Database Info

I terrible bricked my Honor. Fastboot not working. Need help.

Hi I install one application (host name changer) and restart the phone and it stop working. Stops at HONOR screen. I enter to bootloader, open multi-tool and change recovery. Unfortunately bootloader not eorking ok, because when I wanted to upload IMG files to unbrick the phone, I get the error in Multi-tool. I decided to format/clean all data (I use CWM recovery and later also TWRP recovery). Again uploaded stock recovery and try use 3 buttons. Unfortunately installation start and after one second failed.
I also try to use QTADB to upload updata.apk but it not working - there is problem with bootloader. Also Minimal ADB not working - doesn't see Honor.
How can I upload / install rom now?
Is it possible instal ROM from external SD card? I try but on external card (using CWM) I see no files?

You can't use other recovery than the stock one to use 3 buttons. If the phone is not recognized by adb I'm not sure if you can restore it.

I used 3 buttons with stock recovery, and installation failed.

Did you replaced build.prop and local.prop with the original ones before 3 buttons?
Las night installed B310 without any problems.

I did not replace build.prop and local.prop because I install some other app which - I guess - modify build.prop and this is why I have that problems. Afert I reboot phone it brick on HONOR loco and Minimal ADB do not response. When I connect USB cable and enter to bootloader the PC see the phone, Hisuite start but can not connect. So I have problem with bootloader - it does not response using Minimal ADB. Onlu Multitool lets me change recovery. All I can do now is enter to recovery, bootloader, change recovery (only with Multitool), start install ROM (using 3 buttons) but it failed immediately.

Try to install stock dev rom 4.x.x
4.x.x roms have not prop checker so you can install them via 3btns

But how to upload this rom to HH? All I can do is using Minimal adb (not all function, but sometime I can use pull and push functions);

[email protected] said:
But how to upload this rom to HH? All I can do is using Minimal adb (not all function, but sometime I can use pull and push functions);
Click to expand...
Click to collapse
Put it on a SD Card?
If you can enter fastboot and your bootloader is unlocked you can try to flash the system.img via fastboot. But since you have CWM it shoul be unlocked

Finally the Multi-tool stoped responding (I couldn't upload img files to unbrick - there was an error).
But suddenly the Minimal ADB started responding, and I uploaded build.prop and after that I flash recovery.img, system.img, boot.img and cust.img.
Thanks for help.

The following is irrelevant. Just to share.
I messed up honor 6 plus once. It booted then it permanently hanged. Black screen, home launcher does not respond, no navigation bar. Power button worked with the options to reboot and power down.
Before I messed it up, I have unlocked the boot loader and flashed cwm and rooted by install zip.
I tried to fix it by cwm wipe data, wipe cache, wipe dalvik but that did not help.
Later I found that I was able to boot into fastboot mode and managed flashing back stock recovery. Then I downloaded a full stock ROM, decompressed the dload and copied it to root of a sdcard. Then I applied three finger update. It worked and fixed the problem.

HmMarques said:
Did you replaced build.prop and local.prop with the original ones before 3 buttons?
Las night installed B310 without any problems.
Click to expand...
Click to collapse
What are build.prop and local.prop ? Where to replace it ? How to get these type of file ?
Please help me my Honor 6 H60 L02 is bricked and I cant understand anything..

Devandrogeek said:
What are build.prop and local.prop ? Where to replace it ? How to get these type of file ?
Please help me my Honor 6 H60 L02 is bricked and I cant understand anything..
Click to expand...
Click to collapse
Read this thread carefully: http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180
There you have all information.
Search here for your buil.prop and local.prop : https://www.mediafire.com/folder/o3tgl8z4u21dz/STOCK_build.prop_&_local.prop

HmMarques said:
Read this thread carefully: http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180
There you have all information.
Search here for your buil.prop and local.prop : https://www.mediafire.com/folder/o3tgl8z4u21dz/STOCK_build.prop_&_local.prop
Click to expand...
Click to collapse
Actually my question was, how to get a stock recovery and how to set permissions ?

Devandrogeek said:
Actually my question was, how to get a stock recovery and how to set permissions ?
Click to expand...
Click to collapse
Well to set permissions you must use either root explorer or ES filexplorer, personally I use the last one with root privileges on.
after you move the files to correspondent folder you need to click on it for a few seconds and then go to properties/permissions and check only left column all 3 and middle column the first from above.
As for stock recovery go to the thread of Honor multi-tool, there you have how to and were to download stock recovery.
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060

HELP HELP HELP!!! Please!!! I cant put my Honor in fastmode!!! I tried to put cwm in Marshmallow 6.0 and bricked!!! I was able to use but I did a factory reset and it just dont pass the honor screen at the beginnin!!! Please Somebudy help!!! Sorry for my bad english!!!

Hi all, bricked my honor 6 plus firmware b133 after updating it with OTA b334 to b503 (marshmallow 6.0) RU.zip
Now after powering on there is bootlogo only for a second, and black screen after with flashing led lights with green and red.
Can't enter to recovery mode, only fastboot mode is available when connecting to pc.
Can flash without errors all files from fastboot: system.img, recovery.img, cust.img, boot.img but it can't help to fix phone
Will buy you some beer for successful solution
Thank you

[SOLVED] P8max softbricked, need system.img

Hi guys,
I accidentally wiped /system from my phone, and now I can't get it back.
I've tried downloading the OS zip from the Huawei site and running it from an SD card like it says, but it just fails.
I've also tried extracting system.img from the file with a tool I found here, but it won't flash with fastboot, it just fails saying it can't load the file. It seems like maybe it's encrypted in some way.
Does anyone have any ideas on what I can do to fix this? Can anyone upload a system.img file I can flash to my device?
Thanks

I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.

Thank you so much! It worked! It's booted up fine after installing the update from the SD card.
I'm just doing the OTA updates now.

AGoodName said:
Thank you so much! It worked! It's booted up fine after installing the update from the SD card.
I'm just doing the OTA updates now.
Click to expand...
Click to collapse
Great, glad to hear that

??
i7mmodi said:
Great, glad to hear that
Click to expand...
Click to collapse
Hi,
I don't understand why when stock recovery I flash the stock recovery via Fastboot and when it reboots, it stuck at 90% with the message Huawei software installing...
Please Help me what to do

lvpl said:
Hi,
I don't understand why when stock recovery I flash the stock recovery via Fastboot and when it reboots, it stuck at 90% with the message Huawei software installing...
Please Help me what to do
Click to expand...
Click to collapse
Do you have unlocked bootloader !!
and use stock recovery in this thread , don't use from another source .

i7mmodi said:
I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.
Click to expand...
Click to collapse
hi do u have the p8 custom rom? the link u stated is not working. thks

http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436

AGoodName said:
http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436
Click to expand...
Click to collapse
thks but my phone still cannot boot after installing.

But after it flashes it should let you run the update from the SD card, just need to reflash stock recovery.

i7mmodi said:
I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.
Click to expand...
Click to collapse
how could the p8 rom work with our p8 max?
so this mean that i can flash this rom ?

Flash official recovery. Download official b021 ROM. Create "dload" folder in your SD card. Extract b021 and put into dload folder. Press volume up+ down button. System will auto install and reboot.
Good luck

william1974 said:
thks but my phone still cannot boot after installing.
Click to expand...
Click to collapse
because there is an update , you should redownload the official rom "V100R001C233B023" , they update it already .
so simply , these are steps :
1- download the official rom from here :
http://download-c.huawei.com/download/downloadCenter?downloadId=53426&version=166267&siteCode=cn
2- download stock recovery from here :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
3- unzip official rom and put "dload" folder in root of Sd card then put it in P8max.
4- keep pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
now you should boot with official rom.

Not working
i7mmodi said:
because there is an update , you should redownload the official rom "V100R001C233B023" , they update it already .
so simply , these are steps :
1- download the official rom from here :
http://download-c.huawei.com/download/downloadCenter?downloadId=53426&version=166267&siteCode=cn
2- download stock recovery from here :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
3- unzip official rom and put "dload" folder in root of Sd card then put it in P8max.
4- keep pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
now you should boot with official rom.
Click to expand...
Click to collapse
I performed all tasks but says rom is corrupt

Can you please upload stock recovery as link not working anymore.

Bumping for link update too please

qoozy said:
Bumping for link update too please
Click to expand...
Click to collapse
Stock Recovery is in P8Max Root Thread.

Hirs_E_Fruit said:
Stock Recovery is in P8Max Root Thread.
Click to expand...
Click to collapse
I followed these steps, but do i have to install B029 stock now?
cause it always says that software is incompatible with current version??

Hi guys
the link for stock recovery has been expired
anyone can upload it for me?

[SOLVED] H60-L02 bricked beyond recovery? Plz help me!

edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)

mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.

With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!

mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.

Thx. I will give it a try when I'm back from work.
I let you know if it is working.

mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice

Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike

mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.

Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.

mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.

It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike

The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.

igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?

error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.

igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.

Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..

igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.

zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse

i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!

mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"

Huawei Mate 8 (NXT-L29) won't boot into recovery.

Hey folks,
I've tried a few tipps others gave me here on xda, but nothing could fix my problem.
My situation looks like this:
I've been playing around w/ some TWRP versions and Custom ROMs,
and out of sudden my phone got soft bricked (stuck at the »Your phone is unlocked and can't be trusted« screen).
I was able to bring it back to life, via the Italian Knife and official stock ROM.
So, now I'm back at stock (NXT-L29C432B320) but my bootloader is still unlocked.
And it doesn't matter which TWRP version I flash, my phone won't boot into recovery,
so I'm not able to flash a Custom ROM.
If I try to enter the recovery mode it get stuck on »Your phone is booting now...« ... doesn't matter how long I wait, it won't boot.
If I flash a stock recovery, I can enter the Huawei eRecovery, but that doesn't help much.
Someone told me I have to lock my bootloader again to start the whole unlock / root stuff from scratch,
but if I try to lock it via fastboot it always fails w/ the »command not allowed« message.
The developer options & USB Debugging options are enabled and the Enable OEM unlock option, too.
Is there anything I can do or am I screwed?!
Btw, dload is not possible, 'cause the phone freezes if I try to do it from the dialer menu
and if I try to do it via the button combo, the phone just enters the Huawei eRecovery.

Read threads in general section and you can restore easily

bluheart said:
Read threads in general section and you can restore easily
Click to expand...
Click to collapse
I did. That's why I created a new thread, 'cause nothing I found there solved my problem.
if you can give me an advice I would be really happy.

Do a dload of your region firmware
This should solve your problem

Put Update.app on SD card in dload directory.... use the latest firmware for your phone region or last used stock firmware.
Install SD card.
Power off.
3 button startup will install firmware on your phone and your phone will be stock and locked.
If you get :not compatible story you must adb and fastboot cust files using @somboons tools.

i had read your problems
it same as my problem so i flash with Decrypted & Insecure boot.img with adb fix via adb truely version 320or ver.......
links :http://forum.xda-developers.com/mate-8/orig-development/kernel-insecure-boot-img-t3311306
after thats reboot if can not reboot must dload agains
wishing can help you
goodluck

3btn dont work!!!

Hi, i need some help
At this time I have the honor totally clean, without any android system. I'm trying to install a rom and when I get to step 3 of the buttons does not work. It is the original logo of honor and not out there.
tks

Try this.
DigiGoon said:
Follow the below steps, and you'll get back to stock:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Click to expand...
Click to collapse

goldfinv said:
Try this.
Click to expand...
Click to collapse
Don`t work
The 3btn still does not work

b4co said:
Don`t work
The 3btn still does not work
Click to expand...
Click to collapse
What do you mean by does not work?
You can not start a forced update or forced update fails?
Is your bootloader unlocked or locked?
What were you using before the problem?
Firmware or custom rom?
Which firmware or if a custom ROM then what was the Android version?
Sent from my PLK-L01 using XDA Labs

I solved the problem in another way
After trying a thousand and one thing, the resolution to my problem was simpler than I thought.
I decided as follows:
- Having no memory card, I bought one and put in tlm
- I drew a full back to my rom, in this case a custom 6.9.1
- I put this full rom (zip file) on the memory card
- Through the TWRP did factory reset through the bootloader option
- Again by TWRP I chose installed the full rom had put the memory card
- He installed, I restart and voilá
Note that after doing this, it took a long time to set everything up. In the second logo of honor it took about 15 or 20 minutes.

It's probably due to hardware, if 3btns method don't work you can't install a fw

b4co said:
I solved the problem in another way
After trying a thousand and one thing, the resolution to my problem was simpler than I thought.
I decided as follows:
- Having no memory card, I bought one and put in tlm
- I drew a full back to my rom, in this case a custom 6.9.1
- I put this full rom (zip file) on the memory card
- Through the TWRP did factory reset through the bootloader option
- Again by TWRP I chose installed the full rom had put the memory card
- He installed, I restart and voilá
Note that after doing this, it took a long time to set everything up. In the second logo of honor it took about 15 or 20 minutes.
Click to expand...
Click to collapse
Glad you found a way to make it work
Sent from my H60-L04 using XDA Labs