When i connect the iwork the PC with the cable Type C it only charges
When I connect with USB 2.0 nothing happens ...
What I have to do to be able to transfer files between the tablet and the PC?
Thank you
PC Trick?
filipe_m said:
When i connect the iwork the PC with the cable Type C it only charges
When I connect with USB 2.0 nothing happens ...
What I have to do to be able to transfer files between the tablet and the PC?
Thank you
Click to expand...
Click to collapse
Greetings!
I had this issue as well, keeping track of it via Device Manager on the PC. Sometimes, it says it's the Model #, other times (depending on if you're recovering, adb debugging) it will say is "ADB Interface". I'm in need of recovery and refresh for mine, which is how I figured this part out. It's not much, but open your Device Manager on your PC before plugging it in via the 2nd USB2.0 down on the tablet. Watch it. If on the Windows side, it should pick it up as a media device or the device model number. On the Android side, if USB Debugging is on (which mine already is, thanks to the last person who had it -- I bought it from Amazon.), the charging should show up on-screen, and the Device Manager (USB Device, last one down) should see it.
I hope this little bit helped.
-- Lady Adellandra
Related
i'm trying to connect my shield to my computer to do some basic android development (i have an app, it works on other devices, want to test it on the shield).
my problem is, when i plug it into the computer, nothing happens. to clarify, i don't mean that the drivers don't install correctly and then i can't do anything. what is happening is actually nothing. the computer (windows 8) does not recognize anything is happening, the device manager does not see any new devices even after scanning for hardware changes.
the shield is in development mode, and has usb debugging turned on, but i don't get any response anywhere. the shield does at least appear to charge over the usb cable, but that's it. listing adb devices also provides no output.
do you guys have any idea what might be going on that the device isn't recognized on any level that i can tell?
It sounds like either the USB port or the cable you're using is faulty.
Have you tried switching USB ports, to see if it's recognized then? And have you tried using a different cable?
joshuarivera said:
i'm trying to connect my shield to my computer to do some basic android development (i have an app, it works on other devices, want to test it on the shield).
my problem is, when i plug it into the computer, nothing happens. to clarify, i don't mean that the drivers don't install correctly and then i can't do anything. what is happening is actually nothing. the computer (windows 8) does not recognize anything is happening, the device manager does not see any new devices even after scanning for hardware changes.
the shield is in development mode, and has usb debugging turned on, but i don't get any response anywhere. the shield does at least appear to charge over the usb cable, but that's it. listing adb devices also provides no output.
do you guys have any idea what might be going on that the device isn't recognized on any level that i can tell?
Click to expand...
Click to collapse
If youre just trying to connect thru adb you need the universal naked driver. If the shield isnt being mounted try a different usb port and make sure youre using the shield cable as well. My samsung cable will charge it but i cant transfer data with it.
Did this get solved?
Did this ever get solved? I have the same issue. I have tried everything everywhere has said to do with no luck.
I have tried almost everything. Connected tablet to win7 laptop, does not see it, connected keyboard with tablet attached does not see it (even by other USB). I have attempted to add the device with device manager with not luck ....any other ideas?
PHP:
panicfreek said:
I have tried almost everything. Connected tablet to win7 laptop, does not see it, connected keyboard with tablet attached does not see it (even by other USB). I have attempted to add the device with device manager with not luck ....any other ideas?
Click to expand...
Click to collapse
Take another USB cable. You hear often, that data line breaks. I myself have one that you can only use to charge tab.
well the cable for the tablet only works with it...i did try another usb cable from the keyboard to the computer, but no go with that either
Did you
install the Asus sync utility?
check Device Manager for any changes when you connect/disconnect the tablet?
reboot both devices while connected through USB?
uninstall all old Android device drivers from your PC, reboot and try again?
If all of the above doesn't work, try this Linux live CD: http://www.transformerforums.com/fo...t/46090-guide-adb-fastboot-linux-live-cd.html
panicfreek said:
well the cable for the tablet only works with it...i did try another usb cable from the keyboard to the computer, but no go with that either
Click to expand...
Click to collapse
You didn't understand me. I meant with 'another cable' not a different one (there is none) but a new one, because the wires tend to break (physically).
Trying to reach device bootloader via keyboard port is not possible, because on boot keyboard is not intitialised.
The crucial test:
1. Open on Win7 device manager as an admin.
2. Connect tf700.
3. Is there a 'pling' and device tree changes?
4. If not, hit F5 (refresh).
5. If there is no change connecting to any of your USB ports, you might have a physical connection problem.
When I want to transfer bigger files from my computer to the tablet, via in USB cable, all the time my tablet is disconnecting from the computer - of course in progress. I experiencing this problem with Hisuit and without Hisuit on the computer. I tried to not use the tablet, when I transferring something into it, but it's the same: in progress and disconnect. I had a windows 7 pc and now with a windows 10 pc, when I use a USB 2.0 or USB 3.0 port, it's nevermind: same deal. I using the original USB Micro-B cable. My computer is not busy with other things, I do nothing with my pc & tablet when I transferring some files to my tablet. But strangely, when the transfer is stopped and my tablet somehow disconnected from my pc, I get an error message, in my pc, but I can't see the window, so I made a picture with my phone. I don't know what's the problem.
Hi,
Thank you for the forum (first post).
Trying to get the S6 recognised by pc:
When the phone is connected to the laptops usb port via micro usb and cable (usb debugging on, samsung usb drivers downloaded, mtp:usb on) the computer makes the 'plugged in' audio sound but there is no 'permission to transfer files via usb' type message.
It does charge.
Does this maybe mean the charging port is broken/damaged, or the usb is broken?
Only other detail is that I once got the computer to say in a pop up that it was labelled as a 'samsung s6' rather than unknown device, which it normally does. This any symptom maybe its just a software issue?
Trying to get my computer to connect to the phone and have tried most if not all software solutions so far (including factory reset) and now looking if its hardware. Any tips to get it connected welcome.
Thank you,
David
david7632 said:
Hi,
Thank you for the forum (first post).
Trying to get the S6 recognised by pc:
When the phone is connected to the laptops usb port via micro usb and cable (usb debugging on, samsung usb drivers downloaded, mtp:usb on) the computer makes the 'plugged in' audio sound but there is no 'permission to transfer files via usb' type message.
It does charge.
Does this maybe mean the charging port is broken/damaged, or the usb is broken?
Only other detail is that I once got the computer to say in a pop up that it was labelled as a 'samsung s6' rather than unknown device, which it normally does. This any symptom maybe its just a software issue?
Trying to get my computer to connect to the phone and have tried most if not all software solutions so far (including factory reset) and now looking if its hardware. Any tips to get it connected welcome.
Thank you,
David
Click to expand...
Click to collapse
have you gone thru the usual suspects? (diff cable, usb port, diff computer altogether, blah blah blah)
Same happens here, it was fine after flashed Rom now it wont recognize it for some reason
My s22 ultra suddenly does not work on dex. Theres no way to access the sd via a pc either.
I was using this exact setup and it worked fabulously.
As far as i know i went to bed one night and it didnt work the next time i went to use dex.
Reboot phone and pc? Is the phone recognised when connected? Try another cable, does it work on a different pc. Do other USB devices connect ok etc etc
i have rebooted both phone and pc. Same cable as when it did work infact the samsung original that came with the s22. My s9+ does not connect. Both phones DO charge via usb c.
I have infact reinstalled my pc and resest my phone to factory trying to fix this.
Still to no avail.
Does it connect to another pc? Usb pc hub might have failed
its a brand new laptop and it does power the phones. and it all did work fine. i can even power my usb c vape through the same port
there is not an alternative machine to test on
actually i just thaught of this, the last night i was using it i had the standard popup on my phone asking to allow dex to run. An ok responce and cancel or not now responce, i dont remember exactly.
Could this have done something if i hit cancel
also could there be something in the pc bios i may have not realized could effect this. Since i was on the same night trying to boot to a usb linux pendrive
When you connect your phone can you access its files on your pc? Is it recognised as drive
Ok so ive even reset the bios to system defaults and tried a regular usb to usb-c and still nothing
raul6 said:
When you connect your phone can you access its files on your pc? Is it recognised as drive
Click to expand...
Click to collapse
nope
Something is wrong with pc usb hub
raul6 said:
Something is wrong with pc usb hub
Click to expand...
Click to collapse
could it have anything to do with the phone usb connection settings. When you plug in a usb otg it normally would give an option for transfer or charge etc on the phones pull down menu and all its doing is saying fast charging
Try phone on another pc
Absolutely everything else works through usb mate.
What else can you access via USB. Drives, devices?
well i can access the standard usb port with an sd card reader. read write and even installed windows off it. So this usb to usb c should work fine.
If it were just the usb c hub blown this would not be the case.
paralaxicon said:
well i can access the standard usb port with an sd card reader. read write and even installed windows off it. So this usb to usb c should work fine.
If it were just the usb c hub blown this would not be the case.
Click to expand...
Click to collapse
im currently trying to see if i can run a lubuntu through usb bootable key and try to access the usb c ports from that.
I have been reading about my laptop and apparently it has a reputation of usb issues. lenovo x1 yoga gen 2 on win 10
Solved. During a bios update it appears the bios setting for thunderbolt usb-c was changed to disabled. As soon as i discovered this and rebooted it worked so if anyone is having issues with this they may want to check there bios settings.
4 days of struggling over. Dang its nice to beat a computer once in a while.
paralaxicon said:
Solved. During a bios update it appears the bios setting for thunderbolt usb-c was changed to disabled. As soon as i discovered this and rebooted it worked so if anyone is having issues with this they may want to check there bios settings.
4 days of struggling over. Dang its nice to beat a computer once in a while.
Click to expand...
Click to collapse
Do you have Link to Windows enabled on your phone? If so, turn it off and try running DeX.