Database Info

[Q] No more Operating System on device

I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?

Sounds like you flashed the wrong recovery, possible that you installed the p3100 recovery.
Try reflashing the recovery.

miksol said:
I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?
Click to expand...
Click to collapse
Flashing KK ROMs on outdated recovery will get you a status 7 error. Grab the latest (I'd go with TWRP as CWM support will be ending soon) version from here...http://forum.xda-developers.com/showthread.php?t=2548257 update to the latest one you like (CWM is 6.0.5.0) Load up a ROM and give it a go. I put all my ROMs on an external card to be safe. Maybe do that and then just install from such.
p,s. CM installer never works, I dont think our tabs are compatible with it. At least I've never got it to work.But, you dont need it anyways.

[Completed] [q] two recovery sofware in my samsung gt-n7000

I had rooted my Samsung Galaxy Note GT-N7000 recently using Philz Touch5 CWM v6.0.3.2 and then I decided to put custom ROM OMNI nightly 4.4.4 -2014/09/09 to have android KITKAT 4.4.4 and I read on some threads that a minimum of CWM v6.0.4.4 and above is required to have KITKAT so I again had flashed or put Philz CWM v6.41.6 and then put OMNI ROM. Now KITKAT is working fine but then I try to backup KITKAT so that I can switch to Stock ROM and Custom Rom whenever I feel like but then while booting up the recovery software was changed by itself and then I show that I have two recovery Software- Clockworkmod and TeamWinRecovery. So problem is I had backed up the new custom Rom but that is done by TWRP whereas stock Rom was through CWM so a big problem is when I want to switch the two ROM. If both the ROMs were done by same recovery then must have been better but now I have to loose either of the two ROM's data then there is no meaning of backup :crying:
i also had installed ROM manager Please help... any advice would be very thankful. and sorry i wrote lengthy but i wanted to describe in precise way

dayal vandan said:
I had rooted my Samsung Galaxy Note GT-N7000 recently using Philz Touch5 CWM v6.0.3.2 and then I decided to put custom ROM OMNI nightly 4.4.4 -2014/09/09 to have android KITKAT 4.4.4 and I read on some threads that a minimum of CWM v6.0.4.4 and above is required to have KITKAT so I again had flashed or put Philz CWM v6.41.6 and then put OMNI ROM. Now KITKAT is working fine but then I try to backup KITKAT so that I can switch to Stock ROM and Custom Rom whenever I feel like but then while booting up the recovery software was changed by itself and then I show that I have two recovery Software- Clockworkmod and TeamWinRecovery. So problem is I had backed up the new custom Rom but that is done by TWRP whereas stock Rom was through CWM so a big problem is when I want to switch the two ROM. If both the ROMs were done by same recovery then must have been better but now I have to loose either of the two ROM's data then there is no meaning of backup :crying:
i also had installed ROM manager Please help... any advice would be very thankful. and sorry i wrote lengthy but i wanted to describe in precise way
Click to expand...
Click to collapse
I think it's not an issue.
If you want to go back to stock rom, flash cwm recovery and then restore the cwm nandroid backup.
If you want to restore the Kitkat rom, flash TWRP recovery and then restore the TWRP backup.
And in philz-touch cwm recovery you can set the default backup format to TWRP.
Check [PhilZ-cwm6][n7000] Stock Kernel+CWM6+Root+exFAT+NTFS-LTA thread for details.
If you have further questions, please ask in the [FAQ] [Q&A] [Noob Friendly] HELP THREAD - POST ALL YOUR SUPPORT QUESTIONS HERE thread.
My tapatalk signature:
Device: SGS5 (SM-G900F)
ROM: AllianceROM v5.1
Kernel: Stock G900FXXU1ANG7
Recovery: PhilZ-touch
Modem: G900FXU1ANG7
If you have any question about or any issue with your SGS2, just ask in the New members friendly Q&A thread.
... for the SGS5, just ask in the Noob friendly S5 All in one support thread
If you need general help/assistence, please go to XDA-Assist.

Restoring the old backup also didnt work
Sir if I first root the stockrom android 4.1.2 by CWM Base v6.0.3.2 which is Philz Touch 5 and then reinstall a higher version CWM v6.0.4.4 and above then do i need to reboot into recovery again or what all must I do like wiping etc?? literally it must be like upgrading CWM versions. I am just a beginner so have multiple doubts:angel: And Sir I made 2 backups of stockROM one by CWM and other by ROMmanager but the backup by CWM says error while restoring at final end and restoring backup of ROMmanager does restore but there is no Setting Menu and some menus after restoration. Main problem is without Setting Menu!
Sir I am thinking to reflash the stockROM through ODIN by PC so please guide me as to how can I use one Single Recovery Software either CWM or TWRP and then again backup both the stockROM and KITKAT customROM so that I can latter switch to either of the two ROM when I want.
Again sir thankyou for the previous help and I do want ur valuable guide here too

dayal vandan said:
Sir if I first root the stockrom android 4.1.2 by CWM Base v6.0.3.2 which is Philz Touch 5 and then reinstall a higher version CWM v6.0.4.4 and above then do i need to reboot into recovery again or what all must I do like wiping etc?? literally it must be like upgrading CWM versions. I am just a beginner so have multiple doubts:angel: And Sir I made 2 backups of stockROM one by CWM and other by ROMmanager but the backup by CWM says error while restoring at final end and restoring backup of ROMmanager does restore but there is no Setting Menu and some menus after restoration. Main problem is without Setting Menu!
Sir I am thinking to reflash the stockROM through ODIN by PC so please guide me as to how can I use one Single Recovery Software either CWM or TWRP and then again backup both the stockROM and KITKAT customROM so that I can latter switch to either of the two ROM when I want.
Again sir thankyou for the previous help and I do want ur valuable guide here too
Click to expand...
Click to collapse
I have already linked the FAQ thread for your device. Please read and ask there.
Maybe flashing back a stock firmware, rooting, backup and then flashing the Kitkat ROM again is a good idea.
Here is the Samsung Galaxy Note GT-N7000 > Galaxy Note GT-N7000 General > [STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.1.* thread which explains nearly everything you need.
Additionally, here is a detailed rooting guide: Samsung Galaxy Note GT-N7000 > Galaxy Note GT-N7000 General > [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM
I have found a useful guide to flash Kitkat to your device: Samsung Galaxy Note GT-N7000 > Galaxy Note GT-N7000 General > [Guide] A guide to KitKat
And concering Kitkat installation, you can ask directly in this thread.
And please ask further questions in the threads of your device specific forum ... there you will get quicker and proper help :fingers-crossed:

[Q] XT1039 Working Recovery // Back to StockROM

Hi frinds!
Yesterday I flashed CM12 on my XT1039.
- unlook bootloader
- testing some recoverys (CWM / CWM Touch / CWM philz / TWRP 2.7 + 2.8)
- made two backups (from CWM philz / TWRP 2.8)
- finaly flashed recovery (TWRP 2.8)
- clean install CM12
So far, so god..
CM12.. Very nice work so far!!! To me at the moment a little to buggy, so I want to go back to stock ROM.
Some questions:
1.) What recovery works most stable? I had some problems with all of them. I flashed TWRP, it stuck at bootlogo about two minutes?!?!
2.) I've tried to flash stockROM from here, I've tried different downloads.. Anytime: flashing failed! Any idea's, why flashing these zip not works?
3.) o.k., so I've restored my backup. Now I see in PlayStore an update for the Motorola Update Service, in discription is written: ..needed for the coming update to Android 5.0.. BUT!!!!!!! --> PlayStore says: not compatible with my device?!?!?!
What is wrong there?! Maybe flashing an "absolut clean" StockROM (Point 2) can help?
thanks for your help!

[Q] Can't Install Slimkat : Status Error 7

Hi Buddy!
Greetings from a new guy here
Just basic question, few days back I'm trying to Install Slimkat ROM, I've done few steps below :
- Wipe data factory reset
- Wipe chache
- Wipe dalvik
- Format system
- Flash zip from Internal SD Card
But I'm getting status error 7 on installation proccess
I'm trying to Install another ROM (CM 10.3 Official & CM 12 Unofficial) its working just fine
Why I couldn't install Slimkat on my device?

Because you are using an out dated recovery, you need at least cwm 6.0.4.4 because KitKat requires selinux support and older recovery doesn't support it, get it from general section of tab 2 and flash it using existing recovery
Hope it works

shsagnik said:
Because you are using an out dated recovery, you need at least cwm 6.0.4.4 because KitKat requires selinux support and older recovery doesn't support it, get it from general section of tab 2 and flash it using existing recovery
Hope it works
Click to expand...
Click to collapse
Thanks! Its working now
But just wondering, I previously using CWM 6.0.2.8 but I can even install CWM 12 which lolipop based
Why it doesnt work on slimkat which based on kitkat? Kitkat is even lower than lolipop

aliarroughi said:
Thanks! Its working now
But just wondering, I previously using CWM 6.0.2.8 but I can even install CWM 12 which lolipop based
Why it doesnt work on slimkat which based on kitkat? Kitkat is even lower than lolipop
Click to expand...
Click to collapse
If you read what I typed carefully, KitKat uses selinux, lollipop doesn't,
So you can use any recovery made for your device to flash a lollipop based ROM,
But anyways people are getting trim bug that causes infinite Boot loop without any reason, that's why our supper hero Andi protects us with patches that prevent those things.

Android version

I wanted to know if it is possible to change the version of android
By cyanogenmod or custom rom
If you could, could you give me a tip
How to do or tutorial something that helps?

First what is your device ? I think everybody have to start somewhere, so I have to know what is your device and see what is available for it.
But similar process for most of the cases ; root your device (try one click root like king root app or if it doesn't work try other methods for your device) then flash a custom recovery (TWRP) , into it you would be able to install (flash) custom Roms , and when it's done, just download the custom ROM , the Gapps according to the custom ROM Android version and your device architecture and then boot to recovery, make a Nandroid backup (backup everything in TWRP) then wipe system,data,cache,and delavik cache , flash the ROM, flash the Gapps and reboot.
But all the process (rooting, custom recovery etc) depends of your device

Is the galaxy lite 3 wanted to put the version
4.4.2 or +
Only that it does not exist nowhere, this custom or cyanogenmod
That's why I came here.
Way of having and making one or modifying it