Hi All,
I have XT1033 Dual Sim (Currently running CM12 Official Build - Latest Nightly).
I tried to install Android 5.1 based roms like (Team UB rome and unofficial build of CM12.1). I alo flashed the Gapps (Android 5.1) I used Philz recovery to flash the same.
Flashing was successful. But when I come to the setup part then i got error "com.android.phone has stopped working" at language selection page.
After that i come to the wi-fi selection page. There i selected skip and i got error "Setup has stopped working". and it again redirect me to language selection page. I get stuck in the loop.
Could anyone please help me to resolve this issue on XT1033 Dual sim device.
Hmmm... Strange. You see did you have trouble flashing CM12? If you didn't, try a different recovery (providing you know how to install)
Sam.
SamTenny said:
Hmmm... Strange. You see did you have trouble flashing CM12? If you didn't, try a different recovery (providing you know how to install)
Sam.
Click to expand...
Click to collapse
I tried both Philz and TWRP recovery. Both of them giving me the mentioned error after flashing and the booting of ROM
Did anyone try installing android 5.1 rom based on CM12.1 in XT1033 Dual Sim.
If yes, could you please provide me the recovery.img file you are using for this.
Is this problem because of i am at CM12 and then trying flashing CM12.1 ROM.
Do i need to go back to Stock 5.0.2 and then try to install CM12.1 rom.
Related
Hello guys a complete noob here, have flashed the latest nightly build of cm-11-20140730-NIGHTLY-falcon on my Dual Sim Moto G retail Asia (India), everything seems to work fine except for Mobile Data connection, there seems to be no response while selecting the APN settings or turning mobile data, have read somewhere there was an issue, wish I had read it earlier.
So is there a work around for turning on mobile data on cm11 nightly builds for xt1033 on Indian networks ?
Or is flashing stock rom the only option left ?
Kindly guide me on getting my stock rom back and working.
Thanks in advance !
Try reflashing cm or any other rom....
Sent from my XT1033
jbanti said:
Try reflashing cm or any other rom....
Sent from my XT1033
Click to expand...
Click to collapse
Reflashed CM ROM thrice, doesnt seem to work, tried reflashing 4.4.2 stock rom, getting an install aborted (expected signature to be 4.3 error) on CMW recovery, my phone came with 4.3 out of the box, so do i have to flash 4.3 stock rom to get my phone back to normal or will 4.4.2 stock rom work ?
Thanks in advance !
kailash9999 said:
Reflashed CM ROM thrice, doesnt seem to work, tried reflashing 4.4.2 stock rom, getting an install aborted (expected signature to be 4.3 error) on CMW recovery, my phone came with 4.3 out of the box, so do i have to flash 4.3 stock rom to get my phone back to normal or will 4.4.2 stock rom work ?
Thanks in advance !
Click to expand...
Click to collapse
Try other rom than CM, maybe it will work.
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
kidstretch said:
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
JeffDC said:
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
Click to expand...
Click to collapse
Yes I can, managed to install MIUI only, latest version.
I also installed Multirom again (on MIUI) and it downloaded cm11s kernel).
Ok managed to go back to my old miui os, now I have 2 miui os and no cm11, also downloaded the Franco kernel 30. How can i check if the cm11 that i had before is still there, if not how can i install it again without screwing my already working miui?
update:
After some tests, this is what's happening.
I believe I have no CM11S on my phone, that is gone!
I have the MIUI V5 running, but when i flash the franco kernel, the phone is stuck on boot (1+1 logo), i have to flash the kernel_kexec_bacon_cm11s to make it boot in MIUI (working).
So, now i have a working rom that works through Mutlirom and I cannot flash a working CM11S rom on the phone.
Any help would be great guys!
I am unable to flash cm12 rom on moto g gpe as it was already on android stock 5.0.1 .But when im trying to flash cm11 latest nightly it works and when i trying to flash cm12 ooficial rom it says error and getting failed ,i tried on many recoveries .pls help me out and im tried of trying .....................
Can you check something out? Flash cm11 and the dirty flash cm12 that must work
i tried but didn't workout and in cm11 it shows no updates available.....
karthik432 said:
i tried but didn't workout and in cm11 it shows no updates available.....
Click to expand...
Click to collapse
No. Download the CM12 separately and dirty flash it from recovery over CM11.
SaurabhSandav said:
No. Download the CM12 separately and dirty flash it from recovery over CM11.
Click to expand...
Click to collapse
i tried but it stops in middle and says error and what to do
So, I had Asia 5.0.2 and I saw a FIUI ROM for our device at the MIUI forums. I decided to give this a go and first downgraded to KK and then tried to flash the zip from TWRP and Philz recovery but got this error:
"Can't install this package on top of incompatible data. Please try another package or run a factory reset"
I thought it might be a ROM specific error, but I also tried to flash CM11 but got the same error. How can I get around this? Is this an issue with the updater script or something?
Any help will be appreciated.
prateektaneja said:
So, I had Asia 5.0.2 and I saw a FIUI ROM for our device at the MIUI forums. I decided to give this a go and first downgraded to KK and then tried to flash the zip from TWRP and Philz recovery but got this error:
"Can't install this package on top of incompatible data. Please try another package or run a factory reset"
I thought it might be a ROM specific error, but I also tried to flash CM11 but got the same error. How can I get around this? Is this an issue with the updater script or something?
Any help will be appreciated.
Click to expand...
Click to collapse
Did you do a factory reset from the recovery menu?
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
faheemakbar18 said:
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
Click to expand...
Click to collapse
Here ist what i have experienced:
I was on System Version: 181.46.3
Well nevertheless:
It was the most recent version i could get and i wanted to get back to Android L.
I installed CM12 the Following way, I had a lot of problems with that. So here is my experience and everything:
So you need to know, to install CM12 or other CM12 based ROMS you first need to have CM11 installed.
Newer Versions of the recovery might be having problems installing CM11, so i would recommend using PhilZ Touch Recovery. It was working for me.
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
faheemakbar18 said:
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
Click to expand...
Click to collapse
Heyho
I have an XT925.
I installed the msm8960 Build.
The Reason i used the unified Build was, there is no KKBL build for the xt925.
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
faheemakbar18 said:
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
Click to expand...
Click to collapse
Hey Faheem,
i used the latest one, i guess
Found it here.
Link in my first Post was wrong
esok44 said:
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
Click to expand...
Click to collapse
If you come frome OTA Kitkat 4.4.2
you have to change Step 1st: install PhilZ recovery ------ to ------ Install TWRP2710-RAZR-HD_M-KITKAT.img instead then you can flash the CM 11
If you like philz_touch_6.58.7-moto_msm8960.img recovery (it can mount external Memory Card as USB) you can flash it after all installations after Point 11. The only thing that you cannot start directly to recovery from CM 12.1