Database Info

[Q] How can I overclock my i5801?

Hi everyone,
I am a user of Samsung i5801. My device has been already rooted and ran with serveral root apps. Now, I would like to overclock my phone. I can only hold the frequency at 667Mhz with SetCPU, but I cannot set it to a higher one. How can I solve this problem? I really want to make my device running faster.
I am looking forward to your reply, thank you!

me 2!!
same fr me i want to overclock my rooted i5801...some 1 pls help!!
and if possible for the froyo version 2!!
iv searched the web but cant find any roms for the 15800 or i5801..

@unreal: yeh, even i waz searchin' lyk a hell for froyo on ma i5801 device but now no more search coz i already installed froyo on ma apollo i5801..
juz follow the steps:
What you will NEED!
1. A Samsung Galaxy 3 (DUH!).
2. The 2.2 Firmware
3. ODIN downloader
4. OPS files
5. A windows PC + samsung data cable.
download files:
firmware: I5800XXJPA.rar (108.32 MB)
Odin downloader : I5800_Odin_Multi_Downloader_v4.252.exe (435 KB)
ops files :apollo_0531.zip (207 Bytes)
then back up ya device with latest kies,afta back up juz reset to factory settings by typing *#*#7780#*#* in case not necessary though,
STEP 1
Download all the files above, and make sure you have the latest version of KIES software installed.
STEP 2
Extract the RAR to get a .tar file.
STEP 3
Open ODIN Downloader.
MAKE SURE you select One Package, Auto Reboot and Protect Ops checkboxes.
Select the Ops file (the file we downloaded earlier).
And finally select the tar package we extracted from the RAR earlier.
NOW CLOSE ODIN.
STEP 4
Backup you phone and data with the KIES software (after you are done exit KIES)
Turn OFF the Galaxy 3 and remove the Battery
Reinsert The Battery and Press the following buttons together
Home + Menu + Volume + Power
(it could be volume up / volume down / volume up+down , So, try all three)
Hold the buttons together till you see the downloading screen.
Step 5
Now Connect your Phone with your PC using the ORIGINAL DATA cable and wait for windows to finish installing the hardware
Once you get a prompt – “the device is ready to use”
Fire up ODIN DOWNLOADER (make sure the settings are same as before) Your phone will now show up connected in Com Port
STEP 6 (Final Step)
CLICK START and wait for process to finish, once done your device will automatically reboot and will have Android 2.2 running on it.
Enjoy!

I am a Hong Kong user, can I use this firmware update?

Overclocking
Dude you need a kernel that supports overclocking. obviously stock ROM doesn't suuport.
some links for kernels:
best out there : http://forum.xda-developers.com/showthread.php?t=997367
g3mod: http://forum.xda-developers.com/showthread.php?t=1252707
enjoy ...

[Q] how to upgrade baseband DDKT3 on Samsung galaxy S5670?

Hi there,
I have the following
s5670(baseband DDKQ5) + CWM + Creed Rev 3.1
Now i have few problems with the Data connectivity, so read some thread which said that i need to upgrade the baseband to DDKT3 ?
i got the DDKT3 firmware form samfirmware... now someone pls let me know how to proceed ....

Refer sticky...topic- "how to install a stock rom"
Typed on a small touchscreen

Move the file to pc..download odin istaller v4.38
Then put ur phone in download mod(while turning on press home+volume down+power on button)
Run odin
Plug the device
Now u'll c yellow colored cell indicating ur device is ready
Now in dat package u'll have beni.ops ...
Select that file by clicking ops bar on right
Assuming its a one package file--click one package --select the zip fie inside the package--start--wait for sometime--done
Sent from my GT-S5670 using xda premium

droidxpert said:
Move the file to pc..download odin istaller v4.38
Then put ur phone in download mod(while turning on press home+volume down+power on button)
Run odin
Plug the device
Now u'll c yellow colored cell indicating ur device is ready
Now in dat package u'll have beni.ops ...
Select that file by clicking ops bar on right
Assuming its a one package file--click one package --select the zip fie inside the package--start--wait for sometime--done
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
And first have the Samsung USB drivers or the kies installed....
Otherwise u won't get any yellow signal...

[Guide] [How to] Update Samsung S5282 Galaxy Star Duos Firmware

What is This Guide:
This guide will give you the complete and easy steps to follow when you want to update the firmware version of your Samsung Galaxy Star Duos S5282, The main goal of this guide is to update your Galaxy Star Duos by yourself and by using Free tools and files only, No need to buy or pay for anything at all, We bring you everything you need to perform the update so all you should do is reading the guide and start working.
Important Steps:
- Backup any wanted data before starting the update process, Read our online guide (How to Backup your Samsung Mobile Phone).
- Charge your mobile phone to be at least at 70% of its charging level.
- Write down the current firmware version of your mobile phone, You may need it in case of anything happen during the update process.
Tools, Files and programs:
- Stock official firmware of Samsung S5282 Galaxy Star Duos (Download and extract the package).
- USB drivers for your S5282 ( Download and install it, Then restart the computer).
- Odin flasher (Download and extract).
- Suitable USB cable for Samsung S5282 Galaxy Star Duos.
- A computer with Windows OS installed.
Samsung S5282 Galaxy Star Duos Firmware Update Steps:
- Turn off the phone.
- Take out any SIM cards or memory card of it.
- Run Odin.exe program.
- Check the following settings: Auto Reboot, F.Reset Time, Nand Erase all.
- Click Bootloader button and select: BOOTSPL_S5282xxxxxx_..._REV03_user_low_ship.tar
- Click PDA button and select: CODE_S5282xxxxxx_1127854_REV03_user_low_ship.tar
- Click PHONE button and select: MODEM_S5282xxxxx_REV03.tar
- Click CSC button and select: CSC_Oxx_S5282Oxxxxxx_1127854_REV03_user_low_ship.tar
(In-case you'd like to re-partition, check "re-partition" and select the mint.pit file)
- Put your Samsung S5282 Galaxy Star Duos device into Download Mode:
Press and Hold Volume Down key + Home key + Power key, When you see the warning message release all keys, And press Volume Up key to enter the phone into Download Mode.
- Connect the device to your PC using the USB cable.
- Wait for Windows to install the needed USB drivers.
- Look at Odin's window and check if the COM port of your device is detected (0:[COMxxx]).
- Click on Start button.
- Odin will install the new firmware files into your Galaxy Star Duos, Just wait for it to be done.
- The device will be rebooted after installing the new firmware.
- Look at Odin's window and if you see PASS! Word then the update was successful.
- Disconnect the USB cable from phone.
- Wait for the device to be fully on and check the new firmware version bu this code *#1234#
- Now you can turn the mobile off, Insert SIM Cards, Memory card, Then turn it on again.
- When the device is on again you are free to customize it and restore your backup (In case you have made one), Then enjoy your perfect work.
IMPORTANT​Notice: When you have a firmware package with one file inside, Then no need to check Re-Partition option, And never use PIT file too, All you should do is selecting the one file as PDA file, and perform the other explained steps.

Boot loop occurs
Can you give me the link ???,I goolged always getting.. a sigle flashable file. When i flash with that, always boot loop occurs..
Any advise pls...

subinkoovery said:
Can you give me the link ???,I goolged always getting.. a sigle flashable file. When i flash with that, always boot loop occurs..
Any advise pls...
Click to expand...
Click to collapse
Use single one in pda download from samsung-updates.com
Sent from my Micromax A58 using XDA Free mobile app

Please Help Me
After installing stock rom in galaxy star (GT-S5282) , I got something on my screen showing some details like pda, etc (picture attached with this post). and it is staying forever. Also when i long press power button, it is directly sutting down without showing any menu. screen is not locking.And also showing internal memory as 0. When I try to install any custom rom, device is going into boot loop. PLEASE HELP ME!!!

Yes same here please help my friends wanna need my help

[Q] Can I Flash my device without any problems with theses steps?

Greetings XDA-members !
I'm a total noob in flashing devices under Android..
I already (by the past) flashed many devices but no one under Android..
In fact I haven't the need for doing it..
BUT now, I'm really disturbed with intepestive reboot (due to some I/O errors in Internal Flash Storage)..
I know this can mean my devices is good for garbage throw.. BUT..
I want try something before.
So for that, I want root it !
Well, I want use this (it seems to me) clear tutorial: http://forum.xda-developers.com/showthread.php?t=1957165&highlight=cf+root
I have a Galaxy Tab 2 10.1'', all stock, never rooted, with no custom firmware, with Android JellyBean (not KitKat).
Code:
===Model Number:
GT-P5110
===Android version:
4.1.1
===Kernel version:
3.0.31-523998
[email protected] #1
SMP PREEMPT Thu Nov 22 22:04:16 KST 2012
===Version Number:
JRO03C.P5510XXCLK7
INFORMATIONS:
I must say that I never wiped the data or the cache.
Never format anything.
Never reinstalled the system.
I have already unlocked the USB Debug Mode on my Galaxy Tab 2
I haven't External SD Card (but I can buy one if required!)
Click to expand...
Click to collapse
This is the steps I want to do (please tell me if I'll be on the way to doing wrong steps, I don't want brick my devices..):
Create on my Windows a folder called : C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Downloading the file Odin3-v1.85.zip and store it to the path: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Downloading the file CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.zip and store it to C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Unzip only 1 time the zip CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.zip, so now I end up with a CF-Auto-Root-*.tar.md5 file in the location: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Unplug the Galaxy Tab 2 from my PC (if plugged in one USB slot)
Unzip only 1 time the zip Odin3-v1.85.zip, so now I end up with a Odin3-v1.85.exe file in the location: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Run on my PC the exe file located here: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN\Odin3-v1.85.exe
In the Odin3 window, I will click on a button which may think like a PDA, and then, a Window Explorer will occur, letting me choose a file
File I will choose to load is located here: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN\CF-Auto-Root-*.tar.md5
Boot my Galaxy Tab 2 in DOWNLOAD Mode (this can do it like Recovery mode BUT this time by holding the Volume Down physical button instead of Volume Up).
When the Galaxy Tab 2 is in DOWNLOAD Mode I can plug it to my PC with USB.
If now I see the "Repartition" ticked, I untick this right now!
Next, on the Odin3 software Window, I click on the "START" button to flash with CF-Root
I wait some seconds (30 per example) and then my Galaxy Tab 2 should reboot Android
End.
Now, If you see one step which can be harmful for my Galaxy Tab 2, please tell me
For running commands as root, Will I be able to make this when in recovery mode (on a CommandLine interface through my PC):
Code:
adb devices
adb shell
su
** at this state, will I be able to acquire the root permissions?? So Will I can run any root command I want run?**
And for finish, three last question...
WILL using Odin + CF-Root cause incapacity to login to an existing Google Play account?
WILL using Odin + CF-Root cause crash or brick or other things like that when I update my Android Versions from Google Play ?
WILL using Odin + CF-Root cause wipe my datas OR NOT ?
THANKS if you answer me ! Really !

Seyokentai said:
Greetings XDA-members !
I'm a total noob in flashing devices under Android..
I already (by the past) flashed many devices but no one under Android..
In fact I haven't the need for doing it..
BUT now, I'm really disturbed with intepestive reboot (due to some I/O errors in Internal Flash Storage)..
I know this can mean my devices is good for garbage throw.. BUT..
I want try something before.
So for that, I want root it !
Well, I want use this (it seems to me) clear tutorial: http://forum.xda-developers.com/showthread.php?t=1957165&highlight=cf+root
I have a Galaxy Tab 2 10.1'', all stock, never rooted, with no custom firmware, with Android JellyBean (not KitKat).
Code:
===Model Number:
GT-P5110
===Android version:
4.1.1
===Kernel version:
3.0.31-523998
[email protected] #1
SMP PREEMPT Thu Nov 22 22:04:16 KST 2012
===Version Number:
JRO03C.P5510XXCLK7
INFORMATIONS:
This is the steps I want to do (please tell me if I'll be on the way to doing wrong steps, I don't want brick my devices..):
Create on my Windows a folder called : C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Downloading the file Odin3-v1.85.zip and store it to the path: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Downloading the file CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.zip and store it to C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Unzip only 1 time the zip CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.zip, so now I end up with a CF-Auto-Root-*.tar.md5 file in the location: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Unplug the Galaxy Tab 2 from my PC (if plugged in one USB slot)
Unzip only 1 time the zip Odin3-v1.85.zip, so now I end up with a Odin3-v1.85.exe file in the location: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN
Run on my PC the exe file located here: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN\Odin3-v1.85.exe
In the Odin3 window, I will click on a button which may think like a PDA, and then, a Window Explorer will occur, letting me choose a file
File I will choose to load is located here: C:\SpecialAppDevelopers\AndroidFlasher_GalaxyTab2_ODIN\CF-Auto-Root-*.tar.md5
Boot my Galaxy Tab 2 in DOWNLOAD Mode (this can do it like Recovery mode BUT this time by holding the Volume Down physical button instead of Volume Up).
When the Galaxy Tab 2 is in DOWNLOAD Mode I can plug it to my PC with USB.
If now I see the "Repartition" ticked, I untick this right now!
Next, on the Odin3 software Window, I click on the "START" button to flash with CF-Root
I wait some seconds (30 per example) and then my Galaxy Tab 2 should reboot Android
End.
Now, If you see one step which can be harmful for my Galaxy Tab 2, please tell me
For running commands as root, Will I be able to make this when in recovery mode (on a CommandLine interface through my PC):
Code:
adb devices
adb shell
su
** at this state, will I be able to acquire the root permissions?? So Will I can run any root command I want run?**
And for finish, three last question...
WILL using Odin + CF-Root cause incapacity to login to an existing Google Play account?
WILL using Odin + CF-Root cause crash or brick or other things like that when I update my Android Versions from Google Play ?
WILL using Odin + CF-Root cause wipe my datas OR NOT ?
THANKS if you answer me ! Really !
Click to expand...
Click to collapse
Your method should work, but you will still have stock recovery. Which won't let you flash anything. Following basically the same steps, use the files here: http://forum.xda-developers.com/showthread.php?t=2535083 and you'll have custom recovery so you can do whatever you want afterwards. I personally prefer TWRP, but this will get you started properly. If you want to try TWRP you can flash the zip after your done, here it is: http://forum.xda-developers.com/showthread.php?t=2548476

wolfclan68 said:
Your method should work, but you will still have stock recovery. Which won't let you flash anything. Following basically the same steps, use the files here: http://forum.xda-developers.com/showthread.php?t=2535083 and you'll have custom recovery so you can do whatever you want afterwards. I personally prefer TWRP, but this will get you started properly. If you want to try TWRP you can flash the zip after your done, here it is: http://forum.xda-developers.com/showthread.php?t=2548476
Click to expand...
Click to collapse
Hey, thanks for answer wolfclan68 !
I don't really understand clearly what are the steps in your given link.
Better explained on the CF-Root page.
You know, I want only be able to run root commands, I'm totally lost in all theses methods...
So... can you answer me in some steps (according to what I wrote on my first thread post) ?
Or at least explain some "points" through a better clearview?
Example:
1) Download "GT-P51XX_XXXX-SuperSU-1.94-BusyBox-1.21.1_universal.tar.zip" and extract it once (you need the *.tar.md5 inside)
> What are the differences betweens each version of recovery?
2) Flash the *.tar.md5 file as PDA
> How? Like the steps [mean: Use ODIN, be in recovery mode on my Galaxy Tab 2, and click on the PDA button in odin window, after selected the right .tar.md5 file ?] I described in my first post?
3) Make sure "Re-Partition" and "F. Reset Time" UNCHECKED,
> I know what is Re-Partition, but, what is F. Reset Time ??
Please answer me:
If I flash my devices in theses steps, will it auto-wipe my data ??? (meaning losing (by formatting) Game saves, Photos, Videos, Screenshots, Game data, Apps, SQLite datas of apps, Games Licenses obtained through third apps like AppGratis, 365 apps ?)
THANKS FOR ANSWERS !
Click to expand...
Click to collapse

There are YouTube videos...Google. .
Sent from my SCH-I545 using Tapatalk

decaturbob said:
There are YouTube videos...Google. .
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
And, this is why you can't simply answer to my questions?
Correct me if I'm wrong but.. We are on a specialized board oriented to flashing, pda, smartphone and development of the technology no?
This is why I prefer ask here instead on Youtube/Google which aren't specialized...
...

[Completed] Root Samsung Galaxy Star 2 plus or Star Advance (SM-G350E)

hi guys ! This is a guide for samsung star 2 plus :good:
And i've been looking for ways to root it ; and finally found out how :good:
It was russian so i tried to translate it with google translate and did a summary! here u go :
Im not responsible of any damage caused
What u'll need​1. Desktop or notebook computer (OS Windows XP / Vista / 7/8 / 8.1)
2. Charge smartphone Samsung SM-G350E Galaxy Star Advance at least 30%
3. The original, undamaged MicroUSB cable
4. Download and install Samsung driver (if it is not installed)
5. Download flasher View attachment 3117409 (sews tablets and smartphones the company Samsung)
6. Download the file of a custom CWM Recovery: View attachment recovery.tar.rar extract the .md5 file
7. Download the update here: View attachment UPDATE-SuperSU-v2.40.zip for Root rights and copy it into the phone memory or sd card
To obtain root permissions
1. Restart your phone to download mode (vol- + menu + power button)
2. Connect the smartphone Samsung SM-G350E Galaxy Star Advance to the computer
3. Run flasher (Odin)
4. Remove the tick" AUTO REBOOT " in ODIN
5. In the PDA select the file recovery.tar.MD5 that you unrared before
6. restart your phone into recovery mode (vol+ + menu + power without releasing till a warning msg come up to the screen)
7.Sew Recovery. After Odin flashed Recovery , disconnect your phone from the PC to remove the battery and put it back
8. Select the file UPDATE-SuperSU.zip and apply it
9. Restart your smartphone, Root received!
It is highly recommended after receiving Root rights to update (if an update) application SuperSu c app store Play Store

Hi,
Awesome! But Assist is not the place for such threads. You can post it here,
http://forum.xda-developers.com/android/general
?
Thanks!

Darth said:
Hi,
Awesome! But Assist is not the place for such threads. You can post it here,
http://forum.xda-developers.com/android/general
?
Thanks!
Click to expand...
Click to collapse
k so can i just move it without need to cretae another thread in general section?