Hi everyone,
I am a user of Samsung i5801. My device has been already rooted and ran with serveral root apps. Now, I would like to overclock my phone. I can only hold the frequency at 667Mhz with SetCPU, but I cannot set it to a higher one. How can I solve this problem? I really want to make my device running faster.
I am looking forward to your reply, thank you!
me 2!!
same fr me i want to overclock my rooted i5801...some 1 pls help!!
and if possible for the froyo version 2!!
iv searched the web but cant find any roms for the 15800 or i5801..
@unreal: yeh, even i waz searchin' lyk a hell for froyo on ma i5801 device but now no more search coz i already installed froyo on ma apollo i5801..
juz follow the steps:
What you will NEED!
1. A Samsung Galaxy 3 (DUH!).
2. The 2.2 Firmware
3. ODIN downloader
4. OPS files
5. A windows PC + samsung data cable.
download files:
firmware: I5800XXJPA.rar (108.32 MB)
Odin downloader : I5800_Odin_Multi_Downloader_v4.252.exe (435 KB)
ops files :apollo_0531.zip (207 Bytes)
then back up ya device with latest kies,afta back up juz reset to factory settings by typing *#*#7780#*#* in case not necessary though,
STEP 1
Download all the files above, and make sure you have the latest version of KIES software installed.
STEP 2
Extract the RAR to get a .tar file.
STEP 3
Open ODIN Downloader.
MAKE SURE you select One Package, Auto Reboot and Protect Ops checkboxes.
Select the Ops file (the file we downloaded earlier).
And finally select the tar package we extracted from the RAR earlier.
NOW CLOSE ODIN.
STEP 4
Backup you phone and data with the KIES software (after you are done exit KIES)
Turn OFF the Galaxy 3 and remove the Battery
Reinsert The Battery and Press the following buttons together
Home + Menu + Volume + Power
(it could be volume up / volume down / volume up+down , So, try all three)
Hold the buttons together till you see the downloading screen.
Step 5
Now Connect your Phone with your PC using the ORIGINAL DATA cable and wait for windows to finish installing the hardware
Once you get a prompt – “the device is ready to use”
Fire up ODIN DOWNLOADER (make sure the settings are same as before) Your phone will now show up connected in Com Port
STEP 6 (Final Step)
CLICK START and wait for process to finish, once done your device will automatically reboot and will have Android 2.2 running on it.
Enjoy!
I am a Hong Kong user, can I use this firmware update?
Overclocking
Dude you need a kernel that supports overclocking. obviously stock ROM doesn't suuport.
some links for kernels:
best out there : http://forum.xda-developers.com/showthread.php?t=997367
g3mod: http://forum.xda-developers.com/showthread.php?t=1252707
enjoy ...
This is latest GINGERBREAD.XILG1 firmware (August 2012) for GT-s5570i
Firmware downloaded from sammobile and split for ODIN using odinatrix.
This also works to unbrick ur 5570i
Steps:-
1)Download GT-s5570i.zip from http://www.mediafire.com/?qmb5m4tzznnbjpm
2)Open Odin3_v1.84 from folder ODIN.
3)For PDA select PDA_S5570IXILG1_S5570iITVLG2_S5570IXXLF3_HOME.tar
For PHONE select MODEM_S5570IXILG1_S5570iITVLG2_S5570IXXLF3_HOME.tar
For CSC select CSC_S5570IXILG1_S5570iITVLG2_S5570IXXLF3_HOME.tar
4)PIT/BOOT files are not required---leave blank !!!
5)Put device in download mode (Hold Vol Down + Home + Power) and connect to the PC via the USB cable.
6)Press the START button
7)Wait up to 5 minutes, after which will show PASS (do not touch anything until it comes out the word PASS!)
8)The phone will reboot itself
9)After the output will be written PASS disconnects the cell from the PC
Default language is Italian.You can always change the language.
If you want to ROOT i have included zip file to be flashed in ROOT folder
Wrong forum dude
"Addicted to XDA more then facebook.....lol"
this is not Galaxy Mini form ??
Can anyone link me to the forum where this does belong? Can't find it..
don't be so harsh guys...this thread might moved from mini section since mini plus is a lot similar with ours.
techno-update said:
Can anyone link me to the forum where this does belong? Can't find it..
Click to expand...
Click to collapse
i m not sure but i think its like the Y & Y Duos have same so mini also have the same
http://forum.xda-developers.com/forumdisplay.php?f=1314
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
No cigar on Cubot C7
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
Cubot C7
kostar said:
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
Click to expand...
Click to collapse
Have you tried downloading the 64-bit driver from cubot dot net webside?. Here is the link
Darn, I cant post a link here.... go to cubot dot net website and click on services and download C7 USB Driver.
Once you download the file. Extract it and in there you will find X64 and X86 Folder. Use the drivers from X64 folder cause you are using 64-bit Windows 7.
Cant download the "C7_root_software.rar"
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Worked
Hello guyz, an update after 2 hours. I did successfully load stock ROM on Cubot C7 from ebay. Exactly like the tutorial says. Thanks for the tutorial.
I just thought that as the download from cubot net is reaaaallly slow and I have even requested the ROM myself others may have the same problem so here you go a mega key for the files
C7_root_software: Hp2f3lp-UerqPjPs2pUu-jgzruFj59Dtz0B5ScLZSGE
Debug_Tool: ByLnzD1Q7XgPALRoYx35GnEnyIcsX_oIMCLlMyRSY7w
I cant post links and those are file keys to download from Mega.co.nz, simply search for "download from mega with file key".
Thanks for the tutorial and see you around.
CUBOT C7 - How to root
pijemcolu said:
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Click to expand...
Click to collapse
The easiest way to root Cubot C7 is using Z4Root.apk tool. Download the pack from the web and copy over to your phones internal storage.
Here are the steps:
1) Install the Z4Root on your phone.
2) Run Z4Root on your phone.
3) First, run Temporary Root, You will see Superuser icon if it ran successfully.
4) Run Z4Root again and this time Run Permanent Root. You phone will boot and you will have your phone permanently rooted.
Thanks
Thank you so much for your help, follow the guide, all worked great, download was abit slow but I didn't worry about that knowing this is the only god dam tutrial I can find, thanks so much, had to register to make this post.
Thanks for the stock rom.I am now currently making a custom rom for the CUBOT C7
CUBOT C7
In case, anyone having trouble downloading the CUBOT C7 STOCK rom please download it from the following link. Thanks
https://mega.co.nz/#!5A1zURIK!BI-fQWVttxOcSDRd4jMTuzwl7xFcyxP9463-lq9GmqU
It's not working
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Anybody?
Hello,i'm searching on the forum+net,but i cannot load again the update.zip from the site because there is no recovery option after install stock rom !Maybe someone has a solution for this?
Update the update.zip
gvanels said:
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Click to expand...
Click to collapse
So after searching i did it!BUT in order to fix things(only fixed BT audio)there are many things that i don't can do....like a sync only apps,and after an restart i must put again a code,or the memory is out,and ofcourse no recovery menu,and other minor issues,How can i restore the rom that there is on there site/support.Maybe someone knows how to update the update.zip without recovery menu?
Thank you, on the very detailed,
Help please
Hello, I have a T999 dual sim (looks like a Xperia) it has sp6820a with 650mhz, Do you think I can use this ROM?
Please help me with this, I just kill a fake S3 i9300+ to follow another instructions.
Thank you so much from Argentina
QUOTE=z_man3007;37987768]First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.[/QUOTE]
t9500-b
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
hello, this firware works whit t9500-b ??
Hi has anyone the firmware of cubot c7 ....
What is This Guide:
This guide will give you the complete and easy steps to follow when you want to update the firmware version of your Samsung Galaxy Star Duos S5282, The main goal of this guide is to update your Galaxy Star Duos by yourself and by using Free tools and files only, No need to buy or pay for anything at all, We bring you everything you need to perform the update so all you should do is reading the guide and start working.
Important Steps:
- Backup any wanted data before starting the update process, Read our online guide (How to Backup your Samsung Mobile Phone).
- Charge your mobile phone to be at least at 70% of its charging level.
- Write down the current firmware version of your mobile phone, You may need it in case of anything happen during the update process.
Tools, Files and programs:
- Stock official firmware of Samsung S5282 Galaxy Star Duos (Download and extract the package).
- USB drivers for your S5282 ( Download and install it, Then restart the computer).
- Odin flasher (Download and extract).
- Suitable USB cable for Samsung S5282 Galaxy Star Duos.
- A computer with Windows OS installed.
Samsung S5282 Galaxy Star Duos Firmware Update Steps:
- Turn off the phone.
- Take out any SIM cards or memory card of it.
- Run Odin.exe program.
- Check the following settings: Auto Reboot, F.Reset Time, Nand Erase all.
- Click Bootloader button and select: BOOTSPL_S5282xxxxxx_..._REV03_user_low_ship.tar
- Click PDA button and select: CODE_S5282xxxxxx_1127854_REV03_user_low_ship.tar
- Click PHONE button and select: MODEM_S5282xxxxx_REV03.tar
- Click CSC button and select: CSC_Oxx_S5282Oxxxxxx_1127854_REV03_user_low_ship.tar
(In-case you'd like to re-partition, check "re-partition" and select the mint.pit file)
- Put your Samsung S5282 Galaxy Star Duos device into Download Mode:
Press and Hold Volume Down key + Home key + Power key, When you see the warning message release all keys, And press Volume Up key to enter the phone into Download Mode.
- Connect the device to your PC using the USB cable.
- Wait for Windows to install the needed USB drivers.
- Look at Odin's window and check if the COM port of your device is detected (0:[COMxxx]).
- Click on Start button.
- Odin will install the new firmware files into your Galaxy Star Duos, Just wait for it to be done.
- The device will be rebooted after installing the new firmware.
- Look at Odin's window and if you see PASS! Word then the update was successful.
- Disconnect the USB cable from phone.
- Wait for the device to be fully on and check the new firmware version bu this code *#1234#
- Now you can turn the mobile off, Insert SIM Cards, Memory card, Then turn it on again.
- When the device is on again you are free to customize it and restore your backup (In case you have made one), Then enjoy your perfect work.
IMPORTANTNotice: When you have a firmware package with one file inside, Then no need to check Re-Partition option, And never use PIT file too, All you should do is selecting the one file as PDA file, and perform the other explained steps.
Boot loop occurs
Can you give me the link ???,I goolged always getting.. a sigle flashable file. When i flash with that, always boot loop occurs..
Any advise pls...
subinkoovery said:
Can you give me the link ???,I goolged always getting.. a sigle flashable file. When i flash with that, always boot loop occurs..
Any advise pls...
Click to expand...
Click to collapse
Use single one in pda download from samsung-updates.com
Sent from my Micromax A58 using XDA Free mobile app
Please Help Me
After installing stock rom in galaxy star (GT-S5282) , I got something on my screen showing some details like pda, etc (picture attached with this post). and it is staying forever. Also when i long press power button, it is directly sutting down without showing any menu. screen is not locking.And also showing internal memory as 0. When I try to install any custom rom, device is going into boot loop. PLEASE HELP ME!!!
Yes same here please help my friends wanna need my help
Hi everybody,
For the owners of Samsung Galaxy Tab 3 lite (SM-T116NQ)!
We now can also get ROOT permissions on our tabs, just follow the guide below! Just make sure you have the right drivers installed on your computer for the Tab 3 lite SM-T116NQ!
Do this on your own risk, I am not responsible for problems on your tablet! (if you face any, which i dont think you will. Because I didnt face any problems!)
GUIDE FOR ROOTING SM-TT16NQ!
1. First download this TWRP Recovery image.
Link TRWP Recovery - > www100 zippyshare com/v/pML0LCKw/file.html
(put the dots next to the word "zippyshare", to make the link working!)
2. Make sure you have the latest ODIN software on your computer, if not you can download below this.
Link Latest ODIN - > www odindownload com/SamsungOdin
(put the dots next to the word "odindownload", to make the link working!)
3. After downloads finished and you have installed ODIN on your computer. Put your TAB 3 lite SM-116NQ in "Download Mode".
4. Then connect your tablet to the computer with you samsung usb - cabel.
5. Open ODIN software and in options make sure "Auto-Reboot" and "F-Reset Time" has been checked on.
6. Now click on "AP" (the second box) and search for the TWRP recovery file you have downloaded.
7. After you found the file just press on "START" and let the program do his work.
8. When is finished you will see left up "PASS" meaning that the recovery has been flashed succesfully!
9. Now you should reboot in to recovery and will see TWRP recovery, Just follow the guid on the tablet screené
10. After you can reboot your tablet again. And download Supersu from store or the Internet Browser.
11. Install Supersu which will go without any problem now!. After Reboot you should have ROOT acces.
To Check if you have root acces, just download the app below from Google play store.
Root Check --> www play.google com/store/apps/details?id=com.joeykrim.rootcheck&hl=tr
(put the dots next to the word "play.google", to make the link working!)
If you occur any problem with this guide, reply here. I will try to help you out!
Goodluck! :fingers-crossed:
Works also on sn-t113
hi
Hi I'm using the same model
But it runs very slow on version kit Kat 4.4.4
I wanted to ask if there is a lollipop rom for this TABLET , please help me if there is a way to install higher android versions.
The link doesn't work!
Can you please upload a proper link.
Thank you
the link works perfect. http://www100.zippyshare.com/v/pML0LCKw/file.html