Database Info

[Q] disgo Tablet 7900

I've recently bought a disgo Tablet 7900 to have a cheap tablet to play with. In overall, I am pleased with it, however I want to do the following:
Connect to an ad-hoc network using wifi
Install Android Market
For the first option, I think I need root access. I found some topics on the internet which stated Android can connect to ad-hoc wifi networks when modifying 2 files.
However, I cannot find any information on how to get root access on a disgo 7900 tablet. I've tried some "one-click rooting application" such as z4root and Universal Androot, however had no success.
The device runs on Android 2.2 (Froyo) and has 2 micro-sd slots, an ethernet port, 2x USB port, mini-HD port and a 3.5 mini-jack for headphone.
So no mini-usb for connection to a pc.
Anyone had any success on getting root access with this device? Or can point me in the right direction?
Thanks in advance!

Gustavolis said:
Anyone had any success on getting root access with this device? Or can point me in the right direction?
Click to expand...
Click to collapse
Welcome, the XDA community is about development. There are several other sites that might be able to specifically address your specific questions and issues.
Posting a message at one of the sites, noted below, more suited to user assistance will probably lead to a quicker resolution. Answers that may apply are already posted! If possible search first.
Your tablet is closely related to the Sylvania 10-inch Magni Tablet - SYTAB10MT (SYNET10LP), where on the androidtablets.net Sylvania Tablets Forum there is a detailed description of multiple root methods and the steps to add adhoc gathered from the xda-developers Android Ad-hoc support hack/wpa_supplicant - xda-developers thread.
There are three (3) forums dedicated to Technical Help for the various models of Superpad's, a similar infoTMIC powered tablet, at apad.tv Main-Forum.
The is one (1) dedicated sub-forum and one (1) Unlisted InfoTM forum in the Infotmic subforums at SlateDroid.com.
There are also the Sylvania/Disgo 6000/AIRIS and Infotmic Based discussions at androidtablets.net of which many of the issues/solutions could apply to your tablet.
As xda pulls users from all over the world, here are a few International discussions as well regarding the 10" infoTMIC powered tablets all of which have similar issues therefore the solution approach are often applicable.
There at several forums related to devices at the Russian - 4PDA
Since the tablet is also closely related the to some models of the Flytouch there are several Spanish discussions on-going at Tabletsmania
Portugal's adroidPT APAD forum has a few discssuion's of the SuperPad.
Finally, there is a post about the specific Hardware ID's "hwver" and how to match it to the appropriate InfoTMIC Update Wrap files described in infoTMIC Hardware ID's "hwver" and updates (*.ius) which provides some additional links that will get you well on your way to resolving your issue.
Good luck

Hi there
I need to reactivate this topic. I just bought a used Disgo 7900 and upgraded it to Gingerbread 2.3.3 from their website. Since this is Chineese tablet there is no Android Market and other usefull aps installed. I tryed different versions of the market apk's but none works. All do crash.
Code:
Modell: disgo7900
Android: 2.3.3
Kernel: 2.6.35.7 [email protected] #76
Build: GRI40
The problem is, that I can't get it rooted. Gingerbreak does not work. It is trying and trying for hours but without success. There is no "Development"-Menu for activation USB-Debugg - but I installed a USB-Debugg-App for activatiing it.
It seems that the device has a different bootloader. When accessing the recovery mode by pressing "home" - "back" - and "power" it starts automaticly loading a recovery image without having a chance to choose custom files.
The device seems to be similar to the so called Superpad http://www.android-tablet-compariso...pare-android-tablets.php?t1=super2&t2=dis7900
I tryed severa methods form the links above - until now nothing worked. Any ideas how to root this device?
Or is there a chance to have a working custom rom?

Hello hstop,
I've also updated my device to Android 2.3.3.
I've tried to root the device with z4root, however also no luck because it's asking for USB-debugging. I am going to try the app you've mentioned and try again.
Also, no success with installing the Market-app...
Edit: Cannot find an .apk-file to install the "USB Debug"-app. hstop, can you tell me how you installed it on your tablet?

I did this !
On all DisGo tablets with 2.3.3 u need:
USBDebug_1.0.apk
https://docs.google.com/open?id=0B7Cmt_BvYmR3b2FfeGEwc0tRbUd5d0hCaC16SFVaZw
and
SuperOneClick 2.3.3
https://docs.google.com/open?id=0B7Cmt_BvYmR3MEM1LVlxOHlRNDJUNUY0TUJONUxfUQ
Some antivirus programs might show this archive as virus, it's becouse there is expolit for android to root the device.
I will do some tutorial tomorrow.
Sorry for my bad english :/

Cewl! Well done, levvvy! Cannot wait for the tutorial!
And it would be more cewler when the installation of the Android Market is included in your tutorial!

any ideas?
Hi Levvvy, did you have any luck with this tutorial? I have downloaded the above items but the device doesnt plug into the pc so not sure what to do now. thanks

Any progress with the tutorial?
Or has anyone any other ideas how to root this abysmal Tablet

[Completed] Retreive Files from Bootlooped ATM7029

A friend of mine that I gave a tablet to left it in a hot car and now it is bootlooping. She has a bunch of photos and documents that were written on the tablet that she would like to get back. The only trouble is that this tablet is one of those Chinese Action ATM7029 clones with little to no information on the internet about them. I figured out the combos to get into the stock recovery and do have access to SD cards to load recovery images onto it. ADB bridge / debugging was never turned on in the tablet so going into recovery does not create an ADB link. Here are the details:
Device: FastTouch 10" 8gb
Android: 4.2.2
Processor: ATM7029
Memory: 8gb flash / 1gb ram
ADB Enabled: No, USB Debugging was never turned on
Recovery: Accessible, but only stock version
SD Slot: yes, 8 and 32gb SD Cards are available to be used
Computers and Operating systems: I have a Mac with 10.8 with ADK 'installed', access to a windows 7 machine available
(Amazon link to the device: amazon_com/gp/product/B00ECKG0XK/)
Here is what I have done:
1) Got into recovery
2) Tried wiping cache and rebooting, still stuck
3) Tried ADB from a Mac machine, not recognized (ADB was not turned on in tablet)
4) Looked for any sort of recovery for the device. Sketchy possibles, no direct compatible found
5) Posted here.
Here is what I want to do:
1) Get the files off (if possible)
2) Get the device working, even if that requires wiping the files out (if possible)
Can anyone point me to a CWM or TWRP that would work with this device and let me form an ADB link to backup with? Even if the recovery ran out of ramdisk and didn't install that would be enough. I really want to get those files back out before doing dastardly things to the device. Thanks in advance for any help that can be provided.

Hi!
I can find nothing useful about that device on XDA. It is possible its suffered a hardware failure from the extreme heat and may be unrecoverable.
However, Please ask in the following general thread. Perhaps you will find some help.
>*Android Development and Hacking*>*Android Q&A, Help & Troubleshooting
Good luck!

KJ said:
Hi!
>*Android Development and Hacking*>*Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
Thanks for the advice. I wondered if I should post it there first. Will anyone be mad if I just copy paste that over?

hhocker said:
Thanks for the advice. I wondered if I should post it there first. Will anyone be mad if I just copy paste that over?
Click to expand...
Click to collapse
That's exactly where I would post your question. ?
Hope you find answers.....it can be a challenge on obscure devices.

[Completed] [Q] Note Tab 8 broken

Hello,
I have a Samsung Note Tab 8, China version so it does not have Download Mode so I may be able to root it and install a custom ROM neither can upgrade the Android version to a later Android version. As far as I explore, the tablet has a Fast Boot mode where I can send commands via CMD from Windows 8. Tried to flash a ROM using ADB, but CMD says there is no device attached to the laptop. I am very stuck, and the tablet entered in LOOP when you boot it. Also the tablet has a Factory menu but is in Chinese and I do not understand a thing from that menu. As stated, Android version was 4.2.9 and the tablet model GT-N5100 according to About section of the tablet.
Is there any way I can make it work again ?
PS: All this started when I saw that the Android shown that out from 16 GB of storage, I was able to use only 4, and after I installed 4 or 5 applications the OS told me that I do have insufficient storage to install another app.
Regards,
Cosmin

Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

Danke !

[Completed] HELP !! To Root a Tab..

Hi,
First of all Device specs :
Device : Quantum QPulse 100s (Not chinese, its middle eastern company)
Processor : Intel Celeron N2805 1.46GHz
RAM : 2GB
OS : Windows 8.1 Pro, Android 4.2.2 (Dual Boot)
So as the title says, i need to root my android, here goes my story...
I tried so many methods to root but was unsuccessful
Here are the points to first notice :
1. Android is a custom built android but build id matches with nexus phone ( idk why )
2.There is NO BOOTLOADER.
More on that :- The tab itself is a mini PC, and i found out it has BIOS, and in the BIOS I found 2 options,
a) EFI BOOT
b) Windows management blah something we are not interested right now.
I found out that android has an EFI boot and we can go to the EFI SHELL but i found no use of that.
3. You CANNOT connect it to a PC using a USB cable.
Ask why ? Because the tab itself is a host system and in no way can you connect a host to another host. Except maybe networking.
Now for the INTERESTING Things WE can USE :
I found a way to mount all the android partitions on the windows os and I can write to those partitions.
Now i did place supersu.apk, su, busybox to the folders they need to be, but in android terminal app it says su permission denied.
Probably some permission problems. I have tried giving chmod in terminal app and moving those files to system/bin later. But didnt work
Also no root apps, such as Kingroot, Towelroot etc are working.
Beware again - You CANNOT use USB using methods.
I need root so i can install gapps, and also because i like root.
So, I need The XDA help

Hi there,
Thanks for writing to us at XDA Assist.
There is no forum specifically for your device but you may want to ask your question with all relevant details in the general Android Q&A, Help & Troubleshooting forum.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck

waiting...
3 day bump.. awaiting any useful reply..
I dont want anyone to go deep into the device but it would be useful to tell me how to root a android, whose partition is accessible from another OS ( windows 8.1 )

Please wait for answers in the Q&A forum.
Try using the generic tools like Framaroot, Kingroot, and so on...
Thread closed / New thread created

[Completed] Help me break my Q90 9 inch Allwinner A23 Dual Core rubbish tablet

Hello all, thanks in advance for your help! I have a problem and am looking for some advice as I have tried everything I can think of.
I own this cruddy generic tablet which somehow became riddled with malware and I recently realised after a factory reset that the malware is actually pre-installed. I'm pretty sure I know what the offending applications are (one of them is even named 'popup' - well cheeky) but I am unable to remove or disable them, including through 3rd party software like AVG and Avast.
I think I need to root it so I can either get rid of the malware or install a custom rom. However all the root applications which I install on the tablet fail; when I get error messages they're usually to the effect that the tablet is not vulnerable to a given exploit. Most of the PC (Windows 10) applications I have installed have failed to recognise the tablet which suggests a problem with drivers.
I have tried these things:
- connected to the device (mass storage mode) and browsed the tablet successfully
- verified that debug mode is enabled
- installed generic google adb drivers
- uninstalled those and other drivers, then installed pda.net, allowed it to install drivers, connected successfully using pda, KingRoot etc still failed to connect.
There is one thing that sort of worked. OneClickRoot failed to connect initially (same as the others) but seemed to connect successfully when I selected the device manually (which I found by plugging in the build #).. However it's not possible to verify because it cost $40 which is probably just throwing good $ after bad and anyway I'm not willing to admit defeat yet!
Here is the spec:
Model #: Q90
9 inch
Allwinner A23 Dual Core
Android 4.2
8GB
Build #: phpq23083121891
Thanks again in advance for your help!

shaynoe said:
Hello all, thanks in advance for your help! I have a problem and am looking for some advice as I have tried everything I can think of.
I own this cruddy generic tablet which somehow became riddled with malware and I recently realised after a factory reset that the malware is actually pre-installed. I'm pretty sure I know what the offending applications are (one of them is even named 'popup' - well cheeky) but I am unable to remove or disable them, including through 3rd party software like AVG and Avast.
I think I need to root it so I can either get rid of the malware or install a custom rom. However all the root applications which I install on the tablet fail; when I get error messages they're usually to the effect that the tablet is not vulnerable to a given exploit. Most of the PC (Windows 10) applications I have installed have failed to recognise the tablet which suggests a problem with drivers.
I have tried these things:
- connected to the device (mass storage mode) and browsed the tablet successfully
- verified that debug mode is enabled
- installed generic google adb drivers
- uninstalled those and other drivers, then installed pda.net, allowed it to install drivers, connected successfully using pda, KingRoot etc still failed to connect.
There is one thing that sort of worked. OneClickRoot failed to connect initially (same as the others) but seemed to connect successfully when I selected the device manually (which I found by plugging in the build #).. However it's not possible to verify because it cost $40 which is probably just throwing good $ after bad and anyway I'm not willing to admit defeat yet!
Here is the spec:
Model #: Q90
9 inch
Allwinner A23 Dual Core
Android 4.2
8GB
Build #: phpq23083121891
Thanks again in advance for your help!
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except this thread:
[GUIDE][ROOT][TWEAKS] Generic Allwinner A23 Tablet
Try posting your query there. Experts there may be able to help you.
Good luck