[q] not receiving ota updates - AT&T LG G3

So I flashed CM12 to my G3 and decided to restore to my stock ROM. The "system" part of the restore got stuck so I took the battery out and went to download mode (my phone is messed up at this point so i have to flash a fresh copy of stock) and flashed 10d to my phone coming from 10f. Everything has been working as it should except it is not receiving over-the-air updates. Keep in mind that my phone is working perfect as it did out of the box except i am not getting the 10f over-the-air update. I was "locked out" of checking for updates and I have to wait 24 hours to check again. The phone is un-rooted by the way. Thanks ahead of time for the answers!!!!!!!

Turn off Auto date and time and move the date up a day and check for updates again...
__________________
ITS OVER 9000!!!!

Solved
esimon311 said:
Turn off Auto date and time and move the date up a day and check for updates again...
__________________
ITS OVER 9000!!!!
Click to expand...
Click to collapse
I solved the issue with your solution before your response but thank you very much anyways!!!!!

Related

[Q] Missed my chance at the OTA update...

When I got up this morning the option to update was available so I went for it. Immediately I realized my mistake because I had rerooted the Xoom last night and of course the update failed. Now I have returned completely bak to stock expecting to be able to update. No dice.
I have tried changing the date to pull the option to update again still no dice. Just wondering if there are any other options to pull this update again or do I just have to wait?
Will it show back up?
Brenardo said:
When I got up this morning the option to update was available so I went for it. Immediately I realized my mistake because I had rerooted the Xoom last night and of course the update failed. Now I have returned completely bak to stock expecting to be able to update. No dice.
I have tried changing the date to pull the option to update again still no dice. Just wondering if there are any other options to pull this update again or do I just have to wait?
Will it show back up?
Click to expand...
Click to collapse
I went back to stock and no sign of the update either. guess we will just have to wait.
Lordao
I spoke with a VZW Tech support Rep tonight and was told that the devices are updated by device ID #'s. I was told that since I missed the update that if I did not receive the update by midnight tonight then it probably wasn't gonna happen.
I hope like hell he is wrong and I feel like chances are he is. But he got me just that much more nervous about loosing the chance to get the update yesterday morning

Trying to update from Froyo Stuck at 4% don't know how to stop

Title says it all. I am trying to update (from Froyo) with LG update tool. Everything seemed to go well but now its stuck at 4%. How do I go about disconnecting and trying again? We're talking right now....been stuck there according to elapsed time 1 hr 27 minutes. If I just disconnect the phone will I brick it?
http://forum.xda-developers.com/showthread.php?p=24910877#post24910877
Go to that post. It has what to do. I was stuck on it also. I did that.
Thanks for the reply. I ended up disconnecting it and removing the battery. When I turned it back on, it was still on the upgrade screen. Plugged it back in and it restatrted the download and completed it. I guess I'm on the new firmware now.
V21e?
Thats old. New baseband is v21y.
P.S: Sorry, didn't see you were on froyo before. Yeah then it did update it for you. Its just that a new firmware was made available from LG a while back.
So I should do it again?
No. You won't be able to. Its been pulled. Wait for a few weeks. If you are on stock rom, You will get OTA update to v21y from tmobile or LG.
I thought they reposted it yesterday, available for manual download? That's why I tried it today.....
Edit....OK I reread it on Tmobiles site.
http://support.t-mobile.com/docs/DOC-2362
OTA Update
The G2x will receive a notification that the update is available.
Select Update.
The update will install.
Once complete the phone will restart.
It says it will come to you. Go to your software update and see if it lets you update. I think its on their timing. Not yours. Then again, I am not with any US Carrier so i don't know how the update might work. Sorry.

[Q] Anyone know what the new AT&T LG G2 update is?

Got a notification this morning that there was a new update available for KitKat. I do not know what the update is as I postponed it. I am currently running KitKat 4.4.2 Kernel version 3.4.0. The build is D80020c. I am rooted. I have no other information except that it shows that an update is pending but it will not tell me what the update is and I do not know where to find out what it is.
Anyone have any ideas as to what this is? I am concerned because the last time an update rolled out, it soft bricked my rooted phone.
I spoke with tech support at AT&T and they claim that they do not know what it is and suggested that I call LG for an answer.....
NevetsDrassel said:
Got a notification this morning that there was a new update available for KitKat. I do not know what the update is as I postponed it. I am currently running KitKat 4.4.2 Kernel version 3.4.0. The build is D80020c. I am rooted. I have no other information except that it shows that an update is pending but it will not tell me what the update is and I do not know where to find out what it is.
Anyone have any ideas as to what this is? I am concerned because the last time an update rolled out, it soft bricked my rooted phone.
I spoke with tech support at AT&T and they claim that they do not know what it is and suggested that I call LG for an answer.....
Click to expand...
Click to collapse
Don't install it, it jacked up my phone. I was running the rooted mixed partition D80020c and I can't boot or get into download mode now. All I get it a constant reboot back to recovery. Cannot install another ROM, cannot restore a backup. My daughter was playing with my phone and pushed to continue with the install and now I'm trying to unscrew it.
Jank4AU said:
Don't install it, it jacked up my phone. I was running the rooted mixed partition D80020c and I can't boot or get into download mode now. All I get it a constant reboot back to recovery. Cannot install another ROM, cannot restore a backup. My daughter was playing with my phone and pushed to continue with the install and now I'm trying to unscrew it.
Click to expand...
Click to collapse
Is there any way to force a not install or deny it? The only option I have is to postpone the install and after 4 hours, it will run again and continue to run every 4 hours unless I find a way to break the cycle. How do I force a no install option?
That is what happened to me last time with the "q" update. I postponed the install (no option to not take it) and it installed itself after 4 hours when I left my phone on one night. I woke up to a bricked phone.....
NevetsDrassel said:
Is there any way to force a not install or deny it? The only option I have is to postpone the install and after 4 hours, it will run again and continue to run every 4 hours unless I find a way to break the cycle. How do I force a no install option?
That is what happened to me last time with the "q" update. I postponed the install (no option to not take it) and it installed itself after 4 hours when I left my phone on one night. I woke up to a bricked phone.....
Click to expand...
Click to collapse
I don't know how to permanently disable the update, but I'm sure there's a way. As info, I was able to easily fix my phone with the help of this thread posted by @thecubed: http://forum.xda-developers.com/showthread.php?t=2451696. I didn't read it all, but this might be what disables the update.
I'm not rooted. I took the latest update and all is fine. It's google+ fixes and Google wallet support. It actually let me set up tap & pay! I'll have to go somewhere to try it out.
Sent from my LG-D800 using Tapatalk
I got the notification too but figured that it would probably screw things up since I'm rooted and running TWRP so I did a little searching and came across this, http://forum.xda-developers.com/showpost.php?p=50454408&postcount=3 . It's been a few hours since I changed the setting and haven't seen the update notification again although AT&T pushed the update into CACHE/FOTA sometime this morning.
Well scratch that, the notification just came back. I'll try freezing it now.
Well if rooted just use TB to freeze software update. I am also running a mixed partition D80020c. I am on Straight Talk AT&T. Before rooting I tried taking the official OTA of KitKat but for some reason you can't enter an APN type so I couldn't get or send MMS. So I flashed back to the D firmware,rooted,added custom recovery,entered the APN type and then flashed the modified C firmware. You could also use Root Freezer instead of Titanium Backup to freeze

[Q] KitKat Update Issues

The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
dwcosby said:
The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
Click to expand...
Click to collapse
there have been quite a few people with this same issue. i havent seen any direct fix.
if you are locked, i would suggest you wait it out, or wait for the sbf file to get leaked. there is a way to sideload it, but its risky being locked and no sbf to save you if a problem comes up.
if you are unlocked, there are directions in the General forum to sideload the ota. there is no risk if you are unlocked.
if you are locked, the only thing i would suggest to try is re-flashing the stock 9.30.1 with rsd and see if it will pull the update afterwards. there is no guarantee this will work, but your phone will be 100% clean stock after the flash and give you the best chance to grab the ota if available.
dwcosby said:
The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
Click to expand...
Click to collapse
Did you download it and then said to apply it later? If so, are you rooted? If so, hook up your phone to your PC and adb shell into it. Type "su" and hit enter to go into superuser mode.
Navigate to the /cache directory and you should see the OTA .zip file sitting in there. Copy it to your external SD card and then you can load it manually via the recovery.
If you're not rooted, then you won't be able to navigate into the /cache directory. Or, if you didn't have it download when you got the notice (or couldn't download it), then it won't be there.
More update issues
My wife & son both have the HD. My wife checked for the update this morning, said it was ready and proceeded to download. Update did as it was supposed to and when it was done, she had KitKat and that's when things went a bit wonky.
If she has Bluetooth turned on, WiFi connection drops after a few minutes. She googled possible workarounds and none really worked. As long as she is not using BT, WiFi stays up
Has anyone else seen this behavior? She refuses to let me root it and install a custom ROM as I have done on my Samsung GS4 from VZW.
In the mean time, we've told our son not to take the update until
we know more about a possible fix.
zeb carter said:
My wife & son both have the HD. My wife checked for the update this morning, said it was ready and proceeded to download. Update did as it was supposed to and when it was done, she had KitKat and that's when things went a bit wonky.
If she has Bluetooth turned on, WiFi connection drops after a few minutes. She googled possible workarounds and none really worked. As long as she is not using BT, WiFi stays up
Has anyone else seen this behavior? She refuses to let me root it and install a custom ROM as I have done on my Samsung GS4 from VZW.
In the mean time, we've told our son not to take the update until
we know more about a possible fix.
Click to expand...
Click to collapse
Fix was just posted recently. do a factory reset. It sucks, but its the only option.
Factory REst doesn't solve 4.4.2 WIFI issue on Razor MAxx HD
TXKSSnapper said:
Fix was just posted recently. do a factory reset. It sucks, but its the only option.
Click to expand...
Click to collapse
Android V 4.1.2 worked flawlessly since Nov 1023 upgrade. Decided to upgrade to KitKat via OTH. Had WIFI connection issues right away ( inability to obtain IP or lost connection, etc.) This happened with Bluetooth ON or OFF, no difference. The Signal strength was much lower than when on the previous android version and subsequent indicated connection speed was at least 1/2 of what I was getting previously.
Worked with Verizon and Motorola tech support personnel and did multiple factory resets with no improvement.
Since I wanted a factory solution and had insurance on the phone, I ordered a replacement phone. Thankfully, the new phone had 4.1.2 and worked perfectly. WIFI issues are gone.
Conclusion, KitKat is not ready for prime time yet. WIFI bug needs to be worked out before I will upgrade again.
egutwillig said:
Android V 4.1.2 worked flawlessly since Nov 1023 upgrade. Decided to upgrade to KitKat via OTH. Had WIFI connection issues right away ( inability to obtain IP or lost connection, etc.) This happened with Bluetooth ON or OFF, no difference. The Signal strength was much lower than when on the previous android version and subsequent indicated connection speed was at least 1/2 of what I was getting previously.
Worked with Verizon and Motorola tech support personnel and did multiple factory resets with no improvement.
Since I wanted a factory solution and had insurance on the phone, I ordered a replacement phone. Thankfully, the new phone had 4.1.2 and worked perfectly. WIFI issues are gone.
Conclusion, KitKat is not ready for prime time yet. WIFI bug needs to be worked out before I will upgrade again.
Click to expand...
Click to collapse
That's a shame because for me, the FDR fixed the Wifi/Blue-tooth issue as it did for many others. Might have been a hardware issue (faulty radio, etc).

Shield tablet 5.1.1 OTA Fail during flash reboot (WiFi)

Hi all,
Hoping this is an easy fix someone has seen before.
I have a used 16gb wifi version that I'm trying to update to 5.1.1.
The OTA download works OK, but when it says flash and reboot, the progress bar only gets about 20% along and then shows an "Error" message over the robot.
Wiped the download and redone the OTA a few times with same results.
Not so concerned about getting the update as I am in trying to figure out if the device is part of the recall or not.
I think that the system may have been loaded with a custom ROM by the previous owner but it looks to be put back to factory. Don't know if it is left in a weird state of locked/unlocked/rooted or not or if that should matter.
Thanks
Ron
Make sure you are getting the full update. Should be more than 700 mb. In system update click the 3 dots and select the full ota.
Resolved- Thanks
frenziedfemale said:
Make sure you are getting the full update. Should be more than 700 mb. In system update click the 3 dots and select the full ota.
Click to expand...
Click to collapse
Hey, thanks.
I found this just before your reply by accident when my son wanted to try the update ONE MORE time and hit the 3 dots by mistake. Just caught the word "full' before the window closed and went back to give that a try.
All the other devices in the house are Nexus so this new device was a bit of an anomaly that I wasn't used to.
Update worked just fine but now looks like we wait for the recall replacement to come in
BR
Ron

Categories

Resources