CM12 Official!
Guys those who have flashed Official CM12 on XT1033 couldnt get signal in it.
Problem can be solved By The following steps:
Convert the XT1033 to GPe 4.4.2(Not 4.4.4) Click Here to know how to do that.
Flash the latest TWRP recovery. Please dont use Colockworkmod recovery, it didnt work for me.. Link is here
Flash the latest CM12 from Here
Flash the Lollipop gapps from Here
Flash Donkey kernel from Here (This is required to get a signal)
Reboot and enjoy!!
All the above files are not mine!!
The above process worked for my XT1033 Asia Moto G
Am not responsible for anything that happens to your phone. Use at your risk.
Related
Hi, I necessarily need GPE 4.4.4 ROM, because firstl install this ROM: http://forum.xda-developers.com/showthread.php?t=2646404 and received 4.4.4 OTA. Then I try install other ROM (4.4.2) and phone is half-brick, I can go to bootloader and recovery, system no works. I find this: http://forum.xda-developers.com/moto-g/help/recover-4-4-4-downgrade-brick-temporal-t2801946 , but not help for me. Only ROM, which work is Official CyanogenMod 11, but in CM not work GSM for me :/
P. S: sorry for my english
Jakub Ch. said:
Hi, I necessarily need GPE 4.4.4 ROM, because firstl install this ROM: http://forum.xda-developers.com/showthread.php?t=2646404 and received 4.4.4 OTA. Then I try install other ROM (4.4.2) and phone is half-brick, I can go to bootloader and recovery, system no works. I find this: http://forum.xda-developers.com/moto-g/help/recover-4-4-4-downgrade-brick-temporal-t2801946 , but not help for me. Only ROM, which work is Official CyanogenMod 11, but in CM not work GSM for me :/
P. S: sorry for my english
Click to expand...
Click to collapse
Try to use this http://forum.xda-developers.com/moto-g/general/unbrick-method-t2794271
Not work. I need 4.4.4 ROM... When I flash CyanogenMod 11 (4.4.4), phone boot Ok. Whne I flash different ROM (based on 4.4.2 or 4.4.3) - not work.
EDIT: RESOLVED!!!
Jakub Ch. said:
Not work. I need 4.4.4 ROM... When I flash CyanogenMod 11 (4.4.4), phone boot Ok. Whne I flash different ROM (based on 4.4.2 or 4.4.3) - not work.
EDIT: RESOLVED!!!
Click to expand...
Click to collapse
Please let us know how you resolved this!
In the end - no way :/
Flash: http://forum.xda-developers.com/showthread.php?t=2626803, V1. Phone start ok, but when I recieve 4.4.4 OTA update, during instalation, error message and finished. :/ No way to update 4.4.4, OTA not work and install from zip not work - same error. I try install this ROm V2
- but wifi not work (all V2 version).
I found http://forum.xda-developers.com/moto-g/development/rom-4-4-4-gpe-using-philz-recovery-t2806546 and install this. Ok, phone start, but NO WIFI! :/ . I try this: (i) No Wifi after flashing Stock Kernel? Flash 'Stock Kernel Modules.', not work.
O think: I need backup from 4.4.4 phone. Can you help me, please? Thank You.
What about using this recovery backup?
[rom][nandroid backup] 4.4.4 gpe using philz recovery
http://forum.xda-developers.com/showthread.php?t=2806546
I try this, but wifi not work :/ This is based on "V2" GPE ROM... I need backup 4.4.4 based on ONLY "V1" ROM
I Have similar problem and im trying to fix it... if i find something i will let you know I know a way how to unbrick your phone until theres a full fix.... im gonna upload my cwm backup
Do you upload your's backup to Google Drive or other cloud? And do you have GPE 4.4.4 backup?
Thank You very much!!!
Sorry for my bad english
Jakub Ch. said:
Do you upload your's backup to Google Drive or other cloud? And do you have GPE 4.4.4 backup?
Thank You very much!!!
Sorry for my bad english
Click to expand...
Click to collapse
Im uploading to my gdrive for fast downloading but i will take a while because of my upload speed... It's Stock Rom Motorola 4.4.2 but this method i will post later should work for most cwm backups
its better than a half bricked phone
Ok, thank you. And OTA update to 4.4.4 works?
I can install 4.4.2 GPE ROM (this, V1: http://forum.xda-developers.com/showthread.php?t=2626803) and phone start ok. But OTA update in't work, manuly update too. Error code is: This package is for falcon_umts devices, this is a "xt1032".
Is any way to flash ROM, which work ok and OTA works corretly?
don't know... my major point is to unbrick the phone!
Undestand you, but I try to fix Moto G completly. 4.4.4 backup is my only possibility, then were image GPE 4.4.4...
I am unable to flash cm12 rom on moto g gpe as it was already on android stock 5.0.1 .But when im trying to flash cm11 latest nightly it works and when i trying to flash cm12 ooficial rom it says error and getting failed ,i tried on many recoveries .pls help me out and im tried of trying .....................
Can you check something out? Flash cm11 and the dirty flash cm12 that must work
i tried but didn't workout and in cm11 it shows no updates available.....
karthik432 said:
i tried but didn't workout and in cm11 it shows no updates available.....
Click to expand...
Click to collapse
No. Download the CM12 separately and dirty flash it from recovery over CM11.
SaurabhSandav said:
No. Download the CM12 separately and dirty flash it from recovery over CM11.
Click to expand...
Click to collapse
i tried but it stops in middle and says error and what to do
My Moto G is XT1033 varient. I didnt converted it into GPE. Its just normal XT1033 out of box. I unlocked the bootloader and then flash TWRP (2.8.0.1-xt1032) recovery to install CM12. But when i booted into recovery, i got flickering screen. Then i flashed Philz Touch (philz_touch_6.58.7-falcon) and installed CM 12 official by wiping data, system and cache. But i cant get pass through the boot logo. Is there any way to get latest TWRP for XT1033 varient. How can i flash CM 12 in my XT1033 varient without converting it into GPE.
Flash CM11 first. Then flash CM12 over it. Though dual sim is not working on XT1033.
Ok. If i flashed CM 12 through CM 11 will i get one sim working?
Anyway, in CM12 thread, they mentioned that we need L compatible recovery. What will happen if i flashed CM11 using Philz (Which i think Kitkat compatible recovery.) Will it work on Lollipop. And since, i trapped in bootscreen, how can i flash CM11 without copy it to my mobile. Thanks.
I downloaded CM 11. But i cant copy that to my mobile, since it cant surpass the boot screen. i tried adb sideload and adb push. But permission denied. Please help me on this.
Y:cool: said:
Ok. If i flashed CM 12 through CM 11 will i get one sim working?
Anyway, in CM12 thread, they mentioned that we need L compatible recovery. What will happen if i flashed CM11 using Philz (Which i think Kitkat compatible recovery.) Will it work on Lollipop. And since, i trapped in bootscreen, how can i flash CM11 without copy it to my mobile. Thanks.
Click to expand...
Click to collapse
1. No dual sim or just one sim in slot will not work
2. I used philz to flash cm12 and had no problems.
So you didnt convert XT1033 to GPE?
How long it will take to boot up for first time?
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
faheemakbar18 said:
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
Click to expand...
Click to collapse
Here ist what i have experienced:
I was on System Version: 181.46.3
Well nevertheless:
It was the most recent version i could get and i wanted to get back to Android L.
I installed CM12 the Following way, I had a lot of problems with that. So here is my experience and everything:
So you need to know, to install CM12 or other CM12 based ROMS you first need to have CM11 installed.
Newer Versions of the recovery might be having problems installing CM11, so i would recommend using PhilZ Touch Recovery. It was working for me.
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
faheemakbar18 said:
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
Click to expand...
Click to collapse
Heyho
I have an XT925.
I installed the msm8960 Build.
The Reason i used the unified Build was, there is no KKBL build for the xt925.
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
faheemakbar18 said:
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
Click to expand...
Click to collapse
Hey Faheem,
i used the latest one, i guess
Found it here.
Link in my first Post was wrong
esok44 said:
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
Click to expand...
Click to collapse
If you come frome OTA Kitkat 4.4.2
you have to change Step 1st: install PhilZ recovery ------ to ------ Install TWRP2710-RAZR-HD_M-KITKAT.img instead then you can flash the CM 11
If you like philz_touch_6.58.7-moto_msm8960.img recovery (it can mount external Memory Card as USB) you can flash it after all installations after Point 11. The only thing that you cannot start directly to recovery from CM 12.1
Hi all
In order to use a custom rom , I did the following with my moto g XT1033.
It was running on android 4.4.4 wen i did all these.
1. Unlocked bootloader and flashed twrp 2.8.7.0.
2. Downloaded the latest PA build from here "http://forum.xda-developers.com/showthread.php?t=2614690"
3. And downloaded pico gapps.
4. When i flashed the rom it told that the bootloader is out of date. So i updated the bootloader following this thread "http://forum.xda-developers.com/moto-g/general/falcon-bootloader-upgrader-tool-t3093793"
5. And when i flashed the rom it was flashed fine. And the gapps and supersu also.
But when i reboot it stucks in bootscreen. I tried wiping and flashing once again. It doesnt work. The bootloader and the recovery are remaining safe and good.
Shud i try a new different ROM or is there any problem with my procedure.. ???
The current bootloader version is 41.18. Moto g phones using 5.1.1 had bootloader version as 41.1A. Does this make a difference..?
Try another rom like aicp or euphoria
Hey my moto g3 cm 12.1 camera pictures taken with flash are black panorama pictures appear orange and slow mo is not working
deepakramji said:
The current bootloader version is 41.18. Moto g phones using 5.1.1 had bootloader version as 41.1A. Does this make a difference..?
Click to expand...
Click to collapse
No 41.18 is still fine (it also can be used for marshmallow ROMs e. g. CM 13 or CyanPop)!
deepakramji said:
Hi all
In order to use a custom rom , I did the following with my moto g XT1033.
It was running on android 4.4.4 wen i did all these.
1. Unlocked bootloader and flashed twrp 2.8.7.0.
2. Downloaded the latest PA build from here "http://forum.xda-developers.com/showthread.php?t=2614690"
3. And downloaded pico gapps.
4. When i flashed the rom it told that the bootloader is out of date. So i updated the bootloader following this thread "http://forum.xda-developers.com/moto-g/general/falcon-bootloader-upgrader-tool-t3093793"
5. And when i flashed the rom it was flashed fine. And the gapps and supersu also.
But when i reboot it stucks in bootscreen. I tried wiping and flashing once again. It doesnt work. The bootloader and the recovery are remaining safe and good.
Shud i try a new different ROM or is there any problem with my procedure.. ???
Click to expand...
Click to collapse
Did you root your device after you unlock your bootloader? Maybe you can try to flash supersu first then try to reflash rom and gapps.