Related
Alright, I know this is a known issue and I've read every thread detailing people saying they have this issue but none that have it solved so I'm posting it here since we have some pretty smart guys browsing our forums and I'm hoping one of them can help.
Here is the problem: My 2010 MacBook Pro will recognize my phone as a USB drive but whenever I try to run ADB commands I get "Error device not found". I've tried both USB ports on the machine and with both the computer knows the Nexus S is plugged in (I checked the System Information and it lists the Nexus S, exactly like that, as plugged into a USB port) but it won't recognize it. In the past I've used an older MacBook which could recognize the phone but that is no longer an option. I've tried uninstalling and reinstalling the SDK a few times but never to any avail. Any help would be greatly appreciated.
Forgive me for asking the obvious, but do you have USB Debugging enabled?
distortedloop said:
Forgive me for asking the obvious, but do you have USB Debugging enabled?
Click to expand...
Click to collapse
Absolutely forgiven, I should have stated in the OP that I do in fact have USB debugging enabled.
Had to ask, just to be sure.
Does fastboot work with it (ie, boot to fastboot on the phone and try a fastboot devices command)?
distortedloop said:
Had to ask, just to be sure.
Does fastboot work with it (ie, boot to fastboot on the phone and try a fastboot devices command)?
Click to expand...
Click to collapse
I haven't been able to get any commands to work because once I start the ADB shell I get the device not found error. I could try a different command if you told me what to try
Kill the adb server in your terminal shell:
Code:
adb kill-server
Then try again:
Code:
adb devices
If no joy with that, reboot the phone to fastboot (power off, then press/hold vol+up and then press power on).
Once in fastboot, plug the phone into the Mac USB port, then from the command line in terminal:
Code:
fastboot devices
or might have to be
Code:
./fastboot devices
Not sure what that will tell us, but it would be interesting to know. edit: actually this will tell us if it's a driver type problem or just an adb problem.
FYI - on my MBP the Nexus S shows up as you describe in device manager, so you seem normal in that regard.
distortedloop said:
Kill the adb server in your terminal shell:
Code:
adb kill-server
Then try again:
Code:
adb devices
If no joy with that, reboot the phone to fastboot (power off, then press/hold vol+up and then press power on).
Once in fastboot, plug the phone into the Mac USB port, then from the command line in terminal:
Code:
fastboot devices
or might have to be
Code:
./fastboot devices
Not sure what that will tell us, but it would be interesting to know. edit: actually this will tell us if it's a driver type problem or just an adb problem.
FYI - on my MBP the Nexus S shows up as you describe in device manager, so you seem normal in that regard.
Click to expand...
Click to collapse
Okay, so there were no devices listed for the abd devices and I'm not sure what to preface the fastboot command with since I can't seem to find that in my sdk folder...perhaps I should try reinstalling it again? I know on my windows partition there is a file called fastboot but I've never seen the one for mac
kenvan19 said:
Okay, so there were no devices listed for the abd devices and I'm not sure what to preface the fastboot command with since I can't seem to find that in my sdk folder...perhaps I should try reinstalling it again? I know on my windows partition there is a file called fastboot but I've never seen the one for mac
Click to expand...
Click to collapse
Try the files in this archive attached. Change your working directory in terminal to the one you put them in, doesn't matter what it is. You'll have to use the ./ in front of the commands (./fastboot or ./adb).
Also, have you tried a clean power off and total reboot of the MacBook Pro? Just a shot in the dark with that one, but maybe clean out some memory or something that's screwing you up.
distortedloop said:
Try the files in this archive attached. Change your working directory in terminal to the one you put them in, doesn't matter what it is. You'll have to use the ./ in front of the commands (./fastboot or ./adb).
Click to expand...
Click to collapse
Giving it a shot now
distortedloop said:
Also, have you tried a clean power off and total reboot of the MacBook Pro? Just a shot in the dark with that one, but maybe clean out some memory or something that's screwing you up.
Click to expand...
Click to collapse
I've been booting between Windows and Mac OSX all day trying to get this to work so I've rebooted several times only to have the same issue.
Fastboot devices gave me this output:
serial# fastboot
kenvan19 said:
Fastboot devices gave me this output:
serial# fastboot
Click to expand...
Click to collapse
Glad you noticed that long number was your serial and changed it.
Okay, this tells us that there is nothing wrong with the Mac talking to the phone. That's good news in a way.
I noticed in the Dev section you were asking about this same issue in regards to regaining root.
It seems to me that at this point, with that being your primary concern, you should just use the fastboot mode to fastboot flash recovery clockwork.img or fastboot boot instead of flash. Then you can use clockwork to install the su zip file.
We can worry about getting adb working later on.
distortedloop said:
Glad you noticed that long number was your serial and changed it.
Okay, this tells us that there is nothing wrong with the Mac talking to the phone. That's good news in a way.
I noticed in the Dev section you were asking about this same issue in regards to regaining root.
It seems to me that at this point, with that being your primary concern, you should just use the fastboot mode to fastboot flash recovery clockwork.img or fastboot boot instead of flash. Then you can use clockwork to install the su zip file.
We can worry about getting adb working later on.
Click to expand...
Click to collapse
=O You rule! I was able to fastboot the recovery image and reapply root. Distortedloop you're a ****ing god. I apologize for the profanity but thank you. Thank you. Thank you.
kenvan19 said:
=O You rule! I was able to fastboot the recovery image and reapply root. Distortedloop you're a ****ing god. I apologize for the profanity but thank you. Thank you. Thank you.
Click to expand...
Click to collapse
Great. Glad you're running root again.
Try adb with the file I posted earlier. Also, try cycling the USB debugging a couple of times for good measure.
distortedloop said:
Great. Glad you're running root again.
Try adb with the file I posted earlier. Also, try cycling the USB debugging a couple of times for good measure.
Click to expand...
Click to collapse
Will do both. Again, thank you so much...not being rooted was killing me hehe
kenvan19 said:
My 2010 MacBook Pro will recognize my phone as a USB drive but whenever I try to run ADB commands I get "Error device not found".
Click to expand...
Click to collapse
Hi, I fixed this by installing the Android File Transfer application on the mac. Of course, I had to do the 7 taps on the build number so that I could get to the development settings on the nexus and turn usb debugging on. Also, I had to restart the adb server (adb kill-server; adb start-server).
Occasionally the adb server won't die on a 'kill-server' and I have to kill it manually from the terminal (ps axu |grep adb to find the PID first).
Ahhh wow I've been googling this problem - exact same situation. Now... this might sound ludicrous, but someone asked you if you had enabled USB debugging. Every time I read that bit of advice I was like 'well duh, of course I did, I went and clicked Build number 7 times and became a super rad developer'.
... in short, I made the rather hasty mistake of assuming that enabling the developer options was the same thing as enabling USB debugging. Now ADB is behaving nicely. So - on the off chance you made this same mistake - after enabling developer mode, did you find the now unhidden developer menu and enable USB debugging from there? (please don't flame!) ha ha good luck
My screen first cracked and then the LCD completely went now... I have files I need to retrieve off the phone. It is rooted and running some ICS build... I believe the phone is in USB debugging mode, the screen still 'works' I can unlock the phone but nothing is displayed on the screen. Possibly someone could help me out with the adb process for pulling the contents off the /sd
Any help will be GREATLY appreciated, thank you for your time.
ur usb mass storage should still work. can u just plug ur phone to a usb port and get things off the phone ?
As previously stated. I believe the phone was in USB debugging mode. And now the screen is completely black... impossible to navigate to where i need to be.
You'll need adb setup on your computer, and you'll need to cd your way into the folder with adb.exe. Forgive me for hotlinking, but this will make it easier: Download this file, courtesy of NexusSHacks.com (I believe it is Zedomax around here). I would advise to unzip the contents in this file to your C:\Nexus directory, so that adb.exe is at C:\Nexus\adb.exe.
Now, plug in your phone. Open your start menu and search for "cmd" and open up Command Prompt. This is the basic Windows CLI (Command Line Interface).
First, you'll need to open the directory of the Nexus folder you created earlier. To do this, type in the command prompt:
Code:
cd C:\Nexus
Now, you want to make sure adb sees your phone:
Code:
adb devices
The adb service should start and if it sees your phone it will pop up a serial number. If there is no serial number, you can't use adb while inside android and you'll need to tick the option or find an alternative way. Assuming it finds your device, you are good to go.
In order to copy the /sdcard folder of your Nexus S, you will use the pull command. We will throw all of the files into C:\Nexus\sdcard, for reference. So in the command prompt, type:
Code:
adb pull /sdcard .\sdcard
It looks a little confusing but don't stress. Just make sure you type it in exactly (dot, correct slash, etc). This will take a little while since it might transfer up to ~15GB worth. You'll see a new line with "C:\Nexus>" with a flashing cursor when it is done. Then you can view all the contents of your sdcard at C:\Nexus\sdcard and do with them as you please.
Also note, for this you'll need up to ~15GB of free space on your C:\ partition, make sure you have this before you start. Good luck
old post I know, but I just dropped my Samsung Captivate (rooted with debugging on) and internal screen cracked (gorilla glass is perfectly fine!), so I am in the same boat. After DAYS... actually DAYS of trying everything from every forum I FOUND A FIX!!!
Now admittedly, I am unsure which of these two (or both) fixed the issue, but here is what I did:
via Google Play's online "shop", I installed "Auto Mount Your SD Card" by JRTStudio (admittingly, unsure if this did anything as I cannot verify if it installed or anything via the phone)
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5qcnRzdHVkaW8uYXV0b21vdW50Il0.
then I DL'ed MoboRobo and after a few frustrated phone reboots, usb cable connections and much cursing IT CONNECTED!
http://www.moborobo.com/
I am currently DLing all my files from my broken phone!
I had to pass this along as I said... NOBODY seems to know about this as it has taken me DAYS to do this! Not even ATT (Current carrier) nor Spring (whom I am switching to in a month or so) could help me!
You save my life with that "moborobo". Thank you very much.
Glad I could help!!!
Thanks went to both of u, quit important piece of knowledge.
One question; r u downloading "moborobo" on ur Android, on your pc or on both of them?
just on PC, not needed on the phone unless you want to go via WiFi
Harbb said:
If there is no serial number, you can't use adb while inside android and you'll need to tick the option or find an alternative way.
Click to expand...
Click to collapse
What do you mean by this?
My adb service doesn't detect my phone, I used Droidzone's tutorial. I believe usb debugging needs to be on for adb to work, which in my case is useless cause my screen is broken so can't turn on usb debugging.
This is what happens:
---------------------------
C:\>adb devices
List of devices attached
C:\>
---------------------------
---------- Post added at 11:31 PM ---------- Previous post was at 11:23 PM ----------
^when I say broken, I mean the whole screen is distorted, I cannot see anything
droidoidoid said:
What do you mean by this?
My adb service doesn't detect my phone, I used Droidzone's tutorial. I believe usb debugging needs to be on for adb to work, which in my case is useless cause my screen is broken so can't turn on usb debugging.
This is what happens:
---------------------------
C:\>adb devices
List of devices attached
C:\>
---------------------------
---------- Post added at 11:31 PM ---------- Previous post was at 11:23 PM ----------
^when I say broken, I mean the whole screen is distorted, I cannot see anything
Click to expand...
Click to collapse
Reboot to recovery. Bam, working ADB. You can navigate there pretty easily. Pull battery, then re-insert. VOL + & PWR, two click on VOL -, PWR button once. You're in recovery now.
QtADB also can be used is this case
http://qtadb.wordpress.com/download/
paskalion said:
QtADB also can be used is this case
http://qtadb.wordpress.com/download/
Click to expand...
Click to collapse
No go on this either.
Downloaded QtADB, ran the .exe
Pointed to the folder with the aapt and adb binaries, program opened up
Phone's connected and on (I can hear texts coming through), hit refresh a few times, still not detecting
polobunny said:
Reboot to recovery. Bam, working ADB. You can navigate there pretty easily. Pull battery, then re-insert. VOL + & PWR, two click on VOL -, PWR button once. You're in recovery now.
Click to expand...
Click to collapse
That's a little tough. I'm using a Galaxy S so I'm following instructions for that, but it's hard to know if I'm in recovery mode or not. Since adb doesn't detect the device, it's hard to know whether the phone went into recovery mode, or whether adb is setup correctly. It would be handy for a voice sample to play "recovery mode" once the phone boots into it.
droidoidoid said:
That's a little tough. I'm using a Galaxy S so I'm following instructions for that, but it's hard to know if I'm in recovery mode or not. Since adb doesn't detect the device, it's hard to know whether the phone went into recovery mode, or whether adb is setup correctly. It would be handy for a voice sample to play "recovery mode" once the phone boots into it.
Click to expand...
Click to collapse
You're in the wrong forum, then.
And whether or not adb is installed properly, you would know in your device manager under Windows. Appears as a device.
polobunny said:
You're in the wrong forum, then.
And whether or not adb is installed properly, you would know in your device manager under Windows. Appears as a device.
Click to expand...
Click to collapse
Ok... Galaxy S i9000 stuff goes in the Galaxy S i9000 forum.... that's probably why my other post got deleted! :laugh:
As for adb... it appears as a process in task manager, so it's running - I know that much. It's not appearing as a device in device manager (why would it if it's a process? or are you referring to my phone appearing as a device?)
Only areas I can think of that aren't correct are the environment variable and the way I'm doing recovery mode. Since I can't see the screen, I don't know which one is causing the issue! :crying:
Samsung broken??
Contact this guy in Paris , he's very good and friendly!! he repairs my blue Galaxy S3 in front of me
Tel: 0950 850 500 Direct Technique
repare-galaxy com
don't hesitate to call them because i know their skills and it's very good!!
tell them that u call from Mike ciao guys!!
Problem!
Harbb said:
Code:
adb pull /sdcard .\sdcard
It looks a little confusing but don't stress. Just make sure you type it in exactly (dot, correct slash, etc). This will take a little while since it might transfer up to ~15GB worth. You'll see a new line with "C:\Nexus>" with a flashing cursor when it is done. Then you can view all the contents of your sdcard at C:\Nexus\sdcard and do with them as you please.
Click to expand...
Click to collapse
Hey, I got to this problem and I got stuck. I also have a Nexus S with a cracked screen. When I put in the final phrase into the command window it just told me that 0 filles were pulled! Why didnt it pull my files?
What I am trying to do is get all of my pictures and others off the phone.
Please help!
SkullMblem said:
Hey, I got to this problem and I got stuck. I also have a Nexus S with a cracked screen. When I put in the final phrase into the command window it just told me that 0 filles were pulled! Why didnt it pull my files?
What I am trying to do is get all of my pictures and others off the phone.
Please help!
Click to expand...
Click to collapse
This happened to me as well. You have to make sure that your phone has its sdcard folder mounted. Type "adb shell" to get access to the phones command terminal. Then type in "mount /sdcard" I think, or maybe it was "mount sdcard". Either way will probably work so long as you are in the root directory of the phone. You can navigate around in the phone just like a normal linux terminal. "ls" shows list of files and folders in the current directory, "cd foldername" moves into a folder, "cd ../" moves back, "cd /" goes to root directory, etc. Anyhow, once you have mounted the sdcard, you can type exit to leave the shell terminal, and then issue the command "adb pull /sdcard .\sdcard" to get the files. I had a custom rom image in the root of my sdcard so the move took quite a while ~15 minutes. On success of the pull command you should see a bunch of statuses like:
pull: sdcard/data/somefile -> .\sdcard/data/somefile
pull: sdcard/DCIM/somefile -> .\sdcard/DCIM/somefile
.
.
.
XXXX files pulled. 0 files skipped
(Some more transmission stats)
Hope it works out for who ever reads this.
Side note:
On my phone the screen was smashed. I replaced it and it still would not turn on, but it was still running. I had a rooted phone with CM10 rom on it. ADB debugging was one (if its off your pretty much screwed). I started up the phone, and plugged in the usb cable. I tried to use both adb and fastboot from windows terminal. "fastboot devices" would echo back nothing, and "adb devices" would echo back my phone's device number but state it was offline. So to get it online I did the following:
1.) pull batttery.
2.) boot into bootloader (hold power and volume up) the phone shouldn't vibrate if it does you have just normally powered it on. It took me quite a few times to get this to go into the bootloader. To make sure you get in the bootloader type "fastboot devices". If nothing comes up you not there.
3.) once verified you are in the bootloader you need to go into recover mode. Press volume down twice and then hit power (this would normally move the cursor on your phone down to recovery and select it if you could see whats happening on the screen).
4.) wait a bit for it to load into recovery, try typing "adb devices". You should eventually see you device show up as online. At this point you may enter the shell as above, mount the sdcard, exit the shell and pull your files.
Windows instuctions:
Prerequisites are installing adb.exe and fastboot.exe via installing the Android SDK on your computer. They will show up in the platform-tools folder of the install location. Add that folder to your environmental path variable so you can run the ADB and fastboot commands from any folder. Install the ADB driver for your phone (allows you to issue adb commands to your phone when USB is plugged in) by plugging in your phone and going to device manager, find your phone which should show up as a exclamation point, right click update driver, click "browse...", then "let me pick...", click top entry something like "show all", and then let the list populate. On the left look for "samsung" and then select the first one that is something like "samsung adb driver interface". And you should be good to go.
Sorry for the long winded post, I just like to try and explain as much as possible.
Successfully Recoverd data
Well My Samsung S2's Screen broke down few days ago.. Now i have retrieved the data by following the 2nd method in the following article..! I Hope this works for you aswell...
I can not Post the link here.. PM me if you want the link...!
Hi.
It's been some time since i tried fixing my Asus Transformer...
The problem is : If it has battery life. It boot's and gets stuck on the first screen.
With the logo "eee pad" .
If i turn it off, it automaticly reboots and gets stuck in the same screen.
If i try to get into recovery mode.
Vol down, Powerup... and the vol up , i can see the few line's of code , saying it will boot into recovery mode.
but while trying to start recovery mode the icon changes to a fallen android and an "! triangle above it
I've been looking around forums evrywhere but i cant find a solution for my exact problem.
can anyone help?
Quickly, with the info you provided, I would think your firmware or storage may be damaged.
Can you access ADB? Sometimes you can while it boots, even if it doesn't fully boot. That would allow you to check logs and back up data.
Can you access APX? It has nothing to do with Android, it's a part of the device made by Asus to allow you to "inject" a firmware inside the device while it's in "brick" state.
If you can access ADB, you can "pull" the files you want from the device to your computer. You can see information on ADB here. Basically you install the package from google and connect the device to your computer, then run a set of commands.
If you can access APX (chances are you can unless there's hardware damage), then EasyFlasher can push a stock firmware back to the device. This will wipe your device 100% back to stock and you will lose all your files.
Lethe6 said:
Quickly, with the info you provided, I would think your firmware or storage may be damaged.
Can you access ADB? Sometimes you can while it boots, even if it doesn't fully boot. That would allow you to check logs and back up data.
Can you access APX? It has nothing to do with Android, it's a part of the device made by Asus to allow you to "inject" a firmware inside the device while it's in "brick" state.
If you can access ADB, you can "pull" the files you want from the device to your computer. You can see information on ADB here. Basically you install the package from google and connect the device to your computer, then run a set of commands.
If you can access APX (chances are you can unless there's hardware damage), then EasyFlasher can push a stock firmware back to the device. This will wipe your device 100% back to stock and you will lose all your files.
Click to expand...
Click to collapse
With my Ubuntu, if i do the command ./adb device
Then i can see a number. So the device is connected i think.
I am not sure if i can access APX, i do not yet how to test tis yet.
Is there an easy way to see / test this in ubuntu ?
DarkCloud98 said:
With my Ubuntu, if i do the command ./adb device
Then i can see a number. So the device is connected i think.
I am not sure if i can access APX, i do not yet how to test tis yet.
Is there an easy way to see / test this in ubuntu ?
Click to expand...
Click to collapse
APX mode is just a black screen, but your PC will install drivers and see the device when you enter that mode
Hold Volume up & Power until the USB connect sound appears, now you are in APX mode - there will be nothing on the screen of the transformer until you are flashing a new ROM maybe
What serial number is your TF ?
NVFlash is the quickest way to get back to 100% working stock
http://www.xdafileserver.nl/Files/A...OMS/ICS .27/NVFLASH_ICS_9.2.1.27_WW_NOROOT.7z
*Detection* said:
APX mode is just a black screen, but your PC will install drivers and see the device when you enter that mode
Hold Volume up & Power until the USB connect sound appears, now you are in APX mode - there will be nothing on the screen of the transformer until you are flashing a new ROM maybe
What serial number is your TF ?
NVFlash is the quickest way to get back to 100% working stock
Click to expand...
Click to collapse
I tried the "hold volume up & power" when connected to my Windows PC.
I did see the "usb connection" and heard the sound.
But it says the installation failed.
my serial number of my TF is B60KAS032926
DarkCloud98 said:
I tried the "hold volume up & power" when connected to my Windows PC.
I did see the "usb connection" and heard the sound.
But it says the installation failed.
my serial number of my TF is B60KAS032926
Click to expand...
Click to collapse
NVFlash is supported for your serial number, make sure you are running the download.bat as Administrator (Right click > Run as Admin)
Remove any other USB devices from the PC (apart from your keyboard and mouse)
Connect the TF to the PC > Power off the TF > Hold Vol up and Power until USB connects, run download.bat as Admin
*Detection* said:
NVFlash is supported for your serial number, make sure you are running the download.bat as Administrator (Right click > Run as Admin)
Remove any other USB devices from the PC (apart from your keyboard and mouse)
Click to expand...
Click to collapse
Ok, i'l try that right now.
The APX driver is installed now.
i'l try NVFlash
DarkCloud98 said:
Ok, i'l try that right now.
The APX driver is installed now.
i'l try NVFlash
Click to expand...
Click to collapse
I edited my post with quick instructions
Connect the TF to the PC > Power off the TF > Hold Vol up and Power until USB connects, run download.bat as Admin
*Detection* said:
NVFlash is supported for your serial number, make sure you are running the download.bat as Administrator (Right click > Run as Admin)
Remove any other USB devices from the PC (apart from your keyboard and mouse)
Connect the TF to the PC > Power off the TF > Hold Vol up and Power until USB connects, run download.bat as Admin
Click to expand...
Click to collapse
When do i know if it's done. And is there any other thing required?
I used the NVFLASH_ICS_9.2.1.27_WW_NOROOT
and running download.bat with admin its starts a terminal.
after this is done, i see 2 lines of information on my Asus transformer. only chip Uid and Nv3P server
DarkCloud98 said:
When do i know if it's done. And is there any other thing required?
I used the NVFLASH_ICS_9.2.1.27_WW_NOROOT
and running download.bat with admin its starts a terminal.
after this is done, i see 2 lines of information on my Asus transformer. only chip Uid and Nv3P server
Click to expand...
Click to collapse
That's good, its working, you can watch command prompt I think if it stays open to watch the progress as it sends the files across, can't remember exactly, but the TF should reboot on its own when its done
It can take 10mins or more iirc so just leave it to do its thing, then it shoot boot up
The only thing I remember having to do, was once it had booted, and I manually reboot the TF, it would hang on a black screen (Only that first reboot though) holding power for around 30 seconds, then powering on normally fixed it and it never does it again, just that first boot
Might not even happen on yours, could be a fault on my TF
*Detection* said:
That's good, its working, you can watch command prompt I think if it stays open to watch the progress as it sends the files across, can't remember exactly, but the TF should reboot on its own when its done
It can take 10mins or more iirc so just leave it to do its thing, then it shoot boot up
The only thing I remember having to do, was once it had booted, and I manually reboot the TF, it would hang on a black screen (Only that first reboot though) holding power for around 30 seconds, then powering on normally fixed it and it never does it again, just that first boot
Might not even happen on yours, could be a fault on my TF
Click to expand...
Click to collapse
ok sweet, thx !
i hope it'l boot soon
after that...i'l need to root it again i think. ...but thats for later.
Now it would be awsome to let it work again.
thx again for the help
DarkCloud98 said:
ok sweet, thx !
i hope it'l boot soon
after that...i'l need to root it again i think. ...but thats for later.
Now it would be awsome to let it work again.
thx again for the help
Click to expand...
Click to collapse
You could flash the pre-rooted versions too although I think it's easy enough to root yourself these days
This is the XDA Fileserver for different ROMs if you need them
http://www.xdafileserver.nl/index.php?dir=Asus/Asus+Transformer+(TF101)
I was just reading someone else who had the same display stuck on their TF while trying to use NVFlash and they said re-downloading the ROM and trying it again fixed it
So if this fails for some reason, try another NVFlash ROM from the XDA Server
*Detection* said:
That's good, its working, you can watch command prompt I think if it stays open to watch the progress as it sends the files across, can't remember exactly, but the TF should reboot on its own when its done
It can take 10mins or more iirc so just leave it to do its thing, then it shoot boot up
The only thing I remember having to do, was once it had booted, and I manually reboot the TF, it would hang on a black screen (Only that first reboot though) holding power for around 30 seconds, then powering on normally fixed it and it never does it again, just that first boot
Might not even happen on yours, could be a fault on my TF
Click to expand...
Click to collapse
seems to still do nothing more.
sure i'm not missing the something i should add to the NVFLASH ?
DarkCloud98 said:
seems to still do nothing more.
sure i'm not missing the something i should add to the NVFLASH ?
Click to expand...
Click to collapse
NVFlash contains everything you need, ROM and NVFlash tools to install it to the TF, I've used that exact same download on mine so it should be working
Did you have any progress showing in command prompt ?
It should say something like
Deleting partition
1
2
3
4
5 etc
Then creating partiton
1
2
3
4
5etc
Then sending boot.img
sending system.img <<<<< This one takes a while
Try it a few times until you start seeing progress in CMD, if you don't see it after a few minute, cancel it again try again
There is also a Linux version of NVFlash you could try
http://forum.xda-developers.com/showthread.php?t=1123429
*Detection* said:
NVFlash contains everything you need, ROM and NVFlash tools to install it to the TF, I've used that exact same download on mine so it should be working
Did you have any progress showing in command prompt ?
It should say something like
Deleting partition
1
2
3
4
5 etc
Then creating partiton
1
2
3
4
5etc
Then sending boot.img
sending system.img <<<<< This one takes a while
Try it a few times until you start seeing progress in CMD, if you don't see it after a few minute, cancel it again try again
There is also a Linux version of NVFlash you could try
Click to expand...
Click to collapse
i see =
sending file: transformer.bct
- 4080/4080 bytes sent
transformer.bct sent successfully
odm data: 0x300d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: blob.EBT
/ 786432/1454712 bytes sent
and when it's done , the cmd closes and thats about it.
so'l best try it a few times?
DarkCloud98 said:
i see =
sending file: transformer.bct
- 4080/4080 bytes sent
transformer.bct sent successfully
odm data: 0x300d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: blob.EBT
/ 786432/1454712 bytes sent
and when it's done , the cmd closes and thats about it.
so'l best try it a few times?
Click to expand...
Click to collapse
Did the TF not reboot on its own ?
Have you tried booting it manually by holding power for 30 seconds then powering on normally ?
That all looks like its working fine, sending the files across
EDIT - I`ll upload an older version that I have saved, it has a different file structure and uses .img instead of .blob
EDIT - Try this NVFlash
http://www.portableandroid.co.uk/androidDL/new Windows.zip
*Detection* said:
Did the TF not reboot on its own ?
Have you tried booting it manually by holding power for 30 seconds then powering on normally ?
That all looks like its working fine, sending the files across
EDIT - I`ll upload an older version that I have saved, it has a different file structure and uses .img instead of .blob
EDIT - Try this NVFlash
Click to expand...
Click to collapse
I Just Tried the linux NvFlash.
and the boodloader sending = send succesfully
but the next step it says : "File not found: recovery.img"
Failed executing command .... NvError 0x4
Command failure: create failed.
I'm nog going to try the last NVversion you linked with my Windows PC
EDIT: And the other NvFlash version you linked me, does the same...after it being sent, the CMD closes and thats it
DarkCloud98 said:
I Just Tried the linux NvFlash.
and the boodloader sending = send succesfully
but the next step it says : "File not found: recovery.img"
Failed executing command .... NvError 0x4
Command failure: create failed.
I'm nog going to try the last NVversion you linked with my Windows PC
Click to expand...
Click to collapse
I think maybe the linux version is the older .img version, and the files are .blob so it can't find anything
The one I linked you is the .img windows version, hopefully you'll have more luck with that
If not, put all the .img files into the linux folder and try it that way
*Detection* said:
I think maybe the linux version is the older .img version, and the files are .blob so it can't find anything
The one I linked you is the .img windows version, hopefully you'll have more luck with that
If not, put all the .img files into the linux folder and try it that way
Click to expand...
Click to collapse
It worked !!!
By using the linux download.sh but by adding all the files in the from the windows folder that were missing.
Thank you very much !!!
DarkCloud98 said:
It worked !!!
By using the linux download.sh but by adding all the files in the from the windows folder that were missing.
Thank you very much !!!
Click to expand...
Click to collapse
Great news! Linux vs Linux did the trick
How long have you been without your TF until now? It'll be like having a new toy again I would imagine
Hi everyone. PLEASE HELP. I am trying to push the zip files into internal sdcard on Xperia S and after the command
adb push rom.zip sdcard/image
I get the following message
failed to copy 'rom.zip' to 'sdcard/image': Permission denied
How can I get the grant the permission.
Any suggestions
Thank you in advance.
You need to grant root permissions to ADB.
a)
try:
1. adb connect (wi-fi or usb)
2. su
3. adb push rom.zip sdcard/image
b)
maybe try another folder, not "image"
barabashechka said:
You need to grant root permissions to ADB.
a)
try:
1. adb connect (wi-fi or usb)
2. su
3. adb push rom.zip sdcard/image
b)
maybe try another folder, not "image"
Click to expand...
Click to collapse
Hi, thanks for response.
What happens, su does not work with adb you have to run the shell in order to get it work, but instead what I did I run
adb root
adb remount
and then I try to push it, but now I get read only file system message.
The problem with su, as soon as I run the shell to run the su it disconnects the phone and I cannot connect back to phone I gives me "device not available" although it runs su command after shell and I see the # sign.
I tried to copy to different location no luck, but I tried to copy
adb push rom.zip /sdcard/system and it went through I was like WOOW finally, but now I faced with another issue when I go to bootloader and locate the folder sdcard/system the files are not there . So again Im in deadlock.
any idea?
Thank you.
Hi. I am a noob here. So not sure if this is the right suggestion for your query. Did you try going to recovery-storage-mount sd and finally mount usb storage. Make sure your phone is connected via usb. A simialr problem happened to me wherein I couldn't access internal sd while on recovery and this worked!
Please hit Thanks if I helped
techpick said:
Hi. I am a noob here. So not sure if this is the right suggestion for your query. Did you try going to recovery-storage-mount sd and finally mount usb storage. Make sure your phone is connected via usb. A simialr problem happened to me wherein I couldn't access internal sd while on recovery and this worked!
Please hit Thanks if I helped
Click to expand...
Click to collapse
Thanks for reply.
Yes, I did try that. I have problem with that too. When I enter to recovery mode the and connect the usb cable, PC does not recognize the phone. However, sd mounts successfully, but when I try to mount usb storage in the recovery mode I do not have an option other than unmount only.
I assume that if the pc does not recognize the phone then I have a driver issue, but I do not know where to find the driver. Although I do not have any issue when I connect the phone as fastboot or just with blank screen, on these states the pc recognizes the phone, but I can not copy or see the phones file system on the pc.
Thank you.
don't know the experia specifically but does sound like it maybe a driver issue, have you tried installing from here
developer.sonymobile.com/downloads/drivers/
Sent from my GT-I9100 using xda app-developers app
beastwarden said:
don't know the experia specifically but does sound like it maybe a driver issue, have you tried installing from here
developer.sonymobile.com/downloads/drivers/
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thank you for reply. To be honest I do not remember where I got the drivers, but i'll definetly try to download from there and let you know.
Thank you.
First of all thank you guys for your time just letting you know I got my phone fixed and want share my experience. the only way I could do that I found a software which called Emma. After, with the phone hold down the volume DOWN (most people say it should be a volume up, but this is not working with this software) Emma should recognize the phone and then with few steps it will install the stock firmware on it. That's it!!
First of all thank you guys for your time just letting you know I got my phone fixed and want share my experience. the only way I could do that I found a software which called Emma. After, with the phone off hold down the volume DOWN (most people say it should be a volume up, but this is not working with this software) Emma should recognize the phone and then with few steps it will install the stock firmware on it. That's it!!
**UPDATE**
NEW VERSION
THIS RELIES ON ADB COMMANDS, SO IF YOU DO NOT HAVE USB DEBUGGING TURNED ON, OR A CUSTOM RECOVERY TO BOOT TO, THEN IT WILL NOT BE AS SIMPLE AS JUST RUNING THE PROGRAM.
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
For anyone having issues...
If you had not previously activated USB Debugging, there are several steps you need to follow in order to enable ADB
SCREEN WORKING TOUCH BROKEN NO CUSTOM RECOVERYfirst, if you can see your screen, and have access to an otg cable, plug a mouse in to the otg cable, and the otg cable into the phone. Use the mouse to enable USB debugging, or to transfer files.
HOW TO ENABLE USB DEBUGGING
SCREEN WORKING TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN NO CUSTOM RECOVERYnow things get complicated...
*The following is paraphrased from this site
1. download the custom recovery image for your device. Copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it.
I recommend clockwork mod non touch from this page
2. Power your device off and reboot your device to FASTBOOT or DOWNLOAD MODE depending on which type of device you have.
(most devices are fastboot, SAMSUNG typically uses DOWNLOAD MODE)
how to boot to fastboot or download mode
[FASTBOOT]3. Connect your device to your computer via USB and wait till you see the PC recognize the device
to check if your device is in fastboot and connected use CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot devices
you will see a list of connected devices. if not, something went wrong.
4. Launch Command Prompt and type the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot flash recovery c:\recovery.img
5. Wait for the process to finish.
6. Turn device off then boot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
[RECOVERY MODE (SAMSUNG)]USE THE INSTRUCTIONS ON THIS PAGE
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
HOPEFULLY THIS HELPS. REMEMBER TO CHECK THE FORUM PAGE FOR YOUR DEVICE IF YOU RUN INTO ISSUES. THIS ISN'T ANYTHING THE MEMBERS OF XDA HAVEN'T DONE THOUSANDS OF TIMES OVER.
Don't forget to hit "Thanks"
i'll bump this thread for those who didn't see this amazing tool, this tool is really useful, thank you very much
Hi,
Sturggling to find the .adb file as my phone shows up as a "Portable Device" any ideas?
Cheers
Thank you!
I joined just to say thank you to FuzzyMeep Two. Thanks for an awesome tool! It worked better than advertised!
:good:
Thanks again!
-th3r3isnospoon
Question
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
koperkowy said:
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
Click to expand...
Click to collapse
Yes, when it references SD Card it means the internal "SD" storage built in to the phone, not the removable one. It should work as long as ADB can connect.
Sorry for taking so long to reply, i really hope you got your pictures back.
FuzzyMeep Two said:
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
P.S. I apologize if i have posted this in the wrong place, if so please let me know.
Click to expand...
Click to collapse
Really great stuff - so simple but so effective. Cheers and thanks.
Error msg
zobes said:
Really great stuff - so simple but so effective. Cheers and thanks.
Click to expand...
Click to collapse
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
alisdairjk said:
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
Click to expand...
Click to collapse
NEW VERSION
Try this, i haven't gotten to test it, so please let me know if it worked for you, I added the option of selecting an emulator or USB device, because of your post. Hopefully it helps.
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Joeb29 said:
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Click to expand...
Click to collapse
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
joffmeister said:
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
Click to expand...
Click to collapse
I have the same situation right now. Managed to make your program work then I get the "error:device not found". My phone does show up in the computer folder(albeit not in mass storage mode), but isn't that what this program was made to work around?
My phone is a LG Optimus G with a smashed glass... The LCD still displays fine, but I'm stuck at my swipe lock because the digitizer is dead.
Thank you for your help and your wonderful program.
Thanks for this app. My girlfriend broke her screen and digitizer on her Galaxy S4. She never turned USB Debugging mode and has a lock on her screen. When using your app I get the same error when I use adb by itself which is "error: closed". ADB detects my phone but any command I use in ADB or with your app I get that same error.
Do you know how to fix this? Thanks in advance.
Thanks a lot man.
dude this tool is just amazing and does exactly what it promised. I was spending sleepless nights thinking about how to recover my data from my broken galaxy nexus and now that I have it I can rest easy. Seriously can't thank you enough for this. Just joined xda to thank you buddy.:laugh::fingers-crossed:
Getting an error "The system cannot find the path specified."
I start the recovery tool, set eh adb path successfully, and then I get this error. If I try running the recovery to pull the DCIM library I get this:
"error: device not found"
What can I do?
Thanks!
Either way this is an amazing tool, seeing how it helped some people already. :good:
Hi, Seem to have the same problem as many others, Device not found. I cant change to MTP mode on my LG G2.
I hope someone can find a solution to this problem.
Program seems amazing doh.
Hello,
This is really a great tool ! I was wondering if you could add the possibility to recover the external sd card aswell.
Device not found
Tried to recover a Samsung Galaxy S3 mini with a broken screen
I installed adb and RecoverData, run it and then get a "device not found error"
What can I do?
Amazing app. thank you so much :good:
FuzzyMeep Two said:
**UPDATE**
NEW VERSION
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
Don't forget to hit "Thanks"
Click to expand...
Click to collapse
Hi, Thank you very musch, It's so usefull for me.. :angel: