Database Info

I terrible bricked my Honor. Fastboot not working. Need help.

Hi I install one application (host name changer) and restart the phone and it stop working. Stops at HONOR screen. I enter to bootloader, open multi-tool and change recovery. Unfortunately bootloader not eorking ok, because when I wanted to upload IMG files to unbrick the phone, I get the error in Multi-tool. I decided to format/clean all data (I use CWM recovery and later also TWRP recovery). Again uploaded stock recovery and try use 3 buttons. Unfortunately installation start and after one second failed.
I also try to use QTADB to upload updata.apk but it not working - there is problem with bootloader. Also Minimal ADB not working - doesn't see Honor.
How can I upload / install rom now?
Is it possible instal ROM from external SD card? I try but on external card (using CWM) I see no files?

You can't use other recovery than the stock one to use 3 buttons. If the phone is not recognized by adb I'm not sure if you can restore it.

I used 3 buttons with stock recovery, and installation failed.

Did you replaced build.prop and local.prop with the original ones before 3 buttons?
Las night installed B310 without any problems.

I did not replace build.prop and local.prop because I install some other app which - I guess - modify build.prop and this is why I have that problems. Afert I reboot phone it brick on HONOR loco and Minimal ADB do not response. When I connect USB cable and enter to bootloader the PC see the phone, Hisuite start but can not connect. So I have problem with bootloader - it does not response using Minimal ADB. Onlu Multitool lets me change recovery. All I can do now is enter to recovery, bootloader, change recovery (only with Multitool), start install ROM (using 3 buttons) but it failed immediately.

Try to install stock dev rom 4.x.x
4.x.x roms have not prop checker so you can install them via 3btns

But how to upload this rom to HH? All I can do is using Minimal adb (not all function, but sometime I can use pull and push functions);

[email protected] said:
But how to upload this rom to HH? All I can do is using Minimal adb (not all function, but sometime I can use pull and push functions);
Click to expand...
Click to collapse
Put it on a SD Card?
If you can enter fastboot and your bootloader is unlocked you can try to flash the system.img via fastboot. But since you have CWM it shoul be unlocked

Finally the Multi-tool stoped responding (I couldn't upload img files to unbrick - there was an error).
But suddenly the Minimal ADB started responding, and I uploaded build.prop and after that I flash recovery.img, system.img, boot.img and cust.img.
Thanks for help.

The following is irrelevant. Just to share.
I messed up honor 6 plus once. It booted then it permanently hanged. Black screen, home launcher does not respond, no navigation bar. Power button worked with the options to reboot and power down.
Before I messed it up, I have unlocked the boot loader and flashed cwm and rooted by install zip.
I tried to fix it by cwm wipe data, wipe cache, wipe dalvik but that did not help.
Later I found that I was able to boot into fastboot mode and managed flashing back stock recovery. Then I downloaded a full stock ROM, decompressed the dload and copied it to root of a sdcard. Then I applied three finger update. It worked and fixed the problem.

HmMarques said:
Did you replaced build.prop and local.prop with the original ones before 3 buttons?
Las night installed B310 without any problems.
Click to expand...
Click to collapse
What are build.prop and local.prop ? Where to replace it ? How to get these type of file ?
Please help me my Honor 6 H60 L02 is bricked and I cant understand anything..

Devandrogeek said:
What are build.prop and local.prop ? Where to replace it ? How to get these type of file ?
Please help me my Honor 6 H60 L02 is bricked and I cant understand anything..
Click to expand...
Click to collapse
Read this thread carefully: http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180
There you have all information.
Search here for your buil.prop and local.prop : https://www.mediafire.com/folder/o3tgl8z4u21dz/STOCK_build.prop_&_local.prop

HmMarques said:
Read this thread carefully: http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180
There you have all information.
Search here for your buil.prop and local.prop : https://www.mediafire.com/folder/o3tgl8z4u21dz/STOCK_build.prop_&_local.prop
Click to expand...
Click to collapse
Actually my question was, how to get a stock recovery and how to set permissions ?

Devandrogeek said:
Actually my question was, how to get a stock recovery and how to set permissions ?
Click to expand...
Click to collapse
Well to set permissions you must use either root explorer or ES filexplorer, personally I use the last one with root privileges on.
after you move the files to correspondent folder you need to click on it for a few seconds and then go to properties/permissions and check only left column all 3 and middle column the first from above.
As for stock recovery go to the thread of Honor multi-tool, there you have how to and were to download stock recovery.
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060

HELP HELP HELP!!! Please!!! I cant put my Honor in fastmode!!! I tried to put cwm in Marshmallow 6.0 and bricked!!! I was able to use but I did a factory reset and it just dont pass the honor screen at the beginnin!!! Please Somebudy help!!! Sorry for my bad english!!!

Hi all, bricked my honor 6 plus firmware b133 after updating it with OTA b334 to b503 (marshmallow 6.0) RU.zip
Now after powering on there is bootlogo only for a second, and black screen after with flashing led lights with green and red.
Can't enter to recovery mode, only fastboot mode is available when connecting to pc.
Can flash without errors all files from fastboot: system.img, recovery.img, cust.img, boot.img but it can't help to fix phone
Will buy you some beer for successful solution
Thank you

TL-10 no OS

Hi guys..hope somebody can help me to get my phone working again..i had lollipop installed and by accident I deleted the internal memory..the only thing what I can is to reboot to recovery twrp..and then on my pc phone shows up..1 cust drive and 1 internal..which is empty..do you have any idea about that? thanks a lot..please help )))

Download the stock rom for your phone model (tl-10) official one, NOT beta version, better directly from Huawei web site.
Extract stock recovery from downloaded file (by using huawei extractor app).
Using ADB commands, flash stock recovery. Then copy stock rom to sdcard and proceede with 3button procedure.
If any of these operations sound new to you, please use "search" button in these forums.

tuddu said:
Download the stock rom for your phone model (tl-10) official one, NOT beta version, better directly from Huawei web site.
Extract stock recovery from downloaded file (by using huawei extractor app).
Using ADB commands, flash stock recovery. Then copy stock rom to sdcard and proceede with 3button procedure.
If any of these operations sound new to you, please use "search" button in these forums.
Click to expand...
Click to collapse
I have downloaded from Huawei web site 120sp04 firmware. I extracted recovery, flashed with adb commands. Copied the stock rom to sd card, and i am not able to force my phone to start update. keeps restarting. is the a special trick for this 3 button procedure? phone should be off, but from bootloader i cannot switch of the phone. Is it possible that the phone doesn't recognize my SD Card? please advise.

Please check, there' s a command trough ADB (I think adb reboot) wich reboot phone.
Then, someone, has been forced to keep the SD card NOT inserted into the phone, waited for reboot and then (after huawei logo I think, but I'm not sure; please check) inserted the SD card.
Then proceede with local update (forced method).
As for the 3button method, simply press and keep pressed volume up+volume down + power on button. All togheter.
Then the phone must boot automatically into recovery and start the procedure itself.
It i clear: stock recovery MUST be already installed !!!

tuddu said:
Please check, there' s a command trough ADB (I think adb reboot) wich reboot phone.
Then, someone, has been forced to keep the SD card NOT inserted into the phone, waited for reboot and then (after huawei logo I think, but I'm not sure; please check) inserted the SD card.
Then proceede with local update (forced method).
As for the 3button method, simply press and keep pressed volume up+volume down + power on button. All togheter.
Then the phone must boot automatically into recovery and start the procedure itself.
It i clear: stock recovery MUST be already installed !!!
Click to expand...
Click to collapse
The only thing what i can do is, to flash recovery and boot from fastboot.zip( http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888 ) i guess for L09 version, where i can get to update mode with 3 buttons...all other possibilities are not possible. even if i extract from original firmware recovery and boot images, nothing work..i was going from B125 back to B123 to B128 and B313 when in TWRP i deleted everything. Phone is charging, i can turn it off..OS is missing..is it possible that somebody would make a back up in twrp and i would flash it on my phone? or what version of firmware i should start with? what about sideload? does it help? please advise.

alworth said:
The only thing what i can do is, to flash recovery and boot from fastboot.zip( http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888 ) i guess for L09 version, where i can get to update mode with 3 buttons...all other possibilities are not possible. even if i extract from original firmware recovery and boot images, nothing work..i was going from B125 back to B123 to B128 and B313 when in TWRP i deleted everything. Phone is charging, i can turn it off..OS is missing..is it possible that somebody would make a back up in twrp and i would flash it on my phone? or what version of firmware i should start with? what about sideload? does it help? please advise.
Click to expand...
Click to collapse
Hello!
I have similar problems, but i have the L09.
Check if you can mount system. Or if you can wipe system, because i can't
Good luck!

After recovery and system fastboot flash can't get to 3button format

I found a guide to downgrade my honor h60 l02 and it said to replace the recovery and system with the stock ones from SYSTEM.img and RECOVERY.img in official roms (through fastboot) and I got those files from version b535 using huawei extractor. After flashing those 2 I couldn't start the 3 button format procedure to update with the b535 rom in the dload folder on my sdcard. So I searched for an unbrick procedure and found one on multitool honor 6 xda page. I flashed the boot,cust,system,recovery from b535 with multitool unbrick procedure and still couldn't get in the emui installation screen by pressing vol+vol-power. I tried reformatting sdcard to fat 32 and put again dload folder with update.app inside. I even tried to press the 3 buttons with card partially introduced but still can't start the update procedure. Used another microsd card but no starting. I finally tried to install a custom recovery but only got to install twrp 2.8.70 v2 for emui 4.0 . Before the whole BIG problem I think I had rom with 6.1.19 version which actually had problems with the bluetooth not starting and that was the reason I wanted to downgrade. I also tried to install 2 custom roms for h60 l02 but I got error on zip installation which seems weird considering at list that should work if I can't use the update procedure. I could probablly use fastboot to install all images required for rom but I can't find a scatter file info or a partition guide anywhere for h60 l02 because I cant install any zip from twrp recovery except gapps.
Any help is welcomed! I'll buy you a bear if u can help me !

Problem solved
So I finally got to fix the phone. I found out that the phone was updated to a Marshmallow rom in the beta stage by my friend who gave it to me. The rom was identified succesfully after some searches on 4pda.ru forums where a couple of russians are experimenting how to put android 6 on honor 6 devices. The version was 5.12.31_beta which in device id I think it apears as h60-C00b690sp01. I put the stock recovery and boot from that image with fastboot on phone. Wanted to put also system and cust images but the rom is an update zip which has mixt type of data (system, cust and a few other partition datas are directly in the zip with meta and inf datas while boot,recovery and a few other partition datas are inside the update.app in the zip). Luckilly for me after the boot and recovery flash I could start stock recovery with vol+power button press and also could finally start force update procedure with vol+vol-power buttons pressed (keep in mind that from fastboot I pressed the 3 buttons continuoselly while the phone restarted , went to a honor logo display, after about 5 seconds it restarted and started emui installation screen; for some reason even from powered off state the device needed to go to the honor screen before on the restart to emui installation screen and Ive seen videos where the devices just go straight to emui installation screen). I got a downgrade package from 4pda.ru forums and tried to install it with forced update procedure but it got stuck at 5%. After 1 more day I figured out that I need to pull the usb cable out before the emui installation screen because it would show a usb connected icon on screen instead of showing emui installation icon (I thought at first that thats how it should look for marshmallow stock roms xD) and Im thinking that if u keep usb cable plugged in it tries to get flash image from usb and if that is unplugged it tries to get image from sdcard dload folder. So I flashed the downgrade version and after restart to honor logo screen I restarted device to fastboot mode with ofc vol-power buttons pressed and pulled the sdcard out. I replaced downgrade package (update. app from H60-LX2_EMUI4.0_2_EMUI3.1 dload) with the dload folder of the b535 stable rom (H60-L02-L12_EMUI3.1_Android5.1_C00B535 rom) on the sdcard. I restarted device and used again 3 button update without usb plugged in xD and it installed all the way. After 100% installation the device rebooted and after showing a big „w” it got to pulsating honor logo screen and after about 10 minutes it showed me language menu for language selection. And the desperation saga ended xD. Happy ending!!!

[SOLVED] H60-L02 bricked beyond recovery? Plz help me!

edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)

mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.

With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!

mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.

Thx. I will give it a try when I'm back from work.
I let you know if it is working.

mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice

Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike

mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.

Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.

mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.

It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike

The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.

igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?

error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.

igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.

Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..

igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.

zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse

i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!

mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"

Help i killed my phone

Hi guys!
Yesterday i unlocked my bootloader and i installed TWRP. Im on the beta version emui 5 and android 7.0. when i tried to install the SUuser somthing happend and my android system and emui files disappeared. The phone did not boot anymore. So i tried to enter bootloader and use HiSuit to factory reinstall the OS but i got an error message saying "this device is not supported".
Then i tried to download the stock firmware to my phone and placed it on the external sd card and tried to flash it with TWRP i'v got some error message saying some thing with "/data" atleast i'v got some success the system booted up but i'm missing a the emui keyboard and som of the factory apps and drivers.
I have also tried holding the power up button for 3sec but still an error message saing "Getting package info failed"
Please help me get my phone back

Lucas Napik said:
Hi guys!
Yesterday i unlocked my bootloader and i installed TWRP. Im on the beta version emui 5 and android 7.0. when i tried to install the SUuser somthing happend and my android system and emui files disappeared. The phone did not boot anymore. So i tried to enter bootloader and use HiSuit to factory reinstall the OS but i got an error message saying "this device is not supported".
Then i tried to download the stock firmware to my phone and placed it on the external sd card and tried to flash it with TWRP i'v got some error message saying some thing with "/data" atleast i'v got some success the system booted up but i'm missing a the emui keyboard and som of the factory apps and drivers.
I have also tried holding the power up button for sec but still an error message saing "Getting package info failed"
Please help me get my phone back
Click to expand...
Click to collapse
First, i have no ideea if this will work for you but this is what i done when my P8 Lite was f**ked up.
Download the rom what you want, a stock one, sure, and use Huawei Extractor to extract the cust.img system.img recovery.img and boot.img from update.app, after that flash through bootloader.
P.S. I'm saying again, i have no ideea if this will work for this phone but it should.
Or maybe you can try flashing only the recovery.img through bootloader,copy update.app in dload folder on SD Card and do a force update.
I hope this will help you,let me know :good:

download this file
extract it .
get update.app out .
make new a folder
name it dload
put update.app inside
copy the dload folder to ur SD
power off .
press 3 buttons ( volume+ and volume - and power 3~5 seconds . will start upgrading
ur phone will come back to life .
u can also come back here if didin't success !

Romiui said:
download this file
extract it .
get update.app out .
make new a folder
name it dload
put update.app inside
copy the dload folder to ur SD
power off .
press 3 buttons ( volume+ and volume - and power 3~5 seconds . will start upgrading
ur phone will come back to life .
u can also come back here if didin't success !
Click to expand...
Click to collapse
I used the dload method but I'm stuck on the start up logo.

ThePandaGuy said:
I used the dload method but I'm stuck on the start up logo.
Click to expand...
Click to collapse
Did you find any solution?