I've read a few threads on the screen Flickering and there doesn't seem to be any resolution .
I'm on my 3rd tablet now (thanks best buy accident damage warranty!) And this one is flickering worse lately than ever. I updated to the latest firmware, yesterday only to boot up to horrible bouts of flickering during the setup screens.
The odd thing is, there seem to be no consistency to it. Some days it's so had I can't even use the thing, other days it doesn't happen at all. I use the tablet every day for notes or PDF viewing. I've used it with no magnetic cover (totally naked) and with the cover.. doesn't seem to change the occurrences.
I've turned overlays on/off force gpu render on/off.. nothing seems to fix it. Sometimes changing the overlay will reduce the flickering other times it doesn't affect it at all.
I hate to say it, but if I can't resolve it, I'm going to be forced to move to the surface 3.
I'm an electrical engineer and I've done as much trouble shooting as I can think to do.. but I've come up empty handed.
Anyone else have these problems? Has anyone found a definitive fix?
I sent mine back 3 times. The first was a reset. Thanks for wasting my time. The second was a motherboard and that didn’t do it. The third time they did a motherboard, digitizer, and usb port. It's finally stable and back to normal. After 5 trips back, the BB warranty triggers a new unit. Check if it triggers a refund.
I get it occasionally, so far I'm able to resolve it by booting into custom recovery (TWRP) and clearing dalvic to allow all apps to rebuild. Sometimes this resolves it for a few days, sometimes a couple of weeks. Its a repeatable "fix" that makes me question if the issue is related to memory or trim or something like that. Kind of reminds me of how with the first generation nexus 7s one would see slow downs after a while and filing storage with fake data then deleting it would improve performance for a while.
I'm definitely not a tender user of the device. I go back and forth between multiple ROM's and kernels on a daily basis testing what is testable, and unfortunately also what is not. Anyway, even though mine was bought as refurbished on eBay, I have never had any issues like the ones you describe. More specifically, I have never had any issues what-so-ever, that was not created due to my own ignorance. To me the device seems indestructible.
Besides, I would hate to be in the place of my device, or I would definitely have turned schizophrenic. Should I feel bad about pushing it through all this?
Because we're trying to figure out if it's related to a specific device type, which one do you have? P900, 905, 907A or another?
ShadowLea said:
Because we're trying to figure out if it's related to a specific device type, which one do you have? P900, 905, 907A or another?
Click to expand...
Click to collapse
P900 wifi. Us version bought at best buy.
Today the tablet has been rock solid, I have literally done nothing between when it was flickering like mad and now.
I wonder if it might be related to some kid of data transfer. either over wifi, or when data is written or read from storage or SD card. I've take then SD card out to eliminate that as the problem.
Mine was P900 from BB
Issue lies with the screen.
This happened with me I sent it back to Samsung, 3 times. They seem to have finally got it right. They replaced the battery and then the display screen. Now it appears to be working I will let you know after a month if it is still good. They also told me that they will not replace the device even though I bought it and the issue was right from the start. Not even 6 months old. When working the device is excellent.
Ah, so now we know for sure the battery is replaceable. That's good news. Maybe someday our batteries will no longer hold a charge and we can replace it. Now for a good video on tear down and what tools to use to do that and where to get a replacement battery. I know it's early for most of us but someday......we will have to replace that battery. I'm one of those that keep my toys (computers/laptops/tablets/phones,) for many years.
Mine is running like new since last service. Getting the BB Geek Squad warranty has paid for itself already. I get 2 years on anything over $500.
Mine is a p900. I purchased from samsung website. Mine has been doing it fresh out of box. So bummed.
Ive had my 12.2 since march and it recently started flickering. It seems to tuen of the screen for a millisecond especially when lots of refreshes happen. Like scrolling a pdf. A few days back it was bad. Now it has gotten better and I havent noticed anything.
{Diemex} said:
Ive had my 12.2 since march and it recently started flickering. It seems to tuen of the screen for a millisecond especially when lots of refreshes happen. Like scrolling a pdf. A few days back it was bad. Now it has gotten better and I havent noticed anything.
Click to expand...
Click to collapse
My P900 has just begun flickering exactly as you describe. So I should just be patient and hope it goes away by itself?
I'm flickering again. Turning the screen brighter is what triggers it for me. Returning to stock just to get it back and have it flicker again to hit the magic 5 returns may be what I have to do.
https://youtu.be/CvxbVft69Kg
I just followed this guide. Its been a week now, not had any flickering since I did it.
Manya3084 said:
I just followed this guide. Its been a week now, not had any flickering since I did it.
Click to expand...
Click to collapse
Lifting the motherboard only temporary close the gaps of cracked battery connector. The permanent fix need to do: re solder the battery connector.
Look closely under magnified glass or microscope , you'll see the cracked solders. You can test by pushing the connector slightly, a bad one will move easily or lift off from its solder joints.
This video was removed from the poster after I pointed out his guessing solution. Flickering screen has nothing to do with LCD connector on the motherboard.
Lifting mother board actually you're applying pressure on the battery connector from rear cover.
I have had my P900 sent to Samsung service twice without having the screen flicker fixed. I thought this was a known problem and that Samsung themselves should be aware of it? Maybe I should supply some XDA links next time...
Skickat från min SM-P900 via Tapatalk
bluebirch said:
I have had my P900 sent to Samsung service twice without having the screen flicker fixed. I thought this was a known problem and that Samsung themselves should be aware of it? Maybe I should supply some XDA links next time...
Skickat från min SM-P900 via Tapatalk
Click to expand...
Click to collapse
Depend on where you send for service, they know how to fix it now. Service Centers actually are contractors provide services for Samsung and others, the fact that most people don't know.
http://forum.xda-developers.com/showpost.php?p=59573206&postcount=100
It Works. Battery connector replaced. Smoooooth
After 2 visits to Samsung , my unit finally works fine.
Motherboard and LCD were changed first time. But issue persisted.
Second time, battery connector was replaced. Since then it has worked very very smoothly.
Beut said:
Depend on where you send for service, they know how to fix it now. Service Centers actually are contractors provide services for Samsung and others, the fact that most people don't know.
http://forum.xda-developers.com/showpost.php?p=59573206&postcount=100
It Works. Battery connector replaced. Smoooooth
After 2 visits to Samsung , my unit finally works fine.
Motherboard and LCD were changed first time. But issue persisted.
Second time, battery connector was replaced. Since then it has worked very very smoothly.
Click to expand...
Click to collapse
Thanks, missed that other thread. Next time, I'll send them an en explicit request to replace the battery comnector, and refer to those two threads.
Stefan
Tapatalked on some kind of Samsung tablet
Description of the problem:
This happens several times in a day, but I have had a few days when this did not happen. When waking the phone it becomes super slow, like 1-2 frames per second slow. After rebooting- the recovery is just as slow. Sometimes the view is moved vertically up, the top part that is moved outside of screen and is drawn ant the bottom. Sometimes the image flickers. I have not noticed any pattern what stops this behaviour, it is just over after some time (5s to 2 hours).
What I have tred with no success:
Rebooting, clearing cache, factory reset, bringing the phone to full stock (http://forum.xda-developers.com/oneplus-one/general/tool-oneplus-one-return-to-stock-t2970390), updating to latest version, several ROMs and different kernels with each of them. After flashing any new rom the phone used to work fine for a day or two, then the stutter reapeared. Tried it without installing any apps- same problems.
I had to replace the cracked screen and the camera that didn't focus to far objects. The touchscreen ribbon is now insulated from the metal LCD back since some people suggested this might be the reason for touchscreen responsiveness issues.
It seems that the processes work normally, but the view on the screen is updated slowly.
What made the problem less bad:
I had applied a glass screen protector. Removing it increased the time between slowdowns.
Since I bought the phone secondhand and had tinkered with it I cannot get it replaced.
I have tried everything I could, now I need your help
Any suggestions?
A video to visualize the issue: https://www.youtube.com/watch?v=h8z06xnlqk8
Noone? No ideas?
Hi,
Sounds like a Hardware issue to me.The board ist mostly bad soldered. It can happen sometimes in the factory(not only at OnePlus, Samsung, HTC too), even if they test the devices before shipping.
Background: We had some germans around here had the same issue, they got a new replacment by OnePlus, OPO support told the customers that the hardware was faulty.
Can u afford another Mainboard for the OPO ? That will fix that issues for sure.
Well that makes sense I'll poke around to see if I can get one for as little as possible. So far I'd expect to spend ~250$ and that is just bad business
no worrys, u dont need to spent that much.check aliexpress or if your lucky buy a dropped OnePlus One on eBay. One with working mainboard. It will cost around 30-50% less than a single Mainboard would Sounds ridiculous but its true.
[Q&A] WiFi stuck on turning on; MAC 02:00:00:00:00:00; G2 G3 G4 G5 Nexus5 Nexus 7 etc
Hi!
If you are reading this now, you are probably one of the unlucky fellows who's WiFi (and Bluetooth) stopped functioning, and if so, you are probably deperately searching for a solution/fix. I might have something for you, but first:
*** DISCLAIMER/WARNING ***
You yourself are exclusively responsible for whatever may (or may not) happen to your mobile device, to yourself or others. I am only giving hints/advices here that *MAY* help, but I will not take any responsability, nor will I provide any support, in absolutely *ANY CASE*, including, but not limited to: your problem not being solved or/and your mobile device becoming partially or completely broken. Let me be very clear: If you do anything to your device rendering it useless, destroying it, seriously or fataly injuring you or others, and then come blaming me or/and cry for help, I will point my index finger at you and laugh at you. Period.
If you are a impatient person and want to get straight to the point, jump right to section 6.
Table of Contents
0. Foreword
1. Description of the problem
2. Urgent advice
3. Things that didn't work
4. There is little hope
5. My most obvious advice
6. LET'S GET SERIOUS!
6.a Sellotape / Scotch tape
6.b Refrigerator / Freezer
6.c Oven
0. Foreword
Two or three months ago, one fine morning, the WiFi/BT of my LG G2 suddenly stopped working. Initially I thought this would be only one stupid annoying minor thingy, that I’d be able to solve it fast. I was wrong.
1. Description of the problem
When turning on the WiFi, it would just stay in "Turning on..." forever. Similar thing for Bluetooth: It would stay on for a few seconds and then turn itself off again after. (But then, who needs Bluetooth anyway, WiFi ist probably 100 times more important...). I have thoroughly searched the internet, and I found quite some videos with exactly the same problem (remove the two blanks from the links to watch):
h ttps://w ww.youtube.com/watch?v=fRGnQz1zUmw
h ttps://w ww.youtube.com/watch?v=4W8YJMDFM88
h ttp://w ww.dailymotion.com/video/x2cuyjt_nexus-5-turning-wifi-on-frozen-problem_tech
2. Urgent advice
I want to prevent you from wasting countless hours searching for a solution - I wasted so much of my time already, no need for you to repeat that. Therefore: *Please* be aware that there is a VERY HIGH PROBABILITY that this issue is being caused by a hardware defect. I can not speak for all devices of course, but keep in mind that the main reason I wasted so much time, was me beliving it was some software issue! See the next section for a glimpse of stuff I have tried without any success:
3. Things that *DIDN'T* work
01. Restarting WiFi/Bluetooth several times
02. Rebooting the phone
03. Turning airplane mode on/off several times
04. Slapping/hitting the phone (this was indeed suggested in a forum)
05. Using WiFi-Fixer apps
06. Resetting to factory settings
07. Upgrading to newest Android version
08. Fully drained the battery and left it uncharged for several hours
(Rooted the phone)
09. Deleting the /data/misc/wifi/wpa_supplicant.conf
10. Deleting the whole /data/misc/wifi folder
11. Creating a file named ".bdaddr" in /persist/bluetooth containing a MAC-Address in hexadecimal format
12. Creating a file named ".macaddr" in /persist/wifi containing a MAC-Address in hexadecimal format
13. Flashing several custom ROMs to it (CyanogenMod, ParanoidAndroid, ...)
14. Going back to stock ROM
15. etc. etc. etc.
16. Several combinations and permutations of the above
4. There is little hope
Again, as the cause of the problem is most likely a hardware issue, I don't recommend going through all the steps as described in the previous section; however, though none of the steps worked for me, this doesn't mean that none won't work for you neither; you might be luckier than I was. In that case, enjoy your restored WiFi and be happy.
5. My most obvious advice
You need to replace the motherboard (main board) of your device.
Honestly, if you can afford it and it doesn't cause too many inconveniences to you, you'll be better off by simply buying a new device. If you don't want to buy a new device, send it in for repairs. If you don't want to do that as well, you'll have to fallback to a DIY solution:
I. Buy a new main board for your device. Be careful to get exactly the right component for your specific model. If you dont find any shop selling those, there are plenty of individuals out there that own devices with broken displays. You dont need the displays, you need the motherboard. Buy one such broken device, and you'll have your main board replacement.
II. Replace your main board or let someone else do it for you
Continues below.
continuation
6. LET'S GET SERIOUS!
If you are reading this, you either didn't read or you decided not to follow my most obvious advice in section 5. So be it. If you want to carry on from here, be sure to re-read my disclaimer at the top of my post.
There are 3 DIY possible fixes for the WiFi problem - none is guaranteed. I will describe them from the most harmless to the most kamikaze/deadliest. All of them will require you to open your device; if you are not careful and damage any of the components inside, you will end up with a worse device than before - but hey, don't say I didn't warn you.
At this point we assume that the cause of the problem is a faulty solder joint of your WiFi IC. The goal is to try to restore that solder joint. To do that, you will have to:
I. Open your device
II. Find your main board and separate it from all connected plugs
III. Find / identify the WiFi IC chip on the main board. I recommend searching for a service manual for your device, or/and searching for a disassembly video for your device; you need to know which one of the chips on the main board is the WiFi one.
Once you have identified your WiFi chip, you have 3 options, which you may combine with each other, but I recommend to try them out one-by-one as follows:
6.a Sellotape / Scotch tape
You need to make sure that your WiFi chip is pressed against the main board (ideally, this ensures the broken contacts touch each other, solving the problem). The best way to achieve this, is to attach a series of tape strips on the top of the WiFi chip, causing it to be pressed against the main board by the surrounding cover/hull once you reassemble/close the device. The tape strips are just a suggestion, do whatever you find convenient as long as you ensure that the chip is pushed against the board at all times.
This method may solve the WiFi problem already. When you turn your device back on, give it some time (5-10 minutes) and reboot it a few times if the problem still persists. My own WiFi didn't function right away, but after a while it finally recovered - hurray!
6.b Refrigerator / Freezer
Instead of using the tape as described in 6.a, you may first try to put your motherboard in a fridge for a few hours/days. But make sure to put it there in a plastic bag, and avoid moisture as much as you can, specially when taking it out of the fridge. Make sure its completely dry before reassembling your device!
By the way, try the refrigerator option BEFORE you try the freezer option!
6.c Oven
If everything else fails, the oven might be your last chance. This is not a joke, but as you probably can assume, it is "All-In" i.e. highly risky. The theory behind this is that high temperature will cause defective solder joints to reflow, reconnecting and thus fixing the problem.
You should only try this as a matter of last ressort. Be warned that you may fully destroy your main board, and there is a high chance that you will. Also, you may cause serious injury to yourself or others. Make sure you make backups of your data first. DO NOT BAKE THE WHOLE DEVICE, ONLY THE MAIN BOARD. DO NOT BAKE THE BATTERY!!
If you are still reading:
I. pre-heat your oven to 385° Fahrenheit (196° Celsius)
II. put your main board in the oven, bake it there for 7 minutes
III. remove from the oven, let it cool down until every component of the board has room temperature
Finally, here is a video of a guy doing a similar thing, but with a heat gun:
h ttps://w ww.youtube.com/watch?v=A4n0j3uaS7E
Ok, this is all, I hope I could help you.
Good luck!
Summary
Hello all,
first of all, I want to thank brysclar and xbing6 for their valuable feedback! Thanks a lot guys! :good:
Now, in an effort to update this thread and in an effort of trying to summarize it in fewer words (my disclaimer above applies!):
- The described problem seems to affect mainly (all kinds of) LG devices
- The issue seems to be caused by a defective soldering of the Wi-Fi chip on the main board
- The defect seems to be induced by dropping or/and overheating the device; recharging the battery, big/long app or android updates or the flashing of custom roms could cause excessive heating
- brysclar pointed out that replacing the battery might solve the problem (I haven't tried this out myself, so I can neither deny nor confirm this)
- My recommended solution is 6.a - applying pressure on the Wi-Fi chip, pushing it against the main board, using tape stripes
- There is a video of a brasilean guy doing some similar, but using pieces of an old credit card instead of tape strips: https://www.youtube.com/watch?v=OJkdva2iOag BUT PLEASE NOTE THAT HE IS APPLYING THE PRESSURE ON A RANDOM SPOT, NOT DIRECTLY TO THE WIFI CHIP! It *may* work for you, but if it doesn't, find/identify your Wi-Fi chip and apply the pressure there
- If everything else fails, and only as a matter of last ressort, you may try what I have written in 6.c
So... this thread has over 500 views, but not one single reply.
Guys... what has your experience been? Have you tried anything out from the posts above, and if so, what was the result? Did it help you? Do you recommend anything? Has something else, not written here, worked for you?
There are a lot of people out there having the same problem. It would be great if you could give any feedback, share anything that helps the community.
Click to expand...
Click to collapse
I honestly didn't see this post before. You really covered every detail very well. So far, returning my G3 to stock and replacing the battery has fixed it for me. Weird. I know. I did try 90% of the things on your "things that don't work" list and you are correct. They don't work.
wlanmac 02/00/00/00/00, Bluetooth is OK
Hey, i just got an LG LS990 with same Wifi issue and i'm ready to try so WITNESS ME!
Thanks for an amazing and detailed post lml
Simply awesome.
I have similar issue with my Nexus 5x. It is QCA6174 hw 3.2 chip, lspci does not detect this chip any more. I am going to do a little bit investigation from device driver (cnss) perspective. It enables one GPIO to provide power to this WiFi chip, I will try read back this GPIO status to see if it is enabled. I do not have the schematics, I do not know how to check if power is supplied to this wifi chip.
lspci used to show below:
$ ./lspci
00:00.0 PCI bridge: Airgo Networks Inc Device 0300 (rev ff)
01:00.0 Network controller: Atheros Communications Inc. Device 003e (rev ff) (this is qca6174)
If kernel driver investigation does not reveal anything helpful, I will ask other guys to replace the chip.
I thought it is because of vendor partition is accidentally wiped out, maybe it is unlikely.
---------- Post added at 08:49 PM ---------- Previous post was at 08:40 PM ----------
As Bluetooth can not be turned either, I am tending to think this is hardware related as well. As described previously, I will see if I can check that gpio status.
investigating
xbing6 said:
I have similar issue with my Nexus 5x.
(...)
I am going to do a little bit investigation
Click to expand...
Click to collapse
Hi xbing, and thank you for your feedback! :good:
I am really curious and looking forward to hear the results of your investigation! I believe that in your case, too, the Wi-Fi/BT chip is not being supplied correctly due to a defective soldering. Note that I don't think that the chip itself is defective, only the contacts between the chip and the main board. So, before replacing the chip, I'd recommend to first try what I've written in 6.a (or check my update/summary above).
Keep us posted about everything you find out!
Sprint declined to fix my LS990 due to "water damage" being the reason for it not working, and wanted to charge me a $150 deductible for a $100 phone. Shimming the WiFi chip against the metal covering with some thermal pad I had lying around and adding a bit of sticky foam on top of the ribbon cable for the camera worked great! Much thanks!
Tomcat5 said:
Sprint declined to fix my LS990 due to "water damage" being the reason for it not working, and wanted to charge me a $150 deductible for a $100 phone. Shimming the WiFi chip against the metal covering with some thermal pad I had lying around and adding a bit of sticky foam on top of the ribbon cable for the camera worked great! Much thanks!
Click to expand...
Click to collapse
Any idea if thermal paste/grease could work?
unlikely
NavHur said:
Any idea if thermal paste/grease could work?
Click to expand...
Click to collapse
Hi NavHur,
since the problem is mostly caused by a loose Wi-Fi chip, respectively a defective solder joint, using thermal paste or grease is unlikely to help; again, what you need to do is to have your Wi-Fi chip pushed against your main board. You can use your imagination on how to accomplish this; what Tomcat5 described he did ultimately led to exactly having his chip being pressed against the board.
Of course you are free to try whatever you want - if you find new solutions please post some feedback.
Good luck.
NimbleWeasel said:
Hi NavHur,
since the problem is mostly caused by a loose Wi-Fi chip, respectively a defective solder joint, using thermal paste or grease is unlikely to help; again, what you need to do is to have your Wi-Fi chip pushed against your main board. You can use your imagination on how to accomplish this; what Tomcat5 described he did ultimately led to exactly having his chip being pressed against the board.
Of course you are free to try whatever you want - if you find new solutions please post some feedback.
Good luck.
Click to expand...
Click to collapse
Thanks you so much, I placed a small piece of plastic above the wifi chip and one next to the camera lens. Now the wifi works fine. However my screen was pushed up so it bended a little. The faulty thing was my battery, not the added plastic. I compared mine with the one of a friend, mine was 1 mm bigger. (also with the battery of my friend's g3 the screen was fine)
I'll be changing it soon.
same problem as u but sometimes wifi works(mainly fully charged) and sometimes dont
i have lg g2 D802 model. It had a wifi problem as u shown in your videos,my phone also behaves same like yours but sometimes it works normally like while charging,works like 2 or 3 times a day(for 5-10 min).please tell me whether my phone got ic problem or software issue
Pratap94 said:
i have lg g2 D802 model. It had a wifi problem as u shown in your videos,my phone also behaves same like yours but sometimes it works normally like while charging,works like 2 or 3 times a day(for 5-10 min).please tell me whether my phone got ic problem or software issue
Click to expand...
Click to collapse
Hi Pratap94,
nobody, neither here in this forum nor elsewhere in the internet, will be able to give you a reliable answer without having a *physical* look at your phone. Nobody.
However, I can give you my opinion, based on the stuff you wrote: The fact that it works normally sometimes, specially while charging (probably it heats up in the process?), indeed seems to indicate a hardware issue. I believe you have a loose Wi-Fi chip i.e. a defective solder joint, like I had on my LG G2 D802 as well. I solved my problem by doing the stuff I described in 6.a.
Good luck.
Thank you so much
NimbleWeasel said:
Hello all,
first of all, I want to thank brysclar and xbing6 for their valuable feedback! Thanks a lot guys! :good:
Problem solved good bless you!! the problem is fix in that youtube video XD
Click to expand...
Click to collapse
Sadly step 6.a did not help me. Well, it worked for first 5-10 minutes and then back again.
Olzhas18 said:
Sadly step 6.a did not help me. Well, it worked for first 5-10 minutes and then back again.
Click to expand...
Click to collapse
Hi Olzhas18,
that might be an indication that your WiFi chip is still a bit loose and is not sitting tight enough on the main board. On LG G2, it is difficult to push the chip against the board because it's covered by a metal cover...
Also, did you check out this video: https://www.youtube.com/watch?v=OJkdva2iOag ?
Good luck!
NimbleWeasel said:
Hi Olzhas18,
that might be an indication that your WiFi chip is still a bit loose and is not sitting tight enough on the main board. On LG G2, it is difficult to push the chip against the board because it's covered by a metal cover...
Also, did you check out this video: https://www.youtube.com/watch?v=OJkdva2iOag ?
Good luck!
Click to expand...
Click to collapse
Thank you this tip and this whole thread. I have seen this video, but still the same effect. 5-10 minutes, I can rean some news and back to flashing. I'm going to buy Huawei Honor 8 soon, it was the last chance to recover my G4. I doubt I will purchase any other phone from LG.
Same boat
But bluetooth working
In cm roms also wifi tethring can be onn
But u cnt turn onn wifi
I had the same issue, can't turn on Wifi after factory reset.
I turn off my device off after one hour and reboot wifi was OK but when I want to upgrade some apps iwifi turn of again and my phone reboot with no SIM card.
I do "6.a Sellotape / Scotch tape" + a creedit card cut with this video https://www.youtube.com/watch?v=6_0jzp65eLY#t=73.319872
My LG G2 works fine
Hello everyone.
my device is actually a G play mini but we all know it's just a rebranded honor 4c ( in my case CHC U23)
my problem is wifi/bluetooth don't "see" any networks. However, mobile 3g works fine
Don't know when problem started because the phone was handed down to me.
I've done a lot of research and I will post my findings.
- This seems to be a common problem with Honor 4C/GPlaymini/P8lite. I've tried any all all stock and custom roms from all the models above and problem persists so I'm possitive it's hardware related.
- From searching youtube the solution seems to be to replace or "reball" the wifi IC. my first finding is that the part number is:
HI1101 ( I had to apply hot air to a metal shield in order to remove it and see that) it's under the shield 'between' the Kirin620 and the headphone jack. This is the same IC chip as p8 lite
- a motherboard replacement costs about the same as a new phone so not worth it IMO however the wifi chip is easily findable and reasonably cheap on ebay or alixpress and I would give it a try. (I'm a beginner but wanting to learn)
My question if anyone has any experience is:
1) In youtube videos the wifi/bluetooth switch was greyed out and then the fix was to replace IC. Since I could use the switch but phone just didn't "see" any networks (even next to the router) does that mean the problem lies elsewhere and I'm just risking to brick the phone?
2) assuming wifi IC is fine, my other idea is the RF cable/ribbon/connection is damaged (which makes sense) but I can't for the life of me find where such internal cable is either by myself or in dissasemble videos (of which there are very few for our 4C) But interestingly on ali and ebay such a part exists (won't post links but honor 4c wifi connector is easy to find)
Does anyone know where such a connection is located or if it's just a mistake from the sellers? Are there boards that don't have those white rf cables to connect internal external antennas? Where is even RF antenna on the 4C?
I will update this if I attempt repairs but it will take a long time for any parts to reach my country.
Any other input on the wifi/bluetooth issues is appreciated. Also perhaps share your story if you have a similar problem. Specially if you solved it.
Sorry if I'm not posting in the right place, but this is as close as I could get for my not-so-popular model.
alderus said:
Hello everyone.
my device is actually a G play mini but we all know it's just a rebranded honor 4c ( in my case CHC U23)
my problem is wifi/bluetooth don't "see" any networks. However, mobile 3g works fine
.
Click to expand...
Click to collapse
Hei Alderus,
Did you manage to solve the problem?
I have the same issue with the WIFI/BT (they're grey).
Please let me know if you have any updates.
Thanks!
fixed your issue?
alderus said:
Hello everyone.
my device is actually a G play mini but we all know it's just a rebranded honor 4c ( in my case CHC U23)
my problem is wifi/bluetooth don't "see" any networks. However, mobile 3g works fine
Don't know when problem started because the phone was handed down to me.
I've done a lot of research and I will post my findings.
- This seems to be a common problem with Honor 4C/GPlaymini/P8lite. I've tried any all all stock and custom roms from all the models above and problem persists so I'm possitive it's hardware related.
- From searching youtube the solution seems to be to replace or "reball" the wifi IC. my first finding is that the part number is:
HI1101 ( I had to apply hot air to a metal shield in order to remove it and see that) it's under the shield 'between' the Kirin620 and the headphone jack. This is the same IC chip as p8 lite
- a motherboard replacement costs about the same as a new phone so not worth it IMO however the wifi chip is easily findable and reasonably cheap on ebay or alixpress and I would give it a try. (I'm a beginner but wanting to learn)
My question if anyone has any experience is:
1) In youtube videos the wifi/bluetooth switch was greyed out and then the fix was to replace IC. Since I could use the switch but phone just didn't "see" any networks (even next to the router) does that mean the problem lies elsewhere and I'm just risking to brick the phone?
2) assuming wifi IC is fine, my other idea is the RF cable/ribbon/connection is damaged (which makes sense) but I can't for the life of me find where such internal cable is either by myself or in dissasemble videos (of which there are very few for our 4C) But interestingly on ali and ebay such a part exists (won't post links but honor 4c wifi connector is easy to find)
Does anyone know where such a connection is located or if it's just a mistake from the sellers? Are there boards that don't have those white rf cables to connect internal external antennas? Where is even RF antenna on the 4C?
I will update this if I attempt repairs but it will take a long time for any parts to reach my country.
Any other input on the wifi/bluetooth issues is appreciated. Also perhaps share your story if you have a similar problem. Specially if you solved it.
Sorry if I'm not posting in the right place, but this is as close as I could get for my not-so-popular model.
Click to expand...
Click to collapse
woops. I should have posted long time ago. Anyways the update is I solved my problem (or it got solved by itself)
I had a business trip during summer, I still didn't had the replacement modem. Anyway, I remember it was blazingly hot and kept the phone in my pocket and then... I was very surprised to see wifi was detecting networks when back in the hotel!
I was running Lineage android 6.0. Didn't do any hardware or software changes, just went to a different city by plane it was hot and it started to work! there's is the funny catch that it never seems to work on the wifi I originally used it in back in my city(I moved from there but went back and found that I could see the network but it never really connected)
Other than that wifi has been working normally in any other home/office I've been to. I have no idea what really happened, but definitely I will never buy another huawei phone.
sorry if this doesn't help anyone in the same boat...