(error 7 ) in cwm - Galaxy Tab 2 Q&A, Help & Troubleshooting

(error 7 ) in cwm - Galaxy Tab 2 Q&A, Help & Troubleshooting

I have a p3113 ,as evryone suggested i tried a lot of p3110 lolipop roms.
Recently i tried to flash cm11 unoffcial version of android andi.
It says it cant flash the rom and says error in the zip file and( error 7 ) in recovery.
All this happens only for a kitkat rom but i can flash any other version of android like lolipop or jb.
Pls help me ..currently im on cm9 official build for p3113. I have a cwm recovery,version 6

update your revovery, you can download zip here: https://www.androidfilehost.com/?w=files&flid=25706 Flash it and reboot recovery, then it should work fine

iks8 said:
update your revovery, you can download zip here: https://www.androidfilehost.com/?w=files&flid=25706 Flash it and reboot recovery, then it should work fine
Click to expand...
Click to collapse
Thanks got it..

switch to TWRP

I would alse recomend TWRP. In my opinion runs better than cwm

Related

[Q] No more Operating System on device

I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?

Sounds like you flashed the wrong recovery, possible that you installed the p3100 recovery.
Try reflashing the recovery.

miksol said:
I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?
Click to expand...
Click to collapse
Flashing KK ROMs on outdated recovery will get you a status 7 error. Grab the latest (I'd go with TWRP as CWM support will be ending soon) version from here...http://forum.xda-developers.com/showthread.php?t=2548257 update to the latest one you like (CWM is 6.0.5.0) Load up a ROM and give it a go. I put all my ROMs on an external card to be safe. Maybe do that and then just install from such.
p,s. CM installer never works, I dont think our tabs are compatible with it. At least I've never got it to work.But, you dont need it anyways.

[SC-04E] How to Flash Custom Rom on SC-04E

This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!AYJjzA6S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.

Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE

Reserved
Reserved

adagiov said:
Reserved
Click to expand...
Click to collapse
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!

Gargoyles said:
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!
Click to expand...
Click to collapse
You can download the Baiduyun Application to downlad the related files. Problem might occur because it is a Chinese skydrive. And I will upload to other skydrive if Baiduyun skydirve does not work.
Please advise specific skydrive if you know.

Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo

mvstark98 said:
Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo
Click to expand...
Click to collapse
try to enter in recovery and wipe cache and data.

Thank you so much for this post.
I have managed to update to Omega V40 on my sc-04e.
And I am able to use spmode, camera and wifi.

adagiov said:
Please Leave your problem or feedback below.
Click to expand...
Click to collapse
fix link,please,thank u

verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry, I have no idea what else link is available to both you and me.

verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry for the late reply, I tried to fix the link via Mega.

Hi,i would really appreciate it if you could just spare some few minutes of your time to help me out with my phone.
So I bought this barely used Samsung Galaxy S4 (i9505) from a guy. It came with android 4.2.2 and a boatloader/Baseband of SC04E0MUAMG2 and when I boot on it shows ntt-DoCoMo before booting up (so am guessing it was locked before, it came unlocked because every SIM I have tried has worked, and also it came rooted).
The issue is I really want to upgrade to Stock Lollipop or a custom lollipop rom like Aurora or Albe95 roms, but each time I try flashing a stock rom using Odin, it says fail (usually its when it gets to ' NAND write start, Auth fail '). Since Stock refused working I decided to try Flashing a custom rom using a custom recovery, it flashed successfully but when I tried flashing the modem and boatloader for the custom Rom, Odin would show fail again, I tried if on every port on my system and even unticked F.reset and auto-reset, but the result was still fail.
So I bought mobile odin pro to try out the stock again, it did install the stock but it was buggy, camera wasn't working, Mic wasn't working, the back button wasn't working. I just had to remove it. Currently am on Imperium 12.1 custom Rom( i installed it because it didn't require flashing modem and boatloader. The only problem is camera and Mic still won't work on this rom, but when I go back to the backed-up android 4.2.2 everything works fine. So yeah, that's my predicament. I am clueless as to what to do next so please help me out. I would really like to use a stock or custom Rom.

Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.

adagiov said:
Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE
Click to expand...
Click to collapse
hefp: kernel SC-04E for miui 4.4.2 ?????

DaveHert said:
Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.
Click to expand...
Click to collapse
If you want to use stock lollipop rom, you have to flash the lastest offical rom(SC04EOMUGOI4 ).
First, you flash the stock rom, you will find everything works well except back and menu button. If you have other problem(eg. wifi does not work), you may try flash the stock rom again.
Second, fix the back and menu button problem. You can find solution here.
Then, you can enjoy the stock lollipop rom.
If you want you try other custom rom based on lollipop rom. Please follow this post.
And you have mentioned, your odin did not work via PC, sometimes it is caused by usb cable. You can try with a replaced cable, buy one or two repalced usb calbe, and usually it will help you solve the problem.
If repalced usb cable can not work, you can try with other computers.

dunglt said:
hefp: kernel SC-04E for miui 4.4.2 ?????
Click to expand...
Click to collapse
Here is the Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg

adagiov said:
This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!4JQQkT4S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Click to expand...
Click to collapse
Help: I need kernel miui v7 for sc-04e

vitnamese fixed rom 4.4.2 is here password is 0915710079
http://4share.vn/f/7a494f484a4b434b/affiliate/2021884
problem is i cannot download this file, if some one can please let me know

HELP
hey brothers , can you help me to use xposed in my sc-04e docomo in 5.0.1 albe rom ?
and any one use docomo sc04e can use NFC ? tq. regards

[Q] Xperia L Lollipop

Hello Guys,
Need your help. Please help me out here.
My wife has a Sony xperia L which is still running Android 4.1.2 version. Now I rooted it with Root kit and tried flashing various Lollipop Roms like Cm12,primexperia and resurrection. But wifi does not work on all these Roms
I have tried almost every solution available on Xda.
I have used multiple custom recovery, N number of kernals and have flashed Boot.img and Thunderzap 4.16 from recovery after flashing the Roms. Still not luck.
Steps followed for flashing the Rom
1.Rooted with Rootkit and updated Supersu binary
2.Installed Busy box with Flashtool
3.Flashed a kernal (Tried TZ 4.14,4.7,4.8 Extended stock kernal and some more)
4. Booted to recovery ( Tried Cwm, TWRP, Philz)
5. Wipe data and all for clean installation
6. Flashed Rom zip (Cm12, Omni 4.4, Primexperia, Resurrection)
7. Flashed Gapps (As per the Rom)
8. Flashed Supersu zip to regain root access
9. Reboot to boot into new Rom
10. Wifi is not working so flashed boot.img from Rom via flashtool
11. Flash TZ 4.16 in recovery for cm12 ROMS.
Still wifi not working not sure what is the issue. It's working fine in Stock Rom.
Now I am upgrading to 4.2.2 via Sony update software.
Masters please help me out here. I can think of 2 solutions now.
1. First update to latest Sony official update (4.2.2) and then try again.
2. If there is any firmware file for stable lollipop version (with system.img, data.img and boot.img) which can be flashed using flashtool.

ramkumar2000 said:
Hello Guys,
Need your help. Please help me out here.
My wife has a Sony xperia L which is still running Android 4.1.2 version. Now I rooted it with Root kit and tried flashing various Lollipop Roms like Cm12,primexperia and resurrection. But wifi does not work on all these Roms
I have tried almost every solution available on Xda.
I have used multiple custom recovery, N number of kernals and have flashed Boot.img and Thunderzap 4.16 from recovery after flashing the Roms. Still not luck.
Steps followed for flashing the Rom
1.Rooted with Rootkit and updated Supersu binary
2.Installed Busy box with Flashtool
3.Flashed a kernal (Tried TZ 4.14,4.7,4.8 Extended stock kernal and some more)
4. Booted to recovery ( Tried Cwm, TWRP, Philz)
5. Wipe data and all for clean installation
6. Flashed Rom zip (Cm12, Omni 4.4, Primexperia, Resurrection)
7. Flashed Gapps (As per the Rom)
8. Flashed Supersu zip to regain root access
9. Reboot to boot into new Rom
10. Wifi is not working so flashed boot.img from Rom via flashtool
11. Flash TZ 4.16 in recovery for cm12 ROMS.
Still wifi not working not sure what is the issue. It's working fine in Stock Rom.
Now I am upgrading to 4.2.2 via Sony update software.
Masters please help me out here. I can think of 2 solutions now.
1. First update to latest Sony official update (4.2.2) and then try again.
2. If there is any firmware file for stable lollipop version (with system.img, data.img and boot.img) which can be flashed using flashtool.
Click to expand...
Click to collapse
number 1. is correct the 4.1.2 software uses a really old modem that isnt compatible with LP based roms... The LATEST stockrom (...1.17 4.2.2) has the correct modem to make the wifi work
Sent from my Xperia T using XDA Free mobile app

Tried TWPR, CWM = always get "error 7" when trying to install ROMS.

I had some issues with ROMs, so managed to revert back to stock. Now using TWRP, but only after trying with CWM, all ROMS get error 7, "can't install this package on top of incompatible data", and CWM said something about it being the wrong firmware for a "note4" or something.
I don't know what to do, can you flash roms through ODIN? Please note this is an N8010
Thanks for your help

NOTE 4 suggests you are flashing a wrong file for another model .
TWRP CWM and Philz Recovery and High On Android recovery work on N8010 tested all within the last month .
can you flash roms through ODIN? >> Custom roms no only stock tar files .

I've tried the CM 11, the CM 12 and Android revolution ROM, all supposedly work with the N8010. Revolution Rom was the first, installed but made a boot loop after I applied the N8010 compatibility flash. After that the file structure seemed to double - there was a new folder with all the other android directory inside it. I deleted the doubleup, but now I don't know what to do, it's back on stock.
JJEgan said:
NOTE 4 suggests you are flashing a wrong file for another model .
TWRP CWM and Philz Recovery and High On Android recovery work on N8010 tested all within the last month .
can you flash roms through ODIN? >> Custom roms no only stock tar files .
Click to expand...
Click to collapse

upgrade TWRP latest version(3.2.x) for galaxy s2 i9100

Hello Everyone
I have installed TWRP 3.1.0 on my galaxy s2 and also Lineage 14.1 . So far so good . It wasn't that hard to install custom rom and recovery but i got an issue which is upgrading TWRP 3.1.0 to the latest version 3.2.3 . I did everything correct but it just does not update to latest version. Once i installed the recovery image then rebooted , TWRP disappeared and stock recovery showed up. I also installed TRWP app (installed img and flash to recovery etc.. ) as well but nothing worked.
My question is does Galaxy s2 support latest TWRP or is there anything else that i should do ? Please if you can share any solution to solve this or any suggestion to update TWRP to latest version.
Thank you

galaxys2ci said:
Hello Everyone
I have installed TWRP 3.1.0 on my galaxy s2 and also Lineage 14.1 . So far so good . It wasn't that hard to install custom rom and recovery but i got an issue which is upgrading TWRP 3.1.0 to the latest version 3.2.3 . I did everything correct but it just does not update to latest version. Once i installed the recovery image then rebooted , TWRP disappeared and stock recovery showed up. I also installed TRWP app (installed img and flash to recovery etc.. ) as well but nothing worked.
My question is does Galaxy s2 support latest TWRP or is there anything else that i should do ? Please if you can share any solution to solve this or any suggestion to update TWRP to latest version.
Thank you
Click to expand...
Click to collapse
Are you using iso-rec recovery?
There is a specific combination that is required to flash TWRP on your device.
I'm assuming that you have used the re-PIT created by @Lanchon, since you have LOS installed. The way the recovery is handled on your device is it is packaged into the kernel bundle, I believe, so it isn't flashed to the stock recovery partition, it is flashed in another location where the iso-rec recovery was originally flashed. When you tried to update your TWRP, you probably corrupted how that is structured and it reverted back to stock recovery instead of booting TWRP because, as far as I know, the stock recovery is still installed in its native recovery partition, even after flashing iso-rec recovery. Find an updated iso-rec version of TWRP for i9100
Sent from my LGL84VL using Tapatalk

TWRP issue for galaxy s2 i9100
Hi Droidriven
Thank you very much for responding my message , i'm using iso-rec recovery 3.1.0 right now and i followed these steps to install it ;
1 - I9100 _1.5GB system _6gb data _ 512MB PRE-LOAD by gangster .pit
2 - IP KERNEL 14-03-CWM - FOR + ODIN ( via odin )
and then
lanchon 20160406 I9100 + twrp 3.1.0 .
I did everything correct with istallation of twrp 3.1.0 and LOS
I'm wondering how can i upgrade twrp 3.1.0 to 3.2.3 ?
I thought galaxy s2 does not support latest version of twrp recovery . TWRP 3.1.0 is the only latest version that works for galaxy s2. Is that correct or is there any other way to update twrp to latest version on galaxy s2 ? Because i installed twrp app , did everything ( flashing img rebooting etc. ) it did not update to latest version. Please can you tell me if you know how to upgrade to latest version . i'll be appreciated . Thanks again for responding .
Have a nice day.
Thank you

galaxys2ci said:
Hi Droidriven
Thank you very much for responding my message , i'm using iso-rec recovery 3.1.0 right now and i followed these steps to install it ;
1 - I9100 _1.5GB system _6gb data _ 512MB PRE-LOAD by gangster .pit
2 - IP KERNEL 14-03-CWM - FOR + ODIN ( via odin )
and then
lanchon 20160406 I9100 + twrp 3.1.0 .
I did everything correct with istallation of twrp 3.1.0 and LOS
I'm wondering how can i upgrade twrp 3.1.0 to 3.2.3 ?
I thought galaxy s2 does not support latest version of twrp recovery . TWRP 3.1.0 is the only latest version that works for galaxy s2. Is that correct or is there any other way to update twrp to latest version on galaxy s2 ? Because i installed twrp app , did everything ( flashing img rebooting etc. ) it did not update to latest version. Please can you tell me if you know how to upgrade to latest version . i'll be appreciated . Thanks again for responding .
Have a nice day.
Thank you
Click to expand...
Click to collapse
I don't think you can use the standard version of TWRP that would be downloaded from the TWRP website or via the TWRP Manager app. It has to a TWRP that has been made to be compatible with iso-rec recovery/kernel.
If you still have the file that you used to install iso-rec TWRP 3.1.0, maybe you can extract that file, remove the 3.1.0 .img and replace it with the latest TWRP.img then rezip the file and try flashing that.
Sent from my LGL84VL using Tapatalk

Hi Droidriven
To be honest i've never thought about extracting file , removing the img and replacing with the latest one. That is a good idea actually . Maybe It could work . I'll try that.
Thank you so much for your quick replies. You have been great and helpful. I really appreciate that.
Thanks again
Have a nice day.

Database Info

welcome