This question is not about the TF300T but about the ME301T, quite similar but cheaper and without dock.
I had my tablet in RMA. This was changed to new hardware:
* Touchscreen
* Display
* Battery
* Mainboard
Question:
What is left of my original tablet? What was not repaired (changed) in RMA?
The back plate, there are some scratches like before RMA.
Related
The motherboard is fried on her tf101. Does anyone have a broken tf101 to sell for cheap or is it even cost effective to replace the motherboard. I've already taken apart the device and removed the motherboard and power point where the charger connects to the motherboard, just need a new one. Thank you.
If you can find a use TF, maybe one with a broken screen.
I think it's better to buy a whole new TF vs buying a motherboard which would probably cost almost the same.
I went yesterday to pick up my tablet from my retailer in the UK. The assistant in the store told me to check it which I did. There was numerous problems. Firstly, the charger was badly scuffed, the plastic casing was popping out, the screen was on an angle, the glass wasn't glued down and they managed to chip part of the plastic surrounding the screen. It looks like it was sent from DJ Henry to Asus (It's a Transformer TF300) in The Czech Republic. I showed the problem to him and he agreed that he would let me have an exchange or pick a different tablet without argument. I took the tablet home and am about to bring the box and accesories back today (including keyboard) where I will exchange it for a Samsung Galaxy Note 10.1.
I can't believe Asus didn't even resolve the issue and it came back from their repair centre in a much worse condition (almost as if they did no quality control). They also marked it as resolved
hello,
As you may knonw, my TF700T screen is not showing anything but a white screen. I want to replace the main board and checked many mainboards available on Ebay. I want to asked whether if the ebay's mainboard are fully compatible with mine or not?
MY MAINBOARD NO:
http://www.xum.ir/images/2014/06/02/22222GIv3s.jpg
EBAY'S MAINBOARD:
http://www.ebay.com/itm/Genuine-OEM...450?pt=LH_DefaultDomain_0&hash=item3f3414e9ca
I have a Samsung Galaxy Tab 2 10.1 that I got from somebody to replace the cracked screen. This is not my first screen repair but it is my first time working with these Samsung tablets. I went out and bought a new screen for it which showed up in the mail damaged, so I contacted the seller and he sent a new one which was in good condition when it arrived. I went ahead and put it on the tablet with no problems. I turned the tablet on and it didn't work. I googled the problem and then I found out that there are different revisions of this screen. The screen that i had installed onto the tablet was a rev 0.2 and the one that arrived damaged was a rev 0.3. None of the screens work including the original but I think that is due to it being broken beyond use while I was removing it.
The original screen doesn't say what revision it is. The flex cable has MCF-101-0403-V3 ISU 1238 on the cable. Would this be a rev 0.0 cable? I am assuming that it is because there is no stated revision number on it.
I have found this item on ebay - http://www.ebay.ca/itm/Samsung-Gala...ablet_eReader_Accessories&hash=item5657a7329f
The ad says that it is universal and that it will work for all versions. Is this even possible? I want to make sure that it will work because it is quite expensive.
I really need to get this tablet fixed because the owner has waited a long time and I'm still no closer to fixing it.
Any replies or help will be extremely appreciated!
canadaboy25
That is the one I used for my Galaxy Tab 2 from that same seller and it worked fine. Mine was p5113 Rev2
Did it have the pre-applied adhesive on the back side?
Replacing the LCD or the Digitiser
I have a p5113 and replacing the digitiser was fairly easy. You have to buy the parts with the tools included. I used the prying tools and a hair dryer(you may use a heat gun )to removing the digitiser. On the LCD you may have to unscrew. Be mindful to work in an area that is dust free and you are bound to have broken glass if the digitiser is being replaced. Take a look at eBay or Amazon for the replacement kits. They are pretty cheap to replace. Also take a look at YouTube videos for the replacement of the screen and digitiser.
My daughter has an original SHIELD tablet. She somehow managed to take a chunk out of the micro USB charging port. In trying to fix that, I managed to mess up the board/tablet in other ways.
My question is: Can I buy a K1 with a cracked screen, and use its guts to repair my original SHIELD tablet?
Based on the screenshots I have seen, the motherboard "looks" to be the same on the 2 tablets, but I don't want to buy a tablet on Ebay, only to find out that my plan won't work.
brock4111 said:
My daughter has an original SHIELD tablet. She somehow managed to take a chunk out of the micro USB charging port. In trying to fix that, I managed to mess up the board/tablet in other ways.
My question is: Can I buy a K1 with a cracked screen, and use its guts to repair my original SHIELD tablet?
Based on the screenshots I have seen, the motherboard "looks" to be the same on the 2 tablets, but I don't want to buy a tablet on Ebay, only to find out that my plan won't work.
Click to expand...
Click to collapse
It should but the board will be missing the sensor for the pen and unless you have the 16gb pyro you will be going to 16gb. The boards should be identical except for the pen sensor. And maybe the GPS chip