I am unable to flash cm12 rom on moto g gpe as it was already on android stock 5.0.1 .But when im trying to flash cm11 latest nightly it works and when i trying to flash cm12 ooficial rom it says error and getting failed ,i tried on many recoveries .pls help me out and im tried of trying .....................
Can you check something out? Flash cm11 and the dirty flash cm12 that must work
i tried but didn't workout and in cm11 it shows no updates available.....
karthik432 said:
i tried but didn't workout and in cm11 it shows no updates available.....
Click to expand...
Click to collapse
No. Download the CM12 separately and dirty flash it from recovery over CM11.
SaurabhSandav said:
No. Download the CM12 separately and dirty flash it from recovery over CM11.
Click to expand...
Click to collapse
i tried but it stops in middle and says error and what to do
Related
Hello guys a complete noob here, have flashed the latest nightly build of cm-11-20140730-NIGHTLY-falcon on my Dual Sim Moto G retail Asia (India), everything seems to work fine except for Mobile Data connection, there seems to be no response while selecting the APN settings or turning mobile data, have read somewhere there was an issue, wish I had read it earlier.
So is there a work around for turning on mobile data on cm11 nightly builds for xt1033 on Indian networks ?
Or is flashing stock rom the only option left ?
Kindly guide me on getting my stock rom back and working.
Thanks in advance !
Try reflashing cm or any other rom....
Sent from my XT1033
jbanti said:
Try reflashing cm or any other rom....
Sent from my XT1033
Click to expand...
Click to collapse
Reflashed CM ROM thrice, doesnt seem to work, tried reflashing 4.4.2 stock rom, getting an install aborted (expected signature to be 4.3 error) on CMW recovery, my phone came with 4.3 out of the box, so do i have to flash 4.3 stock rom to get my phone back to normal or will 4.4.2 stock rom work ?
Thanks in advance !
kailash9999 said:
Reflashed CM ROM thrice, doesnt seem to work, tried reflashing 4.4.2 stock rom, getting an install aborted (expected signature to be 4.3 error) on CMW recovery, my phone came with 4.3 out of the box, so do i have to flash 4.3 stock rom to get my phone back to normal or will 4.4.2 stock rom work ?
Thanks in advance !
Click to expand...
Click to collapse
Try other rom than CM, maybe it will work.
CM12 Official!
Guys those who have flashed Official CM12 on XT1033 couldnt get signal in it.
Problem can be solved By The following steps:
Convert the XT1033 to GPe 4.4.2(Not 4.4.4) Click Here to know how to do that.
Flash the latest TWRP recovery. Please dont use Colockworkmod recovery, it didnt work for me.. Link is here
Flash the latest CM12 from Here
Flash the Lollipop gapps from Here
Flash Donkey kernel from Here (This is required to get a signal)
Reboot and enjoy!!
All the above files are not mine!!
The above process worked for my XT1033 Asia Moto G
Am not responsible for anything that happens to your phone. Use at your risk.
can i flash cm12 nightly directly over cm11 without wiping data?
i ve previously flashed like this on earlier nightly of cm 11 it has gone crazzy all apkz gone forced stop
Yes, just flash.
experience7 said:
Yes, just flash.
Click to expand...
Click to collapse
Is that wise? Going from a KK based rom (CM11), to a L based rom (CM12)?
I'd advise user to wipe data, maybe even update to stock LRX22C and from there, flash twrp and cm12.
If he has a clean CM11 installation he can easily flash CM12 without wiping anything.
If you're on stock ROM and apply the OTA update you're also going from KitKat to Lollipop without wiping anything.
Official statement:
You can flash CM12 nightlies directly from CM11 M12 or CM 11 nightlies (no need to wipe), provided you read and followed items 1 and 2
Click to expand...
Click to collapse
http://www.cyanogenmod.org/blog/the-l-is-for-lollipop
beekay201 said:
Is that wise? Going from a KK based rom (CM11), to a L based rom (CM12)?
I'd advise user to wipe data, maybe even update to stock LRX22C and from there, flash twrp and cm12.
Click to expand...
Click to collapse
The OP's question was whether you could flash CM12 over CM11, not whether or not it would boot up
@Lethargy: That answer made my day :'D
Hi All,
I have XT1033 Dual Sim (Currently running CM12 Official Build - Latest Nightly).
I tried to install Android 5.1 based roms like (Team UB rome and unofficial build of CM12.1). I alo flashed the Gapps (Android 5.1) I used Philz recovery to flash the same.
Flashing was successful. But when I come to the setup part then i got error "com.android.phone has stopped working" at language selection page.
After that i come to the wi-fi selection page. There i selected skip and i got error "Setup has stopped working". and it again redirect me to language selection page. I get stuck in the loop.
Could anyone please help me to resolve this issue on XT1033 Dual sim device.
Hmmm... Strange. You see did you have trouble flashing CM12? If you didn't, try a different recovery (providing you know how to install)
Sam.
SamTenny said:
Hmmm... Strange. You see did you have trouble flashing CM12? If you didn't, try a different recovery (providing you know how to install)
Sam.
Click to expand...
Click to collapse
I tried both Philz and TWRP recovery. Both of them giving me the mentioned error after flashing and the booting of ROM
Did anyone try installing android 5.1 rom based on CM12.1 in XT1033 Dual Sim.
If yes, could you please provide me the recovery.img file you are using for this.
Is this problem because of i am at CM12 and then trying flashing CM12.1 ROM.
Do i need to go back to Stock 5.0.2 and then try to install CM12.1 rom.
Hi all
In order to use a custom rom , I did the following with my moto g XT1033.
It was running on android 4.4.4 wen i did all these.
1. Unlocked bootloader and flashed twrp 2.8.7.0.
2. Downloaded the latest PA build from here "http://forum.xda-developers.com/showthread.php?t=2614690"
3. And downloaded pico gapps.
4. When i flashed the rom it told that the bootloader is out of date. So i updated the bootloader following this thread "http://forum.xda-developers.com/moto-g/general/falcon-bootloader-upgrader-tool-t3093793"
5. And when i flashed the rom it was flashed fine. And the gapps and supersu also.
But when i reboot it stucks in bootscreen. I tried wiping and flashing once again. It doesnt work. The bootloader and the recovery are remaining safe and good.
Shud i try a new different ROM or is there any problem with my procedure.. ???
The current bootloader version is 41.18. Moto g phones using 5.1.1 had bootloader version as 41.1A. Does this make a difference..?
Try another rom like aicp or euphoria
Hey my moto g3 cm 12.1 camera pictures taken with flash are black panorama pictures appear orange and slow mo is not working
deepakramji said:
The current bootloader version is 41.18. Moto g phones using 5.1.1 had bootloader version as 41.1A. Does this make a difference..?
Click to expand...
Click to collapse
No 41.18 is still fine (it also can be used for marshmallow ROMs e. g. CM 13 or CyanPop)!
deepakramji said:
Hi all
In order to use a custom rom , I did the following with my moto g XT1033.
It was running on android 4.4.4 wen i did all these.
1. Unlocked bootloader and flashed twrp 2.8.7.0.
2. Downloaded the latest PA build from here "http://forum.xda-developers.com/showthread.php?t=2614690"
3. And downloaded pico gapps.
4. When i flashed the rom it told that the bootloader is out of date. So i updated the bootloader following this thread "http://forum.xda-developers.com/moto-g/general/falcon-bootloader-upgrader-tool-t3093793"
5. And when i flashed the rom it was flashed fine. And the gapps and supersu also.
But when i reboot it stucks in bootscreen. I tried wiping and flashing once again. It doesnt work. The bootloader and the recovery are remaining safe and good.
Shud i try a new different ROM or is there any problem with my procedure.. ???
Click to expand...
Click to collapse
Did you root your device after you unlock your bootloader? Maybe you can try to flash supersu first then try to reflash rom and gapps.