Related
hello i'm trying to original firmware (the last one i can find) but i can't do it with adb or custom recovery maybe i 'm too stupid or french ^^
but if someone can make a thin tutorial , then i can send my tablet to Acer for the screen issue (not solved by the tricks of parameter)
thank a lot
@Amidamaru87,
If you already have CWM installed then it's very easy.
1- Take the original (base) firmware, not the last one. Very likely the last one is not a complete firmware but an update to the original one.
2- Take the update.zip file and unzip it to a folder.
3- Go to folder "\META-INF\com\google\android"
4- Edit the updater-script and put a # as first character of first line. This will avoid this line to execute: #assert(getprop("ro.product.name") == "a510_...");
5- Zip all files again and name it update.zip.
6- Flash it with CWM.
7- When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right?
That's all.
From this point on you are at factory state. If you connect to internet very likely Acer will send you an OTA update but it's up to you to install it.
Regards.
fast , accurate ! thanks a lot
but i have only image ...
Download from The official Acer site:
http://global-download.acer.com/Ste...0&BC=Acer&SC=&LC=en&OS=a09&FS=O02&Category=OS
Regards.
Sent from my A510 using Tapatalk 2
xdajuanmrodrigues said:
@Amidamaru7,
If you already have CWM installed then it's very easy.
1- Take the original (base) firmware, not the last one. Very likely the last one is not a complete firmware but an update to the original one.
2- Take the update.zip file and unzip it to a folder.
3- Go to folder "\META-INF\com\google\android"
4- Edit the updater-script and put a # as first character of first line. This will avoid this line to execute: #assert(getprop("ro.product.name") == "a510_...");
5- Zip all files again and name it update.zip.
6- Flash it with CWM.
7- When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right?
That's all.
From this point on you are at factory state. If you connect to internet very likely Acer will send you an OTA update but it's up to you to install it.
Regards.
Click to expand...
Click to collapse
I tried to get back to factory state , but i got an "instalation aborted" message every time that i tried
I downloaded the R28.RC02.WW.GEN1 from the site that you linked, unzipped , added "#" character to the first line at the update script file, rezipped and renamed to update.zip
I also copied the file to ext sd and internal sd
I'm currently at franken a700 with nothrills recovery
@ursur,
I would recommend:
- Unzip and zip with another application. Some times wthis could be a problem.
- Edit the script with a linux compatible editor like Notepad++, freeware, google it. Avoid Wordpad or other editors that insert line feeds of CR.
It works for me using internal or external SD.
Regards.
One Hint:
8- When CWM asked to avoid root say "NO".
Click to expand...
Click to collapse
What does it mean 'flash with cwm'?
IS it this command : fastboot flash recovery update.zip?
Sorry for stupid question.
Recovery verified failed
Hey guys,
i installed a stockrom from acer with your instructions and it was completly done. I had Nothrills 700 Franken before.
i just answerd this question : When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right? with YES because i wanted to keep cwm.
The tablet restarted normaly and when setting up acer told me that there is a update so i did the update.
Now the tablet restarted and i get the message : booting recovery kernel imag
and in the second line: Recovery verified fail...
in the middle of the screen you can see the acer logo.
WHAT CAN I DO NOW??? I can't reboot the tablet. Holding the power button get no impact. Shoud i wait till the battery is empyt and then?
I read smthg about fastboot and get a stock recovery. Is that a possibility? if yes, who will give me an instructions what i have to do.
Thx for your help.
But at the Moment i'm very desperate
P.S. Sorry for my bad english
---------- Post added at 12:53 PM ---------- Previous post was at 12:09 PM ----------
Benedikt_XVI said:
Hey guys,
i installed a stockrom from acer with your instructions and it was completly done. I had Nothrills 700 Franken before.
i just answerd this question : When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right? with YES because i wanted to keep cwm.
The tablet restarted normaly and when setting up acer told me that there is a update so i did the update.
Now the tablet restarted and i get the message : booting recovery kernel imag
and in the second line: Recovery verified fail...
in the middle of the screen you can see the acer logo.
WHAT CAN I DO NOW??? I can't reboot the tablet. Holding the power button get no impact. Shoud i wait till the battery is empyt and then?
I read smthg about fastboot and get a stock recovery. Is that a possibility? if yes, who will give me an instructions what i have to do.
Thx for your help.
But at the Moment i'm very desperate
P.S. Sorry for my bad english
Click to expand...
Click to collapse
I tried the resetbutton and now my tablet restarted normaly.
But when i do a reboot and try to get to the recovery i get the message like i described before.
Is it possible that i install now the cwm from nothrill with adb?or can i get a stock recovery and flash it with adb?
thx for your help
xdajuanmrodrigues said:
@Amidamaru87,
If you already have CWM installed then it's very easy.
1- Take the original (base) firmware, not the last one. Very likely the last one is not a complete firmware but an update to the original one.
2- Take the update.zip file and unzip it to a folder.
3- Go to folder "\META-INF\com\google\android"
4- Edit the updater-script and put a # as first character of first line. This will avoid this line to execute: #assert(getprop("ro.product.name") == "a510_...");
5- Zip all files again and name it update.zip.
6- Flash it with CWM.
7- When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right?
That's all.
From this point on you are at factory state. If you connect to internet very likely Acer will send you an OTA update but it's up to you to install it.
Regards.
Click to expand...
Click to collapse
Ok, about 2 months ago, I flashed to a Nothrills ROM and all. Then, I wanted to go back fully stock, and I did the same as you mentioned above.
Today, I tried updating my tab OTA and I am getting "Recovery verified failed..." error. Nothing that I can do. Mind you, I was on stock ROM and all, just that I was rooted.
Thanks.
maybe just root is a problem
I tried updating my tab OTA and I am getting "Recovery verified failed..." error. Nothing that I can do. Mind you, I was on stock ROM and all, just that I was rooted.
Click to expand...
Click to collapse
I tried to get back to factory state , but i got an "instalation aborted" message every time that i tried
Click to expand...
Click to collapse
Lock here : http://forum.xda-developers.com/showthread.php?t=2046832
for me it work but i'm stuck on the iconia tab logo ???!!!
help
look in my thread, my device also doesnt boot. Maybe the link in the thread will help you
ok i succed i just forgot to wipe data from cwm all good ... just waiting jellybean thanks
I'm happy you sorted it out.
Safest way to go back to factory is to load the original bootloader i.e. saying NO to step 7:
7- When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right?
Click to expand...
Click to collapse
There is a new CWM from Nothrills that is compatible with JB.
http://forum.xda-developers.com/showthread.php?t=1866378
Regards
Benedikt_XVI said:
Hey guys,
i installed a stockrom from acer with your instructions and it was completly done. I had Nothrills 700 Franken before.
i just answerd this question : When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right? with YES because i wanted to keep cwm.
The tablet restarted normaly and when setting up acer told me that there is a update so i did the update.
Now the tablet restarted and i get the message : booting recovery kernel imag
and in the second line: Recovery verified fail...
in the middle of the screen you can see the acer logo.
WHAT CAN I DO NOW??? I can't reboot the tablet. Holding the power button get no impact. Shoud i wait till the battery is empyt and then?
I read smthg about fastboot and get a stock recovery. Is that a possibility? if yes, who will give me an instructions what i have to do.
Thx for your help.
But at the Moment i'm very desperate
P.S. Sorry for my bad english
---------- Post added at 12:53 PM ---------- Previous post was at 12:09 PM ----------
I tried the resetbutton and now my tablet restarted normaly.
But when i do a reboot and try to get to the recovery i get the message like i described before.
Is it possible that i install now the cwm from nothrill with adb?or can i get a stock recovery and flash it with adb?
thx for your help
Click to expand...
Click to collapse
with JB
With system powered off, press and hold ‘Power’ and ‘Vol -‘
b. When the system vibrates, release the ‘Power’ button.
c. When the system vibrates a second time, slide your finger from ‘Vol-‘ to ‘Vol+.”
d. When the system vibrates a third time, release that button.
edit: I have check.partition.size=[__prop_undefined__]
when I try to put the stock rom any ideas
thanks
Tutorial to backup to original firmware on A511
You have a Acer Iconia Tab A511 with e.g. A510 (Custom-)ROM without 2G/3G and you can not install the A511 firmware, cause Status 7 or Status 4 errors?
Deleting the line in the install script with the name of the device doesn't work? Using an other editor and 7zip for repacking is not the solution?
try this way
sortous said:
with JB
With system powered off, press and hold ‘Power’ and ‘Vol -‘
b. When the system vibrates, release the ‘Power’ button.
c. When the system vibrates a second time, slide your finger from ‘Vol-‘ to ‘Vol+.”
d. When the system vibrates a third time, release that button.
edit: I have check.partition.size=[__prop_undefined__]
when I try to put the stock rom any ideas
thanks
Click to expand...
Click to collapse
Me too.
Wasn't able to resolve it.
l0l0l0 said:
still no custom rom for this device
Click to expand...
Click to collapse
History
At the first time i tried to build my own custom Rom Mixed with the Huawei P2 + Huawei P6. After installing my own rom my Huawei P2 system was death.
After i tryed a lot of hours to fix it but nothing helps.
All partitions were lost. I tryed to install the stock recovery and update the phone using Update.app. ( But didnt work)
i tryed really all things. but nothing works. Only one thing.
Step by Step Instruction:
Follow the instructions on your own risk
1- Download the B510 Update for the huawei P6 ""Download""
2- Download the Huawei Update extractor ""Download""
1. In Profiles Select Huawei P6
2. Choose the Update file that you have downloaded.
3. Mark
- system.img
- userdata.img
- cust.img
- boot.img
4. Right click on a market line and select "create flashable zip"
STEP 1-4 ""DOWNLOAD"" (This is the P6 Flashable Update.zip)
Big thanks to soyox :good::good:
3- Download this Openrecovery ""Download""
4- Download ADB And Fastboot ""Download""
5- Extraxt the Adb/Fastboot zip file In a folder
6- Copy the recovery.img in the same folder
7- Open the folder and press "shift" + "right-click" on a free place in the folder select "Open command window here"
8- Make shure Usb Debuging is enabled and connect your phone with the PC
9- type "adb reboot bootloader"
10- type "fastboot flash recovery recovery.img"
11- type "fastboot reboot"
12- during startup press "power" + vulume-up + volume-down" at same time and wait for the recovery
13- Select "wipe" "swipe to factory reset"
14- Select "wipe" "format data"
15- Select "advanced" "adb sideload" "swipe to start sideload"
16- move youre flashable zip into the same folder (like recovery.img)
17- Open command window (Step 7-)
18- type "adb sideload "your-zip-name".zip
19- now the install beginn and you have the P6 Firmware installed (Dont try to reboot your Phone it dosnt work)
20- Download Omni Rom and Gapps ""Homade Rom Download"" ""Stable Omni Rom 4,4,2 Download"" ""Gapps Download""
21- Firs install the Homade Version (same like step 1
22- now install the Stable Omni Rom 4,4,2 (same like step 1
23- wipe cache and dalvik
24- install Gapps (same like step 1
25- wipe cache and dalvik
26- Congratulation You Have now a Huawei P2 Phone with The Huawei P6 Firmware And Omni Custom Rom 4.4.2
Get Android 4.4.4
first install the version 4.4.3 ""Download""
after install the version 4.4.4 ""Download""
after install the 4.4.4 install the gapps from the same link done
Follow the instructions on your own risk
Please Give me a feadback if it work.:good:
Say thanks If it work :good:
Knowed Issue:
Phonespeaker works only after plugin a headset and unplug.....
mabe no signal i have signal on my phone but som other didnt have signal
UKW Radio dont work
skjd
when open huawei extractor says "invalid file" help.
Unzup the zip file.
soyox said:
when open huawei extractor says "invalid file" help.
Click to expand...
Click to collapse
Befor select the file unzip it. Make shuer you open a file wiht the ending .app (ex: UPDATE.APP
azsdf
davide_94 said:
Befor select the file unzip it. Make shuer you open a file wiht the ending .app (ex: UPDATE.APP
Click to expand...
Click to collapse
this is what i downloaded and when i select that update.app do not appers system.img look.
soyox said:
this is what i downloaded and when i select that update.app do not appers system.img look.
Click to expand...
Click to collapse
Im really sorry about this wrong link. This Pack should be work.
""Download""
12321
i've try everything and omni get into bootloop. :c and that recovery you post dont work very well.
soyox said:
i've try everything and omni get into bootloop. :c and that recovery you post dont work very well.
Click to expand...
Click to collapse
but after installing the custom rom yo got bootloop. try to boot into the recovery for the custom rom.
volume-up + volume-down + power
do a factory reset. and wipe all partitions. and try to install again.
I made this tutorial after i got the sucess and losed all files that i had used because my pc crashed.. but i think the files should work.
51
davide_94 said:
but after installing the custom rom yo got bootloop. try to boot into the recovery for the custom rom.
volume-up + volume-down + power
do a factory reset. and wipe all partitions. and try to install again.
I made this tutorial after i got the sucess and losed all files that i had used because my pc crashed.. but i think the files should work.
Click to expand...
Click to collapse
got it working, but the radio or signal its gone... :c
soyox said:
got it working, but the radio or signal its gone... :c
Click to expand...
Click to collapse
i under stand it right. you have install it sucesfull?
The radio dont work. on this rom but comming soon.. it will bi fixed from the Omni rom Developer.
now i have install sucessfully the 4.4.3 and the 4.4.4 i attach the links to the thread.
if your rom work pls post some screenshots..
asd
davide_94 said:
i under stand it right. you have install it sucesfull?
The radio dont work. on this rom but comming soon.. it will bi fixed from the Omni rom Developer.
now i have install sucessfully the 4.4.3 and the 4.4.4 i attach the links to the thread.
if your rom work pls post some screenshots..
Click to expand...
Click to collapse
you should add that detail to the post. without signal im going back to stock?. but AWESOME job dude.
soyox said:
you should add that detail to the post. without signal im going back to stock?. but AWESOME job dude.
Click to expand...
Click to collapse
did you tryed the 4.4.4 mabe you got signal there.
and yes i update the information.
And thx
davide_94 said:
did you tryed the 4.4.4 mabe you got signal there.
and yes i update the information.
And thx
Click to expand...
Click to collapse
nothing...
soyox said:
nothing...
Click to expand...
Click to collapse
Okk Thanks for trying. I contacted the Omni developers to fix this Problems. Mabe thy can Help me
davide_94 said:
Okk Thanks for trying. I contacted the Omni developers to fix this Problems. Mabe thy can Help me
Click to expand...
Click to collapse
Ok, I'll be checking your post.
I tried flashing the recovery.img (openrecovery) but my phone doesn't want to go into the recovery.. am I doing something wrong? i'm following instruction by instruction but I just cant seem to get it working. it flashes okay but I can't access it to wipe the data on my phone
jdcrispe95 said:
I tried flashing the recovery.img (openrecovery) but my phone doesn't want to go into the recovery.. am I doing something wrong? i'm following instruction by instruction but I just cant seem to get it working. it flashes okay but I can't access it to wipe the data on my phone
Click to expand...
Click to collapse
if you dont have a unlocked Bootloader unlock it first.. and try again
Unlock
davide_94 said:
if you dont have a unlocked Bootloader unlock it first.. and try again
Unlock
Click to expand...
Click to collapse
http://prntscr.com/49k4at I tried to unlock the bootloader then flash the recovery, still gets stuck on the "Huawei Ascend" screen I really need 4.4
jdcrispe95 said:
http://prntscr.com/49k4at I tried to unlock the bootloader then flash the recovery, still gets stuck on the "Huawei Ascend" screen I really need 4.4
Click to expand...
Click to collapse
if you stuck on the huawei screen Press for long time the power button during the reboot press the hotkeys for recovery. (See tutorial)
davide_94 said:
if you stuck on the huawei screen Press for long time the power button during the reboot press the hotkeys for recovery. (See tutorial)
Click to expand...
Click to collapse
After flashing the broken openrecovery you gave, i have to go back into the boot loader and flash recovery_twrp.img (a recovery that works for me).. so I flashed the zip I created through the huawei update extractor, then tried to flash the homemade zip too, but it failed, so i rebooted and went back into the TWRP recovery, now it's asking for a password. (which I assume is set by Android 4.4, since I haven't set any password).. so I can't continue using this recovery, I need to get the recovery you gave me to work.
that's my current issue.
Any support would be appreciated
Spirit Free
Does spirit free radio work?
Ok so I have been trying to install cyanogenmod for a while now and have looked at various different differet tutorials but the place where i get stuck is on the custom recovery. When ever I try to install either Clockwork recovery or TWRP, I always get the error "this image file is corrupted". So does anyone know why this is. I am using a lenovo windows 8.1 system and Motorola XT032.
Please Help
Download the cyanogen mod zip again and put it in your SD card...wipe data (not the one on your emulated storage) and system partition, choose install zip from SD card, navigate to the cyanogen mod zip you downloaded and choose to flash it...
If you are getting an error while flashing cwm via fastboot then download the image again...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
pfufle said:
Download the cyanogen mod zip again and put it in your SD card...wipe data (not the one on your emulated storage) and system partition, choose install zip from SD card, navigate to the cyanogen mod zip you downloaded and choose to flash it...
If you are getting an error while flashing cwm via fastboot then download the image again...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Shall I do this on my pc or on my phone?
Your choice
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
pfufle said:
Your choice
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Where shall I download these from?
BurstChaos said:
Where shall I download these from?
Click to expand...
Click to collapse
The official cyanogen mod website...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Ok so I tried it but just noticed that every disk image file i download ends up as corrupt, any solutions.
You mean, you are not able to install a custom recovery? The step when you type "fastboot flash recovery recovery.img"? My first choice would be to try it on some other computer from scratch, but I'm just guessing, sorry. You sure, youre bootloader is succesfully unlocked?
Don't want to confuse you with another tut, but I personally would recommend this guide: http://wiki.cyanogenmod.org/w/Install_CM_for_falcon
Hwyl.Fawr said:
You mean, you are not able to install a custom recovery? The step when you type "fastboot flash recovery recovery.img"? My first choice would be to try it on some other computer from scratch, but I'm just guessing, sorry. You sure, youre bootloader is succesfully unlocked?
Click to expand...
Click to collapse
Yes I am not able to mount the custom recovery, sorry for not using the words correctly. I am positive that my bootloader is unlocked, everytime my phone is switched on it comes up with the warning sign.
BurstChaos said:
Yes I am not able to mount the custom recovery, sorry for not using the words correctly. I am positive that my bootloader is unlocked, everytime my phone is switched on it comes up with the warning sign.
Click to expand...
Click to collapse
Download adb drivers and Motorola drivers again...Uninstall these drivers and reinstall them again...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
i suggest to download ADB tools again, the recovery of your choice from a different site and flash it from your pc, be sure to put te correct filenames and the cmd says is successful if doesn't work try from a different pc or try a different version of the custom recovery, after that install cyanogenmod is very easy
Ok so I tried everything but while searching for an older version of them I found Mototools. So i downloaded mototools and used it to download the latest cwm recovery but now I cant seem to be able to find where it saverd the file and I know this works because I used it to remove the boot up warning. Does anyone have any suggestions about where it could be?
BurstChaos said:
Ok so I tried everything but while searching for an older version of them I found Mototools. So i downloaded mototools and used it to download the latest cwm recovery but now I cant seem to be able to find where it saverd the file and I know this works because I used it to remove the boot up warning. Does anyone have any suggestions about where it could be?
Click to expand...
Click to collapse
It will be in one of the folders of that tool...please send an image of the boot error you are getting...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
pfufle said:
It will be in one of the folders of that tool...please send an image of the boot error you are getting...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Hi
I found the folder Data/Recovery which is where the cwm is supposed to save but it isnt there and isnt downloading there.
BurstChaos said:
Hi
I found the folder Data/Recovery which is where the cwm is supposed to save but it isnt there and isnt downloading there.
Click to expand...
Click to collapse
Well try downloading it again or download it from XDA and put it in that folder...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
pfufle said:
Well try downloading it again or download it from XDA and put it in that folder...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
I attempted to download it again from mototools but it never worked so I download it from XDA and tried to open it but the same error showed up as before so I opened it in mototools and flashed it and it came with it being succesful but I can never open up the recovery.
BurstChaos said:
I attempted to download it again from mototools but it never worked so I download it from XDA and tried to open it but the same error showed up as before so I opened it in mototools and flashed it and it came with it being succesful but I can never open up the recovery.
Click to expand...
Click to collapse
Please send an image or a video of what error you are getting...if you are just too irritated then just reflash the stock firmware via fastboot...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
This is the error that I keep getting while attemting to mount the recovery.
BurstChaos said:
This is the error that I keep getting while attemting to mount the recovery.
Click to expand...
Click to collapse
Well then just use another PC or dual boot Ubuntu or windows 7 or give your windows 8 a format...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Ok so thank you for your help I finally manageed to flash Cyanogenmod 11 but now whenever I switch on my phone I cannot use it as it says "unfortunatley the process com.android.systemui has stopped " does anyone know how to solve this?
please help me
i dont know wat is version of my cwm
But it shows only six options that are as listed below:
1. Reboot
2. Apply update from ADB
3. Apply update from SDCARD
4. wipe data/factory reset
5. wipe cache partition
6. apply update from cache
when i try third option i.e. Apply update from SDCARD, it gives an error msg unknown volume for path
please help me, i want to install lollipop os on my phone or atleast kitkat rom, but not able to install
please kindly help :crying:
model no. GT-I8552
Samsung galaxy grand Quattro
Hmmm...
Are you sure this is CWM?
The options you see come from a stock recovery.
Try flashing another version of CWM.
How???
janekmuric said:
Are you sure this is CWM?
The options you see come from a stock recovery.
Try flashing another version of CWM.
Click to expand...
Click to collapse
the question arises how???
please tell procedure for flashing another version of cwm
CWM
jaskeerat11 said:
the question arises how???
please tell procedure for flashing another version of cwm
Click to expand...
Click to collapse
YOU ARE DOING EVERYHING ON YOUR OWN RISK.
I DID NOT TEST THIS.
Download Samsung drivers here: http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-USB-Driver-for-Mobile-Phones-15270.shtml
Download odin: http://d-h.st/er8
The CWM revovery itself: http://d-h.st/0Fw
1. First be sure USB Debugging is checked in ur device ( Settings>Developer Options>USB Debugging )
2. Extract the Odin file from the zip.
3. Open Odin3 (Run As Administrator).
4. Put your device in download mode. To do so, press Volume Down And Home And Power Button all together and when it vibrates release
Power Button but keep pressing left ones. You should have a triangle with an android janitor while it's saying downloading ..
VOL UP TO CONTINUE...
5. Now connect USB to PC ,you should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
6. Go into the PDA section and select your .tar file.(CWM Recovery)
7. Dont check any option (F.reset time and Auto reboot are checked by default) So just uncheck Auto Reboot.
8. Now click Start.
9. When it's finished, it should say that "Res OK" in Odin..
10. Now remove ur USB and remove ur battery and put it back and go to Recovery Mode (Volume UP And Home And Power Button all
together and when it vibrates release Power Button but keep pressing left ones).
If you don't see Developer options go to Stettings>About phone> press Build version 10 times quickly
I dont know. problem?
Hi guys,
I accidentally wiped /system from my phone, and now I can't get it back.
I've tried downloading the OS zip from the Huawei site and running it from an SD card like it says, but it just fails.
I've also tried extracting system.img from the file with a tool I found here, but it won't flash with fastboot, it just fails saying it can't load the file. It seems like maybe it's encrypted in some way.
Does anyone have any ideas on what I can do to fix this? Can anyone upload a system.img file I can flash to my device?
Thanks
I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.
Thank you so much! It worked! It's booted up fine after installing the update from the SD card.
I'm just doing the OTA updates now.
AGoodName said:
Thank you so much! It worked! It's booted up fine after installing the update from the SD card.
I'm just doing the OTA updates now.
Click to expand...
Click to collapse
Great, glad to hear that
??
i7mmodi said:
Great, glad to hear that
Click to expand...
Click to collapse
Hi,
I don't understand why when stock recovery I flash the stock recovery via Fastboot and when it reboots, it stuck at 90% with the message Huawei software installing...
Please Help me what to do
lvpl said:
Hi,
I don't understand why when stock recovery I flash the stock recovery via Fastboot and when it reboots, it stuck at 90% with the message Huawei software installing...
Please Help me what to do
Click to expand...
Click to collapse
Do you have unlocked bootloader !!
and use stock recovery in this thread , don't use from another source .
i7mmodi said:
I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.
Click to expand...
Click to collapse
hi do u have the p8 custom rom? the link u stated is not working. thks
http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436
AGoodName said:
http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436
Click to expand...
Click to collapse
thks but my phone still cannot boot after installing.
But after it flashes it should let you run the update from the SD card, just need to reflash stock recovery.
i7mmodi said:
I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.
Click to expand...
Click to collapse
how could the p8 rom work with our p8 max?
so this mean that i can flash this rom ?
Flash official recovery. Download official b021 ROM. Create "dload" folder in your SD card. Extract b021 and put into dload folder. Press volume up+ down button. System will auto install and reboot.
Good luck
william1974 said:
thks but my phone still cannot boot after installing.
Click to expand...
Click to collapse
because there is an update , you should redownload the official rom "V100R001C233B023" , they update it already .
so simply , these are steps :
1- download the official rom from here :
http://download-c.huawei.com/download/downloadCenter?downloadId=53426&version=166267&siteCode=cn
2- download stock recovery from here :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
3- unzip official rom and put "dload" folder in root of Sd card then put it in P8max.
4- keep pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
now you should boot with official rom.
Not working
i7mmodi said:
because there is an update , you should redownload the official rom "V100R001C233B023" , they update it already .
so simply , these are steps :
1- download the official rom from here :
http://download-c.huawei.com/download/downloadCenter?downloadId=53426&version=166267&siteCode=cn
2- download stock recovery from here :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
3- unzip official rom and put "dload" folder in root of Sd card then put it in P8max.
4- keep pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
now you should boot with official rom.
Click to expand...
Click to collapse
I performed all tasks but says rom is corrupt
Can you please upload stock recovery as link not working anymore.
Bumping for link update too please
qoozy said:
Bumping for link update too please
Click to expand...
Click to collapse
Stock Recovery is in P8Max Root Thread.
Hirs_E_Fruit said:
Stock Recovery is in P8Max Root Thread.
Click to expand...
Click to collapse
I followed these steps, but do i have to install B029 stock now?
cause it always says that software is incompatible with current version??
Hi guys
the link for stock recovery has been expired
anyone can upload it for me?