Hello guys a complete noob here, have flashed the latest nightly build of cm-11-20140730-NIGHTLY-falcon on my Dual Sim Moto G retail Asia (India), everything seems to work fine except for Mobile Data connection, there seems to be no response while selecting the APN settings or turning mobile data, have read somewhere there was an issue, wish I had read it earlier.
So is there a work around for turning on mobile data on cm11 nightly builds for xt1033 on Indian networks ?
Or is flashing stock rom the only option left ?
Kindly guide me on getting my stock rom back and working.
Thanks in advance !
Try reflashing cm or any other rom....
Sent from my XT1033
jbanti said:
Try reflashing cm or any other rom....
Sent from my XT1033
Click to expand...
Click to collapse
Reflashed CM ROM thrice, doesnt seem to work, tried reflashing 4.4.2 stock rom, getting an install aborted (expected signature to be 4.3 error) on CMW recovery, my phone came with 4.3 out of the box, so do i have to flash 4.3 stock rom to get my phone back to normal or will 4.4.2 stock rom work ?
Thanks in advance !
kailash9999 said:
Reflashed CM ROM thrice, doesnt seem to work, tried reflashing 4.4.2 stock rom, getting an install aborted (expected signature to be 4.3 error) on CMW recovery, my phone came with 4.3 out of the box, so do i have to flash 4.3 stock rom to get my phone back to normal or will 4.4.2 stock rom work ?
Thanks in advance !
Click to expand...
Click to collapse
Try other rom than CM, maybe it will work.
Related
Hi
Just moved onto the Moto G from a couple of Huawei devices, G300 then Y300... (bye bye Modaco!) - So I'm pretty used to flashig, wiping etc using TWRP and CWM...
Anyhow, got the Moto G (XT1033), booloader unlocked, done a full restore to clean 4.2 and let it update to 4.4 fine, no problems.
Installed the latest CWM, got root, all fine... again, no problems...
But EVERY rom I try - slim, CM11, always install OK but on booting come up with phone process failures and I have to abandon.
I tried putting the 422 modem zip from the CM11 thread on, made no difference.
So I've rewiped back to stock and updated to 4.4.2, and flashed CWM, but still can't install a custom rom, getting the phone process error on startup.
Any suggestions?
Resolved myself! Revert to factory, install CWM and flash new roms without doing the ota to kitkat first.
TangerineTractor said:
Resolved myself! Revert to factory, install CWM and flash new roms without doing the ota to kitkat first.
Click to expand...
Click to collapse
So you installed CM11 from stock jelly bean??
Sent from my XT1032 using Tapatalk
xheon said:
So you installed CM11 from stock jelly bean??
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Yes. Originally I let it run through the ota update, then installed CWM and tried to install various roms. All gave me a FC on outdoor process as soon as I booted.
tried again with TWRP, same thing. third time lucky, I restored to factory, let it boot but didn't do the ota update, installed CWM for 4.3 bootloader, and all has been find since, flashed several roms with no problems.
So you have a dual SIM version and you flashed a custom ROM which means only one SIM works now. Am I right? How is everything else, no issues with performance just because yours is a dual SIM variant?
I have a rooted Moto G phone. It is android 4.3 , I cant update it to 4.4.2 Kitkat for some reason.
I saved Kitkat to the SD Card, loaded into Recovery mode on the MOTO, then tried to install Android 4.4.2 from the .zip file
saved on the SD card in my phone.
I cant get this to work and i tried to install CARBON ROM the same way with out any results.. it says ERROR and fails to install.
Any help would be greatly appreciated.
ALSO does android need to be updated to 4.4.2 to install CARBON ROM?
Thanks
I don't know but maybe can help...
I could update successfully to last minor 176.44.1 update only after flashing stock recovery.img from my exact stock ROM.
after rooting process on KitKat motoG my recovery was modified, restoring the stock one worked for me. I just updated ota normally in WiFi without problems.
after that I flashed cwm recovery.
I restored to stock recovery and removed root. After that applied KitKat OTA, then flashed custom recovery and re-rooted.
Sent from my Moto G using Tapatalk
this involve wiping of all data and a factory reset, so first try just restoring the stock recovery.
If not working make a good backup first.
If the phone is rooted, OTA updates do not work afaik...
gymfreak81 said:
ALSO does android need to be updated to 4.4.2 to install CARBON ROM?
Thanks
Click to expand...
Click to collapse
Flashing a ROM overwrites system partition completely. You could have android version 1 running and still just flash another ROM
Hi, I necessarily need GPE 4.4.4 ROM, because firstl install this ROM: http://forum.xda-developers.com/showthread.php?t=2646404 and received 4.4.4 OTA. Then I try install other ROM (4.4.2) and phone is half-brick, I can go to bootloader and recovery, system no works. I find this: http://forum.xda-developers.com/moto-g/help/recover-4-4-4-downgrade-brick-temporal-t2801946 , but not help for me. Only ROM, which work is Official CyanogenMod 11, but in CM not work GSM for me :/
P. S: sorry for my english
Jakub Ch. said:
Hi, I necessarily need GPE 4.4.4 ROM, because firstl install this ROM: http://forum.xda-developers.com/showthread.php?t=2646404 and received 4.4.4 OTA. Then I try install other ROM (4.4.2) and phone is half-brick, I can go to bootloader and recovery, system no works. I find this: http://forum.xda-developers.com/moto-g/help/recover-4-4-4-downgrade-brick-temporal-t2801946 , but not help for me. Only ROM, which work is Official CyanogenMod 11, but in CM not work GSM for me :/
P. S: sorry for my english
Click to expand...
Click to collapse
Try to use this http://forum.xda-developers.com/moto-g/general/unbrick-method-t2794271
Not work. I need 4.4.4 ROM... When I flash CyanogenMod 11 (4.4.4), phone boot Ok. Whne I flash different ROM (based on 4.4.2 or 4.4.3) - not work.
EDIT: RESOLVED!!!
Jakub Ch. said:
Not work. I need 4.4.4 ROM... When I flash CyanogenMod 11 (4.4.4), phone boot Ok. Whne I flash different ROM (based on 4.4.2 or 4.4.3) - not work.
EDIT: RESOLVED!!!
Click to expand...
Click to collapse
Please let us know how you resolved this!
In the end - no way :/
Flash: http://forum.xda-developers.com/showthread.php?t=2626803, V1. Phone start ok, but when I recieve 4.4.4 OTA update, during instalation, error message and finished. :/ No way to update 4.4.4, OTA not work and install from zip not work - same error. I try install this ROm V2
- but wifi not work (all V2 version).
I found http://forum.xda-developers.com/moto-g/development/rom-4-4-4-gpe-using-philz-recovery-t2806546 and install this. Ok, phone start, but NO WIFI! :/ . I try this: (i) No Wifi after flashing Stock Kernel? Flash 'Stock Kernel Modules.', not work.
O think: I need backup from 4.4.4 phone. Can you help me, please? Thank You.
What about using this recovery backup?
[rom][nandroid backup] 4.4.4 gpe using philz recovery
http://forum.xda-developers.com/showthread.php?t=2806546
I try this, but wifi not work :/ This is based on "V2" GPE ROM... I need backup 4.4.4 based on ONLY "V1" ROM
I Have similar problem and im trying to fix it... if i find something i will let you know I know a way how to unbrick your phone until theres a full fix.... im gonna upload my cwm backup
Do you upload your's backup to Google Drive or other cloud? And do you have GPE 4.4.4 backup?
Thank You very much!!!
Sorry for my bad english
Jakub Ch. said:
Do you upload your's backup to Google Drive or other cloud? And do you have GPE 4.4.4 backup?
Thank You very much!!!
Sorry for my bad english
Click to expand...
Click to collapse
Im uploading to my gdrive for fast downloading but i will take a while because of my upload speed... It's Stock Rom Motorola 4.4.2 but this method i will post later should work for most cwm backups
its better than a half bricked phone
Ok, thank you. And OTA update to 4.4.4 works?
I can install 4.4.2 GPE ROM (this, V1: http://forum.xda-developers.com/showthread.php?t=2626803) and phone start ok. But OTA update in't work, manuly update too. Error code is: This package is for falcon_umts devices, this is a "xt1032".
Is any way to flash ROM, which work ok and OTA works corretly?
don't know... my major point is to unbrick the phone!
Undestand you, but I try to fix Moto G completly. 4.4.4 backup is my only possibility, then were image GPE 4.4.4...
Hi All,
I have XT1033 Dual Sim (Currently running CM12 Official Build - Latest Nightly).
I tried to install Android 5.1 based roms like (Team UB rome and unofficial build of CM12.1). I alo flashed the Gapps (Android 5.1) I used Philz recovery to flash the same.
Flashing was successful. But when I come to the setup part then i got error "com.android.phone has stopped working" at language selection page.
After that i come to the wi-fi selection page. There i selected skip and i got error "Setup has stopped working". and it again redirect me to language selection page. I get stuck in the loop.
Could anyone please help me to resolve this issue on XT1033 Dual sim device.
Hmmm... Strange. You see did you have trouble flashing CM12? If you didn't, try a different recovery (providing you know how to install)
Sam.
SamTenny said:
Hmmm... Strange. You see did you have trouble flashing CM12? If you didn't, try a different recovery (providing you know how to install)
Sam.
Click to expand...
Click to collapse
I tried both Philz and TWRP recovery. Both of them giving me the mentioned error after flashing and the booting of ROM
Did anyone try installing android 5.1 rom based on CM12.1 in XT1033 Dual Sim.
If yes, could you please provide me the recovery.img file you are using for this.
Is this problem because of i am at CM12 and then trying flashing CM12.1 ROM.
Do i need to go back to Stock 5.0.2 and then try to install CM12.1 rom.
Hi, please I would like to install a ROM in my moto g 4g xt1040. Once I tried to install slim kat and it worked good. I used twrp recovery with my device rooted to flash slimkat ROM... Then I notice that there was a ROM , cyanogen mod 12, and I tried to flash it as I did with slimkat. But I did something wrong because it booted normal, but the screen was flickering, and I had no signal. So I had to get back to stock ROM. I restore a stock rom i found here in moto g 4g section, then I installed twrp recovery again, but I could not root my phone anymore, there was a message ( root missing , do you wish to install root , or you will lose root. I tried to install cwm recovery , but it was the same. I think that the stock ROM I flashed to restore my phone is not okay. I can not flash any other ROM anymore.
Someone can help me please. Maybe I am doing something wrong. If someone need more information, just ask me.
Thanks a lot ( sorry for my english)( new a world of rooms)
Sent from my XT1040 using XDA Free mobile app
Hey, did you try re locking the bootloader and then unlocking it? And when you went to cm 12, why didn't you go back to slim kat?
Sent from my XT1064 using Tapatalk
Hello, I did not re locked the bootloader and locked it again. I have read something about update the bootloader, but I dont know exactly what to do first.
I didnt go back to slimkat because I have no signal for 3g ... When I set the APN a put all the necesary values for it, but when I put save it dessappered. The ROM didnt save the APN . that is why I tried CM 12, but my screen was flickering and I had no signal. The ROM didnt recognize me the sim card.
I tried to restore to stock my phone, and I installed stock brazil ROM( I am from Perú ), but after that I could not root my phone anymore.
I tried these roms for my moto g after installing stock brazil ROM with no root access.
CM12
SLIM 5.1
RESURECTION REMIX
PARANOID ANDROID.
all of them didnt boot or the screen flickered. In some cases there was a screen of " encryptation was not complete, restore to fábric and reboot" ( I think that is the message) .
If you can help me to install a ROM for my phone , or a stock ROM but with root.
Thank you
Sent from my XT1040 using XDA Free mobile app