Have anyone tried to use build-in SIP client aka Internet calling? In my case it works, but without any sound. It doesn't matter if it's over WiFi or mobile network, so it's not network configuration. And yes, I've tried both UDP and TCP options. Even more, build-in SIP on Samsung on the same network, with the same SIP provider and with the same Android 4.4.2 works perfectly. Third-party clients are working also, but it's not convenient.
Any thoughts?
Hi Myxolove
I was also keen on using the internal SIP client after I purchased the phone, it did not work same problems, i am on MT7-TL09
where did you get TL10 ? it is only released TL09 on the offical webpage., i just checked.
Which Solution did you use?
I have a SIP Phone number for one free provider called sipgate and one or two SIP callout accounts with betamax, which i pay
which would be a good client for me? i really want to use internet calling again its sooooo cheap
thanks and best regards, ant0n
Yes. I also have same issue with my Huawei Ascend Mate7. I contacted my VOIP provider (peenytel) , the asked me to configure following
("Kindly go to settings on your phone and go to audio configurations and select
codec of G711Alaw or G711Ulaw and reboot your phone and make a test call.")
but I can't find this feture with my SIP seeting. I guess that it is the reason for what we are experience.
Related
Hi,
Could you please help me to find out best SIP software for HD2. I got PortSIP for my HTC HD2. It;s working very well on wifi connection. But not working at all on t-mobile UK 3g network. I get registration failed error. I just realised that PortSIP doesn't initiate the data connection at all. SO getting same message even though not connected to internet. My voip provider is actionvoip.
Any suggestions....
yes portsip does not initiate the 3G/data connection. But there is a work around. Open a web browser or any application that uses data and after connection has been established start portsip then it registers successfully.
I use Actionvoip on 3G without any problems.
diamondX04HT said:
yes portsip does not initiate the 3G/data connection. But there is a work around. Open a web browser or any application that uses data and after connection has been established start portsip then it registers successfully.
I use Actionvoip on 3G without any problems.
Click to expand...
Click to collapse
Hi,
I tried same, But no success. On which network you are.. I am on t-mobile UK and i found following link (https://www.t-mobile.co.uk/shop/terms-and-conditions/combi/) in which thay have mentioned that
<b>
"you can't use your phone as a modem or use internet Plus for peer to peer file sharing, or making internet phone calls. *[Internet] Plus comes with a fair use policy of 3GB a month."</b>
So I am wondering wheather T-mobile is blocking my access to use any SIP software. Although i can use skype mobile on t-mobile.
pda_crazy said:
Hi,
I tried same, But no success. On which network you are.. I am on t-mobile UK and i found following link (https://www.t-mobile.co.uk/shop/terms-and-conditions/combi/) in which thay have mentioned that
<b>
"you can't use your phone as a modem or use internet Plus for peer to peer file sharing, or making internet phone calls. *[Internet] Plus comes with a fair use policy of 3GB a month."</b>
So I am wondering wheather T-mobile is blocking my access to use any SIP software. Although i can use skype mobile on t-mobile.
Click to expand...
Click to collapse
I am on softbank in Japan
Skype is no SIP-software.
VoIP might also be blocked by your VoIP-provider. I use VoIP for my company and we had the problem that we could only sign in from the provider's own network. They didn't allow external connections to their VoIP-servers.
After we had some discussions on the matter we received a workaround, so we can use VoIP from anywhere in the world and customers can call us on the same number, where-ever we are
don't worry
try FRING for windows mobile.. its supported SIP .. WORK PERFECT
NIMBUZZ
Try nimbuzz messenger.
Maybe this one WVGA VoIP software with earpiece, HTC favorites import, dtmf support
Hello XDA community. I am successfully using the wm6.1 voip solution. I have one problem that I'd need to solve. I need a tool to configure wm voip service to use/have a backup SIP server or the ability to quickly switch between SIP servers.
Right now I am using 2 SIP servers:
1. Asterisk server I have at home and use only to call my home pc and my second pda. I connect to them through hamachi vpn.
2. My gsm provider SIP server. Gives me free calls to its own GSM network and cheap calls to other networks.
I am using "Sip Config Tool 2.0.1" and "Setup Voip v0.3" but updating settings like this takes me some time cos of the amount of info I have to fill in for my provider voip account.
Thanks in advance.
Hey:
Is it possible to use SIP to get calls on the Sensation(GSM unbranded) ?
On the Nexus S there is a option under Call Settings -> Internet Call settings.
Thanks
D
Same option is available in the Sensation, but it is limited to WiFi connection.
You can use Sipgate and any other VoIP provider also on 3G by downloading a SIP application. I use CSipSimple for Sipgate UK and others.
Does anyone know how to activate wi-fi calling on the Z5? I figured it'd be a menu setting, but I can't find it. I'm using the Taiwan version of the Compact and am using MetroPCS here in the States.
Thanks.
To answer my own question. It appears that wi-fi calling is only available with some carrier phones. So for instance, EE in England says on their setup page,
"WiFi Calling is only available on the EE version of the Sony Xperia Z5 Compact, bought directly from us in one of our stores, online at EE.co.uk, through our telesales team, or through corporate sales if you are a corporate customer."
So, I guess my question now is, is there a way to flash the phone so that I can get this feature on my non-EE phone? My carrier, MetroPCS, does allow wi-fi calling, but they don't sell the Z5 (and likely won't ever sell it).
You can try flashing the EE ROM with flashtool and see if you have that option. You will get carrier specific bloatware as well.
Would I be able to delete the bloatware? And I'm new to Android. When I flash, does it delete all of my settings and downloads and whatnot? I'm assuming I can back them up someplace in case it does, but like I say, I'm new to this. Also, where would I get the EE Rom from?
Look for Xperifirm. Download and install. You can get the firmware there. Next download flashtool version 0.9.19.10. You can bundle the firmware files into a ftf and flash, both with flashtool. Read the respective guides. To keep data, look at options when flashing and choose not to wipe user data. I would type it up but the instructions are on XDA, just search.
Neither WiFi calling or VoLTE will not work on the Sony Z5 unless your carrier/network offers the Sony Z5 for sale directly.
Note, WiFi Calling and VoLTE are two separate features but similar network functions on the operators side.
Note, MetroPCS is a sub-brand of the T-Mobile USA network so Metro is pretty much TMo USA.
Since T-Mobile USA does not offer the Z5 you will not be able to get WiFi calling working. In order for WiFi Calling or VoLTE to be supported the network operator must customize the ROM to include the WiFi calling and/or VoLTE network configurations. Unlike the typical SIM card and APN settings which are industry standard and can be adjusted manually. WiFi calling and VoLTE are somewhat more complex and include carrier/network specific security certificates to work. Apple can get away with supporting WiFi calling and VoLTE simply by swapping SIMs because the T-Mobile configs are loaded into their core iOS software which goes out to everyone around the world. (Probaly one of the reasons the iOS eats up so much storage...but i digress) Android runs much leaner and does not carry all the extra configs for all global networks...hence a carrier (i.e. T-Mo US) tweaked version of the Z5 ROM would be required for this all to work.
If T-Mobile USA offers the Z5 in the future you may be able to unlock the boot-loader and flash the T-Mobile specific ROM onto your phone and get WiFi Calling and VoLTE to work. But if T-Mo USA never offers the Z5 then you will never have WiFi calling supported.
Hope that helps....
WiFi calling and VoLTE are pretty much the same thing...just VoIP. And in most operators case WiFi Calling and VoLTE are the same back end network call processing systems. VoLTE is easier for the operator to secure as the customer is using the operators LTE and IP network. WiFi calling is seen on fewer operators as it requires more security since you can access the operators network from any public or private IP network.
---------- Post added at 10:28 PM ---------- Previous post was at 10:20 PM ----------
and in theory you could extract the WiFi calling stack form the EE network's Z5 ROM and load it into a custom ROM. That would give you the software capability to support WiFi calling....But you will still need the T-Mobile USA WiFi calling fqdn for the WiFi border controller and their security certificates which are typically specific to a handset model. And again since TMo does not offer the Z5 there are no Z5 certificates.
Ah, well that sucks.
Yeah I feel ya, I love WiFi calling too
Some network providers have their own apps to allow it. Like in the UK, O2 network has an app called TU go
All hope isn't lost - Android M is supposed to have a provision for wifi calling. I've read posts of people with Nexus 6's on M (google play editions, so no carrier specific models) that have been able to use wifi calling. The current loss of band 12 (hoping this will change too) as well as the loss of wifi calling as a fallback has been the only drawback to this otherwise excellent handset. I absolutely love the thing. It just works, no fuss.
I know this isn't helpful, especially for those outside of the US, but this is why I ported my number to google voice a long time ago. VOIP works great over Wifi for me most of the time and when I have LTE reception, I can still use Voip albeit with increased data consumption.
shizenyasuya said:
I know this isn't helpful, especially for those outside of the US, but this is why I ported my number to google voice a long time ago. VOIP works great over Wifi for me most of the time and when I have LTE reception, I can still use Voip albeit with increased data consumption.
Click to expand...
Click to collapse
Do you know of any guides for how this is supposed to work? I have Google Voice, and I have Hangouts, but I'm not sure how they're supposed to work in tandem for wi-fi calling. Would I be forced to actually open up the Google Voice app in order to make wi-fi calls? How is that any different from something like Talkatone?
Adrift98 said:
Do you know of any guides for how this is supposed to work? I have Google Voice, and I have Hangouts, but I'm not sure how they're supposed to work in tandem for wi-fi calling. Would I be forced to actually open up the Google Voice app in order to make wi-fi calls? How is that any different from something like Talkatone?
Click to expand...
Click to collapse
Yeah, that's a bit of a pain in the ar$3. I install google voice and hangouts on any phone/tablet I get, Google voice is necessary to route all outgoing calls through GV so that my GV number shows up on my call partner's caller ID. (even though you can dial directly from the native phone dialer) I install Hangouts to manage sms and google talk (now just google hangouts but specified to avoid... or contribute to, (as the case may be) confusion) messages. You can also dial directly from Google Hangouts (this is the only option when you're only using Wifi, without cellular signal) So my thought flow kinda goes like this.
To make a call:
1)check for cell signal, if there is signal, use the native dialer to place a call
2) if there is only WiFi, use hangouts (or hangouts dialer) to place a call
Receiving calls: (If you need help I can tell you the specific settings)
1)when the phone rings, determine if it's ringing via Hangouts or the native phone app
2) check for cellular signal and wifi signal
3) if cell signal is 2g only, only answer with the native phone app (sometimes hangouts will ring first) and I have to wait for the native phone app to realize there is a call coming in (forwarded of course to my cellular provider number from GV)
4)if connected to WiFi, or I have LTE coverage (sometimes even on 3g) pick up the hangouts ring.
Sometimes I do miss calls because I'm waiting for the native phone app to ring when I'm on 2g, but hangouts rings first and the native phone app doesn't ring, but those instances are fairly infrequent and I can just call them back.
---------- Post added at 04:51 AM ---------- Previous post was at 04:48 AM ----------
Adrift98 said:
Do you know of any guides for how this is supposed to work? I have Google Voice, and I have Hangouts, but I'm not sure how they're supposed to work in tandem for wi-fi calling. Would I be forced to actually open up the Google Voice app in order to make wi-fi calls? How is that any different from something like Talkatone?
Click to expand...
Click to collapse
Also, sorry I've never used Talkatone, so I don't know if it works any differently. You don't have to have google voice installed to make / receive wifi calls via hangouts. you just have to have opted in to hangouts on your google voice account. The ONLY reason I still install GV is to make sure that when I make outgoing calls from the native phone app, my GV number shows up on the recipient's caller ID. They should really just bake this into hangouts and completely depreciate the GV app.
You could port the t-mobile wifi calling apps from the z3. I ported wifi calling to my att g2 from the t-mobile rom. It's not really that hard if you know how to read logcats
Many retail mobiles have "Wifi Calling" function but not any menu entry to enable , The APP can check the hidden function and enable it if can use.
https://play.google.com/store/apps/details?id=com.widget7.wifi.calling
Pretty much what it says on the can. If I'm in a voice call and flip over to email, or a browser, all I get is "ERR_INTERNET_DISCONNECTED" and even apps like third party file browsers(Astro) that assume network connectivity to load ads or the like hang up because there's no data network available during voice calls. Once I end the voice call the internet connectivity comes right back and works fine to load the same sites or use the same apps that I wasn't able to use before.
This is a black Pixel 2 XL, unlocked, ordered directly through Google, with a Sprint SIM that I double-checked against the online discussions for compatibility. The device works fine in most other ways. The activation was clean and everything else seems to work.
When I'm at home and on my Wi-Fi I can use both voice and data to multitask, so this is something in how it's working with the carrier. I've tried the LTE(Preferred), 3G, and Global network types in the "Preferred Network Type" section of the "Mobile Network" options for my carrier.
I've looked through all the settings and can't see anything like "enhanced calling" which was the solution with the single-radio Samsung devices. Any ideas how to get the Pixel 2 to share the radio during voice calls?
Thanks,
Steven
I don't think Sprint has the backend to support VoIP and LTE at the same time. So that's probably just a network limitation.
Sprint has one antenna so there's.o voice and data at the same time like GSM. Sprint is CDMA been like that since 2014
smerr612 said:
Pretty much what it says on the can. If I'm in a voice call and flip over to email, or a browser, all I get is "ERR_INTERNET_DISCONNECTED" and even apps like third party file browsers(Astro) that assume network connectivity to load ads or the like hang up because there's no data network available during voice calls. Once I end the voice call the internet connectivity comes right back and works fine to load the same sites or use the same apps that I wasn't able to use before.
This is a black Pixel 2 XL, unlocked, ordered directly through Google, with a Sprint SIM that I double-checked against the online discussions for compatibility. The device works fine in most other ways. The activation was clean and everything else seems to work.
When I'm at home and on my Wi-Fi I can use both voice and data to multitask, so this is something in how it's working with the carrier. I've tried the LTE(Preferred), 3G, and Global network types in the "Preferred Network Type" section of the "Mobile Network" options for my carrier.
I've looked through all the settings and can't see anything like "enhanced calling" which was the solution with the single-radio Samsung devices. Any ideas how to get the Pixel 2 to share the radio during voice calls?
Thanks,
Steven
Click to expand...
Click to collapse
I actually have this issue on VZW! Has anyone seen this on VZW? Also, is there a setting to VoLTE? This is stock Android on a VZW Pixel.
Thanks!
-Sofie
Hello. I have a Google store bought Pixel 2. I just placed a call to my voicemail and was able to surf the web on my browser at the same time. It works both on WiFi and with WiFi switched off.
SweetSofie said:
I actually have this issue on VZW! Has anyone seen this on VZW? Also, is there a setting to VoLTE? This is stock Android on a VZW Pixel.
Thanks!
-Sofie
Click to expand...
Click to collapse
Check to see if "advanced calling" is enabled. Settings/ Network & Internet/ Mobile network/ advanced.
robocuff said:
Check to see if "advanced calling" is enabled. Settings/ Network & Internet/ Mobile network/ advanced.
Click to expand...
Click to collapse
It is on, but it also seemed to stop having the issue on it's own. I wonder if it was a carrier issue?
err_internet_disconnected
This error basically means that your browser is unable to establish internet connection to the host. The primary reason for getting this error is because your computer itself is not connected to the internet. This particular error messageerr_internet_disconnected belongs to Google Chrome and there are various reasons leading to this error, includes computer issue, or web server issue or Network setting , Internet connections, etc. It doesn't matter, you can take the appropriate solution to fix it. The following article can gives you some specific advice to solve this issue.
Try a different web browser
Check your cables
Check your WiFi connection
Check Your LAN Settings
Delete WLAN Profiles
Disable Antivirus and Firewall
Restart Your Router