I have tried almost everything. Connected tablet to win7 laptop, does not see it, connected keyboard with tablet attached does not see it (even by other USB). I have attempted to add the device with device manager with not luck ....any other ideas?
PHP:
panicfreek said:
I have tried almost everything. Connected tablet to win7 laptop, does not see it, connected keyboard with tablet attached does not see it (even by other USB). I have attempted to add the device with device manager with not luck ....any other ideas?
Click to expand...
Click to collapse
Take another USB cable. You hear often, that data line breaks. I myself have one that you can only use to charge tab.
well the cable for the tablet only works with it...i did try another usb cable from the keyboard to the computer, but no go with that either
Did you
install the Asus sync utility?
check Device Manager for any changes when you connect/disconnect the tablet?
reboot both devices while connected through USB?
uninstall all old Android device drivers from your PC, reboot and try again?
If all of the above doesn't work, try this Linux live CD: http://www.transformerforums.com/fo...t/46090-guide-adb-fastboot-linux-live-cd.html
panicfreek said:
well the cable for the tablet only works with it...i did try another usb cable from the keyboard to the computer, but no go with that either
Click to expand...
Click to collapse
You didn't understand me. I meant with 'another cable' not a different one (there is none) but a new one, because the wires tend to break (physically).
Trying to reach device bootloader via keyboard port is not possible, because on boot keyboard is not intitialised.
The crucial test:
1. Open on Win7 device manager as an admin.
2. Connect tf700.
3. Is there a 'pling' and device tree changes?
4. If not, hit F5 (refresh).
5. If there is no change connecting to any of your USB ports, you might have a physical connection problem.
Related
hi.
i have a realy annoying problem.
i cant connect my device to computer. i tried every way.
just plugging the tf to pc. no success.
enabling usb debugging. no success.
by apx. "" ""
i cant even access recovery.
i got my tf today from lab. they replaced my mobo.
and now when itry to access recovery it's just giving me a big green android with a ! inside.
so i thought. is it possible that the problem is with my usb cable?
and that i'll have to buy a new one just to confirm it?
1.) What are your computer's specifications? (OS, hardware, etc.)
2.) When the Transformer is booted into Android and you connect the USB cale from the tablet to your computer, does your computer make any sort of indication that a new device has been plugged in? (In Windows, for example, you'll get the new hardware sound.)
Hi! I have any problem tooi cant connect my transformer to PC.
I have C4Q 9550 CPU 8GB RAM Gigabyte E45P MotherBoard Windows & ult x64
When i connect my device,i have a new "hardware sound" and see baloon unknow device or USB cant recognize!What is a problem?Help!!!
TNX
Try different USB slot, Try different cable (if you can get one). Try different PC with the same OS (Win7 64-bit).
Try to reinstall Asus Sync, and USB drivers.
If it won't work after you have tried all of these, then I have no idea.
My TF works for me out of the box.
davebugyi said:
Try different USB slot, Try different cable (if you can get one). Try different PC with the same OS (Win7 64-bit).
Try to reinstall Asus Sync, and USB drivers.
If it won't work after you have tried all of these, then I have no idea.
My TF works for me out of the box.
Click to expand...
Click to collapse
Windows 7 would recognize the TF as a Media device and there in lies the problem. You would have to force the Asus Drivers to take precedence and that is the problem. I am also told you would need the '.Net' framework installed and configured properly - as I had installed this long ago I am not sure whether this is required or not as on my PC I did not face problems due to lack of '.Net'.
On Windows XP I was required to install Windows Media Player 11 and then do some more modifications etc and then install PC Sync software from Asus.
I now have my Windows 7 Ultimate, 64bit working with the TF.
When you connect your Tablet using the Charger cable, does your Tablet say something like 'Searching for PC Sync Software on PC' in the notification area?
Only if it does the TF would even be trying to communicate with the PC - otherwise it would not even be doing that.
I connected my TF to my Windows machine with the sole purpose of rooting the device and I did succeed in doing that.
Yes I know some will say install drivers or slide down the notifications.
But the problem is when I plug in, there isn't any notification for you to switch to disk drive mode.
Everything was working fine last week. There was no problems detecting my phone on my home and any PC at work. I have drivers install in my computer and can do adb commands
But now, when I plug in, it only shows the charging light.
I have done the following
On and off the USB debug option
Reboot phone
Try a 4 micro USB cable
Tried different USB slots on the computers
Use usbdeview and delete all HTC drivers and resinstall also not working
Remove my micro SD card and reinsert.
All doesn't work.
Strangely, one thing does. When I plug in the PC and I need to reboot, with my phone still plug in my PC. The notification will appear and I can do all things normally. But once I unplug and plug in again, same problem. Only can be solved with next reboot with phone plug in before hand. If windows is already loaded, it cannot be detected.
I though it was the rom. But I went to boot loader and same thing. It shows fastboot AC. If I do the reboot windows method, it will show fastboot USB .. will show fastboot AC if I replug in
I am starting to think my USB port on my phone is faulty.. any ideas?
Try plugging it and wait for a long time. Since I formated my computer it takes like 10-15min for my phone to show up after I plugged it. No idea what's causing it though.
Done that , charged it for 1hr plus, same
Best thing is try different cable, there is some issue with htc cable your pc sometime dont recognize phone, Other thing you can do it is keep ur phone connected to pc then boot your phone to Hboot or bootloader or fast boot, your pc will recognize your phone with generic driver.
jasminthoria said:
Best thing is try different cable, there is some issue with htc cable your pc sometime dont recognize phone, Other thing you can do it is keep ur phone connected to pc then boot your phone to Hboot or bootloader or fast boot, your pc will recognize your phone with generic driver.
Click to expand...
Click to collapse
hmm tried 4 cables.. same results..
Using the same cable, tried my mum's desireHD.. no problems detecting the USB each time..
Bootloader mode, it shows Fastboot AC
instead of Fastboot USB.. unless reboot my windows..
Oh i tired another micro SD card, same results.. :/
why mess with cables... AirDroid.
connect your phone to the pc via wifi.
direct link to the market: goo.gl/9YG73
but if you must connect via cable for something... have you checked the most obvious place? (sounds like you probably have but just in case...)
settings > connect to pc > default connection type
Mainspring said:
why mess with cables... AirDroid.
connect your phone to the pc via wifi.
direct link to the market: goo.gl/9YG73
but if you must connect via cable for something... have you checked the most obvious place? (sounds like you probably have but just in case...)
settings > connect to pc > default connection type
Click to expand...
Click to collapse
it cant even be detected, no notifications mate..
Flashed ROM......
Mine is doing the same thing. It didn't start until I flashed the new ROM. When in Windows, I just un-plug it, and re-plug it. Then it shows up immediately. But it always seems to show in flashboot.
UnixSlayer said:
Mine is doing the same thing. It didn't start until I flashed the new ROM. When in Windows, I just un-plug it, and re-plug it. Then it shows up immediately. But it always seems to show in flashboot.
Click to expand...
Click to collapse
hmm i even revert back to my original 1.35.707.1 RUU...
still not working.. i guess its time to claim warranty
try switching off firewall or/and antivirus i had same problem with eset 5 blocking phone so i put the stings to learning mode then plugged phone in and it created a new rule and shows up,then change setting back to what it was originally on
jonpickles70 said:
try switching off firewall or/and antivirus i had same problem with eset 5 blocking phone so i put the stings to learning mode then plugged phone in and it created a new rule and shows up,then change setting back to what it was originally on
Click to expand...
Click to collapse
and if that isn't working try it with HTC sync. which gives you the drivers of the device.
I got the same problem... any idea...
please help me..
Is there where USB cannot be recognized issue? If this is, I have a simple solution which took me forever to figure out.
I know this method sounds ridiculous, but give it a try. Unplug your charger connected to your computer/laptop and plug it in to a different outlet. Replug the USB with your phone connected, give it a sec, and it should work.
what operating system is your PC running? I was gonna say perhaps it might be a faulty USB port...
i have the same problem
What I do is go to devices and printers and then android phone then properties then hardware and disable the reenable the drivers. As soon as you reenable the drivers it should show up in disk mode. Hope this helps. This is the only phone I've had this problem with.
i'm trying to connect my shield to my computer to do some basic android development (i have an app, it works on other devices, want to test it on the shield).
my problem is, when i plug it into the computer, nothing happens. to clarify, i don't mean that the drivers don't install correctly and then i can't do anything. what is happening is actually nothing. the computer (windows 8) does not recognize anything is happening, the device manager does not see any new devices even after scanning for hardware changes.
the shield is in development mode, and has usb debugging turned on, but i don't get any response anywhere. the shield does at least appear to charge over the usb cable, but that's it. listing adb devices also provides no output.
do you guys have any idea what might be going on that the device isn't recognized on any level that i can tell?
It sounds like either the USB port or the cable you're using is faulty.
Have you tried switching USB ports, to see if it's recognized then? And have you tried using a different cable?
joshuarivera said:
i'm trying to connect my shield to my computer to do some basic android development (i have an app, it works on other devices, want to test it on the shield).
my problem is, when i plug it into the computer, nothing happens. to clarify, i don't mean that the drivers don't install correctly and then i can't do anything. what is happening is actually nothing. the computer (windows 8) does not recognize anything is happening, the device manager does not see any new devices even after scanning for hardware changes.
the shield is in development mode, and has usb debugging turned on, but i don't get any response anywhere. the shield does at least appear to charge over the usb cable, but that's it. listing adb devices also provides no output.
do you guys have any idea what might be going on that the device isn't recognized on any level that i can tell?
Click to expand...
Click to collapse
If youre just trying to connect thru adb you need the universal naked driver. If the shield isnt being mounted try a different usb port and make sure youre using the shield cable as well. My samsung cable will charge it but i cant transfer data with it.
Did this get solved?
Did this ever get solved? I have the same issue. I have tried everything everywhere has said to do with no luck.
When i connect the iwork the PC with the cable Type C it only charges
When I connect with USB 2.0 nothing happens ...
What I have to do to be able to transfer files between the tablet and the PC?
Thank you
PC Trick?
filipe_m said:
When i connect the iwork the PC with the cable Type C it only charges
When I connect with USB 2.0 nothing happens ...
What I have to do to be able to transfer files between the tablet and the PC?
Thank you
Click to expand...
Click to collapse
Greetings!
I had this issue as well, keeping track of it via Device Manager on the PC. Sometimes, it says it's the Model #, other times (depending on if you're recovering, adb debugging) it will say is "ADB Interface". I'm in need of recovery and refresh for mine, which is how I figured this part out. It's not much, but open your Device Manager on your PC before plugging it in via the 2nd USB2.0 down on the tablet. Watch it. If on the Windows side, it should pick it up as a media device or the device model number. On the Android side, if USB Debugging is on (which mine already is, thanks to the last person who had it -- I bought it from Amazon.), the charging should show up on-screen, and the Device Manager (USB Device, last one down) should see it.
I hope this little bit helped.
-- Lady Adellandra
My s22 ultra suddenly does not work on dex. Theres no way to access the sd via a pc either.
I was using this exact setup and it worked fabulously.
As far as i know i went to bed one night and it didnt work the next time i went to use dex.
Reboot phone and pc? Is the phone recognised when connected? Try another cable, does it work on a different pc. Do other USB devices connect ok etc etc
i have rebooted both phone and pc. Same cable as when it did work infact the samsung original that came with the s22. My s9+ does not connect. Both phones DO charge via usb c.
I have infact reinstalled my pc and resest my phone to factory trying to fix this.
Still to no avail.
Does it connect to another pc? Usb pc hub might have failed
its a brand new laptop and it does power the phones. and it all did work fine. i can even power my usb c vape through the same port
there is not an alternative machine to test on
actually i just thaught of this, the last night i was using it i had the standard popup on my phone asking to allow dex to run. An ok responce and cancel or not now responce, i dont remember exactly.
Could this have done something if i hit cancel
also could there be something in the pc bios i may have not realized could effect this. Since i was on the same night trying to boot to a usb linux pendrive
When you connect your phone can you access its files on your pc? Is it recognised as drive
Ok so ive even reset the bios to system defaults and tried a regular usb to usb-c and still nothing
raul6 said:
When you connect your phone can you access its files on your pc? Is it recognised as drive
Click to expand...
Click to collapse
nope
Something is wrong with pc usb hub
raul6 said:
Something is wrong with pc usb hub
Click to expand...
Click to collapse
could it have anything to do with the phone usb connection settings. When you plug in a usb otg it normally would give an option for transfer or charge etc on the phones pull down menu and all its doing is saying fast charging
Try phone on another pc
Absolutely everything else works through usb mate.
What else can you access via USB. Drives, devices?
well i can access the standard usb port with an sd card reader. read write and even installed windows off it. So this usb to usb c should work fine.
If it were just the usb c hub blown this would not be the case.
paralaxicon said:
well i can access the standard usb port with an sd card reader. read write and even installed windows off it. So this usb to usb c should work fine.
If it were just the usb c hub blown this would not be the case.
Click to expand...
Click to collapse
im currently trying to see if i can run a lubuntu through usb bootable key and try to access the usb c ports from that.
I have been reading about my laptop and apparently it has a reputation of usb issues. lenovo x1 yoga gen 2 on win 10
Solved. During a bios update it appears the bios setting for thunderbolt usb-c was changed to disabled. As soon as i discovered this and rebooted it worked so if anyone is having issues with this they may want to check there bios settings.
4 days of struggling over. Dang its nice to beat a computer once in a while.
paralaxicon said:
Solved. During a bios update it appears the bios setting for thunderbolt usb-c was changed to disabled. As soon as i discovered this and rebooted it worked so if anyone is having issues with this they may want to check there bios settings.
4 days of struggling over. Dang its nice to beat a computer once in a while.
Click to expand...
Click to collapse
Do you have Link to Windows enabled on your phone? If so, turn it off and try running DeX.