Database Info

PreLoader

Alright so, I'm trying to flash my QMobile Noir A2, also known as MyPhone A818 also known as MicroMax A45 PUNK. But qMobile is different, same firmware but when i turn off the phone, remove batter, re insert and plug it in. PC Detects the "MT65x PreLoader" And so does the SP Flash tool which I use to flash a custom ROM (Pre-Rooted) to the phone. But then, my phone shows the battery charging logo and PC no longer detects it. Is there anyway I can get around this? I tried EVERY method of rooting so please don't mention that.
Thanks

HOLY ****Z
Also, my phones using MT6575 processor which is better than MicroMax's MT6563 processer, I tried rooting using the MT6563 method and flashing but again as mentioned above. PreLoader won't work

Have you solved it yet?

The Prince1 said:
Have you solved it yet?
Click to expand...
Click to collapse
NO

rayyan777 said:
no
Click to expand...
Click to collapse
help me someone. I tried every method, pc just detects then undetects preloader drivers

rayyan777 said:
help me someone. I tried every method, pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
somebody help dammit this is so annoying why wont anyone help?!

Rayyan777 said:
somebody help dammit this is so annoying why wont anyone help?!
Click to expand...
Click to collapse
If someone knew how, they would help. No need to get angry and swear.

raayan how did u setup sp flashtool to flash rooted img on A2 i have also NOIR A2 but i always get the error cannot pass boot rom through usb error when i flash using sp flash tool how did u get pass that error plz inform me the correct method u use to flash ur a2 it will help us all plz share the method

mega_man said:
raayan how did u setup sp flashtool to flash rooted img on A2 i have also NOIR A2 but i always get the error cannot pass boot rom through usb error when i flash using sp flash tool how did u get pass that error plz inform me the correct method u use to flash ur a2 it will help us all plz share the method
Click to expand...
Click to collapse
megA_man, I get the SAME error now. It just says [BROM] Cannot pass boot rom command through usb. Please tell me if you have a solution!

[Q] [help] I may have bricked my Micromax a110

I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...

iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Go into recovery mode by first switching off your device. Then press volume up, down and power button all together to go into recovery when light flashes. Then you can try flashing stock rom and see what happens after that
OR
follow this guide
http://d-h.st/pt2

iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Hey Just Go to Recovery Mode Again and Do a Data Reset...
Thats all..

If you have bricked your phone you can flash it using sp flash tool with the stock rom.

hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now

I had the same probelm!!
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!

mayur.3.92 said:
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
Click to expand...
Click to collapse
Write ur imei by own.. how plz visit dis linkandroidforums.com/a75-all-things-root/542716-how-unbrick-a75-if-bricked-using-recovery.html
Sent from my Cynus T2 using xda app-developers app

Thanx but what about no am error being showed up as open wifi network

plz help stuck at recoverymode
imridul said:
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
Click to expand...
Click to collapse
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me

saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/showthread.php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/showthread.php?t=1960080 check the first post for the Stock V2 ROM

similar issue ,
Let me try what VipinKC says

un brick
ravee1010 said:
similar issue ,
Let me try what VipinKC says
Click to expand...
Click to collapse
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244

vjdsivakumar said:
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
Click to expand...
Click to collapse
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......

nice
ravee1010 said:
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
Click to expand...
Click to collapse
nice work enjoy

Bricked a110
Guyz, i recently installed CWM on my a110, but somhow while testing the features, i installed 12 mp patch and rebooted the phone. But it got stuck on the boot screen. And then i again went to CWM and done all this:
Fomat Data
Format System
Format Cache
And now its just hanged on to boot screen and am afraid that i have just done the biggest mistake.
Any help will be very thankful..
Plzz Reply Fast...

Similar but Different Problem
I may have a similar problem, big bros. Please check this thread. Sorry for bothering. I really need help.
http://forum.xda-developers.com/showthread.php?p=53004045

use
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
SP tool and flash stock rom through sp tools

If u have nandroid backtup then restore it
Sent from my A250 SUVI ROM v16 AURA using XDA Premium 4 mobile app

[Q]

I have followed the binary4 method for rooting my micromax a110 more than five times,it is not working.I have updated my phone to jelly bean and installed all the drivers in my pc.
Please help

varun09 said:
I have followed the binary4 method for rooting my micromax a110 more than five times,it is not working.I have updated my phone to jelly bean and installed all the drivers in my pc.
Please help
Click to expand...
Click to collapse
Buddy
This method is for ICS not for Jelly Bean for jelly bean you have to flash through SP Flashtool. For more details please visit the link given below:-
SP Flashtool Tutorialhttp://forum.xda-developers.com/showthread.php?t=2167244
Hit Thanks Instead of saying it....

As you have suggested me,I had followed the SP tool but i didn't get any green signal and the download is stuck at 0%.I am running my phone in the stock jelly bean rom and even imstalled the drivers provided by the phone.
Please help..

varun09 said:
As you have suggested me,I had followed the SP tool but i didn't get any green signal and the download is stuck at 0%.I am running my phone in the stock jelly bean rom and even imstalled the drivers provided by the phone.
Please help..
Click to expand...
Click to collapse
Bro,
The drivers provided by The manufacturer only works for windows XP only not for win7 or others.
Try installing VCOM drivers it do worked for me.
:thumbup::thumbup::thumbup:
Hit Thanks Instead of Saying It.....

can u give me the link for VCOM drivers for my phone.
Thankx

varun09 said:
can u give me the link for VCOM drivers for my phone.
Thankx
Click to expand...
Click to collapse
Bro,
The Link has been given in my First Reply of the Tutorial to Flash. There You can Find the Drivers there for VCOM Devices.
Hit Thanks Instead of Saying It....

thanks i install CWM recovery and rooted my phone.I installed chainfire 3D and it asked me to reboot my phone.Now my phone is stuck in a bootloop.i didnt even backup my data
I .Need Serious help

varun09 said:
thanks i install CWM recovery and rooted my phone.I installed chainfire 3D and it asked me to reboot my phone.Now my phone is stuck in a bootloop.i didnt even backup my data
I .Need Serious help
Click to expand...
Click to collapse
Good Job Buddy,
Now you are not a noob as you gone ahead and tried something. Good. And regarding the problem just flsh the same rom without clearing data. Dont do factory reset just flash the same rom and wipe dalvik cache.
Reboot and it will take time arround 10 mins to welcome you back then do first thing and back up your data through any app. Now you are good to go.
Hit Thanks Instead of Saying It.....

Can the above rooting method used for Canvas HD?

How to unbrick bricked Canvas 2

Today I am sharing my experience of my bricked C2, some time ago when I was trying another ROM and flashed it on my phone, my phone got bricked, even no cwm opening, no charging and nothing its like that phone is without battery and nothings works.
Then finally by a simple way I recovered my sweet C2
The way is
First Download latest SP flash tools
From here - thnkss to #aabidhashmi bro
http://forum.xda-developers.com/showthread.php?t=2650125
Then you will need a PC and your all phone softwares should be installed in PC,
Then download MMX a110 stock ROM
Thanks to Sanz_khan bro
http://d-h.st/zEb
And follow the method of flashing ROM using SP flash tools
Here is the method
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
Thnkss to androidxda
Now after flashing stock ROM you will find that your phone is Resurrected[emoji6]
Now Enjoy your phone its Unbricked.
Note- Don't remove battery while flashing but your phone should be permanently switched off.
If you find that SP flash tool is not recognizing your phone then use Samsung data cable instead of MMX data cable.
Hit thanks Button it will motivate me and it will not cost you[emoji6]
Major Credits XDA
Sent from my A110 using Tapatalk

Here's a video on how to use Sp flash tool
If SP Flash tool doesnt detect the phone then manually install vcom drivers as explained in the video below

avinash130413 said:
Today I am sharing my experience of my bricked C2, some time ago when I was trying another ROM and flashed it on my phone, my phone got bricked, even no cwm opening, no charging and nothing its like that phone is without battery and nothings works.
Then finally by a simple way I recovered my sweet C2
The way is
First Download latest SP flash tools
From here - thnkss to #aabidhashmi bro
http://forum.xda-developers.com/showthread.php?t=2650125
Then you will need a PC and your all phone softwares should be installed in PC,
Then download MMX a110 stock ROM
Thanks to Sanz_khan bro
http://d-h.st/zEb
And follow the method of flashing ROM using SP flash tools
Here is the method
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
Thnkss to androidxda
Now after flashing stock ROM you will find that your phone is Resurrected[emoji6]
Now Enjoy your phone its Unbricked.
Note- Don't remove battery while flashing but your phone should be permanently switched off.
If you find that SP flash tool is not recognizing your phone then use Samsung data cable instead of MMX data cable.
Hit thanks Button it will motivate me and it will not cost you[emoji6]
Major Credits XDA
Sent from my A110 using Tapatalk
Click to expand...
Click to collapse
Recently unfortunately i bricked my canvas2 and followed your procedure but i got this error during firmare upgrade. then i tried download option that is also has no luck. can you help me.

help!! q3000 sp tools "Enable DRAM FAILED"

Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:

AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
is it booting and can u go in recovery mode...

AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
Simply downgrade to Jelly bean!

Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
not booting.. not even showing charging.. sp tool says
Error 4032 (Enable DRAM FAILED).. no recovery.. :crying:

AAAni said:
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
Click to expand...
Click to collapse
Uninstall drivers from pc and reinstall them correctly, then flash it again.
Sent from my XOLO Q3000

not helping..:crying:

AAAni said:
not helping..:crying:
Click to expand...
Click to collapse
U need to flash whole stock rom either Jelly bean or kitkat as u like.
Xolo Q3000 KK S007 27-05-2014.zip
q3000 stock jb 4.2 s011.7z
download one of above as per ur chioce.
extract it in folder.
download sp flash tools.
Extract it in a folder.
Start sptools.exe
choose scatter loading.
select scatter file from above downloaded firmware folder.
select firmware upgrade.
press download
connect ur mobile in switch off condition.
wait till green circle appears.
Start u mobile.
U need drivers installed before the procedure.

tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:

AAAni said:
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
Click to expand...
Click to collapse
Just explain each step u doing from the very beginning?
Have u selected firmware upgrade option??
Also post some screenshots

My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?

AAAni said:
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
Click to expand...
Click to collapse
Just flash the "Xolo Q3000 KK S007 27-05-2014" firmware as normal, everything will be fine.
Just select firmware upgrade option.
These files are all base files including preloader and scatter ok.
Ur error is cause u formatted preloader , just restore preloader ur phone will boot. :good::good:
If still u cant do it, just PM me.

see this.. error remain same :crying::crying::crying:

Lets start from the base,
Which version of windows r u using & did u hv admin rights?
Sent from my XOLO Q3000 using XDA Free mobile app

tired windows 8.1 32bit & 64 bit, windows 7 32bit with administrative right

In windows 7, install 32 bit drivers, download so flash tool from mtk's official site and flash stock job if ur phone u received with jb ROM else flash kk rom. Flash phone without battery, sim n memory card. Also before flashing, connect our phone with battery inserted and power on. Look whether driver is installed. Drivers to install: mobistel cynus, vcom, pdanet and adb drivers.
Sent from my Q3000 using XDA Free mobile app

its better to take it xolo care..they might charge u but atleast u will get ur phone back...

Same thing happend to me ...
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
Click to expand...
Click to collapse
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...

davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
Click to expand...
Click to collapse
Please explain the procedure u followed mentioning the stock rom links.

avi3230 said:
Please explain the procedure u followed mentioning the stock rom links.
Click to expand...
Click to collapse
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... so i booted into recovery mode and tried to instal a backup to RESTORE the stock version of android, I was using before .... it failed to complete that and got bricked .....
Every tym i started the phone it got stuck in boot loop .... I tried to flash the stock rom (2 -3 times) ( which i flashed before and was using it )...
BUT NO LUCK ... it did the same bootloop thing ...I tried to enter custom recovery (after flashing philz recovery immediately after flashing the rom )...it worrked 2-3 times but after then, no luck , i wasn't able to boot into recovery also ...
SO I got fed-up and made A "WHOLE FORMAT FLASH" (using sp flash tools) ....
After that my device was detected as UNKNOWN DEVICE ... then i searched the forums and was able to install drivers FOR WINDOWS 8......
and i was able to flash again .... later i tried the rom " XOLO Q3000 KK S007 27-05-2014" and stock rom from some website (the one which i was using before)
and one more "XOLO Q3000 S003 15102013" both the first and last roms were given by (xda xolo q3000 member .... i dont remember his name .. but i guess you know him)
1 out of 5 times i am able to get into recovery mode (after flashing custom recovery ) ..... once in CR mode I tried to format INTERNAL SD and it showed " "ERROR : unable to format internal storage "
AND i did a memory test also and everything was good except ERROR: NAND FLASH NOT FOUND .....
.. THANKS IN ADVANCD .... PLz Help

davis.arkel said:
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... ........
Click to expand...
Click to collapse
follow this link.
use sptools.
if u use version 3 use firmware upgrrade option.
if u use version 5 use fomat+dowload option.