Database Info

[Q] Help with installing cyanogenmod 11 Motorola Moto G

Ok so I have been trying to install cyanogenmod for a while now and have looked at various different differet tutorials but the place where i get stuck is on the custom recovery. When ever I try to install either Clockwork recovery or TWRP, I always get the error "this image file is corrupted". So does anyone know why this is. I am using a lenovo windows 8.1 system and Motorola XT032.
Please Help

Download the cyanogen mod zip again and put it in your SD card...wipe data (not the one on your emulated storage) and system partition, choose install zip from SD card, navigate to the cyanogen mod zip you downloaded and choose to flash it...
If you are getting an error while flashing cwm via fastboot then download the image again...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------

pfufle said:
Download the cyanogen mod zip again and put it in your SD card...wipe data (not the one on your emulated storage) and system partition, choose install zip from SD card, navigate to the cyanogen mod zip you downloaded and choose to flash it...
If you are getting an error while flashing cwm via fastboot then download the image again...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Shall I do this on my pc or on my phone?

Your choice
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------

pfufle said:
Your choice
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Where shall I download these from?

BurstChaos said:
Where shall I download these from?
Click to expand...
Click to collapse
The official cyanogen mod website...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------

Ok so I tried it but just noticed that every disk image file i download ends up as corrupt, any solutions.

You mean, you are not able to install a custom recovery? The step when you type "fastboot flash recovery recovery.img"? My first choice would be to try it on some other computer from scratch, but I'm just guessing, sorry. You sure, youre bootloader is succesfully unlocked?
Don't want to confuse you with another tut, but I personally would recommend this guide: http://wiki.cyanogenmod.org/w/Install_CM_for_falcon

Hwyl.Fawr said:
You mean, you are not able to install a custom recovery? The step when you type "fastboot flash recovery recovery.img"? My first choice would be to try it on some other computer from scratch, but I'm just guessing, sorry. You sure, youre bootloader is succesfully unlocked?
Click to expand...
Click to collapse
Yes I am not able to mount the custom recovery, sorry for not using the words correctly. I am positive that my bootloader is unlocked, everytime my phone is switched on it comes up with the warning sign.

BurstChaos said:
Yes I am not able to mount the custom recovery, sorry for not using the words correctly. I am positive that my bootloader is unlocked, everytime my phone is switched on it comes up with the warning sign.
Click to expand...
Click to collapse
Download adb drivers and Motorola drivers again...Uninstall these drivers and reinstall them again...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------

i suggest to download ADB tools again, the recovery of your choice from a different site and flash it from your pc, be sure to put te correct filenames and the cmd says is successful if doesn't work try from a different pc or try a different version of the custom recovery, after that install cyanogenmod is very easy

Ok so I tried everything but while searching for an older version of them I found Mototools. So i downloaded mototools and used it to download the latest cwm recovery but now I cant seem to be able to find where it saverd the file and I know this works because I used it to remove the boot up warning. Does anyone have any suggestions about where it could be?

BurstChaos said:
Ok so I tried everything but while searching for an older version of them I found Mototools. So i downloaded mototools and used it to download the latest cwm recovery but now I cant seem to be able to find where it saverd the file and I know this works because I used it to remove the boot up warning. Does anyone have any suggestions about where it could be?
Click to expand...
Click to collapse
It will be in one of the folders of that tool...please send an image of the boot error you are getting...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------

pfufle said:
It will be in one of the folders of that tool...please send an image of the boot error you are getting...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Hi
I found the folder Data/Recovery which is where the cwm is supposed to save but it isnt there and isnt downloading there.

BurstChaos said:
Hi
I found the folder Data/Recovery which is where the cwm is supposed to save but it isnt there and isnt downloading there.
Click to expand...
Click to collapse
Well try downloading it again or download it from XDA and put it in that folder...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------

pfufle said:
Well try downloading it again or download it from XDA and put it in that folder...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
I attempted to download it again from mototools but it never worked so I download it from XDA and tried to open it but the same error showed up as before so I opened it in mototools and flashed it and it came with it being succesful but I can never open up the recovery.

BurstChaos said:
I attempted to download it again from mototools but it never worked so I download it from XDA and tried to open it but the same error showed up as before so I opened it in mototools and flashed it and it came with it being succesful but I can never open up the recovery.
Click to expand...
Click to collapse
Please send an image or a video of what error you are getting...if you are just too irritated then just reflash the stock firmware via fastboot...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------

This is the error that I keep getting while attemting to mount the recovery.

BurstChaos said:
This is the error that I keep getting while attemting to mount the recovery.
Click to expand...
Click to collapse
Well then just use another PC or dual boot Ubuntu or windows 7 or give your windows 8 a format...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------

Ok so thank you for your help I finally manageed to flash Cyanogenmod 11 but now whenever I switch on my phone I cannot use it as it says "unfortunatley the process com.android.systemui has stopped " does anyone know how to solve this?

Nexus 5 --- No OS --- Stuck on Google logo

ok i was trying to flash a lolipop rom on my N5 via TWRP. So i went into wipe>format data>yes and Andvanced wipe>checked everything and wiped.
Now my downloaded file is gone (stupid me, i know) and when i try to reboot it says no OS installed. If i go ahead, phone is stuck on google logo. PLEASE HELPPP :crying:
Thanks!

Press the power button for 10 seconds, the phone should turn off. Then press VOL DN and PWR again and your bootloader should appear. From there you can select recovery and fix the no OS issue.

LossyDragon said:
Press the power button for 10 seconds, the phone should turn off. Then press VOL DN and PWR again and your bootloader should appear. From there you can select recovery and fix the no OS issue.
Click to expand...
Click to collapse
yes i can go to recovery. it takes me to TWRP. how do i solve it from there?

kashsih93 said:
yes i can go to recovery. it takes me to TWRP. how do i solve it from there?
Click to expand...
Click to collapse
With TWRP, you can select Advanced > SIDELOAD. Then with a compatible ADB.exe (and it's files) you can flash a rom using 'adb sideload <filename>.zip'.
Note: Check device manager after sliding to enable Sideload. Make sure your phone shows up as a recognized device.
Edit: Also make sure your .zip file is in the same folder your ADB.exe is in.

kashsih93 said:
yes i can go to recovery. it takes me to TWRP. how do i solve it from there?
Click to expand...
Click to collapse
Did you place your backup onto your desktop? If you didn't then all of your data is gone but you can use http://forum.xda-developers.com/goo...olkit-wugs-nexus-root-toolkit-v1-8-3-t2517778 to flash Lollipop onto your Nexus but you may have to do it via fastboot.

kashsih93 said:
ok i was trying to flash a lolipop rom on my N5 via TWRP. So i went into wipe>format data>yes and Andvanced wipe>checked everything and wiped.
Now my downloaded file is gone (stupid me, i know) and when i try to reboot it says no OS installed. If i go ahead, phone is stuck on google logo. PLEASE HELPPP :crying:
Thanks!
Click to expand...
Click to collapse
Or push any custom rom/Gapps from the PC to the sdcard with adb: adb push romname.zip /sdcard/ and manualy flash the rom in recovery.

koricua74 said:
Did you place your backup onto your desktop? If you didn't then all of your data is gone but you can use http://forum.xda-developers.com/goo...olkit-wugs-nexus-root-toolkit-v1-8-3-t2517778 to flash Lollipop onto your Nexus but you may have to do it via fastboot.
Click to expand...
Click to collapse
OMG this worked!!!!!! Thanka a million!!!!!!

TWRP mount option allows mtp. You can copy the flashable zip eg bixxie stock zip. After copying just disable mtp and flash as regularly.
With lollipop though the recovery gets messed up after bit so flash SuperSU zip immediately after flashing the stock zip
Sent from my Nexus 5 using XDA Free mobile app

kashsih93 said:
OMG this worked!!!!!! Thanka a million!!!!!!
Click to expand...
Click to collapse
No problem and enjoy Lollipop.

I terrible bricked my Honor. Fastboot not working. Need help.

Hi I install one application (host name changer) and restart the phone and it stop working. Stops at HONOR screen. I enter to bootloader, open multi-tool and change recovery. Unfortunately bootloader not eorking ok, because when I wanted to upload IMG files to unbrick the phone, I get the error in Multi-tool. I decided to format/clean all data (I use CWM recovery and later also TWRP recovery). Again uploaded stock recovery and try use 3 buttons. Unfortunately installation start and after one second failed.
I also try to use QTADB to upload updata.apk but it not working - there is problem with bootloader. Also Minimal ADB not working - doesn't see Honor.
How can I upload / install rom now?
Is it possible instal ROM from external SD card? I try but on external card (using CWM) I see no files?

You can't use other recovery than the stock one to use 3 buttons. If the phone is not recognized by adb I'm not sure if you can restore it.

I used 3 buttons with stock recovery, and installation failed.

Did you replaced build.prop and local.prop with the original ones before 3 buttons?
Las night installed B310 without any problems.

I did not replace build.prop and local.prop because I install some other app which - I guess - modify build.prop and this is why I have that problems. Afert I reboot phone it brick on HONOR loco and Minimal ADB do not response. When I connect USB cable and enter to bootloader the PC see the phone, Hisuite start but can not connect. So I have problem with bootloader - it does not response using Minimal ADB. Onlu Multitool lets me change recovery. All I can do now is enter to recovery, bootloader, change recovery (only with Multitool), start install ROM (using 3 buttons) but it failed immediately.

Try to install stock dev rom 4.x.x
4.x.x roms have not prop checker so you can install them via 3btns

But how to upload this rom to HH? All I can do is using Minimal adb (not all function, but sometime I can use pull and push functions);

[email protected] said:
But how to upload this rom to HH? All I can do is using Minimal adb (not all function, but sometime I can use pull and push functions);
Click to expand...
Click to collapse
Put it on a SD Card?
If you can enter fastboot and your bootloader is unlocked you can try to flash the system.img via fastboot. But since you have CWM it shoul be unlocked

Finally the Multi-tool stoped responding (I couldn't upload img files to unbrick - there was an error).
But suddenly the Minimal ADB started responding, and I uploaded build.prop and after that I flash recovery.img, system.img, boot.img and cust.img.
Thanks for help.

The following is irrelevant. Just to share.
I messed up honor 6 plus once. It booted then it permanently hanged. Black screen, home launcher does not respond, no navigation bar. Power button worked with the options to reboot and power down.
Before I messed it up, I have unlocked the boot loader and flashed cwm and rooted by install zip.
I tried to fix it by cwm wipe data, wipe cache, wipe dalvik but that did not help.
Later I found that I was able to boot into fastboot mode and managed flashing back stock recovery. Then I downloaded a full stock ROM, decompressed the dload and copied it to root of a sdcard. Then I applied three finger update. It worked and fixed the problem.

HmMarques said:
Did you replaced build.prop and local.prop with the original ones before 3 buttons?
Las night installed B310 without any problems.
Click to expand...
Click to collapse
What are build.prop and local.prop ? Where to replace it ? How to get these type of file ?
Please help me my Honor 6 H60 L02 is bricked and I cant understand anything..

Devandrogeek said:
What are build.prop and local.prop ? Where to replace it ? How to get these type of file ?
Please help me my Honor 6 H60 L02 is bricked and I cant understand anything..
Click to expand...
Click to collapse
Read this thread carefully: http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180
There you have all information.
Search here for your buil.prop and local.prop : https://www.mediafire.com/folder/o3tgl8z4u21dz/STOCK_build.prop_&_local.prop

HmMarques said:
Read this thread carefully: http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180
There you have all information.
Search here for your buil.prop and local.prop : https://www.mediafire.com/folder/o3tgl8z4u21dz/STOCK_build.prop_&_local.prop
Click to expand...
Click to collapse
Actually my question was, how to get a stock recovery and how to set permissions ?

Devandrogeek said:
Actually my question was, how to get a stock recovery and how to set permissions ?
Click to expand...
Click to collapse
Well to set permissions you must use either root explorer or ES filexplorer, personally I use the last one with root privileges on.
after you move the files to correspondent folder you need to click on it for a few seconds and then go to properties/permissions and check only left column all 3 and middle column the first from above.
As for stock recovery go to the thread of Honor multi-tool, there you have how to and were to download stock recovery.
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060

HELP HELP HELP!!! Please!!! I cant put my Honor in fastmode!!! I tried to put cwm in Marshmallow 6.0 and bricked!!! I was able to use but I did a factory reset and it just dont pass the honor screen at the beginnin!!! Please Somebudy help!!! Sorry for my bad english!!!

Hi all, bricked my honor 6 plus firmware b133 after updating it with OTA b334 to b503 (marshmallow 6.0) RU.zip
Now after powering on there is bootlogo only for a second, and black screen after with flashing led lights with green and red.
Can't enter to recovery mode, only fastboot mode is available when connecting to pc.
Can flash without errors all files from fastboot: system.img, recovery.img, cust.img, boot.img but it can't help to fix phone
Will buy you some beer for successful solution
Thank you

[SOLVED] H60-L02 bricked beyond recovery? Plz help me!

edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)

mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.

With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!

mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.

Thx. I will give it a try when I'm back from work.
I let you know if it is working.

mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice

Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike

mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.

Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.

mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.

It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike

The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.

igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?

error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.

igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.

Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..

igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.

zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse

i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!

mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"

How to get back to full stock (unrooted and everything) on nougat.

I have the FRD-L14.
Rooted
With TWRP
Nougat

download the current firmware and extract the update app into sd card/dload(create this folder in sd card ) and force update power off your device and press all the three buttons thats it u have on stock with no root and no twrp recovery

Rommco05 said:
Hi, @J V A please I need now your help, can u provide full backup in twrp your rom? If u have frd-l14c567 and Nougat, shut be very helpful for another member @coolest35 whitch have trouble with his phone and I think best, easy and finaly way to make again his phone ok is via backup. thx
Click to expand...
Click to collapse
I'm on full stock now. I'm not rooted nor have TWRP installed

Rommco05 said:
Ok, thanks I try find if is possible to make backup without unlocked bootloader
Click to expand...
Click to collapse
Did he try the Marshmallow Rollback package? Flash via dload method?

Rommco05 said:
Yes :/
Click to expand...
Click to collapse
Try these steps:
1. Flash TWRP in fastboot. Make sure to use the TWRP from here.
2. Install CM13 via TWRP. Installing CM13 allows you to wipe Data partition later.
3. Reboot into TWRP and wipe Data partition.
4. Create a folder with a name dload in root of SDcard.
5. Download Full Firmware of Marshmallow. Copy the update.app from the zip file into the dload folder.
6. Turn off the phone. Then hold Volume Up + Volume Down + Power Button. Let go of the buttons once you see the Honor logo. This will flash the Marshmallow Firmware.
7. That's it!

J V A said:
Try these steps:
1. Flash TWRP in fastboot. Make sure to use the TWRP from here.
2. Install CM13 via TWRP. Installing CM13 allows you to wipe Data partition later.
3. Reboot into TWRP and wipe Data partition.
4. Create a folder with a name dload in root of SDcard.
5. Download Full Firmware of Marshmallow. Copy the update.app from the zip file into the dload folder.
6. Turn off the phone. Then hold Volume Up + Volume Down + Power Button. Let go of the buttons once you see the Honor logo. This will flash the Marshmallow Firmware.
7. That's it!
Click to expand...
Click to collapse
My frn ,glad that ur 7 step guide is awesome. But plz add a line in second bracket that + u should install erecovery to recovery2 partition if u flashed twrp in erecovery partition+.