Hello Ive got a bit of a problem actualy a few with my pipo U1 Pro
I installed CWM V6.o.3.1 and rebooted fine, pipo boot image was normal, then i installed from ext SD card Decontaminat V3.1
after install the screen was Split at 2/3 and touch orintation was off with buttons in wrong corners
so i read alot found change in build.prop (ro.sf.hwrotation=270) from 270 to 0 and reinstalled form ext sd card
all it fixed was position of touch screen the image of ui was still split 2/3 and out of rotation.
i reinstalled CWM fron ext sd card reboot ant the cwm recovery is straigt on the vertical and the android shows in center of screen, but ther is a fine line showing where the screen was split in the os.
after reboot the os is still split 2/3 image i have to us the show touch function to navigat the touch field to make thins work
i had TNT pipo u1 pro.img installed before and was rooted worked fine but latly had a few minor problems with it so i desided to chand up a bit.
second problem is i cant get ADB , android studio or rkbatch tools to find my tablet, usb debugging is on, tried the load from adb sideload function in cwm
im running linux mint 17 added udev.rules rebooted every thing many time s swapped usb plugs cords you name it.
as it is the tablet works but the ui is buggered up and touch is off
any help would be verry appricated
mike
Hi there,
I'm sorry but I can't find anything related to your question/device:
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
Hello,
I have a Samsung Note Tab 8, China version so it does not have Download Mode so I may be able to root it and install a custom ROM neither can upgrade the Android version to a later Android version. As far as I explore, the tablet has a Fast Boot mode where I can send commands via CMD from Windows 8. Tried to flash a ROM using ADB, but CMD says there is no device attached to the laptop. I am very stuck, and the tablet entered in LOOP when you boot it. Also the tablet has a Factory menu but is in Chinese and I do not understand a thing from that menu. As stated, Android version was 4.2.9 and the tablet model GT-N5100 according to About section of the tablet.
Is there any way I can make it work again ?
PS: All this started when I saw that the Android shown that out from 16 GB of storage, I was able to use only 4, and after I installed 4 or 5 applications the OS told me that I do have insufficient storage to install another app.
Regards,
Cosmin
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Danke !
Hello,
I got a so called "Lenovo K3" that turned out to be a clone... trying to get rid of some annoying Chinese apps, I used Uninstaller app. I accidentally froze a system app and found out I cannot unfreeze it without purchasing the PRO ver. The thing is ever since that I cannot install any new apps (I get ERROR 110) or even copy it to the system folder....
Another stupid thing I did was to restore it to "Factory Settings" chnging nothing of thr problem but loosing all of my already installed apps!!!!
I did that after trying to follow a procedure by someone who apparently had same situation, he resolved it by rebooting to recovery using ADB and then copying the "DefaultContainerService.apk" to the System/app folder
I manged to use ADB but once the phone booted to recovery mode I lost connection (USB) and nothing I did helped.
SO-
I have a Chinese phone not sure if the CPU is MTK 6589 or 6582 , 512MB , 960*540 ( I remember the details from when I had an info app)
I cannot install anything (Error 110)
I cannot connect using ADB while in recovery mode
I cannot copy to System folder (Permissions)
I have no idea which ROM I can use to flash it and I was not able to connect to it when it is OFF (Only when running)
I have no apps on it execpt some basic apps
I think it is still rooted if Factory reset did not change that
Mmmmmm any ideas???
Thanks!
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hello,
I received a so called "Lenovo K3" that turned out to be a clone... trying to get rid of some annoying Chinese apps, I used Uninstaller app. I accidentally froze a system app and found out I cannot unfreeze it without purchasing the PRO ver... The thing is ever since that I cannot install any new apps (I get ERROR 110) or even copy it to the system folder....
Another stupid thing I did was to restore it to "Factory Settings" changing nothing of the problem but loosing all of my already installed apps!!!!
I did that after trying to follow a procedure by someone who apparently had same situation, he resolved it by rebooting into recovery using ADB and then copying the "DefaultContainerService.apk" to the System/app folder
I manged to use ADB but once the phone booted into recovery mode, I lost connection (USB) and nothing I did helped.
SO-
I have a Chinese phone not sure if the CPU is MTK 6589 or 6582 , 512MB , 960*540 ( I remember the details from when I had an info app)
I cannot install anything (Error 110)
I cannot connect using ADB while in recovery mode
I cannot copy to System folder (Permissions)
I have no idea which ROM I can use to flash it and I was not able to connect to it when it is OFF (Only when running)
I have no apps on it except some basic apps
I think it is still rooted if Factory reset did not change that
Mmmmmm any ideas???
Thanks!
Is there a way to get system configuration using ADB?
Since no one answers, guess my only way out is to flash.. and since it is a clone with fake specs, I must know exact configuration so I can find a suitable rom, right?
Still waiting desperately....
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Well here I have a wonderful problem, I have two devices, according to the working one and cpu z:
4x ARM cortex A9 @1.42 ghz
revision r3p0
Rockchip RK3066
Model rk3188
Manufacturer Zowee
Android version 4.4.2
bootloader unknown
java vm Dalvik 1.6.0
kernel 3.0.36+ (eng.candy.20150403.110733)
The device that has the problem is the exact same model and all, however, after plugging it to the AC current, it tries to boot up but enters into recovery mode, none of the options work at all, looking into youtube I found out that I can extract the firmware, so far so good, but, I can't use that method because RKROMDUMPER and RKAndroid_v1.29 need the tablet to be plugged and there is the problem, the faulty tablet does not load in that mode while plugged to the computer.
So I was left with the option of getting into recovery mode and attempt to update from external storage, so far the only "Firmware" or "ROM" I've got is the one I extracted from the working tablet, I have, backup.img, boot.img, kernel.img and so on, the biggest one is the system.img which is near 6GB size.
I really don't know how to proceed from this point, do I have anything usable with those .img files? I have tried downloading a 4.4 Android rom, the recovery tried to load the files contained in the zip folder yet the loader showed messages such as, bad footer, or invalid image or always a denial message of whatever sort you may imagine.
So, I am stuck, reading further more I discovered that there are other methods or even other roms that can be loaded, but the Zowee guys have near to nothing to work with.
Could you please help me with this? Are the .img parts usable or in some way "joinable" like merge them into a single file or directory?
The device was not rooted, so I am left with only the chance of fresh installing from sd card and nothing else.
Thanks in advance.
Hello and thank you for using XDA Assist,
please create an account and post here:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Teclast x98 plus (c2d6) dual os booting problem
I FOUND THE BIOS FOR THE TECLAST X98 PLUS II C2D6 FROM http://chinagadgetsreviews.com BUT, AS PER THE GUIDELINES THE UPDATE MUST BE FROM THE WINDOWS MODE, IS THERE ANY WAY TO UPDATE THE BIOS IN ANDROID OR TWRP MODE OR ANY OTHER MODE
apparaoadari said:
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Click to expand...
Click to collapse
Greetings and welcome to assist. This is for another model but the guide should work if you swap files
https://forum.xda-developers.com/x98-air/help/unbrick-bios-softbrick-x98-air-3g-id-t3285191
Good luck
Sawdoctor