Hello,
I have a Samsung Note Tab 8, China version so it does not have Download Mode so I may be able to root it and install a custom ROM neither can upgrade the Android version to a later Android version. As far as I explore, the tablet has a Fast Boot mode where I can send commands via CMD from Windows 8. Tried to flash a ROM using ADB, but CMD says there is no device attached to the laptop. I am very stuck, and the tablet entered in LOOP when you boot it. Also the tablet has a Factory menu but is in Chinese and I do not understand a thing from that menu. As stated, Android version was 4.2.9 and the tablet model GT-N5100 according to About section of the tablet.
Is there any way I can make it work again ?
PS: All this started when I saw that the Android shown that out from 16 GB of storage, I was able to use only 4, and after I installed 4 or 5 applications the OS told me that I do have insufficient storage to install another app.
Regards,
Cosmin
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Danke !
Related
A friend of mine that I gave a tablet to left it in a hot car and now it is bootlooping. She has a bunch of photos and documents that were written on the tablet that she would like to get back. The only trouble is that this tablet is one of those Chinese Action ATM7029 clones with little to no information on the internet about them. I figured out the combos to get into the stock recovery and do have access to SD cards to load recovery images onto it. ADB bridge / debugging was never turned on in the tablet so going into recovery does not create an ADB link. Here are the details:
Device: FastTouch 10" 8gb
Android: 4.2.2
Processor: ATM7029
Memory: 8gb flash / 1gb ram
ADB Enabled: No, USB Debugging was never turned on
Recovery: Accessible, but only stock version
SD Slot: yes, 8 and 32gb SD Cards are available to be used
Computers and Operating systems: I have a Mac with 10.8 with ADK 'installed', access to a windows 7 machine available
(Amazon link to the device: amazon_com/gp/product/B00ECKG0XK/)
Here is what I have done:
1) Got into recovery
2) Tried wiping cache and rebooting, still stuck
3) Tried ADB from a Mac machine, not recognized (ADB was not turned on in tablet)
4) Looked for any sort of recovery for the device. Sketchy possibles, no direct compatible found
5) Posted here.
Here is what I want to do:
1) Get the files off (if possible)
2) Get the device working, even if that requires wiping the files out (if possible)
Can anyone point me to a CWM or TWRP that would work with this device and let me form an ADB link to backup with? Even if the recovery ran out of ramdisk and didn't install that would be enough. I really want to get those files back out before doing dastardly things to the device. Thanks in advance for any help that can be provided.
Hi!
I can find nothing useful about that device on XDA. It is possible its suffered a hardware failure from the extreme heat and may be unrecoverable.
However, Please ask in the following general thread. Perhaps you will find some help.
>*Android Development and Hacking*>*Android Q&A, Help & Troubleshooting
Good luck!
KJ said:
Hi!
>*Android Development and Hacking*>*Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
Thanks for the advice. I wondered if I should post it there first. Will anyone be mad if I just copy paste that over?
hhocker said:
Thanks for the advice. I wondered if I should post it there first. Will anyone be mad if I just copy paste that over?
Click to expand...
Click to collapse
That's exactly where I would post your question. ?
Hope you find answers.....it can be a challenge on obscure devices.
First things first, I'm completely new to the world of android and tablets so please be gentle.
I bought 2 Nobis NB09, one for myself and one for my wife, we've had them for about 2 weeks now. We bought 32gb Ext. SD cards for them and away we went. A few days ago we started to realize that nothing was being saved to the ext sd cards and we were out of space on the tablets. So off to Google I go to find a solution. The only solution I could find was to root the tablets and here starts the problem. I tried the Kingo route, that didn't work saying no device was found, RootMaster the chinese program didnt work, VRoot has a Trojan virus attached so my antivirus wont allow me to install it, Framaroot also didn't work as my device is not compatible. The SDK route also doesn't work, as no device is found. Here is what I have observed, inbetween trying to not rip my hair out or bash my head against the wall. When I plugged my device into my laptop with USB debugging on, MTP USB device driver didn't install and neither did the Android driver. Trying to manually update Android in Device Manager it says i need to get the driver from the manufacturers website (which I cant find), I could not find the MTP USB device listed in my devices at all. I did find a site that has the drivers, supposedly, but I don't even know what I need exactly. So here are my questions:
Can I not root the tablets because these drivers are missing?
If I have to have these drivers does anyone know where I can find them, reliably?
Has anyone successfully rooted this tablet and if so how did you do it?
Tablet Info:
Model Num: NB09
Android Version: 4.1.1 (Jellybean)
Kernel Version: 3.0.8
Build Num: JR003C. 2013926. v003
Processor Speed: 1.50 GHz
Please help, all we want to be able to do is store stuff on the SD cards.
Hi there,
I founded only the thread bellow where is talking about Nobis Tablet:
Nobis NB09 Tablet?
You can ask there, or ask in the general forum for Q&A:
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Asus Iconia B1. I went to modify a file in system and set the mount option on Es File explorer. Modified the file and forgot to do the mount bit again. Booted and it locks on boot 'Iconia' screen.
I can boot into recovery and see the 3 menu options for Clean boot etc, but none of these have resulted in anything. Unfortunately I do not have a rom on the tablet either to try and install anything else?
I have tried via windows 7 to connect via adb, but the tablet can't be seen? I'm sure the correct drivers should be on, but nothing? kill-server, start-server, devices always brings up nothing?
Can anyone please help?
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts but first you must register an account on XDA forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
I did register and posted (apparently in the wrong forum), so the Mod moved it here?
Please advise?
No you posted in the right forum I gave you above here: [Q] Broken tablet in recovery. Cannot connect USB from windows
Please wait an answer there.
Thread closed, thank you.
Hello,
I got a so called "Lenovo K3" that turned out to be a clone... trying to get rid of some annoying Chinese apps, I used Uninstaller app. I accidentally froze a system app and found out I cannot unfreeze it without purchasing the PRO ver. The thing is ever since that I cannot install any new apps (I get ERROR 110) or even copy it to the system folder....
Another stupid thing I did was to restore it to "Factory Settings" chnging nothing of thr problem but loosing all of my already installed apps!!!!
I did that after trying to follow a procedure by someone who apparently had same situation, he resolved it by rebooting to recovery using ADB and then copying the "DefaultContainerService.apk" to the System/app folder
I manged to use ADB but once the phone booted to recovery mode I lost connection (USB) and nothing I did helped.
SO-
I have a Chinese phone not sure if the CPU is MTK 6589 or 6582 , 512MB , 960*540 ( I remember the details from when I had an info app)
I cannot install anything (Error 110)
I cannot connect using ADB while in recovery mode
I cannot copy to System folder (Permissions)
I have no idea which ROM I can use to flash it and I was not able to connect to it when it is OFF (Only when running)
I have no apps on it execpt some basic apps
I think it is still rooted if Factory reset did not change that
Mmmmmm any ideas???
Thanks!
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
I actually have several errors here that I need help with.
1. Superuser is telling me to update the binary and giving me two options. Cancel and Recovery Install. The first does what it says but the second brings up an error message, which says,
"There was an error installing Superuser. Please send a log of the error to the developer. "
I click OK and check the log file, but its empty.
2. The file manager tells me that I cant extract the UPDATE-supersU-.zip that I pushed from my computer because I don't have root access.
3. The app Device Control doesn't register that my device is rooted and thus will not function at all.
4. The screen will turn on immediately after timing out. The phone isn't set to be always on.
5. The only way I can boot into twrp recovery is through the app Flashify.
If someone out there helps me it would be much appreciated because my tribute is my only phone and I need it to function
Hi there,
I'm sorry but I can't find anything related to your question/device except this thread: [Q] Anyone interested in LG Tribute development?
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Later edit: I see you already founded the right place for this question here.
Thread closed.