Related
Please help me root my lg optimus P500 with gingerbread V20G downloaded from lg's server.Its not even getting rooted my superoneclick & gingerbreak.Pls help.....
Sent from my LG-P500 using XDA Premium App
Wrong forum buddy. Belongs in general
Sent from my LG-P500 using XDA App
doktornotor rage summon
I give up. Click on the recovery howto in my signature and flash custom recovery. After that, flash a rooted ROM. If you dislike this advice, then kindly search harder. People generally get irritated when then are answering the same questions 10 times a day because people are too lazy.
superoneclick (gingerbreak exploit) work for me on stock V20c, check this thread:
http://forum.xda-developers.com/showthread.php?t=1156403
hxxp://www.lg-p500.ru/2011/06/root-android-233.html
shanktech said:
Please help me root my lg optimus P500 with gingerbread V20G downloaded from lg's server.Its not even getting rooted my superoneclick & gingerbreak.Pls help.....
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Hi guys, regarding the problem about rooting the original GB, it can be done, and it's not that complicated.
First of all there are a couple of things that you have to consider before starting to root.
1. Be sure that you have installed the original V20G GB ROM.
2. if you have it installed and tried different methods to root on it do a factory reset before trying this one.
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
4. Download SuperOneClickv1.9.5-ShortFuse, after download extract the files into a folder with the same name as the archive.
5. After you extracted the files, go to C:\Windows\System32 and copy the cmd.exe to the folder where you extracted the files, in my case C:\Users\myuser\Desktop\SuperOneClickv1.9.5-ShortFuse\ADB.
6. Connect the phone to the PC with Debugging mode (Enter the phone settings menu, to the Development and tick the USB debugging mode)
7. right click on cmd.exe from the ADB folder, Run as administrator, than write:
adb devices (after this command you should see your device id)
adb shell
echo 1 > /data/local/lge_adb.conf,
Do not close the window, live it like that.
8. Start SuperOneClick.exe, leave the settings to the SuperOneClick as they are when it opens, click on ROOT and wait, it will say Starting ADB server..., than it will do it's job and than it will appear Waiting for device... it will say ok and that if it freezes while running psneuter do the following:
a. Turn USB Debugging OFF wait until it will appear in the window again Starting ADB server..., after that,
b. Turn USB Debugging ON, and after this trick it will start rooting.
This is the method that i did twice and it worked like a charm.
After this it will ask you to reboot the phone, DO NOT FORGET, and after the reboot click on the SuperUser icon in the phone's menu. it will aks you if you allow or deny it's access. click allow. After this you must connect to the internet via Wireless or a apn, click on the superuser icon again if you exit it, go to settings, scroll down and you will see Su Binary v.XXXX, click on that to update it, than go to market and search the super user app and update it. Also update busybox. After this you have root access and you can install a custom recovery. Also you can install your preferred Kernel if you don't like the stock one.
If you do not get the Allow Deny message the root was not completed successfully. do a factory reset and try again the same steps.
see images attached as proof.
Well, I installed V20 C via doktornotor method but couldn root it by flashing the signed su binary via recovery.
So I tried the above mentioned method and it worked. But every time the Superuser Force closes and its too buggy.. Any solutions. ?
Yes, same here, i tried doktornotor's method both 20C and 20G and didnt work, this Super1click works but su force closes everytime Any ideeas??
====================EDIT============================
I managed to root gingerbread with doktornotor's method V20g
Just use his image, BUT dont use su-2.3.6.3-cd-signed.zip
Download from here http://forum.xda-developers.com/showthread.php?t=1110733 su-2.3.6.2-efgh-signed.zip and install it wia clockworkmod recovery zip installer and works like a charm
omfg! plz make Zroot for 2.3.3
g0mezz said:
Hi guys, regarding the problem about rooting the original GB, it can be done, and it's not that complicated.
First of all there are a couple of things that you have to consider before starting to root.
1. Be sure that you have installed the original V20G GB ROM.
2. if you have it installed and tried different methods to root on it do a factory reset before trying this one.
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
4. Download SuperOneClickv1.9.5-ShortFuse, after download extract the files into a folder with the same name as the archive.
5. After you extracted the files, go to C:\Windows\System32 and copy the cmd.exe to the folder where you extracted the files, in my case C:\Users\myuser\Desktop\SuperOneClickv1.9.5-ShortFuse\ADB.
6. Connect the phone to the PC with Debugging mode (Enter the phone settings menu, to the Development and tick the USB debugging mode)
7. right click on cmd.exe from the ADB folder, Run as administrator, than write:
adb devices (after this command you should see your device id)
adb shell
echo 1 > /data/local/lge_adb.conf,
Do not close the window, live it like that.
8. Start SuperOneClick.exe, leave the settings to the SuperOneClick as they are when it opens, click on ROOT and wait, it will say Starting ADB server..., than it will do it's job and than it will appear Waiting for device... it will say ok and that if it freezes while running psneuter do the following:
a. Turn USB Debugging OFF wait until it will appear in the window again Starting ADB server..., after that,
b. Turn USB Debugging ON, and after this trick it will start rooting.
This is the method that i did twice and it worked like a charm.
After this it will ask you to reboot the phone, DO NOT FORGET, and after the reboot click on the SuperUser icon in the phone's menu. it will aks you if you allow or deny it's access. click allow. After this you must connect to the internet via Wireless or a apn, click on the superuser icon again if you exit it, go to settings, scroll down and you will see Su Binary v.XXXX, click on that to update it, than go to market and search the super user app and update it. Also update busybox. After this you have root access and you can install a custom recovery. Also you can install your preferred Kernel if you don't like the stock one.
If you do not get the Allow Deny message the root was not completed successfully. do a factory reset and try again the same steps.
Click to expand...
Click to collapse
this also works for rooting v20e european P500 gingerbread rom, so many ppl have asked about this, ffs cannot believe how a small thing can make such a diff
g0mezz said:
echo 1 > /data/local/lge_adb.conf,
Click to expand...
Click to collapse
Should I type the comma at the end on cmd? Can you please explain what exactly the above command does? Does it create the above file on the above filepath on device? If I typed both
echo 1 > /data/local/lge_adb.conf
and
echo 1 > /data/local/lge_adb.conf,
should I erase one of these files?
Without comma.
Help me for rooting Indian V20c LGP500
g0mezz said:
Hi guys, regarding the problem about rooting the original GB, it can be done, and it's not that complicated.
First of all there are a couple of things that you have to consider before starting to root.
1. Be sure that you have installed the original V20G GB ROM.
2. if you have it installed and tried different methods to root on it do a factory reset before trying this one.
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
4. Download SuperOneClickv1.9.5-ShortFuse, after download extract the files into a folder with the same name as the archive.
5. After you extracted the files, go to C:\Windows\System32 and copy the cmd.exe to the folder where you extracted the files, in my case C:\Users\myuser\Desktop\SuperOneClickv1.9.5-ShortFuse\ADB.
6. Connect the phone to the PC with Debugging mode (Enter the phone settings menu, to the Development and tick the USB debugging mode)
7. right click on cmd.exe from the ADB folder, Run as administrator, than write:
adb devices (after this command you should see your device id)
adb shell
echo 1 > /data/local/lge_adb.conf,
Do not close the window, live it like that.
8. Start SuperOneClick.exe, leave the settings to the SuperOneClick as they are when it opens, click on ROOT and wait, it will say Starting ADB server..., than it will do it's job and than it will appear Waiting for device... it will say ok and that if it freezes while running psneuter do the following:
a. Turn USB Debugging OFF wait until it will appear in the window again Starting ADB server..., after that,
b. Turn USB Debugging ON, and after this trick it will start rooting.
This is the method that i did twice and it worked like a charm.
After this it will ask you to reboot the phone, DO NOT FORGET, and after the reboot click on the SuperUser icon in the phone's menu. it will aks you if you allow or deny it's access. click allow. After this you must connect to the internet via Wireless or a apn, click on the superuser icon again if you exit it, go to settings, scroll down and you will see Su Binary v.XXXX, click on that to update it, than go to market and search the super user app and update it. Also update busybox. After this you have root access and you can install a custom recovery. Also you can install your preferred Kernel if you don't like the stock one.
If you do not get the Allow Deny message the root was not completed successfully. do a factory reset and try again the same steps.
Click to expand...
Click to collapse
Hi,
Actually I want root my LG Optimus One .I have INDIA phone with official V20c Rom. Can anybody help me how to root my phone without any risk of bricking it. I have also read many thread about rooting 2.3.3 through super one click {like this one h**p://forum.xda-developers.com/showthread.php?t=1200167} but people were saying something about force close errors... So can anybody provide me a successful and error free method of rooting it. and Please also share me the method to unroot it.
Thanks in advance.
I've read in a topic that I can't find, that after rooting usb debugging should always be on and disabling it could cause problems. I can't remember what kind of problems. Is that true? Should I keep it enabled?
Ok im pretty sure my phone is rooted coz it said in the superuser log root-allowed so yes thnx for helping me root my phone, now install custom recovery bla blah and then rom install
Which Drivers? From where?
[QUOTE=
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
Thanks for the post. But i want to know which drivers? People like me do not know about this so please help. I can connect my phone via usb as i downloaded lg support tool and it installed the driver or drivers. Is that enough?
Awaiting response desperately as i am eager to root now, thanks a lot.
As Lg optimus net have not proper section and as it is successor of o1. I think its right place to post this thread.
After searching and trying many forums over 2-3weeks i m able to root my phone successfully. As there is not a single forum here to root this phone i want to make one, to help those searching for this.
i thanks to "g0mezz " whose method for rooting another phone worked for mine too
First of all there are a couple of things that you have to consider before starting to root.
1. Be sure that you have installed the original V20B o v10c version software on rom. I have tested on these two.
2. If you have it installed and tried different methods to root on it do a factory reset before trying this one.
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
4. Download SuperOneClickv1.9.5-ShortFuse or later version( i used 1.9.5) , after download extract the files into a folder with the same name as the archive.
5. After you extracted the files, go to C:\Windows\System32 and copy the cmd.exe to the ADB folder where you extracted the files, in my case C:\Users\myuser\Desktop\SuperOneClickv1.9.5-ShortFuse\ADB.
6. Enable USB Debugging mode (Enter the phone settings menu>Application> Development and tick the USB debugging mode) and then connect phone to pc via usb cable. (DONT PRESS USB STORAGE) .
7. right click on cmd.exe from the ADB folder, Run as administrator, than write:
adb devices (press enter)(after this command you should see your device id)
adb shell (press enter) (after this command you should see $)
$ echo 1 > /data/local/lge_adb.conf, (press enter)
Do not close the window, live it like that.
8. Start SuperOneClick.exe, leave the settings to the SuperOneClick as they are when it opens, click on ROOT and wait, it will say Starting ADB server..., than it will do it's job and than it will appear Waiting for device... it will say ok and that if it freezes while running psneuter do the following:
a. Turn USB Debugging OFF(DO NOT DISCONNECT CABLE) wait until it will appear in the window again Starting ADB server... after that
b. Turn USB Debugging ON and after this trick it will start rooting.
After this it will ask you to reboot the phone, DO NOT FORGET, and after the reboot click on the SuperUser icon in the phone's menu. it will aks you if you allow or deny it's access. click allow. After this you must connect to the internet via Wireless or a apn, click on the superuser icon again if you exit it, go to settings, scroll down and you will see Su Binary v.XXXX, click on that to update it, than go to market and search the super user app and update it.
Also update busy box.
IF this doesn't work do a factory reset and again repeat these steps.
if this guide works for you do post replies and ...... dont forget to press thanks button
Doesn't seem 2 work. Keeps getting stuck at the point "Running psneuter" and gets stuck. Tried closing debugging and all that but it still gets stuck. Reset it 3 times still no result.
---------- Post added at 02:38 AM ---------- Previous post was at 02:13 AM ----------
Did it!! Yes!! For those who might not be able its very important that in the cmd u write like this:
adb shell (enter)
$ echo 1 > /data/local/lge_adb.conf
Give the exact spaces!! And it worked!!! (Space between echo 1 > /data ... like that)
Chowder93 said:
Doesn't seem 2 work. Keeps getting stuck at the point "Running psneuter" and gets stuck. Tried closing debugging and all that but it still gets stuck. Reset it 3 times still no result.
---------- Post added at 02:38 AM ---------- Previous post was at 02:13 AM ----------
Did it!! Yes!! For those who might not be able its very important that in the cmd u write like this:
adb shell (enter)
$ echo 1 > /data/local/lge_adb.conf
Give the exact spaces!! And it worked!!! (Space between echo 1 > /data ... like that)
Click to expand...
Click to collapse
Yep you have to follow these instruction correctly i have metioned these spaces so .. if u r having problem rooting by this method afrer following these steps correctly then rply.. and also post your rply if u successfully rooted using this....
.
thanks for the guide...i did it...but there is one thing i needed most..this so called tun.ko module to be needed in connecting vpn..is there any one have tried this???
Did u install any custom roms?
Sent from my Optimus Net using XDA Premium.
vicfirth_23 said:
thanks for the guide...i did it...but there is one thing i needed most..this so called tun.ko module to be needed in connecting vpn..is there any one have tried this???
Click to expand...
Click to collapse
no i didnt tried it.....
Chowder93 said:
Did u install any custom roms?
Sent from my Optimus Net using XDA Premium.
Click to expand...
Click to collapse
i didnt find any cw mod recovery for this phone so i didnt tried to install any other rom... but i think cwm recovery of optimus one will also work for this phone... i will try it later on...
I haven't tried installing custom roms in my phone.. some forums said that cfw have stock tun.ko module, a module needed to run the vpn application.
I saw a optimus net CWM installation process.
Sent from my Optimus Net using XDA Premium.
Found it:
http://forum.xda-developers.com/showthread.php?t=1354387
Sent from my Optimus Net using XDA Premium.
still waiting for any feedbacks thanks to TS
LlewoR said:
still waiting for any feedbacks thanks to TS
Click to expand...
Click to collapse
It worked man!! It worked on mine
What exactly is meant by
"Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them."
It means the adb drivers.
is there any development on this like custom rom?im planning to root my phone using this method
is there any development on this like custom rom?im planning to root my phone using this method
Click to expand...
Click to collapse
Yep! There are Custom Roms. I have already flashed one
You Can find em here:-
http://www.androidworld.it/forum/lg-optimus-net-p690-187/
There are only a few but there will be more soon.
thanks for reply mate
thank you sir it works
Did It work??
Chowder93 said:
Did It work??
Click to expand...
Click to collapse
chowder where did you get you custom rom and kernel?maybe you can share it too and its that the best rom for you?thanks in advance
please do keep in touch with this thread hehehe
HI. i am opening these post for people like me that the have the same chineese pad and they cant root it.
I have try to root it with any method but with no succed.
(adb command, z4root, universal root, gingerbreak,oneclick)
at oneclick and adb tablet no recognized as usb. the first thing that i do, is to change the usb drivers with the usb googles drivers.Than oneclick it found it as rooted!but when i press to root it again i had many errors.
i upload a image with device info that i grap form adb
i am start to thinking that they put some protect that we cant have access at the rom. i use root explore r/o its highlight.its give mt the permissionto delete apk from system./app but later i can find them inside. at the info of taach u can see that device is rooted!
anyway. i found a firmware update but i havent test it yet
same issue here
Hi. I too tried to root this chinese pad (Flytouch 6) but unable to. Also I was trying to update the ROM with HoneyComb but unable to. ANy help is appreciated.
Thanks. Mounesh.
mounesh25 said:
Hi. I too tried to root this chinese pad (Flytouch 6) but unable to. Also I was trying to update the ROM with HoneyComb but unable to. ANy help is appreciated.
Thanks. Mounesh.
Click to expand...
Click to collapse
Hi my mate. i have found 2 updates i have test one only and i succed to update it.
these is from another forum:
<<ok new download link for firmware update http://www.multiupload.com/5DI5AAL5BQ
i have found a issue with it when you go into android market because this as the latest android market apk it will let you download games etc free and paid but on some it comes up not enough memory,but i noticed by going into settings and clearing google framework and shutting down tablet a few times it allowed me to download a lot more i have put a earlier android market apk on which works perfect,but when i shut down tablet it goes back to newest android market apk?so if you know of a way to delete the android market apk on the tablet let me know?
////////////////////////////////////////////////////
please note before you start you must have your tablet charging with tablet charger otherwise it will not let you put firmware on tablet
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
the way of flash the firmware of v10
sd-card into tablet while turned off
1,press the "menu"+""power"ON button at the same time
2.release the “power” after the boot up.and keep holding menu
3.pls release the "menu" after the there is a flash firmware picture with a android holding a brown bag/box
4. then you will have to do some scrolling with these buttons
5 function of the button front of the device is page up
6 function of the button of "meun" is page down
7 function of the button of "Home" is confirmation (to install firmware)
you will have to scroll to install from sd-card then press home button
you will have to scroll to your firmware them press home button to install
if you ever need to reflash or restart your tablet for any reason you can do this by holding the the on button and menu?which will allow you to reload firmware etc >>
motherofallbattles thanks a lot
chriskleov said:
the first thing that i do, is to change the usb drivers with the usb googles drivers.Than oneclick it found it as rooted!but when i press to root it again i had many errors.
i upload a image with device info that i grap form adb
i am start to thinking that they put some protect that we cant have access at the rom. i use root explore r/o its highlight.its give mt the permissionto delete apk from system./app but later i can find them inside. at the info of taach u can see that device is rooted!
anyway. i found a firmware update but i havent test it yet
Click to expand...
Click to collapse
I am confused as to what USB drivers you used to get the PC to recognize the FlyTouch...can you please provide a download link to these USB drivers you used? I am trying to get my device rooted as well. Thanks.
Thanks for the update
Hi Cheklov,
I did manager to update the firmware using your given link and instructions.
Thanks mate.
BTW...is there a way I can update to honeycomb version?
I've downloaded a few HC versions meant for other tablets like WMT, HTC etc..but no way could I update. Any instructions and link is appreciated.
Thx, Mounesh.
flytouch5.user said:
I am confused as to what USB drivers you used to get the PC to recognize the FlyTouch...can you please provide a download link to these USB drivers you used? I am trying to get my device rooted as well. Thanks.
Click to expand...
Click to collapse
to change the drivers of wopad go to devices and printers.there you will find it as usb storage.there press right click.then hit at the 2nd tab and then prpoerties.chancge manual the drivers.
http://www.megaupload.com/?d=JA6F5VS6
mounesh25 said:
Hi Cheklov,
I did manager to update the firmware using your given link and instructions.
Thanks mate.
BTW...is there a way I can update to honeycomb version?
I've downloaded a few HC versions meant for other tablets like WMT, HTC etc..but no way could I update. Any instructions and link is appreciated.
Thx, Mounesh.
Click to expand...
Click to collapse
i have no idea for custom rom.i think its to early..the chinese pad its to new...no one havent succed to root it.
I ROOT IT!!!!!
FINALY I SUCCED TO ROOT IT!!!
i succed by adb cmds!!
ADB root
ADB shell mount -o remount,rw /system
ADB push su-3.0.3.2-efghi-signed /system/xbin/su
ADB push su-3.0.3.2-efghi-signed /bin/su
ADB shell chown 0.0 /bin/su
ADB shell chmod 04755 /bin/su
ADB shell chown 0.0 /system/xbin/su
ADB shell chmod 04755 /system/xbin/su
ADB shell mount -o remount,ro /system
ADB install -r Superuser-3.0.7-efghi-signed.apk
reboot UNISTALL superuser.apk and INSTALL IT again!
@chriskleov can you tel me more about this updates?
is there update to android 3.0 or higher?
USB OTG control problem
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
wipe data then
try to reflash the upadate
and then aagain wipe
done that
Ive already done that. But result is same.
anyone can help?
mounesh25 said:
Ive already done that. But result is same.
anyone can help?
Click to expand...
Click to collapse
http://www.apad.tv/apadforum/list.php?category/46-Flytouch-5-Wopad-Firmware
Who can tell me why the Navionics Marine 2.1 crashes (force close) after hitting "i agree" in the beginning? Your help would be highly appreciated!
USB problem
hi all
I.ve updated with the file from the above post and noe I have the same problem with the usb
force close - no way to connect to PC
please help
You can try this method to root, it is for another similar vimicro device:
Q: How to root the Haipad M8?
A: You need the GingerBreak and some manual work.
You need to have an installed Android SDK with adb.exe or take this archive with adb.exe only. And you need to have a modified USB driver.
Connect the Haipad M8 to the PC (USB OTG). You will have to install modified USB driver if it is needed.
"USB debugging mode" must be enabled in the device.
Run the cmd.exe and go to a directory where the adb.exe is located (for example: cd d:\adb)
Run command:
Code:
adb root
adb shell
must be # in the prompt (root mode)
Code:
cd /bin
check a symlink su
Code:
ls -l --color=never su
"su -> busybox" is not right. Delete the symlink su
Code:
rm ./su
Install the Gingerbreak and root device.
Install the RootCheker and check the root.
Instructions taken from here: http://www.chinadigitalcomm.com/haipad-m8-vimicro-vc882-t10830.html
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
Can you try to install the attached package and see how it goes. Just confirm you want to replace the existing version. It worked for me.
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
Go to system/app
find usbcontrol.apk
install it
you get a fault (not installed)
after that it works agian
hey!
I found this:
blog.mcbub.com/index.php/tablet-pc/10-2-zenithink-c91-android-4-0-firmware-update-guide-beta-version
Do you think it would work on superpad? Because in guess that zenithink is kind of same thing like superpad m I wrong?
czy86 said:
I found this:
blog.mcbub.com/index.php/tablet-pc/10-2-zenithink-c91-android-4-0-firmware-update-guide-beta-version
Do you think it would work on superpad? Because in guess that zenithink is kind of same thing like superpad m I wrong?
Click to expand...
Click to collapse
I don't know but would be nice!
Hi,
I'm a newbie here, i tried rooting my sony xperia tipo dual
Android version : 4.0.4 / kernel version : 3.0.8-perf / Build number : 11.0.A.6.8
using unlockroot
USB debug enabled-MTP mode- sony pc compnaion installed-MTP driver installed
i run unlockroot, waited for long time but nothing popped to choose my device
so i tried hitting root thats what happened :
error box:
failed to chmod file: busy box
then shows a popup that sees my device, i choosed it
then error box :
failed to chmod file: rootutility
then eror box :
failed to get shell root
Can you help ?
i sthere a pre-rooted ftf for the tipo that i can just flash ?
Hello,
Well, UnlockRoot isn't the only tool out there... You have Doomlord's, the one from Bin4y, Framaroot, SRSroot etc. One of those should work. Plus, there are probably a lot of threads where this is discussed. Try to use Google or XDA-search, and I promise you that magic will happen
Success, and have a nice day.
Sent by magic!
if unlockrot did not pop out the option to choose your phone that means adb drivers may not be properly installed.
install them again and try.
you can also try doomlord's toolkit.
c4cyro said:
if unlockrot did not pop out the option to choose your phone that means adb drivers may not be properly installed.
install them again and try.
you can also try doomlord's toolkit.
Click to expand...
Click to collapse
Doonlord easyrooting worked!
thanks
You can press the thanks button..it will help me.
Sent from my ST23i
hello everyone.. i have a htc one s ..
3 days ago it just went off with enough battery for no reason and it is not possible to switch it back on.. also power und volume buttons dont work and the screen always stays black .. i charged it for over a day and still completely dad..
when i connect it to the pc, i hear the sound of a new connection, but i think that it is just charging.. i see qhsusb_dload in the device manager the phone was never rooted or anything like that .. i just want to get my data back .. especially the photos on it.. would it also be possible to open the phone and get the sd card out or isn't there such a card? is there any chance to get the data out .. i already bought a new phone but i really would love to get all the photos back which havent been backed up for a year
thank you all in advance!
Try this http://unlimited.io/qhsusbdload.htm to relive your phone
Thank you for your fast reply.. but sorry, i have no idea how to install and boot to ubuntu
may someone please explain it to me step by step?
You can download from www.ubuntu.com and try to make a live usb with unetbootin. After that start up your pc from usb and run ubuntu. then download http://unlimited.io/qhsusbdload.htm and try
okay .. it is downloading and what to do next? just put the file on a usb stick? and how to boot from the stick?
sorry for being such a noob
Oh Men... Hahaha. Its very difficult explain here ... You can search how to make a ubuntu liveusb. And how to try ubuntu with out installed... Then when you Boot on ubuntu follow the instrucctions http://unlimited.io/qhsusbdload.htm
okay.. i created the usb stick and booted to ubuntu.. i downloaded the file and opened the terminal
then i connected the phone via usb and entered the commands.. still the phone stays black .. no matter how long i press the power button .. any ideas?
[email protected]:~$ cd Downloads
[email protected]:~/Downloads$ unzip PblClear.zip
Archive: PblClear.zip
inflating: PblClear
[email protected]:~/Downloads$ chmod 755 PblClear
[email protected]:~/Downloads$ sudo modprobe qcserial
[email protected]:~/Downloads$ sudo ./PblClear
============= PblClear 0.1 =============
(c) Copyright 2012 Unlimited.IO
This program may not be redistributed in
nor included in other works works without
the express permission of team Unlimited.
Starting pblreset...
Press ENTER to start
QDL reset
Lisa1991 said:
okay.. i created the usb stick and booted to ubuntu.. i downloaded the file and opened the terminal
then i connected the phone via usb and entered the commands.. still the phone stays black .. no matter how long i press the power button .. any ideas?
[email protected]:~$ cd Downloads
[email protected]:~/Downloads$ unzip PblClear.zip
Archive: PblClear.zip
inflating: PblClear
[email protected]:~/Downloads$ chmod 755 PblClear
[email protected]:~/Downloads$ sudo modprobe qcserial
[email protected]:~/Downloads$ sudo ./PblClear
============= PblClear 0.1 =============
(c) Copyright 2012 Unlimited.IO
This program may not be redistributed in
nor included in other works works without
the express permission of team Unlimited.
Starting pblreset...
Press ENTER to start
QDL reset
Click to expand...
Click to collapse
that its just a idea... maybe work maybe not . you follow the instructions very carefully?
Yes. I did it just like the instructions and at the end it said qdl reset
but it is still not possible to bring the device back to life ..
is it somehow possible to save the data? i read about opening the HOS and unplug the battery.. would you think that this could help? or is there any other chance?
Lisa1991 said:
Yes. I did it just like the instructions and at the end it said qdl reset
but it is still not possible to bring the device back to life ..
is it somehow possible to save the data? i read about opening the HOS and unplug the battery.. would you think that this could help? or is there any other chance?
Click to expand...
Click to collapse
Really i dont know my friend . I dont think the one s have a sd internal.. so i dont know how to save data... The only way is turning on the phone
anyone else?
when i connect it to the pc it is shown in the device manager as "unknown device" .. so it really looks like it has left the qhsusb_dload mode.. but still no chance to get access to the data or to switch it back on
Lisa1991 said:
anyone else?
when i connect it to the pc it is shown in the device manager as "unknown device" .. so it really looks like it has left the qhsusb_dload mode.. but still no chance to get access to the data or to switch it back on
Click to expand...
Click to collapse
You have installed lasted HTC drivers?
yes ... deinstalled them and installed them again .. also the phone doesn#t start without using the pc
Lisa1991 said:
yes ... deinstalled them and installed them again .. also the phone doesn#t start without using the pc
Click to expand...
Click to collapse
Dont start without using pc? Did you mean with pc turn on?
that is what i did .. and it seems like the phone got out od the dload mode... but still i cant switch the phone on
and if i connect it to the pc, it only starts charging but i dont get access to the data, because it is still switched off...
Lisa1991 said:
that is what i did .. and it seems like the phone got out od the dload mode... but still i cant switch the phone on
and if i connect it to the pc, it only starts charging but i dont get access to the data, because it is still switched off...
Click to expand...
Click to collapse
Are you try connect to pc and press power+volDown for a Long time?
more than two minutes.. no result..
Moderator Information,
Thread cleaned. Keep posts on topic.