Related
I tried to use the search and google but didn't really find anything helpful. Almost 2 years ago, I unlocked the bootloader back on honeycomb and did custom recovery, root, and custom rom. Then a little while after ICS came out, I did the OTA update.
Today, I reset the xoom back to stock ICS and tried to unlock the bootloader again...thinking nothing of it. The process was taking a few minutes so I decided to get a snack and when I came back it was rebooting.
I assumed that it worked and continued to try and fastboot a recovery image. The recovery image installed and I did another reboot but was greeted with the android welcome screen. Anyways I went through the menus and then tried to enter recovery and it gave me an android laying on its back with and exclamation point above his open chest.
I hard rebooted and can still get into my device, but adb cannot seem to find my xoom anymore. I have tried it on a 64bit desktop and laptop with no luck.
Have I messed up? Or is there a simple fix that I am missing? Thanks in advance for any help!
Can you get into fastboot mode? The second time you unlocked did you have to go through the questions on your xoom again?
dfib1 said:
Can you get into fastboot mode? The second time you unlocked did you have to go through the questions on your xoom again?
Click to expand...
Click to collapse
Yes, I can get into fastboot by holding the volume down key and the power button. That's fastboot, right?
Yes, I had to go through the menus the second time I unlocked.
sounds like the recovery you try to fastboot did not take or the rom was corrupt.. Which recovery was it? Do you want to be rooted and run a custom rom or completely stock? what xoom do you have(wifi, 3g, 4g)
dfib1 said:
sounds like the recovery you try to fastboot did not take or the rom was corrupt.. Which recovery was it? Do you want to be rooted and run a custom rom or completely stock? what xoom do you have(wifi, 3g, 4g)
Click to expand...
Click to collapse
I want to flash this ROM
http://forum.xda-developers.com/showthread.php?t=1997434
With whichever recovery is best. I tried flashing this recovery:
http://forum.xda-developers.com/showthread.php?t=1074979
I am on a 4G xoom on 4.0.4 but I don't use my data plan. I would like to be on a nice stable build of 4.2.
Download your rom choice, gapps and put them on the root of your sd card. If they are already there skip this step
I like TWRP Recovery the best. Easy to use and lots of options.
download this Twrp 2.4 img to the folder you hve fastboot in
open a cmd prompt in that o that folder
type fastboot flash recovery TWRPv2.4.1.0.img
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
You should be in twrp 2.4
select backup/restore and backup your current system
select install and find your rom select asnd then swipe to flash
when done then select home
select install again and find the gapps package and install
when done select wipe dalvick/cache
when done select reboot
select system
you should be good to go.
Well I got through all of the steps, but when I try to boot I get stuck in a loop of the roms boot logo. Is it okay to flash a wingray rom over a stingray device?
dfib1 said:
Download your rom choice, gapps and put them on the root of your sd card. If they are already there skip this step
I like TWRP Recovery the best. Easy to use and lots of options.
download this Twrp 2.4 img to the folder you hve fastboot in
open a cmd prompt in that o that folder
type fastboot flash recovery TWRPv2.4.1.0.img
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
You should be in twrp 2.4
select backup/restore and backup your current system
select install and find your rom select asnd then swipe to flash
when done then select home
select install again and find the gapps package and install
when done select wipe dalvick/cache
when done select reboot
select system
you should be good to go.
Click to expand...
Click to collapse
Well I got through all of the steps, but when I try to boot I get stuck in a loop of the roms boot logo. Is it okay to flash a wingray rom over a stingray device?
I think it is fine just the 3g/4g won't work.
I can get you going again but you are going to be starting with a locked honeycomb device. You will then have to either let it update to ICS or JB or unlock, root, install custom recovery and flash a rom. What xoom do you have 3g or 4g?
dfib1 said:
Download your rom choice, gapps and put them on the root of your sd card. If they are already there skip this step
I like TWRP Recovery the best. Easy to use and lots of options.
download this Twrp 2.4 img to the folder you hve fastboot in
open a cmd prompt in that o that folder
type fastboot flash recovery TWRPv2.4.1.0.img
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
You should be in twrp 2.4
select backup/restore and backup your current system
select install and find your rom select asnd then swipe to flash
when done then select home
select install again and find the gapps package and install
when done select wipe dalvick/cache
when done select reboot
select system
you should be good to go.
Click to expand...
Click to collapse
Okay I restored it again but this time i did a factory reset and wipe dalvick before flashing the rom and gapps. It works! Thank you for your help!
However, could I ask how to root this thing?
since you have a custom recovery on it already and are unlocked.
Download this file Universal xoom root place it on the root of your sd card and flash it. Then reboot and try a root required app such as root checker
dfib1 said:
since you have a custom recovery on it already and are unlocked.
Download this file Universal xoom root place it on the root of your sd card and flash it. Then reboot and try a root required app such as root checker
Click to expand...
Click to collapse
Thanks! Got it!
g;lad to hear it.
hi
i have unlocked the phones boot loader and uploaded the recovery file to the phone, however i cant go in to recovery mode, i have selected recovery from the boot menu but the phone just boots normally
everything else has completed with out error, not sure what to do now to get the phone rooted so i can sort my space issue out.
mark
Read the rooting tutorial again. Then you'll answer yourself what's wrong
Sent from my HTC Explorer A310e using xda app-developers app
shortyoko said:
Read the rooting tutorial again. Then you'll answer yourself what's wrong
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Give me a clue please
ful56 said:
Give me a clue please
Click to expand...
Click to collapse
Ok so my bat file doesn't have this
fastboot flash boot boot.img
But does have this
fastboot flash recovery recovery.img
Do I need the boot.img line in the bat file?
ful56 said:
Ok so my bat file doesn't have this
fastboot flash boot boot.img
But does have this
fastboot flash recovery recovery.img
Do I need the boot.img line in the bat file?
Click to expand...
Click to collapse
hi
read the below link for CWM u can just flash it via the PC but u need to have the HTC drivers on ur PC and go to fastbootUSB mode and click on the bat file and u will have the CWM
link : http://forum.xda-developers.com/showthread.php?t=1415223
haree said:
hi
read the below link for CWM u can just flash it via the PC but u need to have the HTC drivers on ur PC and go to fastbootUSB mode and click on the bat file and u will have the CWM
link : http://forum.xda-developers.com/showthread.php?t=1415223
Click to expand...
Click to collapse
Hello
That's the guide i followed, I run the bat file put it into fast USB mode. It copies the file and I see a small progress bar on the hand set then it says completed successfully. When I try to put it into recovery it just boots as normal and yes I am highlighting the recovery bit in the menu the hitting the power button to select it.
put phone into fastboot mode (you know how already)
use adb command:
Code:
fastboot flash recovery recovery.img
once successfully sent to phone, shut down phone then try again to access recovery (hold vol - and press power button once, scroll down to recovery) hope it helps
ful56 said:
hi
i have unlocked the phones boot loader and uploaded the recovery file to the phone, however i cant go in to recovery mode, i have selected recovery from the boot menu but the phone just boots normally
everything else has completed with out error, not sure what to do now to get the phone rooted so i can sort my space issue out.
Click to expand...
Click to collapse
If you're having difficulty flashing recovery, you can easily do it with ROM Manager.
All you've to do is downloading ROM Manager from Play Store, open it and choose Flash ClockworkMod Recovery, follow the steps, wait and you're done. PS, your phone must be rooted before using ROM Manager. It will flash latest version CWM Recovery available for your device.
Please hit 'Thanks' if I helped you.
*Modify*
Sorry I read it later that your phone is not rooted yet. So you can first install superuser.apk by flashing superuser.zip from inbuilt recovery(you'll find the way in rooting tutorial) and then follow the above mentioned steps.
developerindeed said:
If you're having difficulty flashing recovery, you can easily do it with ROM Manager.
All you've to do is downloading ROM Manager from Play Store, open it and choose Flash ClockworkMod Recovery, follow the steps, wait and you're done. PS, your phone must be rooted before using ROM Manager. It will flash latest version CWM Recovery available for your device.
Please hit 'Thanks' if I helped you.
*Modify*
Sorry I read it later that your phone is not rooted yet. So you can first install superuser.apk by flashing superuser.zip from inbuilt recovery(you'll find the way in rooting tutorial) and then follow the above mentioned steps.
Click to expand...
Click to collapse
I reckon there is a problem with the recovery on the phone as once i have selected recovery on the boot loader the phone boots normally, unless is is a key combination i need to press while it is trying to boot into recovery, i dunno
ful56 said:
I reckon there is a problem with the recovery on the phone as once i have selected recovery on the boot loader the phone boots normally, unless is is a key combination i need to press while it is trying to boot into recovery, i dunno
Click to expand...
Click to collapse
If your using a sense ROM, it doesn't fully shut down on power off. You have to take out the battery and put it back in before holding power and volume down to boot into recovery. If you can't get into the recovery, reflash it.
Sent from my HTC Explorer A310e using xda app-developers app
nachiketa.ramesh said:
If your using a sense ROM, it doesn't fully shut down on power off. You have to take out the battery and put it back in before holding power and volume down to boot into recovery. If you can't get into the recovery, reflash it.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Thanks
I reckon it needs a reflash then, is there a guide for this?
ful56 said:
I reckon there is a problem with the recovery on the phone as once i have selected recovery on the boot loader the phone boots normally, unless is is a key combination i need to press while it is trying to boot into recovery, i dunno
Click to expand...
Click to collapse
This was the method given in the rooting tutorial:
After unlocking bootloader,
Copy SuperUser.Zip file into SD-Card and then turn OFF your HTC Explorer (Take Out Your Battery > Place it Again). Then Press & Hold Volume DOWN + Power key to get into Bootloader.
Then Select Fastboot with Vol Keys and Press Power Key > When You are in fastboot connect your HTC Explorer to PC Via USB Cable
Extract Recovery.zip file anywhere on your pc and run the Recovery.bat file, wait a moment and you are done.
Now, after running the Recovery.bat file and successfully completing the above step press Power Key to get back into Bootloader:
Using Vol Keys > Select Recovery,
Wait until this Recovery screen is shown (It Could be in blue colour or any other colour):
Using Vol Keys Select Install zip from sdcard and Press Power Key > Then Choose Zip From SD-card and Press Power Key and finally select the Superuser.zip file using Vol Keys and Press Power Key.
And when it shows Install complete or something, you've successfully rooted your device.
From above method you've managed to install a temp. recovery from that recovery.bat but you need a recovery you can access without connecting it to PC but with bootloader.
After it, reboot back. Install application ROM Manager from Play Store. Open it when installed, grant superuser permission(just select yes when a pop-up appears. It asks root permission). Now follow the steps I told you before. You can do rest of the things easily.
However you can install a custom ROM(upgrade your android version) only by unlocking bootloader and flashing recovery. But as your warranty is already void now, root your phone and enjoy all features around.
Like you can install link2sd from Play Store. It can forcefully move any app to sd-card. So your memory problem is out.
Yes, now don't forget to hit 'Thanks' or you would not succeed.
Hello,
Yesterday there was an update for the Moto G, I confirmed to do the update. Since then the phone is in a reboot loop. I mean it doesn't matter what ever I do,the phone restart itself in every 2-3 minutes. The phone is rooted.
I've tried to do a factory reset from the setting,however nothing happens when I want to erase the settings. In the bootloader if I chose Recovery or Factory reset,the phone reboots.
I've got a tip that I should remove the update file from the /chace directory,however I don't know how to do so,as the phone keeps reboot itself.
The only place,where the phone is not restarts is in the bootloader.
Is there any way to somehow solve this problem without flash a stock rom ?
Thanks for your help!
Regards,
Péter
The same here. Help!
Tussky said:
Hello,
I've tried to do a factory reset from the setting,however nothing happens when I want to erase the settings. In the bootloader if I chose Recovery or Factory reset,the phone reboots.
Click to expand...
Click to collapse
You have to press volume up instead of power to choose something in fastboot menu.
Unroot and if used custom recovery go back to stock recovery.
mokkami said:
Unroot and stock recovery.
Click to expand...
Click to collapse
How should I do the unroot ? I find this solution,but I can't post the link,as I didn't have 10+ posts... its in the site unlockr and there's an article about moto g unroot.
However I can't enable the usb debug,as the phone restart faster,than I'am able to do this.
Yes I know I have to press volume up,however if I chose recovery it's reboot itself,so I'am not able to select Recovery from the bootloader.
Tussky said:
How should I do the unroot ? I find this solution,but I can't post the link,as I didn't have 10+ posts... its in the site unlockr and there's an article about moto g unroot.
However I can't enable the usb debug,as the phone restart faster,than I'am able to do this.
Click to expand...
Click to collapse
My is rooted and cwm 6.0.4.6
May be we must do something with fastboot command
my GF's Moto G did the same thing, luckily it was a simple fix.
I had already rooted her stock 4.4.2 and installed CWM Recovery 6.0.4.6.
If you havent installed, CWM or TWRP, then I recommend to do so by fastboot command and the recovery.img.
Here is the forum link to install CWM Recovery for your Moto G:
http://forum.xda-developers.com/showthread.php?t=2563599
So I just Powered Off the phone. Then go back into the CWM Recovery by:
- hold down Volume Down and hold down Power Button for about 4-5 secs
- then let them go and you will see the Fastboot menu
- Press Volume Down (to highlight Recovery)
- then Press Volume Up (to select and go into Recovery, in this case the custom recovery)
- then just Wipe Cache and Wipe Dalvik Cache
- then Reboot Phone.
Done.
I think I will install CM11 for her and not have to deal with the stock ROM that gets official updates pushed onto it causing issues like this.
eyeoncomputers said:
my GF's Moto G did the same thing, luckily it was a simple fix.
I had already rooted her stock 4.4.2 and installed CWM Recovery 6.0.4.6.
So I just Powered Off the phone. Then go back into the CWM Recovery by:
- hold down Volume Down and hold down Power Button for about 4-5 secs
- then let them go and you will see the Recovery menu
- Press Volume Down (to highlight Recovery)
- then Press Volume Up (to select and go into Recovery, in this case the custom recovery)
- then just Wipe Cache and Wipe Dalvik Cache
- then Reboot Phone.
Done.
Click to expand...
Click to collapse
I see,however It's not possible on the phone. If I select the Recovery and I press volume up -> phone reboots
You mean this.
Download Stock image, extract.
Go to fastboot mode and flash following.
If you used Superboot method then use:
fastboot flash motoboot motoboot.img
Click to expand...
Click to collapse
if you used the modified recovery method:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Tussky said:
I see,however It's not possible on the phone. If I select the Recovery and I press volume up -> phone reboots
Click to expand...
Click to collapse
Thats strange.
eyeoncomputers said:
my GF's Moto G did the same thing, luckily it was a simple fix.
I had already rooted her stock 4.4.2 and installed CWM Recovery 6.0.4.6.
If you havent installed, CWM or TWRP, then I recommend to do so by fastboot command and the recovery.img.
The general command to install a custom recovery in Fastboot is:
fastboot flash recovery your_recovery_image.img
So I just Powered Off the phone. Then go back into the CWM Recovery by:
- hold down Volume Down and hold down Power Button for about 4-5 secs
- then let them go and you will see the Fastboot menu
- Press Volume Down (to highlight Recovery)
- then Press Volume Up (to select and go into Recovery, in this case the custom recovery)
- then just Wipe Cache and Wipe Dalvik Cache
- then Reboot Phone.
Done.
I think I will install CM11 for her and not have to deal with the stock ROM that gets official updates pushed onto it causing issues like this.
Click to expand...
Click to collapse
Thanks MAN! It works perfect!
mokkami said:
You mean this[/URL].
Download Stock image, extract.
Go to fastboot mode and flash following.
If you used Superboot method then use:
if you used the modified recovery method:
Thats strange.
Click to expand...
Click to collapse
Yes, I mean that,so if I follow this guide,then it will help ? I used the followin from modaco site -> Root your Moto G - option 1: Superboot
@kokonai OH? I thought unroot is essential?
I guess u used the modified recovery to root?
Tussky said:
Yes, I mean that,so if I follow this guide,then it will help ? I used the followin from modaco site -> Root your Moto G - option 1: Superboot
Click to expand...
Click to collapse
At the moment i am confused. But yeah i'm assuming it will work.
Cause if i understand it right, the superboot method is a modified kernel.
So you should flash motoboot.img.
There are several ways now. Either you flash cwm and wipe /cache as described above.
Or you flash motoboot and then , in my opinion, it should work.
mokkami said:
@kokonai OH? I thought unroot is essential?
I guess u used the modified recovery to root?
At the moment i am confused. But yeah i'm assuming it will work.
Cause if i understand it right, the superboot method is a modified kernel.
So you should flash motoboot.img.
There are several ways now. Either you flash cwm and wipe /cache as described above.
Or you flash motoboot and then , in my opinion, it should work.
Click to expand...
Click to collapse
I used the method to root the phone what is on that site,I followed that description and it worked. I'am not an expert in it,so I just followed PaulOBrien guide,so I can't answer for it for sure.
At this point I'am really desperate as the phone is completely useless, so I don't care even if I had data loss,as I can't access it anymore,nor save it to my PC.
In my knowledge, which seems not to be true anymore, the phone needs to be stock to install any update.
I am not talking about installed apps. It is more about system partition, recovery, kernel and so on.
I would try now to flash the motoboot.img and see what happens.
If this does not work i would flash cmw and try what was mentioned above.
Sure you can go completly stock. But in my view you are not that lost.
I'll stay with you
......but max 5 hours =)
mokkami said:
In my knowledge, which seems not to be true anymore, the phone needs to be stock to install any update.
I am not talking about installed apps. It is more about system partition, recovery, kernel and so on.
I would try now to flash the motoboot.img and see what happens.
If this does not work i would flash cmw and try what was mentioned above.
Sure you can go completly stock. But in my view you are not that lost.
I'll stay with you
......but max 5 hours =)
Click to expand...
Click to collapse
Thanks! However I can try it out only after 20 UTC.
However I have an idea,but maybe I'am wrong.
What happens if I try the chace wipe via in command line, I mean:
mfastboot erase cache
This should delete the cache right ? Shouldn't this command remove the problematic update file ?
Oh yeah this should be also an option.
But you'll come again to that point where you wanna install the update?!
mokkami said:
Oh yeah this should be also an option.
But you'll come again to that point where you wanna install the update?!
Click to expand...
Click to collapse
I want to give it a try. Yes,however I don't have to install the update. But I think I will flash a stock rom,make the update and then re-root the phone.
Thank you guys, I was going crazy with this rebooting problem. So now it is fixed, but how can I get the update? Noway?
mokkami said:
Oh yeah this should be also an option.
But you'll come again to that point where you wanna install the update?!
Click to expand...
Click to collapse
I was able to enable the usb debugging,and then to start the bootloader. However If I connected the phone and tried to execute the adb reboot-bootloader command it didn't worked. So I restarted the phone and entered into the bootloader,then I've done the following:
fastboot reboot-bootloader
fastboot erase cache
After the first command,the phone rebooted into bootloader,then the second command finally cleared the chace. Now my uptime is more then 8 minutes,so the phone is working great now
However I will do the complete process on the weekend,but not now as I'am really tired,but I will flash a stock rom at the weekend.
Possible solution...
Just started a thread with a possible solution
http://forum.xda-developers.com/showthread.php?t=2663205
Hope it helps...
l0l0l0 said:
still no custom rom for this device
Click to expand...
Click to collapse
History
At the first time i tried to build my own custom Rom Mixed with the Huawei P2 + Huawei P6. After installing my own rom my Huawei P2 system was death.
After i tryed a lot of hours to fix it but nothing helps.
All partitions were lost. I tryed to install the stock recovery and update the phone using Update.app. ( But didnt work)
i tryed really all things. but nothing works. Only one thing.
Step by Step Instruction:
Follow the instructions on your own risk
1- Download the B510 Update for the huawei P6 ""Download""
2- Download the Huawei Update extractor ""Download""
1. In Profiles Select Huawei P6
2. Choose the Update file that you have downloaded.
3. Mark
- system.img
- userdata.img
- cust.img
- boot.img
4. Right click on a market line and select "create flashable zip"
STEP 1-4 ""DOWNLOAD"" (This is the P6 Flashable Update.zip)
Big thanks to soyox :good::good:
3- Download this Openrecovery ""Download""
4- Download ADB And Fastboot ""Download""
5- Extraxt the Adb/Fastboot zip file In a folder
6- Copy the recovery.img in the same folder
7- Open the folder and press "shift" + "right-click" on a free place in the folder select "Open command window here"
8- Make shure Usb Debuging is enabled and connect your phone with the PC
9- type "adb reboot bootloader"
10- type "fastboot flash recovery recovery.img"
11- type "fastboot reboot"
12- during startup press "power" + vulume-up + volume-down" at same time and wait for the recovery
13- Select "wipe" "swipe to factory reset"
14- Select "wipe" "format data"
15- Select "advanced" "adb sideload" "swipe to start sideload"
16- move youre flashable zip into the same folder (like recovery.img)
17- Open command window (Step 7-)
18- type "adb sideload "your-zip-name".zip
19- now the install beginn and you have the P6 Firmware installed (Dont try to reboot your Phone it dosnt work)
20- Download Omni Rom and Gapps ""Homade Rom Download"" ""Stable Omni Rom 4,4,2 Download"" ""Gapps Download""
21- Firs install the Homade Version (same like step 1
22- now install the Stable Omni Rom 4,4,2 (same like step 1
23- wipe cache and dalvik
24- install Gapps (same like step 1
25- wipe cache and dalvik
26- Congratulation You Have now a Huawei P2 Phone with The Huawei P6 Firmware And Omni Custom Rom 4.4.2
Get Android 4.4.4
first install the version 4.4.3 ""Download""
after install the version 4.4.4 ""Download""
after install the 4.4.4 install the gapps from the same link done
Follow the instructions on your own risk
Please Give me a feadback if it work.:good:
Say thanks If it work :good:
Knowed Issue:
Phonespeaker works only after plugin a headset and unplug.....
mabe no signal i have signal on my phone but som other didnt have signal
UKW Radio dont work
skjd
when open huawei extractor says "invalid file" help.
Unzup the zip file.
soyox said:
when open huawei extractor says "invalid file" help.
Click to expand...
Click to collapse
Befor select the file unzip it. Make shuer you open a file wiht the ending .app (ex: UPDATE.APP
azsdf
davide_94 said:
Befor select the file unzip it. Make shuer you open a file wiht the ending .app (ex: UPDATE.APP
Click to expand...
Click to collapse
this is what i downloaded and when i select that update.app do not appers system.img look.
soyox said:
this is what i downloaded and when i select that update.app do not appers system.img look.
Click to expand...
Click to collapse
Im really sorry about this wrong link. This Pack should be work.
""Download""
12321
i've try everything and omni get into bootloop. :c and that recovery you post dont work very well.
soyox said:
i've try everything and omni get into bootloop. :c and that recovery you post dont work very well.
Click to expand...
Click to collapse
but after installing the custom rom yo got bootloop. try to boot into the recovery for the custom rom.
volume-up + volume-down + power
do a factory reset. and wipe all partitions. and try to install again.
I made this tutorial after i got the sucess and losed all files that i had used because my pc crashed.. but i think the files should work.
51
davide_94 said:
but after installing the custom rom yo got bootloop. try to boot into the recovery for the custom rom.
volume-up + volume-down + power
do a factory reset. and wipe all partitions. and try to install again.
I made this tutorial after i got the sucess and losed all files that i had used because my pc crashed.. but i think the files should work.
Click to expand...
Click to collapse
got it working, but the radio or signal its gone... :c
soyox said:
got it working, but the radio or signal its gone... :c
Click to expand...
Click to collapse
i under stand it right. you have install it sucesfull?
The radio dont work. on this rom but comming soon.. it will bi fixed from the Omni rom Developer.
now i have install sucessfully the 4.4.3 and the 4.4.4 i attach the links to the thread.
if your rom work pls post some screenshots..
asd
davide_94 said:
i under stand it right. you have install it sucesfull?
The radio dont work. on this rom but comming soon.. it will bi fixed from the Omni rom Developer.
now i have install sucessfully the 4.4.3 and the 4.4.4 i attach the links to the thread.
if your rom work pls post some screenshots..
Click to expand...
Click to collapse
you should add that detail to the post. without signal im going back to stock?. but AWESOME job dude.
soyox said:
you should add that detail to the post. without signal im going back to stock?. but AWESOME job dude.
Click to expand...
Click to collapse
did you tryed the 4.4.4 mabe you got signal there.
and yes i update the information.
And thx
davide_94 said:
did you tryed the 4.4.4 mabe you got signal there.
and yes i update the information.
And thx
Click to expand...
Click to collapse
nothing...
soyox said:
nothing...
Click to expand...
Click to collapse
Okk Thanks for trying. I contacted the Omni developers to fix this Problems. Mabe thy can Help me
davide_94 said:
Okk Thanks for trying. I contacted the Omni developers to fix this Problems. Mabe thy can Help me
Click to expand...
Click to collapse
Ok, I'll be checking your post.
I tried flashing the recovery.img (openrecovery) but my phone doesn't want to go into the recovery.. am I doing something wrong? i'm following instruction by instruction but I just cant seem to get it working. it flashes okay but I can't access it to wipe the data on my phone
jdcrispe95 said:
I tried flashing the recovery.img (openrecovery) but my phone doesn't want to go into the recovery.. am I doing something wrong? i'm following instruction by instruction but I just cant seem to get it working. it flashes okay but I can't access it to wipe the data on my phone
Click to expand...
Click to collapse
if you dont have a unlocked Bootloader unlock it first.. and try again
Unlock
davide_94 said:
if you dont have a unlocked Bootloader unlock it first.. and try again
Unlock
Click to expand...
Click to collapse
http://prntscr.com/49k4at I tried to unlock the bootloader then flash the recovery, still gets stuck on the "Huawei Ascend" screen I really need 4.4
jdcrispe95 said:
http://prntscr.com/49k4at I tried to unlock the bootloader then flash the recovery, still gets stuck on the "Huawei Ascend" screen I really need 4.4
Click to expand...
Click to collapse
if you stuck on the huawei screen Press for long time the power button during the reboot press the hotkeys for recovery. (See tutorial)
davide_94 said:
if you stuck on the huawei screen Press for long time the power button during the reboot press the hotkeys for recovery. (See tutorial)
Click to expand...
Click to collapse
After flashing the broken openrecovery you gave, i have to go back into the boot loader and flash recovery_twrp.img (a recovery that works for me).. so I flashed the zip I created through the huawei update extractor, then tried to flash the homemade zip too, but it failed, so i rebooted and went back into the TWRP recovery, now it's asking for a password. (which I assume is set by Android 4.4, since I haven't set any password).. so I can't continue using this recovery, I need to get the recovery you gave me to work.
that's my current issue.
Any support would be appreciated
Spirit Free
Does spirit free radio work?
Hello everyone,
Lately I've changed my rom from to another (both of them are custom). The problem is when I try to reboot my phone into recovery (TWRP) but instead it reboots into bootloader.
Re3xth said:
Hello everyone,
Lately I've changed my rom from to another (both of them are custom). The problem is when I try to reboot my phone into recovery (TWRP) but instead it reboots into bootloader.
Click to expand...
Click to collapse
How did you try to reboot into recovery? Sorry for such stupid question but you might using wrong commands or key combinations that's why I wanna know the detail info for further support
LinhBT said:
How did you try to reboot into recovery? Sorry for such stupid question but you might using wrong commands or key combinations that's why I wanna know the detail info for further support
Click to expand...
Click to collapse
I have an advanced menu in the rom where I can choose if I want to reboot into recovery, system or boot loader, so I choose recovery but the phone reboots in bootloader. Even if I just pressed the power button and volume up it also go to the bootloader
Re3xth said:
I have an advanced menu in the rom where I can choose if I want to reboot into recovery, system or boot loader, so I choose recovery but the phone reboots in bootloader. Even if I just pressed the power button and volume up it also go to the bootloader
Click to expand...
Click to collapse
Please be specific the information :
1. Which ROM r u in?
2. Before this happen, which Recovery r u in?
3. Did you try to boot into recovery by adb command : adb reboot recovery ?
1. I'm currently using Arrow os.
2. TWRP.
3.Yes I did because there's no other way you can get into the recovery but using adb only gives me access to TWRP, but the problem is that every rime I want to access TWRP I should use a computer.
Re3xth said:
1. I'm currently using Arrow os.
2. TWRP.
3.Yes I did because there's no other way you can get into the recovery but using adb only gives me access to TWRP, but the problem is that every rime I want to access TWRP I should use a computer.
Click to expand...
Click to collapse
Means you still able to boot into recovery, just that u must use command lines and the recovery's not there when u try to boot into it by other method, correct?
If so, download OF latest build R11.1.2.1 ( zip file ) boot into TWRP, flash the zip, boot info OF, flash the zip in OF again, then let it do the auto reboot into recovery. When done, clear cache, Dalvik then reboot to system as normal.
Then try to reboot to recovery by normal ways, inform me back if it's work
Thank you for your reply. I will try to do it after some time because I'm busy right now hopefully it works