Hi frinds!
Yesterday I flashed CM12 on my XT1039.
- unlook bootloader
- testing some recoverys (CWM / CWM Touch / CWM philz / TWRP 2.7 + 2.8)
- made two backups (from CWM philz / TWRP 2.8)
- finaly flashed recovery (TWRP 2.8)
- clean install CM12
So far, so god..
CM12.. Very nice work so far!!! To me at the moment a little to buggy, so I want to go back to stock ROM.
Some questions:
1.) What recovery works most stable? I had some problems with all of them. I flashed TWRP, it stuck at bootlogo about two minutes?!?!
2.) I've tried to flash stockROM from here, I've tried different downloads.. Anytime: flashing failed! Any idea's, why flashing these zip not works?
3.) o.k., so I've restored my backup. Now I see in PlayStore an update for the Motorola Update Service, in discription is written: ..needed for the coming update to Android 5.0.. BUT!!!!!!! --> PlayStore says: not compatible with my device?!?!?!
What is wrong there?! Maybe flashing an "absolut clean" StockROM (Point 2) can help?
thanks for your help!
Related
[T110] Tab3 lite 7" - SM-T110 - goyawifi - recov bootloop 40% resolved - philz 6.30.1
philz_touch_6.30.1-goyawifi.tar.md5
philz 6.30.1 goya wifi
The situation for SM-T110 users could be better. I want a stock ROM with working PhilZ, since custom ROMs are too poorly documented.
Though Philz recov "works" nicely (and roots the T110), there seems to be no way to fix the recov-bootloop (reboot goes back to recov, imposs to get to real Android GUI) other than to Odin-flash the stock-recov (recovery.tar.7z from this forum) and wipe cache. This was reported by numerous T110 users. Alternatively use Stock_recovery_T111_110.zip https://mega.co.nz/#!cAZCTAbY!Mwt5N58yxNFzMDDkA5Y2qq5SDr8laAcEBK8CkXi2W_Q by gr8nole Odin-less stock ROM.
But then you have no Philz anymore and cannot as easily make nandroid backups.
Certain custom ROMs seem to have custom-recov without bootloop, but afaik no one published the fix they must have found already.
So: SM-T100 users lack CWM , TWRP or PhilZ which works (more than once) without bootloop. With my T110, the first reboot from within latest PhilZ works (boots up Android GUI like usual) but the second & any further reboot from within PhilZ gets you stuck in bootloop.
CWM does not even reboot once properly like PhilZ does. So a quick way to get a rooted SM-T110 is to use philz_touch_6.30.1-goyawifi.tar.md5 just for rooting only and replace it with stock recov immediately after.
T110 is not supported by Towelroot or any other rooter afaik.
see http://forum.xda-developers.com/showpost.php?p=56446297&postcount=14 for a CWM workaround.
sorry state of affairs on the SM-T110
even tho the T110 should have hi sales numbers due to itz lo price of 90€ there is not so much out there in terms of dev stuff.
(dedicated "T110" stuff only)
ONLY WORKING !! non-bootlooping custom recov on T110 by paziusss : [SM-T11x] TWRP 2.6.3.0 for Tab3 lite
https://github.com/pazos/android_kernel_samsung_goyawifi
http://forum.xda-developers.com/showpost.php?p=59596472&postcount=1
every T110 user needs PAZIUSSS TWRP recov !!
custom ROM : installs with PAZIUSSS, but it wipes PAZIUSSS ! u must reflash PAZIUSSS after Criskelo install
[AROMA][ROM] CriskeloROM [v1.0][SM-T110]
http://forum.xda-developers.com/showthread.php?t=2766612
in Criskelo installer, there is a misleading install page in AROMA about wiping SDcard or /system, the two of which are confused and doesn't reflect a possible /system wipe done manually.
[ROM][T110][4.2.2] Stock NE4 Lite / Full (Rooted/Deodexed) [16th Aug '14]
http://forum.xda-developers.com/showthread.php?t=2780068
PAZIUSSS also installs "Dr. Ketan custom ROM" but I wasn't too impressed by it. at least it did not wipe PAZIUSSS like Criskelo did.
kernel:
[SM-T110][KERNEL] Andriva Custom Kernel 4.2.2
http://forum.xda-developers.com/gal.../sm-t110-andriva-custom-kernel-4-2-2-t3071180
no success report yet, documentation not really overabundant
see also :
Tab 3 software list: http://forum.xda-developers.com/showthread.php?t=2755532
main recov thread : http://forum.xda-developers.com/showthread.php?t=2674649
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
faheemakbar18 said:
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
Click to expand...
Click to collapse
Here ist what i have experienced:
I was on System Version: 181.46.3
Well nevertheless:
It was the most recent version i could get and i wanted to get back to Android L.
I installed CM12 the Following way, I had a lot of problems with that. So here is my experience and everything:
So you need to know, to install CM12 or other CM12 based ROMS you first need to have CM11 installed.
Newer Versions of the recovery might be having problems installing CM11, so i would recommend using PhilZ Touch Recovery. It was working for me.
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
faheemakbar18 said:
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
Click to expand...
Click to collapse
Heyho
I have an XT925.
I installed the msm8960 Build.
The Reason i used the unified Build was, there is no KKBL build for the xt925.
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
faheemakbar18 said:
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
Click to expand...
Click to collapse
Hey Faheem,
i used the latest one, i guess
Found it here.
Link in my first Post was wrong
esok44 said:
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
Click to expand...
Click to collapse
If you come frome OTA Kitkat 4.4.2
you have to change Step 1st: install PhilZ recovery ------ to ------ Install TWRP2710-RAZR-HD_M-KITKAT.img instead then you can flash the CM 11
If you like philz_touch_6.58.7-moto_msm8960.img recovery (it can mount external Memory Card as USB) you can flash it after all installations after Point 11. The only thing that you cannot start directly to recovery from CM 12.1
I have a p3113 ,as evryone suggested i tried a lot of p3110 lolipop roms.
Recently i tried to flash cm11 unoffcial version of android andi.
It says it cant flash the rom and says error in the zip file and( error 7 ) in recovery.
All this happens only for a kitkat rom but i can flash any other version of android like lolipop or jb.
Pls help me ..currently im on cm9 official build for p3113. I have a cwm recovery,version 6
update your revovery, you can download zip here: https://www.androidfilehost.com/?w=files&flid=25706 Flash it and reboot recovery, then it should work fine
iks8 said:
update your revovery, you can download zip here: https://www.androidfilehost.com/?w=files&flid=25706 Flash it and reboot recovery, then it should work fine
Click to expand...
Click to collapse
Thanks got it..
switch to TWRP
I would alse recomend TWRP. In my opinion runs better than cwm
hey guys. i have XPERIA T2 Ultra (D5303),4.3 android version that is rooted and with unlocked bootloader.I have 19.0.1.A.0.207 version and i want to install a custom recovery to it (CWM) but i cant find a working link for the .img file.Do you know any working link so i can download CWM.img file?thanks in advance!! (By the way i tried ROM MANAGER but a message appears saying5303 does not have an officially supported CWM Recovery yet.Have you installed a ClockworkMod based recovery manually?If i press yes it says confirm version and i have 2 options:ClockworkMod 2.x or ClockworkMod 3.x+)
User reported as solved. :good:
Thread closed.
Hello Everyone
I have installed TWRP 3.1.0 on my galaxy s2 and also Lineage 14.1 . So far so good . It wasn't that hard to install custom rom and recovery but i got an issue which is upgrading TWRP 3.1.0 to the latest version 3.2.3 . I did everything correct but it just does not update to latest version. Once i installed the recovery image then rebooted , TWRP disappeared and stock recovery showed up. I also installed TRWP app (installed img and flash to recovery etc.. ) as well but nothing worked.
My question is does Galaxy s2 support latest TWRP or is there anything else that i should do ? Please if you can share any solution to solve this or any suggestion to update TWRP to latest version.
Thank you
galaxys2ci said:
Hello Everyone
I have installed TWRP 3.1.0 on my galaxy s2 and also Lineage 14.1 . So far so good . It wasn't that hard to install custom rom and recovery but i got an issue which is upgrading TWRP 3.1.0 to the latest version 3.2.3 . I did everything correct but it just does not update to latest version. Once i installed the recovery image then rebooted , TWRP disappeared and stock recovery showed up. I also installed TRWP app (installed img and flash to recovery etc.. ) as well but nothing worked.
My question is does Galaxy s2 support latest TWRP or is there anything else that i should do ? Please if you can share any solution to solve this or any suggestion to update TWRP to latest version.
Thank you
Click to expand...
Click to collapse
Are you using iso-rec recovery?
There is a specific combination that is required to flash TWRP on your device.
I'm assuming that you have used the re-PIT created by @Lanchon, since you have LOS installed. The way the recovery is handled on your device is it is packaged into the kernel bundle, I believe, so it isn't flashed to the stock recovery partition, it is flashed in another location where the iso-rec recovery was originally flashed. When you tried to update your TWRP, you probably corrupted how that is structured and it reverted back to stock recovery instead of booting TWRP because, as far as I know, the stock recovery is still installed in its native recovery partition, even after flashing iso-rec recovery. Find an updated iso-rec version of TWRP for i9100
Sent from my LGL84VL using Tapatalk
TWRP issue for galaxy s2 i9100
Hi Droidriven
Thank you very much for responding my message , i'm using iso-rec recovery 3.1.0 right now and i followed these steps to install it ;
1 - I9100 _1.5GB system _6gb data _ 512MB PRE-LOAD by gangster .pit
2 - IP KERNEL 14-03-CWM - FOR + ODIN ( via odin )
and then
lanchon 20160406 I9100 + twrp 3.1.0 .
I did everything correct with istallation of twrp 3.1.0 and LOS
I'm wondering how can i upgrade twrp 3.1.0 to 3.2.3 ?
I thought galaxy s2 does not support latest version of twrp recovery . TWRP 3.1.0 is the only latest version that works for galaxy s2. Is that correct or is there any other way to update twrp to latest version on galaxy s2 ? Because i installed twrp app , did everything ( flashing img rebooting etc. ) it did not update to latest version. Please can you tell me if you know how to upgrade to latest version . i'll be appreciated . Thanks again for responding .
Have a nice day.
Thank you
galaxys2ci said:
Hi Droidriven
Thank you very much for responding my message , i'm using iso-rec recovery 3.1.0 right now and i followed these steps to install it ;
1 - I9100 _1.5GB system _6gb data _ 512MB PRE-LOAD by gangster .pit
2 - IP KERNEL 14-03-CWM - FOR + ODIN ( via odin )
and then
lanchon 20160406 I9100 + twrp 3.1.0 .
I did everything correct with istallation of twrp 3.1.0 and LOS
I'm wondering how can i upgrade twrp 3.1.0 to 3.2.3 ?
I thought galaxy s2 does not support latest version of twrp recovery . TWRP 3.1.0 is the only latest version that works for galaxy s2. Is that correct or is there any other way to update twrp to latest version on galaxy s2 ? Because i installed twrp app , did everything ( flashing img rebooting etc. ) it did not update to latest version. Please can you tell me if you know how to upgrade to latest version . i'll be appreciated . Thanks again for responding .
Have a nice day.
Thank you
Click to expand...
Click to collapse
I don't think you can use the standard version of TWRP that would be downloaded from the TWRP website or via the TWRP Manager app. It has to a TWRP that has been made to be compatible with iso-rec recovery/kernel.
If you still have the file that you used to install iso-rec TWRP 3.1.0, maybe you can extract that file, remove the 3.1.0 .img and replace it with the latest TWRP.img then rezip the file and try flashing that.
Sent from my LGL84VL using Tapatalk
Hi Droidriven
To be honest i've never thought about extracting file , removing the img and replacing with the latest one. That is a good idea actually . Maybe It could work . I'll try that.
Thank you so much for your quick replies. You have been great and helpful. I really appreciate that.
Thanks again
Have a nice day.