[Q] [HELP]How to get into flashmode in Xperia Neo L MT25i ? - General Questions and Answers

My phone stacked at boot screen. Now I'm trying to get into flashmode for flashing it. Flashtool says pressing the back button connect usb cable. But its not working. Please help me. I've tried volume up and down button

Fahmed789 said:
My phone stacked at boot screen. Now I'm trying to get into flashmode for flashing it. Flashtool says pressing the back button connect usb cable. But its not working. Please help me. I've tried volume up and down button
Click to expand...
Click to collapse
Hold Volume Down (vol -) instead Back key and connect usb cable. it should work!

Related

[Q] Restoring stock ROM & entering flashmode

Using CM12 Lollipop ROM and Thunderzap 4.7 kernel. I want to return to stock ROM, so I tried flashing it via both Sony PC Companion repair and Flashtool. However, no matter whether I press Vol Up or Vol Down during the boot, it always enters Recovery. Any way I could access Flashmode? Or am I missing some step I should do before attempting to flash?
1st you have to read document about flashing properly. Read twice. You must not start phone after switch off it. Just start flashtool on PC. And you have to press volume down button and insert USB cable simultaneously. Don't switch on your phone. It will led your phone into flash mode. Green light will blink once in notification light area.
Sent from my C2104 using XDA Free mobile app
zaxrider said:
Using CM12 Lollipop ROM and Thunderzap 4.7 kernel. I want to return to stock ROM, so I tried flashing it via both Sony PC Companion repair and Flashtool. However, no matter whether I press Vol Up or Vol Down during the boot, it always enters Recovery. Any way I could access Flashmode? Or am I missing some step I should do before attempting to flash?
Click to expand...
Click to collapse
You dont need to press power button
Just press the volume down
And plug ur data cable.thats it
Its doesnt boot(i guess you press power button)
Stuck on flalshmode
Hi,
I want to falsh stock rom on my Xperia L (Unlocked bootloader)
But while using flashtool I am stuck on flashmode. I tried removing phone holding vol down button and then connected to PC but flashtool is still showing the same window of connecting in flashmode
I have installed the ADB drivers correctly. dont know what to do next
When Flashtool asks to connect your device, be sure that you phone is powered off (for at least 30 seconds) then press Volume down and connect the USB cable. Release Volume button when Flashtool starts to work.
szomjas said:
When Flashtool asks to connect your device, be sure that you phone is powered off (for at least 30 seconds) then press Volume down and connect the USB cable. Release Volume button when Flashtool starts to work.
Click to expand...
Click to collapse
Tried that LED is flashing green and red but flashtool is not reading the phone
bassil.alzoubi said:
its a drivers issue u dont need the adb drivers but you need flashtool drivers so navigate to flashtool folder (c:/flashtool)
> open drives folder and install all drivers in case you want to flash another device .
if after installing the drivers still the same problem try another usb cable/port
press thanks if helped :good:
Click to expand...
Click to collapse
Tried that also still no luck....Installed drivers from C:/flashtool/drivers/.exe..... both flashboot and flashmode (both at a time and single at time also) tried to change the port and cable also(used htc cable btw) and tried in different pc also
but still no luck

[Q] [Help] Xperia z3 forgot pattern!

Hi guys, forgot my pattern password on xperia z3 D6603, tried to login with google account but it says - wrong id or password. My phone is not rooted, USB debugging off. I tried to run into Recovery mode( with volume down/up and power buttons - phone just turns on normally. Sony PC Companion doesn't work either. Any solutions for this?!
putting the phone into recovery mode via this method should work, it's odd it isn't for you:
>1. Turn off your Xperia Z3: press power key and select "power off" or press and hold power key for a few moments.
>2. Power on your device and when the LED notification lights turn on press several times Volume Up or Volume down buttons.
>3. At the end, your Xperia Z3 will be rebooted into recovery mode.
give it another try?
Edit: Derp actually tried it on mine and it doesn't work for me either. Currently pressing random buttons while starting it, maybe trial and error will yield results.
youwonder said:
putting the phone into recovery mode via this method should work, it's odd it isn't for you:
>1. Turn off your Xperia Z3: press power key and select "power off" or press and hold power key for a few moments.
>2. Power on your device and when the LED notification lights turn on press several times Volume Up or Volume down buttons.
>3. At the end, your Xperia Z3 will be rebooted into recovery mode.
give it another try?
Click to expand...
Click to collapse
I tried this several times, doesn't work, phone turns on into lock screen.
I've been trying to use Sony PC Companion, this is what happened:
try this http://forum.xda-developers.com/showthread.php?t=2253688
if not work as indicated would download a .ftf installing via flashtooll
Memoirs said:
I tried this several times, doesn't work, phone turns on into lock screen.
I've been trying to use Sony PC Companion, this is what happened:
Click to expand...
Click to collapse
Think I got it:
>Power device off
>Press and hold only the down volume key
>press and hold the power button until the phone vibrates; release power button but continue to hold volume down key.
seems to work consistently on my Z3 (Tmobile variant though I doubt it would make a difference)
Gustavo RD78 said:
try this http://forum.xda-developers.com/showthread.php?t=2253688
if not work as indicated would download a .ftf installing via flashtooll
Click to expand...
Click to collapse
The code is not working on this model (Z3 D6603), I dont think that I can use flashtool since it does not reconise my phone. It says 'Device connected with USB debugging off'.
youwonder said:
Think I got it:
>Power device off
>Press and hold only the down volume key
>press and hold the power button until the phone vibrates; release power button but continue to hold volume down key.
seems to work consistently on my Z3 (Tmobile variant though I doubt it would make a difference)
Click to expand...
Click to collapse
Just tried this, phone loaded to lock menu again :/ My phone is from three UK.
Memoirs said:
The code is not working on this model (Z3 D6603), I dont think that I can use flashtool since it does not reconise my phone. It says 'Device connected with USB debugging off'.
Click to expand...
Click to collapse
okay...
debugging is NOT necessary, the device must be switched off when using FlashTool...
https://www.youtube.com/watch?v=IaCjMvambro&feature=youtu.be
Gustavo RD78 said:
okay...
debugging is NOT necessary, the device must be switched off when using FlashTool...
https://www.youtube.com/watch?v=IaCjMvambro&feature=youtu.be
Click to expand...
Click to collapse
Hmm, there is no back button on my device, I tried to use volume down button, same charging screen pops out.
Memoirs said:
Hmm, there is no back button on my device, I tried to use volume down button, same charging screen pops out.
Click to expand...
Click to collapse
you installed the drivers?
use the down volume key (hold down the button while connecting the cable)
Gustavo RD78 said:
okay...
debugging is NOT necessary, the device must be switched off when using FlashTool...
https://www.youtube.com/watch?v=IaCjMvambro&feature=youtu.be
Click to expand...
Click to collapse
Gustavo RD78 said:
you installed the drivers?
use the down volume key (hold down the button while connecting the cable)
Click to expand...
Click to collapse
I tried to use volume down key while connecting the cable - charging screen opens.
Code:
13/042/2015 01:42:40 - INFO - - USB\VID_0FCE&PID_01BA\BH90BBXM1L Driver installed : true
13/042/2015 01:42:40 - INFO - List of ADB devices :
13/042/2015 01:42:40 - INFO - - none
13/042/2015 01:42:40 - INFO - List of fastboot devices :
13/042/2015 01:42:40 - INFO - - none
Memoirs said:
I tried to use volume down key while connecting the cable - charging screen opens.
Code:
13/042/2015 01:42:40 - INFO - - USB\VID_0FCE&PID_01BA\BH90BBXM1L Driver installed : true
13/042/2015 01:42:40 - INFO - List of ADB devices :
13/042/2015 01:42:40 - INFO - - none
13/042/2015 01:42:40 - INFO - List of fastboot devices :
13/042/2015 01:42:40 - INFO - - none
Click to expand...
Click to collapse
try another USB port
you are holding down the button while plugging in the cable?
my phone connected to my wi-fi, does it helps?
Gustavo RD78 said:
try another USB port
you are holding down the button while plugging in the cable?
Click to expand...
Click to collapse
yes, Im holding volume down button
Gustavo RD78 said:
try another USB port
you are holding down the button while plugging in the cable?
Click to expand...
Click to collapse
Memoirs said:
yes, Im holding volume down button
Click to expand...
Click to collapse
Problem solved. Thanks
same problem with z3 compact
Memoirs said:
Just tried this, phone loaded to lock menu again :/ My phone is from three UK.
Click to expand...
Click to collapse
hi everybody
after getting marshmallow I had encountered big problem with proximity sensor
so I decided to get back to lollipop
unfortunately I forgot to enable USB debugging mode and got into boot loop and Sony logo just out there
I tried every possible way on the internet
rooting , flashing without system.sin , flashing recovery , fast boot options
and finally I found one and problem is solved
1 - getting an older flash tool (like 0.9.18.5 worked for me )
2 - changing tft file and get another firmware
hope this help anyone and happy this problem had gone .
thanks xda members :fingers-crossed::fingers-crossed::good:

Brick problem?

Hi, i have little problem with my Xperia L.
I installed some sh*t via flashtool and my phone won't turn on. When i try by pressing power button phone just vibrate then nothing happen. Red led light when chariging or connecting to PC (not blinking). I tried repluging battery and power+volup(voldown not working ;c) but it doesnt help,. Any ideas?
Phone reacting to "Reboot device into system" in flashtool.
Sorry for bad english.
Somehow i entered Fastboot mode by pressing volup after connecting to PC and i installed tz4.14 via flashtool and then cm12 via recovery. Everything working fine. Sorry for problem and pls close this thread.
MrineK said:
Hi, i have little problem with my Xperia L.
I installed some sh*t via flashtool and my phone won't turn on. When i try by pressing power button phone just vibrate then nothing happen. Red led light when chariging or connecting to PC (not blinking). I tried repluging battery and power+volup(voldown not working ;c) but it doesnt help,. Any ideas?
Phone reacting to "Reboot device into system" in flashtool.
Sorry for bad english.
Somehow i entered Fastboot mode by pressing volup after connecting to PC and i installed tz4.14 via flashtool and then cm12 via recovery. Everything working fine. Sorry for problem and pls close this thread.
Click to expand...
Click to collapse
Just so you know, If you were planning to flash stock ROM you have to boot into flash mode. To access flash mode you have to hold down the volume down button.
Sent from my C2104 using XDA Free mobile app
MrineK said:
Hi, i have little problem with my Xperia L.
I installed some sh*t via flashtool and my phone won't turn on. When i try by pressing power button phone just vibrate then nothing happen. Red led light when chariging or connecting to PC (not blinking). I tried repluging battery and power+volup(voldown not working ;c) but it doesnt help,. Any ideas?
Phone reacting to "Reboot device into system" in flashtool.
Sorry for bad english.
Somehow i entered Fastboot mode by pressing volup after connecting to PC and i installed tz4.14 via flashtool and then cm12 via recovery. Everything working fine. Sorry for problem and pls close this thread.
Click to expand...
Click to collapse
if your phone still can vibrate, it's good for you
just flash rom with flashtool via flashmode (hold volume down button then plug your cable data)

Z3 Dual Bircked

Hello all. Just dont know what i must do.
Situation:
I was trying flash phone by Flashtool for update. I plug/unplug usb + pressed volume high btn and Flashtool not found it (problems with drivers). And on some time i unplug usb and try ON mobile and it no show indication/display off and etc. So i press Pwr + Vol Btn + and it started... Im try second (Not found device too) and repeat press Pwr + Vol Btn + and it not on. No Led indication, when try plg usb after 10-15 seconds windows find device but it Unknown! ( Red traingle in devices /!\ ). Flash process not was started(i think phone lived). I plug in on wall charger and want ask. It soft brick or hard? And what i can do?
Device:
Unlocked boot
Rooted
Flash on stock frimware after custom rom.
GarikIzzy said:
Hello all. Just dont know what i must do.
Situation:
I was trying flash phone by Flashtool for update. I plug/unplug usb + pressed volume high btn and Flashtool not found it (problems with drivers). And on some time i unplug usb and try ON mobile and it no show indication/display off and etc. So i press Pwr + Vol Btn + and it started... Im try second (Not found device too) and repeat press Pwr + Vol Btn + and it not on. No Led indication, when try plg usb after 10-15 seconds windows find device but it Unknown! ( Red traingle in devices /!\ ). Flash process not was started(i think phone lived). I plug in on wall charger and want ask. It soft brick or hard? And what i can do?
Device:
Unlocked boot
Rooted
Flash on stock frimware after custom rom.
Click to expand...
Click to collapse
Solved. Phone was Soft-Bricked and problem: Low Battery level.

flashmode for xperia m2 not working

i am trying to flash TWRP - 2.8.7.0 recovery to my xperia m2 . i am successful and i can install custom ROM from TWRP recovery mode but flashmode( volume down key + power key) is not working any more, fastboot mode (volume up key + power key) is working correctly. please help me i want to install factory ROM that is provided by sony but i am stuck because of unable to turn on flashmode.
thank you
Just an idea but try this, open the sim card tray and use a pin to press the red button and after that wait for 1 minute at least and first hold the volume button down and then while holding it, hold the power button too for 5~ seconds iirc. Or wait upto a minute and see if it triggers.
Delete my post pls
Isn't that you need to hold volume - and connect to usb to get in flashmode?
Sent from my XPERIA M2
ARandomIndian said:
Just an idea but try this, open the sim card tray and use a pin to press the red button and after that wait for 1 minute at least and first hold the volume button down and then while holding it, hold the power button too for 5~ seconds iirc. Or wait upto a minute and see if it triggers.
Click to expand...
Click to collapse
already tried that, it will directly go to TWRP recovery menu by pressing volume down key and power button. By holding volume down key and connecting usb it will turn on flashmode but that did not happen any more.
Dzepar said:
Isn't that you need to hold volume - and connect to usb to get in flashmode?
Sent from my XPERIA M2
Click to expand...
Click to collapse
yah but that option was not working after recovery flash and unable to turn on flashmode by pressing volume - key and connecting usb.
Does anyone know the solution to this? I'm stuck with a soft bricked xperia M2 D2303, bootloop and can't open recovery mode. Tried to connect to PC and run flashmode, but not working, I'm just getting a green blink, not the solid color for the LED.
It does run fastboot, but no flashboot. Any ideas?
PS: I have no idea what my IMEI is.
edgolub said:
Does anyone know the solution to this? I'm stuck with a soft bricked xperia M2 D2303, bootloop and can't open recovery mode. Tried to connect to PC and run flashmode, but not working, I'm just getting a green blink, not the solid color for the LED.
It does run fastboot, but no flashboot. Any ideas?
Click to expand...
Click to collapse
For the Flashmode, the green led has to blink one time. So that's normal.
And did you installed Flashmode drivers?

Categories

Resources