Database Info

[Q] Help phone is not turning on red flashes

Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.

callum123457 said:
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
Click to expand...
Click to collapse
when you connect your phone in flashmode green light should stay on (press & hold vol down then plug usb in)
it should show
"device connected in flashmode"
IF you want fastboot mode
when you connect your phone in fastboot mode blue light should stay on (press & hold vol up then plug usb in)
NOTE-it should actually do bootloops....not sure why red light

callum123457 said:
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
Click to expand...
Click to collapse
Sometimes flash tool, while flashing tells me to turn on usb debugging (although its already on). So what do I do? Wait. After ten minutes(approx), device disconnects automatically and then flashtool requests me to connect in flash mode. So I disconect my usb cable and connect it again in flash mode and voila! flash begins. Worked for me, hope it works for u too..
Sent from my Xperia E dual using XDA Premium 4 mobile app

sohailferdous said:
Sometimes flash tool, while flashing tells me to turn on usb debugging (although its already on). So what do I do? Wait. After ten minutes(approx), device disconnects automatically and then flashtool requests me to connect in flash mode. So I disconect my usb cable and connect it again in flash mode and voila! flash begins. Worked for me, hope it works for u too..
Sent from my Xperia E dual using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes thats a common mistake
on flashmode connect phone in flashmode only when asked (or like you said ...you will have to do twice)
on fastboot mode your phone has to be connected in fastboot before selecting the fastboot mode

I'm having very similar trouble, i flashed FXP CM10 a little while ago until the phone stopped receiving a signal (which has happened a few times using CM10), unfortunately the battery died before i got home to flash it again. 3 days and 7 hours later and the battery still hasn't charged, i've managed to boot into android very quickly while it's connected to a wall charger but i get nothing at all if i try and connect in flashmode or fastboot.
Is the battery dead? Is there something i'm probably missing? I figured this might go to someway with hoping the OP.
[Edit: Good news! I've plugged into USB and i can get to the battery bar with the power symbol, maybe i can get to flashmode after all!]
[Edit 2:] Noticing the phone had just enough power to get to the battery/power symbol screen, held down the volume button for about a minute till it went through that cycle and managed to get it into flashmode, installed stock and plugged it into the wall. 5 mins later i hit the power button and it's working again! Hooray!

GeoH85 said:
I'm having very similar trouble, i flashed FXP CM10 a little while ago until the phone stopped receiving a signal (which has happened a few times using CM10), unfortunately the battery died before i got home to flash it again. 3 days and 7 hours later and the battery still hasn't charged, i've managed to boot into android very quickly while it's connected to a wall charger but i get nothing at all if i try and connect in flashmode or fastboot.
Is the battery dead? Is there something i'm probably missing? I figured this might go to someway with hoping the OP.
[Edit: Good news! I've plugged into USB and i can get to the battery bar with the power symbol, maybe i can get to flashmode after all!]
[Edit 2:] Noticing the phone had just enough power to get to the battery/power symbol screen, held down the volume button for about a minute till it went through that cycle and managed to get it into flashmode, installed stock and plugged it into the wall. 5 mins later i hit the power button and it's working again! Hooray!
Click to expand...
Click to collapse
use jim34 cm10 with hsr0 kernel....FXP IS CRAP for daily use

don't connect your phone to the pc until flashtool asks you to. I get that thing sometimes when I reflash a rom or kernel
Sent from my ST21i using Tapatalk

[Q] Restoring stock ROM & entering flashmode

Using CM12 Lollipop ROM and Thunderzap 4.7 kernel. I want to return to stock ROM, so I tried flashing it via both Sony PC Companion repair and Flashtool. However, no matter whether I press Vol Up or Vol Down during the boot, it always enters Recovery. Any way I could access Flashmode? Or am I missing some step I should do before attempting to flash?

1st you have to read document about flashing properly. Read twice. You must not start phone after switch off it. Just start flashtool on PC. And you have to press volume down button and insert USB cable simultaneously. Don't switch on your phone. It will led your phone into flash mode. Green light will blink once in notification light area.
Sent from my C2104 using XDA Free mobile app

zaxrider said:
Using CM12 Lollipop ROM and Thunderzap 4.7 kernel. I want to return to stock ROM, so I tried flashing it via both Sony PC Companion repair and Flashtool. However, no matter whether I press Vol Up or Vol Down during the boot, it always enters Recovery. Any way I could access Flashmode? Or am I missing some step I should do before attempting to flash?
Click to expand...
Click to collapse
You dont need to press power button
Just press the volume down
And plug ur data cable.thats it
Its doesnt boot(i guess you press power button)

Stuck on flalshmode
Hi,
I want to falsh stock rom on my Xperia L (Unlocked bootloader)
But while using flashtool I am stuck on flashmode. I tried removing phone holding vol down button and then connected to PC but flashtool is still showing the same window of connecting in flashmode
I have installed the ADB drivers correctly. dont know what to do next

When Flashtool asks to connect your device, be sure that you phone is powered off (for at least 30 seconds) then press Volume down and connect the USB cable. Release Volume button when Flashtool starts to work.

szomjas said:
When Flashtool asks to connect your device, be sure that you phone is powered off (for at least 30 seconds) then press Volume down and connect the USB cable. Release Volume button when Flashtool starts to work.
Click to expand...
Click to collapse
Tried that LED is flashing green and red but flashtool is not reading the phone

bassil.alzoubi said:
its a drivers issue u dont need the adb drivers but you need flashtool drivers so navigate to flashtool folder (c:/flashtool)
> open drives folder and install all drivers in case you want to flash another device .
if after installing the drivers still the same problem try another usb cable/port
press thanks if helped :good:
Click to expand...
Click to collapse
Tried that also still no luck....Installed drivers from C:/flashtool/drivers/.exe..... both flashboot and flashmode (both at a time and single at time also) tried to change the port and cable also(used htc cable btw) and tried in different pc also
but still no luck

Miro bricked after flashing wrong bootloader

Hi,
I don't know what can I do now, perhaps noting. I accidentialy flashed wrong bootloader (from other xperia, not Miro). Now phone seems to be completly bricked, I can't turn it on and my PC does not see any new device after connecting phone to usb. I also tried to remove and insert battery, after this when trying to power on, there is short vibration and nothing more.
Do you have any ideas? Or I simply should to use it as brick, not as phone or put it to my toilet and wash? Thanks.

Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303

Don't worry, Your phone is not hard bricked. As you mentioned that on starting , phone is vibrating that means there are chances to recover your phone.
1.First go through this guide :Using Flashtool for Xperia devices
2.Download your current stock firmware . Visit this: Miro all official firmwares
3.Install proper drivers as mentioned in the above 1.flashtool guide.
4.Flash the firmware for your phone , according to the above 1. Flastool guide.
5.Wait untill flashing completes. start your device when you are told to do so.
Good luck :good:

Dzepar said:
Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303
Click to expand...
Click to collapse
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.

giaur said:
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.
Click to expand...
Click to collapse
You should see green light. Try this :
Pull out battery, hold power button for 10 seconds without battery. Reinstall battery, hold volume button - and connect to usb. Then follow steps that prateek.invasion gave you.
The point is you can flash ftf and restore your phone.
Good luck.
Sent from Xperia M2 D2303

Thanks, I will try. Batteery is not charging, so I need to do this quick, it was not fully charged.

Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?

giaur said:
Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?
Click to expand...
Click to collapse
I had the same issue with my xperia e after I unlocked the bootloader and installed CWM, the phone just rebooted itself at boot up. If you have installed CWM I suggest you to install a custom rom and a new kernel. That worked for me . Or ofc, if you have warranty you can send it to them. They won't be able to tell if you installed another rom since the pc doesn't recognize the phone.

I don't have cwm... trying to connect to computer with volume down pressed. After this led starts flashing red and computer can't see any device connected
Seems there is no any recovery or I can't put it to recovery mode.

Sony Xperia Z3 HARD BRICKED

Hi. My device is hardbricked. I see no lights while charging. Flashtool doesn't see my device.how can i fix this?
Edit:Easily fixed it.I plugged my device into the computer.I entered platform-tools and flashed boot.img.I saw "waiting for device" And i pressed volume up and power buttons. Suddenly boot flashed and i recovered my phone

You are very unlikely to have hard bricked it unless you have unlocked the boot and flashed something wrong.
If you did this please help us help you by telling us what you did just before this happened.
Also, just leave the phone on charge (Wall charger) for 24 hours and then see what happens.
In the mean time read this

solution for no LEDs no response no fastboot devices.
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.

Fastboot remote command not allowed SOLVED
stevenmanzano said:
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Click to expand...
Click to collapse
Hello
I had the same problem with REMOTE COMMAND NOT ALLOWED till i managed to solve it.
1st thing you need to clean that ANDROID folder you made on C: drive.Install all from the begining including flashtool.Boot windows to install unsigned drivers.In the flash tool folder youll find the driver downloader,just enable usb debugging and choose Mass Storage not MTP .; You have 4 options usb debug on/off and usb connectivity MTP or Mas Storage ;with every version selected connect and disconnect from pc with flashtool running.
When you use Fastboot start the flashtool and close it if it cant kill ADB (that assuming you succeeded in installing drivers).
Good Luck

Please tell me D6603 testpoint

bgbgtbvan said:
Please tell me D6603 testpoint
Click to expand...
Click to collapse
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54

john abruzzi said:
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
Click to expand...
Click to collapse
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??

mihir762000 said:
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
Click to expand...
Click to collapse
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.

Omario-242 said:
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Click to expand...
Click to collapse
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???

mihir762000 said:
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
Click to expand...
Click to collapse
The green led indicates flash mode so the problem is probably on your PC not detecting it properly. Does it show up in the system manager of windows if you plug it in at all? (Like a new device/android with a yellow triangle)
You could also try to fastboot a recovery and flashing a ROM from there. Not sure if it works but that's what I would try.

i m not even able to fastboot a recovery ...tried twrp and cwm both of them...

Me too

in my phone after charging 24h, only the red LED blinks, this is not normal any suggestions?
--------------edit
ok another week and still nothing
maybe I'll describe the problem:
I wanted to upload clean soft 5.1.1 and flash it
after the phone turned off it's start in recovery i used zip with SU and the phone turned off with no respond i try too reset (vol- + vol+ + power) but no reaction
there were no three vib
so I found that you have to reset the button under the sd flip
after this treatment you already know the charging of 3 days and only the red LED blinks
So any suggestions??
|

I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?

ibo90p said:
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
Click to expand...
Click to collapse
Like you I have a Xperia Z3 mines the 6633 variant.. Signs were showing it to be hard bricked, for example:
No led charge indication!
No power led!
No fastboot leds!
No USB detection sound when plugging into windows.
Literally a Z3 that was essentially a glass brick I bought off ebay for £6.50 GBP for spares/repair.
Since I had a bricked device, I had nothing to loose.
I applied heat to the rear glass with a hair drier & removed the panel, I removed the battery ribbon cable & plugged in via USB only to find the phone would show LEDs so put it on charge.
The Z3 now goes into flash mode, so then re-flashed a stock ROM from flashtool. I did a apps log & user data wipe, cust reset & fota reset.
To date I have no idea why the phone would not take a charge before or even detect via USB, though Id say give this method a go, you may be surprised!!
Good luck

Xperia xz does not enter flashmode help :(

Hello, this is my first publication...
A few days ago I made the update of my terminal, from version 6.0.1 and I can not flash version 7 from flashtool, everything worked fine, after flashing the computer was up to version 7.1.1, after a few days observe Which at the time of downloading and connecting the computer started with constant restarts or bootloops, until you can turn it on, also the computer occasionally has problems with the speaker, plus flash failure does not turn on ...
All this happened after flashing it
I can not enter the flash mode, pressing the volume button -, the phone turns on the green light and turns off and on again and is not detected by the computer, I would greatly appreciate the help!
Please

- do a hard power off: VOL+ and Off
- do a factory reset
- plug the USB cable to another port
- reinstall USB drivers
- try another cable
- try another PC

DHGE said:
- do a hard power off: VOL+ and Off
- do a factory reset
- plug the USB cable to another port
- reinstall USB drivers
- try another cable
- try another PC
Click to expand...
Click to collapse
Thank you for responding to my post.
- from the hard power off: VOL + and Off
I do it several times, and still nothing
- from the factory reset
It is restored by the sony configuration and neither does the equipment works normal except for the LED flash of the camera, and sometimes the problem of the mentioned speakers
In addition to proving in 3 different computers, with two different cables in addition, installing the drivers and everything, I do not know what else to do, when I connect the phone with fastboot is recognized, or through trasnferencia, there is no problem with that, only the flashmode .

I have the same problem with my XZ but found a workaround. When prompted to turn of your phone and plug it in flash mode reboot the phone instead. When the screen goes black hold the volume down, when the phone turns back on it will go into flash mode. Works for me every time.
Sent from my F8331 using XDA-Developers Legacy app

dachao said:
I have the same problem with my XZ but found a workaround. When prompted to turn of your phone and plug it in flash mode reboot the phone instead. When the screen goes black hold the volume down, when the phone turns back on it will go into flash mode. Works for me every time.
Sent from my F8331 using
Hello, Thanks for replying, try the mentioned method and still flashes the green LED when connecting it in flash mode ...
According to what you said should you restart the phone connected to the usb cable?
Click to expand...
Click to collapse

eduardoamm said:
dachao said:
I have the same problem with my XZ but found a workaround. When prompted to turn of your phone and plug it in flash mode reboot the phone instead. When the screen goes black hold the volume down, when the phone turns back on it will go into flash mode. Works for me every time.
Sent from my F8331 using
Hello, Thanks for replying, try the mentioned method and still flashes the green LED when connecting it in flash mode ...
According to what you said should you restart the phone connected to the usb cable?
Click to expand...
Click to collapse
Yes, connect the phone to the usb cable and restart. It works for me every time.
Sent from my F8331 using XDA-Developers Legacy app
Click to expand...
Click to collapse

dachao said:
eduardoamm said:
Yes, connect the phone to the usb cable and restart. It works for me every time.
Click to expand...
Click to collapse
Still not working, I do not know what I can do to make it work ... thanks for responding
Click to expand...
Click to collapse

Strange enough I reproduce this "flashing green-led" flashmode issue today, but it was the USB cable problem (type c -> type c).
The cable in question can access mtp mode and fastboot mode normally thou.
It is likely not the same issue like yours, but still very strange.

eduardoamm said:
dachao said:
Still not working, I do not know what I can do to make it work ... thanks for responding
Click to expand...
Click to collapse
Was solved your problem?
Click to expand...
Click to collapse

eduardoamm said:
dachao said:
I have the same problem with my XZ but found a workaround. When prompted to turn of your phone and plug it in flash mode reboot the phone instead. When the screen goes black hold the volume down, when the phone turns back on it will go into flash mode. Works for me every time.
Click to expand...
Click to collapse
For me on Xperia Z5 too!! Thanks!!
Click to expand...
Click to collapse

same problem can not enter flashmode but can enter fastbootmode....

I have the same problem.
I've found that my phone does not enter flash mode at the first Led flash, so plug the cable while hoding volume up (fastboot mode), if the led just flashing blue then I hold volume down to get into flash mode. else if it connected in fastboot mode then i just unplug it and do again.

Thanks for the tip! Works well with my Xperia XZ + Lenovo T460 + Aukey USB cable combo.
Had a headache with phone not entering the flash mode. Flashtool said it's connected in recovery mode, usb debugging off. Perhaps sth to do with trying to update the TWRP to the latest version (3.2.2) via the PlayStore app and turning the recovery non-functional. I wanted to update to the latest FW before reflashing TWRP in fastboot mode.