v1.2_Lab_Version.msi this will setup to the directory C:\LG Electronics
4. copy/move LGNPST.exe to C:\LG Electronics
5. extract the LGNPST_Components rar file, this will make a directory with two MSI files in it - run these.
6. Go to C:/LG Electronics/LGNPST/ and create a folder called “Model”. Inside that folder, create another folder called “LGVS660″.
7. Extract LGVS660.rar. Inside this, you’ll find a VRZ folder. There are three files inside this: a .tot file, a .scr file, and a .dll file. Move these all into C:/LG Electronics/LGNPST/Model/LGVS660/ (the folder you just made.
8. If you’re on Windows XP, hit start, click on “Run”, and run this:
regsvr32 "C:\LG Electronics\LGNPST\Model\LGVS660\VS660.dll"
If you’re on Windows Vistas or 7, hit start, type cmd.exe, right click on cmd.exe when it comes up in the search area, and run it as an administrator. Type in the following and hit enter:
regsvr32 "C:\LG Electronics\LGNPST\Model\LGVS660\VS660.dll"
[setup complete] your computer should now be ready to fix your phone
Contrary to popular opinion on the many forums I perused researching this, I found that this software does *NOT* require your phone to be in debugging mode! it will see your phone if you simply plug it in at this point
[Flashing the phone]
1. go to C:\LG Electronics
2. run lgnpst.exe
3. if you haven't already boot phone and connect USB if the phone was already connected disconnect and reconnect it to make sure the software recognizes it.
Warning! do not disconnect your phone from the cable under ANY circumstances until the software tells you it's safe to do so!
4. try to directly flash phone back to factory. This will require you to select the .tot file from above under where the program is expecting a .bin file (you'll have to manually type in a filter in your file selection box) also select the .scr file in that same directory.
5. if that doesn't work go to the Data menu
6. select 'data recovery'
7. let that work it's magic and it should transfer to 'emergency mode'
8. select the .tot file and then the DLL for your phone
9. flash -- if everything works out your phone will reboot around 60% with everything on it
10. once the phone has booted completely go to menu and set phone to USB debug to stop the 'flashing' process this will allow you to safely disconnect your phone
ENJOY!!!
[emergency flashing]
*WARNING! the following methods are untested! above methods worked for my phone!*
Once again, do not disconnect the phone under ANY circumstances until the software tells you it's okay to do so!!
1. boot the phone in emergency mode by holding volume *up* and the back button at the same time (as I gather from the above mentioned xda post)
2. once in emergency mode it should be safe to continue from step 8. above.
[end guide]
Many thanks to those out there who helped me build this guide!! I hope it helps!! Now you should have the freedom to try removing all that bloat ware again. Hopefully, with a bit more discretion this time
In case anyone is wondering -- yes, I'm a n00b, and yes, this guide is for n00bs just like me
Advice?
Can this method be used to return a rooted/hacked/modified phone to FULL factory stock so you can return it for a warranty claim? IE- will it remove clockworkmod, superuser, and any other traces that you messed with the phone? Also, is this for verizon?
I had a lg vortex I had to return recently due to a blown speaker making my calls sound like a kazoo.
I DID root it (using gingerbreak)
I DID run some sketchy root programs like setcpu, wifikiller, root explorer, wifitether, and a few others
I originally ran ROM manager to backup my rom when I first rooted, but it said it installed clockworkmod (selected LG optimus V from the list and it worked) in order to run properly.
I have slowly uninstalled all of the software, used rom manager to restore my first backup, then uninstalled rom manager, installed gingerbreak, unrooted, uninstalled gingerbreak, uninstalled everything, then did factory reset from settings menu.
As of today the phone looks stock. No superuser. No sketchy programs, I'm just not sure if CWM or something else could have survived the factory wipe from the settings menu. I know superuser survives a factory wipe, so I'm not sure if I still have dirty files lying around. If verizon knows I rooted my phone it will cost me $309
Is that good enough? I don't want to return a device that has evidence files on it, but I have no clue if clockworkmod got uninstalled with rom manager or not. I never changed roms, I never knew how to boot into cwm, I don't know if it's still there or not. Advice?
EDIT: You should note that my phone is NOT bricked- the speaker is blown, so there should be no limit to the menus, functions, or software tweaks available which would be needed to fix my situation. Also it should be noted that I am not the type of person who condones returning a bricked phone to get another one- That hurts us all. Unbrick yourself using a thread like this or eat your mistakes.
hi, I recently rooted my phone with gingerbreak and uninstalled some bloatware from verizon. Then I couldn't see the home screen, although I can pulled down the status bar. After following your steps above and at running lgnpst.exe. I got the error message saying: Fail to load the Skin.dll. Do you have any idea? Thanks
been looking for you for three solid weeks!
dude, i've literally tried every posted forum in xda, androidforum, soul, phandroid, etc, downloaded every possible software, updates, utilities, recoveries, firms, and yada, yada, yada, and for the past three weeks i have past this one flippin' thread, over (no lie) 20 or so times. and please believe that your solution/explanation for this problem was really my last @#$#@## time i was going to EVER, and i mean EVER, download, install, re-install, re-name, re-write, place, copy/paste, throw-up, stroke, stomp-feet, and dosie-doe anything technology-based/wired-wireless eqipment in this young mans life again!!! so i thank you:victory::victory::victory::victory::victory::victory::victory::victory::victory::victory: and to ALL those not mentioned here (my apologies, but are still and forever will be in my prayers) for this and every single solution/explanations, that has ever been posted for dumb-a#$es like me. and for donating im trying to do that but recently messed up by using google's new/terrible wallet proccess. yes i know i should have used "PAY-PAL" but had already had money link to that GOD-aweful--theivery account. and for all those out there like me/us i will be posting my own thread/solution to this very same problem using my own words in a more in-depth description including all-props to you and for them not mentioned here (my apologies, but are still and forever will be in my prayers). thanks to you all and fyi im stopping here, oh no, i too, will become a master of all this hacking stuff, or i will become a master of destroying them all and then will have new problems for ya'll real hackers to nibble on.!!!

[Q] All links down, need T839UVKJ2 SK4G stock rom

so after looking for 3-4 hours i'm convinced that almost all the links for files related to the SK4G are expired/down/DL limit reached. i had to wipe my HDD and can't find my backup anywhere!?!? if anyone has the stock firmwares (any and all) could you pretty pretty please send them to me? i'm stuck in a buggy version of glorious overdose and just need my phone to work right again. respond for e-mail or just post ***NEW*** link in this thread.
P.S. so when the mods say "wrong thread" or "duplicate" i looked i searched and found nothing newer than 2013 so i started a fresh one......... that and i just signed up and it keep telling me "NO" in what seemed like the correct forum.
P.S.S i'm assuming there's legal reasons but whats up with a file repository on or at least paired with XDA to hold all the files posted here. shooting in the dark but maybe Kimdotcom will provide a mega account to serve as a repo?!?!?!?
I have the One-Click KG2 ODIN Java app that may be able to restore your SK to t839-Sidekick4G-UVKG2. Here's the README:
If you brick your phone, well you're lucky because it can't get any easier to fix. This is pretty much a one-click version of ODIN that is OPERABLE AND EXECUTABLE on ANY operating system that has Java installed. Self-explanatory, but if you don't have Java installed yet, you probably should go get it installed now.
(Credits go to Ayoteddy for the following post) :
To get into download mode (if you can't) pull the battery out of your phone, the USB cord (if connected), the SIM card, and the SDCard. Now...in a position where your one hand is able to access the Trackball and - volume key, hold them both at the same time and with your other free hand, insert the battery, after a second or two, you should see an Android on screen with a logo saying DOWNLOADING..you're ready to advance.
After you install Java, double-click the .jar file in this folder.
Hit "flash" and if all is well, it'll work without any hassles and you'll be back to the stock ROM like the day you got your Sidekick (factory reset).
If it says driver was not found, a window will popup with an administrative prompt if you are running Windows 7, allow it to run.
On the new Zadig window, go to Options>List all devices.
You should now see SAMSUNG COMPOSITE DRIVER, make sure the box to the immediate right says WinUSB and then hit the install button.
You should be on stock after performing these steps...if not and YOUR MODEM fails to upload, check "Flash Bootloaders" and the modem should flash just fine and you'll be back on stock ROM soon enough.
Thanks to AdamOutler for Heimdall!
His thread is here if you want to thank him properly!
http://forum.xda-developers.com/showthread.php?t=1350060
I also have Odin3+v1.61 with sk4g pit. Let me know if you want me to upload these.
marathonjon said:
I have the One-Click KG2 ODIN Java app that may be able to restore your SK to t839-Sidekick4G-UVKG2. Here's the README:
I also have Odin3+v1.61 with sk4g pit. Let me know if you want me to upload these.
Click to expand...
Click to collapse
Please re-upload these to sammobile.com, samsung-firmware.org, MEGA, Android File Host, or similar where the files can live on longer.
Sorry, I got rid of my SK a couple years ago and all the files that went with it.
marathonjon said:
Sorry, I got rid of my SK a couple years ago and all the files that went with it.
Click to expand...
Click to collapse
Is there anyone out there that still has this? Please re-upload.

Categories

Resources