Database Info

TL-10 no OS

Hi guys..hope somebody can help me to get my phone working again..i had lollipop installed and by accident I deleted the internal memory..the only thing what I can is to reboot to recovery twrp..and then on my pc phone shows up..1 cust drive and 1 internal..which is empty..do you have any idea about that? thanks a lot..please help )))

Download the stock rom for your phone model (tl-10) official one, NOT beta version, better directly from Huawei web site.
Extract stock recovery from downloaded file (by using huawei extractor app).
Using ADB commands, flash stock recovery. Then copy stock rom to sdcard and proceede with 3button procedure.
If any of these operations sound new to you, please use "search" button in these forums.

tuddu said:
Download the stock rom for your phone model (tl-10) official one, NOT beta version, better directly from Huawei web site.
Extract stock recovery from downloaded file (by using huawei extractor app).
Using ADB commands, flash stock recovery. Then copy stock rom to sdcard and proceede with 3button procedure.
If any of these operations sound new to you, please use "search" button in these forums.
Click to expand...
Click to collapse
I have downloaded from Huawei web site 120sp04 firmware. I extracted recovery, flashed with adb commands. Copied the stock rom to sd card, and i am not able to force my phone to start update. keeps restarting. is the a special trick for this 3 button procedure? phone should be off, but from bootloader i cannot switch of the phone. Is it possible that the phone doesn't recognize my SD Card? please advise.

Please check, there' s a command trough ADB (I think adb reboot) wich reboot phone.
Then, someone, has been forced to keep the SD card NOT inserted into the phone, waited for reboot and then (after huawei logo I think, but I'm not sure; please check) inserted the SD card.
Then proceede with local update (forced method).
As for the 3button method, simply press and keep pressed volume up+volume down + power on button. All togheter.
Then the phone must boot automatically into recovery and start the procedure itself.
It i clear: stock recovery MUST be already installed !!!

tuddu said:
Please check, there' s a command trough ADB (I think adb reboot) wich reboot phone.
Then, someone, has been forced to keep the SD card NOT inserted into the phone, waited for reboot and then (after huawei logo I think, but I'm not sure; please check) inserted the SD card.
Then proceede with local update (forced method).
As for the 3button method, simply press and keep pressed volume up+volume down + power on button. All togheter.
Then the phone must boot automatically into recovery and start the procedure itself.
It i clear: stock recovery MUST be already installed !!!
Click to expand...
Click to collapse
The only thing what i can do is, to flash recovery and boot from fastboot.zip( http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888 ) i guess for L09 version, where i can get to update mode with 3 buttons...all other possibilities are not possible. even if i extract from original firmware recovery and boot images, nothing work..i was going from B125 back to B123 to B128 and B313 when in TWRP i deleted everything. Phone is charging, i can turn it off..OS is missing..is it possible that somebody would make a back up in twrp and i would flash it on my phone? or what version of firmware i should start with? what about sideload? does it help? please advise.

alworth said:
The only thing what i can do is, to flash recovery and boot from fastboot.zip( http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888 ) i guess for L09 version, where i can get to update mode with 3 buttons...all other possibilities are not possible. even if i extract from original firmware recovery and boot images, nothing work..i was going from B125 back to B123 to B128 and B313 when in TWRP i deleted everything. Phone is charging, i can turn it off..OS is missing..is it possible that somebody would make a back up in twrp and i would flash it on my phone? or what version of firmware i should start with? what about sideload? does it help? please advise.
Click to expand...
Click to collapse
Hello!
I have similar problems, but i have the L09.
Check if you can mount system. Or if you can wipe system, because i can't
Good luck!

[HELP] HONOR 6 - Bricked - B803

Dears
for 48 hours im trying to find any way to unbrick my Honor 6 H60 - L04 phone.
I have had Android M 6.0 B803 upgrade package over B550, then unlocked my boot loader and tried to Root my phone with MultiTool.
went through all steps
and
Suddenly my phone rebooted and stuck on "Honor" powered by android.
Tried so many solutions but no use.
the very weird issue, that the phone isn't responding when i press the 3 (Vol +,- & power) buttons unless i remove the SD Card.
is there any one could help pls....?

shiko0o said:
Dears
for 48 hours im trying to find any way to unbrick my Honor 6 H60 - L04 phone. ...... ...... .......
hi . if you are unlocked bootloader flash twrp over multiboot adn download b804 twrp backup and restore it . :good:
Click to expand...
Click to collapse

i used the mentioned tutorial of unbricking Honor 6 but unfortunately with no hope, so that am now on Emui 3.0 b370 which isn't able to boot into recovery even
where can i download twrp b804 backup pls?

Till i got a reply by someone.
i will go through some steps of my mind.
i will multitool unbrick option to load B550, then will use B803 update zipped file to upgrade by copying to root folder into dload.

shiko0o said:
i used the mentioned tutorial of unbricking Honor 6 but unfortunately with no hope, so that am now on Emui 3.0 b370 which isn't able to boot into recovery even
where can i download twrp b804 backup pls?
Click to expand...
Click to collapse
Try this procedure, with USB cable disconnected
Download rollback:
https://mega.nz/#F!HVYRzDQJ!IPeiyJeJyWYXhP7Fl3LHjQ
Extract rollback
Copy update.app in SD / dload
Press Power to turn off
When you feel the vibration
Press 3btn and when it appears Honor logo connect the SD and after 4 - 5 seconds stop pressing the buttons
Try more times if it does not work right away
If rollback is installed, repeat the same procedure with update.app B550
https://yadi.sk/d/3iVrW3fwmTdDj
There is also this guide but do not know if it works well
http://pantomath.xyz/how-to-unbrick-honor-6-from-android-m/
This is a CWM Backup B803, must be put in the SD folder clockworkmod/backup
https://mega.nz/#!adYwhRKI!2cSUEQYOJu_BVIFwKpA30TV3ptfsDEyx6iARlfzLhZg
Backup TWRP B804 in SD/TWRP/BACKUPS
https://yadi.sk/d/3htR59aHmy6Mn

panamera2011 said:
Try this procedure, with USB cable disconnected
Download rollback:
https://mega.nz/#F!HVYRzDQJ!IPeiyJeJyWYXhP7Fl3LHjQ
Extract rollback
Copy update.app in SD / dload
Press Power to turn off
When you feel the vibration
Press 3btn and when it appears Honor logo connect the SD and after 4 - 5 seconds stop pressing the buttons
Try more times if it does not work right away
If rollback is installed, repeat the same procedure with update.app B550
https://yadi.sk/d/3iVrW3fwmTdDj
There is also this guide but do not know if it works well
http://pantomath.xyz/how-to-unbrick-honor-6-from-android-m/
This is a CWM Backup B803, must be put in the SD folder clockworkmod/backup
https://mega.nz/#!adYwhRKI!2cSUEQYOJu_BVIFwKpA30TV3ptfsDEyx6iARlfzLhZg
Backup TWRP B804 in SD/TWRP/BACKUPS
https://yadi.sk/d/3htR59aHmy6Mn
Click to expand...
Click to collapse
Thanks mate for your richy reply
i will try TWRP backup which is easier for me and revert,,,
UPDATE :
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS, YOU MADE MY DAYYYYYYYYYYYYYYYYYYYYYYY
APPRECIATE YOUR HELP AND REPLY SO MUCHHHHHHHHHHHHHHHHHHHHHHHHHHHH
TWRP Backup, Resolved the issue like a magic.
Thank you so much again

ebilili , after this procedure , did you get back to Emui 3.0?

adhamamar said:
ebilili , after this procedure , did you get back to Emui 3.0?
Click to expand...
Click to collapse
no . rollback fails .i test all ways for rollback . all fails at 36% in update . i could not downgrade to 3.1 . ( sorry for my bad english )

I tried first method but get error installing update :7

panamera2011 said:
Try this procedure, with USB cable disconnected
Download rollback:
https://mega.nz/#F!HVYRzDQJ!IPeiyJeJyWYXhP7Fl3LHjQ
Extract rollback
Copy update.app in SD / dload
Press Power to turn off
When you feel the vibration
Press 3btn and when it appears Honor logo connect the SD and after 4 - 5 seconds stop pressing the buttons
Try more times if it does not work right away
If rollback is installed, repeat the same procedure with update.app B550
https://yadi.sk/d/3iVrW3fwmTdDj
There is also this guide but do not know if it works well
http://pantomath.xyz/how-to-unbrick-honor-6-from-android-m/
This is a CWM Backup B803, must be put in the SD folder clockworkmod/backup
https://mega.nz/#!adYwhRKI!2cSUEQYOJu_BVIFwKpA30TV3ptfsDEyx6iARlfzLhZg
Backup TWRP B804 in SD/TWRP/BACKUPS
https://yadi.sk/d/3htR59aHmy6Mn
Click to expand...
Click to collapse
can you use the same rollback for B807?and/or is it possible to downgrade to any lollipop build with TWRP or CWM backups?

I have kinda simillar problem like shiko's
my phone was on B803,
i installed B804 OTA twice but it didn't work (it still showed B803)
so i extracted B550 UPDATE.APP to downgrade and flashed it via fastboot
and my phone has restart loop, i installed twrp and took backup
now i'm here since 17 hours of doing all that could help...
i tried all mentioned up methods but in panamera's solution download mode stuck on 5% or fails in 36%, and in linked method the same.
after doing restore via twrp it seems like working showing normal boot logo and animation from Lollipop, but it hang on boot animation.
sorry for my bad english
please help mates i'm really confused
EDIT. unbricked! Protip: charge your battery to at least 50% haha

i just Downgraded from B810 to B550
1- We need to use a clean B810 (or i think any of this H60-L04C675B8007
H60-L04C675B8006
H60-L04C675B8010
H60-L04C675B8004
H60-L04C675B8003
H60-L04C151B8002
H60-L04C151B8001) it is in VERLIST.img inside UPDATE.APP
2- We need to use boot.IMG B803 - Recovery.IMG B803
3- Use the downgraded package https://drive.google.com/file/d/0ByJkSOohdNz_NWtGclJmVTYtZUk/view?pref=2&pli=1
4- Use full room B550
(and may be this done because i Change location to (hw/normal) first) this link https://www.youtube.com/watch?v=36L-...ature=youtu.be

adhamamar said:
i just Downgraded from B810 to B550
1- We need to use a clean B810 (or i think any of this H60-L04C675B8007
H60-L04C675B8006
H60-L04C675B8010
H60-L04C675B8004
H60-L04C675B8003
H60-L04C151B8002
H60-L04C151B8001) it is in VERLIST.img inside UPDATE.APP
2- We need to use boot.IMG B803 - Recovery.IMG B803
3- Use the downgraded package https://drive.google.com/file/d/0ByJkSOohdNz_NWtGclJmVTYtZUk/view?pref=2&pli=1
4- Use full room B550
(and may be this done because i Change location to (hw/normal) first) this link https://www.youtube.com/watch?v=36L-...ature=youtu.be
Click to expand...
Click to collapse
I have changed my custom.bin by "hw/eu" at "hw/normal" ; But Instal failed when i try with rollback... :crying:

Steve Giordano said:
I have changed my custom.bin by "hw/eu" at "hw/normal" ; But Instal failed when i try with rollback... :crying:
Click to expand...
Click to collapse
if your phone rooted use this files https://mega.nz/#F!K9wDWRKb
decryption key
!Bj0-D0UXFzNLGEytUDSXxA
put custom.bin in (data/custom.bin) and Accept overwritten , and put oeminfo in (dev/block/platform/hi_mci.0/by-name)and Accept overwritten and restart to twrp recovery do fix permission and restart phone (and check if not change back to stock recovery and reset factory and check again)

adhamamar said:
if your phone rooted use this files https://mega.nz/#F!K9wDWRKb
decryption key
!Bj0-D0UXFzNLGEytUDSXxA
put custom.bin in (data/custom.bin) and Accept overwritten , and put oeminfo in (dev/block/platform/hi_mci.0/by-name)and Accept overwritten and restart to twrp recovery do fix permission and restart phone (and check if not change back to stock recovery and reset factory and check again)
Click to expand...
Click to collapse
nothing.. installation failed...

shiko0o said:
Dears
for 48 hours im trying to find any way to unbrick my Honor 6 H60 - L04 phone.
I have had Android M 6.0 B803 upgrade package over B550, then unlocked my boot loader and tried to Root my phone with MultiTool.
went through all steps
and
Suddenly my phone rebooted and stuck on "Honor" powered by android.
Tried so many solutions but no use.
the very weird issue, that the phone isn't responding when i press the 3 (Vol +,- & power) buttons unless i remove the SD Card.
is there any one could help pls....?
Click to expand...
Click to collapse
I followed panamera2011's advice on this thread and was sucessful
http://forum.xda-developers.com/honor-6/general/help-honor-6-bricked-b803-t3309599

honor 6 bootloop

Guys i installed the ota update yesterday and iam stuck with bootloop. my device has a locked bootloader and for getting unlock code i need product id which needs the device to be up and working. Iam confused what to do.... Also i tried rolling back but its stuck at 5% wid usb symbol and no success please respond ASAP:crying::crying::crying::crying::crying::crying:

I guess you ve tried to flash wrong version of the rom. Any way what you have to do is just to find the right original rom and flash it back... If this is still not working a unlock bootloader will allow you to flash TWRP and then restore a twrp backup which will restore your phone. Till you have the Fastboot mode (press vol- + power) you can restore your phone. Also no need to be root to make some change TWRP would allow you any change like dpi setting or multi windows enabling.
Please keep posted if this was helpfull or if you need more....

:crying::crying::crying::crying:
booffy said:
I guess you ve tried to flash wrong version of the rom. Any way what you have to do is just to find the right original rom and flash it back... If this is still not working a unlock bootloader will allow you to flash TWRP and then restore a twrp backup which will restore your phone. Till you have the Fastboot mode (press vol- + power) you can restore your phone. Also no need to be root to make some change TWRP would allow you any change like dpi setting or multi windows enabling.
Please keep posted if this was helpfull or if you need more....
Click to expand...
Click to collapse
i cant unlock boot loader, because my phone is on boot loop and i have not my product id to unlock
i use rom from this link and http://forum.xda-developers.com/honor-6/general/emui-4-0-download-honor-6-l04-b803-t3290927
my mistack is copy updat.app form b803 ota package to dload and update!
plz help me:crying:

[SOLVED] H60-L02 bricked beyond recovery? Plz help me!

edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)

mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.

With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!

mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.

Thx. I will give it a try when I'm back from work.
I let you know if it is working.

mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice

Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike

mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.

Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.

mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.

It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike

The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.

igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?

error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.

igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.

Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..

igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.

zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse

i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!

mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"

[RECOVERY][BOOT][ROOT][VFD-1400] Vodafone Prime Tab 7

DISCLAIMER: I WILL NOT BE HELD LIABLE FOR ANY DAMAGE TO YOUR DEVICE BY USING THIS METHOD
Warning: this will only work with the older firmware (Android 6.0.1/1BEBFDB1 )
What this will achieve:
You will flash a modified boot image that runs selinux in permissive mode.
You will flash a custom recovery that allows you to root the device.
After you are done, your userdata will most likely not be encrypted anymore. You can re-enable encryption in the system settings.
DOWNLOAD
1. Install the usb drivers that come with the device, in /system/etc/USBDriver.iso.
They are also in the download package, in USBDriver/.
Run Setup.vbs.
Also install SUGAR QCT_SP v11.1.2 Setup.exe from the download package.
2. Connect your device to your computer and boot it into EDL mode (enable usb debugging).
adb.exe reboot edl
3. Run SUGAR QCT_SP (use credentials from download package), select VF1400 device and click on the upgrade button.
It will download the latest official firmware update into "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\bin\VF1400-2AVXXXX" (VF1400-2AVDDE1, for me).
After the download is done and the flashing started, make a copy of the VF1400-2AVXXXX folder to your Desktop.
4. While the flashing is going on, we can start to modify out copy of VF1400-2AVXXXX.
In it should be a folder, most likely called 1BEBFDB1 (version number of the update).
Inside that folder should be the .mbn files we care about: B1BEB0B0CD00.mbn (boot image) and R1BEB0B0CD00.mbn (recovery image).
Possibly they will be called differently, but I assume the boot image always starts with B and the recovery with R.
You can check "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\tool\logs\Sugar_XXXXXXXX.log" to make sure which file is which.
Replace B1BEB0B0CD00.mbn with boot.img from the download and R1BEB0B0CD00.mbn with recovery.img.
5. After the flash is done and the device rebooted, put it in edl mode again (after enabling usb debugging).
adb.exe reboot edl
6. Now, *before* we start SUGAR QCT_SP again, copy the VF1400-2AVXXXX into "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\bin"
7. Start SUGAR QCT_SP, select VF1400 device and hit upgrade.
Congratulations! After flashing and after the next reboot you are running with selinux in permissive mode and you can flash SuperSU from the recovery.
Now copy the latest SuperSU flashable zip into your internal storage and install it from recovery.
The recovery used is CM-13.0, device tree based on https://github.com/zwliew/android_device_xiaomi_land
Being compiled with prebuilt kernel from boot.img.

Works great! Thank you

Cool! Thanks alot!

Hi fused#1,
thanks for this, have you tried to install Xposed on this device after rooting it?
Best regards,
misterfx

Hi,
i've now tested and installed xposed.
You need this files: xposed-v87-sdk23-arm.zip, XposedInstaller_3.1.1.apk and for safety the xposed-uninstaller-20160829-arm.zip.
Install the xposed-v87-sdk23-arm.zip with recovery, after reboot install the XposedInstaller_3.1.1.apk.
Best wishes,
misterfx

TWRP recovery
Hello.
All work as expected, thanks a lot for that.
I wonder if someone have manage to install TWRP recovery.
I mainly interesting of NANDroid Backup i can take with TWRP recovery.
How can i do that?
Thanks at advance.

Hello,
is there any way to get ntfs oder exfat support on the vodafone tab prime 7 ?
at the moment, it is original, without rom changes.

Hi, I tried your guide today, but it failed at flashing the alternative bootloader and recovery. System was not able to boot anymore after flashing the second time with your altered files.
Display only showed "powered by android" and nothing else happened. Luckily I found out that you are able to switch back into EDL mode when this happens:
- Shut down device (disconnect any cable and press power until display switches off)
- Press Vol+ AND Vol- for about 10 seconds and then insert USB cable
-> "powered by android" label flashes up and then display goes black and voila you are in EDL mode again
---------------------
Here comes my question:
Is it possible that your bootloader and/or recovery are incompatible with latest FW version? Could you have a look at the current bootloader and recovery to get selinux in permissive mode again? I attached the original bootloader and recovery that was downloaded with SUGAR QCT_SP.

Hi,
quite possible.
I wasn't even aware of the new firmware version. Obviously this only works with the old firmware. I will make that clear in the original post.
What firmware/android version is it? Maybe I'll look into that today or tomorrow.
Cheers
edit: I'm not even being offered the new firmware. Can you upload all of it somewhere?
gandharva said:
Hi, I tried your guide today, but it failed at flashing the alternative bootloader and recovery. System was not able to boot anymore after flashing the second time with your altered files.
Display only showed "powered by android" and nothing else happened. Luckily I found out that you are able to switch back into EDL mode when this happens:
- Shut down device (disconnect any cable and press power until display switches off)
- Press Vol+ AND Vol- for about 10 seconds and then insert USB cable
-> "powered by android" label flashes up and then display goes black and voila you are in EDL mode again
---------------------
Here comes my question:
Is it possible that your bootloader and/or recovery are incompatible with latest FW version? Could you have a look at the current bootloader and recovery to get selinux in permissive mode again? I attached the original bootloader and recovery that was downloaded with SUGAR QCT_SP.
Click to expand...
Click to collapse

Hi,
it seems there is again a new fw, files named like R1BEJ0J0CD00.mbn, with security patch level of April 2017. A user flashed this with the root-patch, but he has no wifi anymore.
Thanks for a update
Best wishes,
MrFX

The procedure works, but I can not install from Supersu.zip recovery mode. I tried many versions but I always get this error:
E:filed to veryfy whole-file signature
E:signature verification failed
Istallation aborted.
Can someone help me

Hey @fused#1 , i have a problem. after flashing and rooting my wifi does not work. do you know why?

x.0ldB0y.x said:
Hey @fused#1 , i have a problem. after flashing and rooting my wifi does not work. do you know why?
Click to expand...
Click to collapse
I don't think this is compatible with the latest update for the device. If you are running thatthat could be the reason. It's possible they updated the radio firmware or whatever the **** it's called these days...

Hi fused#1,
have you a hint, i've now a 2nd device with the old fw (and saved old firmware files), but sugar_qct always do a update and downloads the new firmware... is it possible to flash the old, saved files?
Update: got it, renamed all old fw files to the new names, copied they to the new created directory (replaced new fw), and sugar_qct installed the old fw with the new file names.
Thanks,
MrFX

Hey misterfx,
can u do an tutorial, how u did it to flash the old fw?
I tryed many things but he doesnt accept the old files (and i dont know the new folder-name).
Would help many guys i think, thanks ^^

Hi,
you can download the new fw with sugar_qct (but while downloading, unplug the tab)... you now have the new folder name and the files inside it.
Rename ALL old firmware files (from backup) to the new names and copy they to the new fw folder and replace all files.
Then exit sugar_qct and start it again, it will find the "new" files... make upgrade.
Good luck,
MrFX
Neeschar said:
Hey misterfx,
can u do an tutorial, how u did it to flash the old fw?
I tryed many things but he doesnt accept the old files (and i dont know the new folder-name).
Would help many guys i think, thanks ^^
Click to expand...
Click to collapse

df
thank you

TWRP
Someone can find TWRP for VFD1400?

Vdf 1400 Old firmware
Would someone please upload the vdf1400 old firmware before the update of April 2017!!
I would like to install that Rom instead..
WiFi is not working while using this method for the new firmware..
Thanks

Vdf 1400 Old firmware
Anyone has a link for the old firmware VF1400-2AVDDE1 ....
Thanks in advance