Database Info

[Q&A] [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0

Q&A for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

like this rom
i like this rom only had a few problems but after a reboot seams to be working good again

I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app

I had that problem when I was using certain builds. I had to drop modem back to BMB1. After that I could send with no issue. I, too could only send one text at a time.
msolaw said:
I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse

Where can I turn off the swipe security on the 8.12 update?

markapowell said:
Where can I turn off the swipe security on the 8.12 update?
Click to expand...
Click to collapse
Lockscreen tweaks are in Settings/Interface/Lockscreen
Sent from my SCH-I535 using Tapatalk

What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already

myredfast said:
What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already
Click to expand...
Click to collapse
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thank you much[emoji2]

I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....

myredfast said:
I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....
Click to expand...
Click to collapse
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!

myredfast said:
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!
Click to expand...
Click to collapse
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Hey no problem, it's all good.. I guess we all have "moments" lol. After looking back on it I was like "Damn I should have known that" haha... I just really appreciate all you and other devs do for the community [emoji106] ?!!! Phone is running champ doe!!! Thanks again! And thanks for clearing that up[emoji2]

GPS issue with latest nightly
Just an FYI, I tried the latest nightly and got zero GPS fix, even with a clean flash. I went back to the latest stable build (also a clean flash) and everything's cool with that, except for my inability to view pics within Gmail. :/

Portable Wi-Fi Hotspot
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.

ooom416354 said:
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.
Click to expand...
Click to collapse
Nope. Lot of us have used it for months with no issue whatsoever.
Sent from my SCH-I535 using Tapatalk

Google Play Services not Installed
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?

wundbread said:
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?
Click to expand...
Click to collapse
You could try clearing data for the Play Store. I always encourage a clean flash (wipe data and system) before each new release.
Sent from my SCH-I535 using Tapatalk

Any updates on that "further notice"?
Sent from my SM-T900 using XDA Free mobile app

[Q&A] [ROM][4.4.4] MIUI v5 4.8.22

Q&A for [ROM][4.4.4] MIUI v5 4.8.22
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] MIUI v5 4.8.22. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

texts?
I can receive texts, make calls, take them everything but sending texts works for me, can someone help me? Is there something I missed?

coryj8915 said:
I can receive texts, make calls, take them everything but sending texts works for me, can someone help me? Is there something I missed?
Click to expand...
Click to collapse
Just a suggestion but put your post in the initial thread, I know it's an attempt at keeping the threads clean but this Q&A thing has gotten a little out of hand
From my CM11 S3

Well, tried, then it said you must have posts etc and automatically
directed me here, otherwise I totally would have, just love miui and want texting abilities
ShapesBlue said:
Just a suggestion but put your post in the initial thread, I know it's an attempt at keeping the threads clean but this Q&A thing has gotten a little out of hand
From my CM11 S3
Click to expand...
Click to collapse

coryj8915 said:
Well, tried, then it said you must have posts etc and automatically
directed me here, otherwise I totally would have, just love miui and want texting abilities
Click to expand...
Click to collapse
I hear ya. I'd post there anyways. That's just me though. And yea MIUI is pretty sweet
@coryj8915 it's merely because you don't have 10 or more Posts
From my CM11 S3

So of i dont have anything else to post on? I mean I guess I understand why it maybe that way, but I've no need to make 7 more Posts and just would like to get a fix or a direction and have other people with the same problem potentially find a problem as well.
ShapesBlue said:
I hear ya. I'd post there anyways. That's just me though. And yea MIUI is pretty sweet
@coryj8915 it's merely because you don't have 10 or more Posts
From my CM11 S3
Click to expand...
Click to collapse

coryj8915 said:
So of i dont have anything else to post on? I mean I guess I understand why it maybe that way, but I've no need to make 7 more Posts and just would like to get a fix or a direction and have other people with the same problem potentially find a problem as well.
Click to expand...
Click to collapse
I'll copy your post and put it in the actual thread
From my CM11 S3

Hey I love this rom!, But i'm experiencing the camera being in an oval shape in 3rd party apps (kik,snapchat,etc) Could you patch this? Or is it un patchable?
Sent from my SPH-L710 using XDA Free mobile app

Haptic level
Hi, I just upgraded to the 4.4 SCH i535 miui rom and can't find the option to decrease vibration strength for haptic. It used to be in the settings under advanced, but it's not there anymore, only the option to turn it on or off via sound menu. Is there another way to do this, or a WSM module? I've looked everywhere and can't find anything on this particular rom. Thanks!

Has anyone had issues with the alarm app force closing when trying to change alarm frequency in the latest update?

Wanted to try something else for a change on my S III and I am getting insufficient storage when installing certain root apps. Anyone know a fix for this?

Spark91 said:
Wanted to try something else for a change on my S III and I am getting insufficient storage when installing certain root apps. Anyone know a fix for this?
Click to expand...
Click to collapse
Do you have any excess backups on your phone? I've used miui without any storage issues
My S3 running BlissStalk

Installed rom / Pico PA gapps / SuperSU and when I wanted to redownload apps from Google ( not restoring data ) just says insufficient space
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
And my internal still has 14 gigs open so super fresh install ( I did a full clean wipe. )

Spark91 said:
Installed rom / Pico PA gapps / SuperSU and when I wanted to redownload apps from Google ( not restoring data ) just says insufficient space
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
And my internal still has 14 gigs open so super fresh install ( I did a full clean wipe. )
Click to expand...
Click to collapse
Seems like this is a known issue with the S3, did some digging and found a lot of information on xda as well as around the web. Unsure what the best bet is
My S3 running BlissStalk

Device Control in play store or KTweaker app either one will do the job
normandcass said:
Hi, I just upgraded to the 4.4 SCH i535 miui rom and can't find the option to decrease vibration strength for haptic. It used to be in the settings under advanced, but it's not there anymore, only the option to turn it on or off via sound menu. Is there another way to do this, or a WSM module? I've looked everywhere and can't find anything on this particular rom. Thanks!
Click to expand...
Click to collapse
Not sure if this works in MIUI as I haven't ran this in a couple weeks. It was a nice rom though, I always did like MIUI especially the specialty MIUI built in apps..
Anyway, Device Control I'm 90 percent certain lets you adjust haptic feedback. I usually set mine to around 10 percent. The test button never works for me but when you hit okay, you can feel the difference.. There's a ton of other cool settings in there too. And it's free.
Also, if you use the KToonz Kernel, the KTweaker app also has the option somewhere in there to adjust the haptic feedback.
Hope this helps I know I may be late to the table, but maybe someone can make use of this information.
griz

Corrupt KT747 Kernel
Greetings all. I was directed to this thread by the developer. So heres my issue:
I'm on SGS3 vzw. I installed MIUI 4.8.22 using TWRP (newest version). I cleared delvik, cache, factory reset thrice, flashed MIUI, then flashed gapps, then I flashed the cdma fix (I assumed that I needed it). I am unable to start a Xiomi cloud account and when I tried to flash the KT aosp 4.4.4 kernel, I got a "file corrupted" message. Is there an updated KT747 somewhere, or am I trying to install the wrong kernel or what? I would appreciate any help on the matter....BTW.....I really like the look of MIUI. I may keep it!

What Baseband to use?
I have a verizon SCH-I535 currently using VRUCML1 Baseband, running Android 4.4.4 and the phone is unlocked. Is there a newer baseband for this phone or should I continue using the currrent baseband? I haven't really found any topics that answer my question.
Thank You

eyeamred said:
I have a verizon SCH-I535 currently using VRUCML1 Baseband, running Android 4.4.4 and the phone is unlocked. Is there a newer baseband for this phone or should I continue using the currrent baseband? I haven't really found any topics that answer my question.
Thank You
Click to expand...
Click to collapse
Baseband/radio/modem are all the same thing pretty much. You can update the modem to NE1 without any issues. I also have a unlocked S3
Sent from my Nexus 5

bug report
i am in china,so i cant receive any callin ,but i can call others ,this is special for me?

oh my god
you update this,i wish you fix some bugs ,cause i love this rom,and i wish you can keep on..!!!!!

[Q&A] Gnabo ROM X Tab S feature

Q&A for Gnabo ROM X Tab S feature
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Gnabo ROM X Tab S feature. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

I'm running a old version of Hyperdrive v6 on a N8013 Android 4.1.2. According to rootchecker, my bootloader is N8013UEUCMC2 and Kernel version is 3.0.31-813049.
I was looking at Gnabo's thread and I'm wondering if I need to flash any of these, Kernel for N801X, WiFi Fix for N801X and Remove phone stuff for N801x, or are those already included in your ROM?
Thanks

dax711 said:
I'm running a old version of Hyperdrive v6 on a N8013 Android 4.1.2. According to rootchecker, my bootloader is N8013UEUCMC2 and Kernel version is 3.0.31-813049.
I was looking at Gnabo's thread and I'm wondering if I need to flash any of these, Kernel for N801X, WiFi Fix for N801X and Remove phone stuff for N801x, or are those already included in your ROM?
Thanks
Click to expand...
Click to collapse
all are include in the rom

AhmedSafian said:
all are include in the rom
Click to expand...
Click to collapse
Thanks!! Can;t wait to finally get off 4.1.2

dax711 said:
Thanks!! Can;t wait to finally get off 4.1.2
Click to expand...
Click to collapse
Just to let you know I had to install the wifi fix after installing your rom. I haven't had time to play with it too much but so far it seems to run very smoothly

dax711 said:
Just to let you know I had to install the wifi fix after installing your rom. I haven't had time to play with it too much but so far it seems to run very smoothly
Click to expand...
Click to collapse
I was wondering, you know that page with 6 sections that shows news and side sync. How do I open the news stories? I figured out that you can flip up and down to scroll through different stories but can't figure out how to open the story.
Also, this isn't related to your rom but I've been out of the loop for awhile, can you tell me what is the best current solution for installing flash for websites.
Thanks again, I've been using it a lot for the last few hours after I got wifi working and I'm really loving it!

hi
What recovery you use?
I tried to philz recovery and the TWRP, but the installation takes only a few seconds and nothing in this device.
Sorry for my english...

Long time gnabo fan here, eagerly waiting for V5.

santosrps123 said:
hi
What recovery you use?
I tried to philz recovery and the TWRP, but the installation takes only a few seconds and nothing in this device.
Sorry for my english...
Click to expand...
Click to collapse
I used CWM

dax711 said:
I used CWM
Click to expand...
Click to collapse
What version of CWM did you use ?

electrikjesus said:
What version of CWM did you use ?
Click to expand...
Click to collapse
6.0.1.1

dax711 said:
I was wondering, you know that page with 6 sections that shows news and side sync. How do I open the news stories? I figured out that you can flip up and down to scroll through different stories but can't figure out how to open the story.
Also, this isn't related to your rom but I've been out of the loop for awhile, can you tell me what is the best current solution for installing flash for websites.
Thanks again, I've been using it a lot for the last few hours after I got wifi working and I'm really loving it!
Click to expand...
Click to collapse
you just can click on the story if you were installed flipboard
and for flash you can also google it and installed like any apk

AhmedSafian said:
you just can click on the story if you were installed flipboard
and for flash you can also google it and installed like any apk
Click to expand...
Click to collapse
Thanks, everything still running smoothly.

Lost Root
Can anyone point me to the proper files and procedure to get this Rom Rooted?
I came from Gnabo8 Rooted and TWRP.
I need to get the Root back.
Thanks,

I think, he testing our patience

ronimus said:
Can anyone point me to the proper files and procedure to get this Rom Rooted?
I came from Gnabo8 Rooted and TWRP.
I need to get the Root back.
Thanks,
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1831152
Just follow method 2 and you should get root.

No working 3G?
Hi, it is possible to enable N8000 data network with Gnabo rom X tab S?
I'm really enjoying it, thank you!
sorry my poor english,

Tab S Sensation ROm Will Not Install
When I try to install this ROM, I get the following error, am using PhilZ Touch 6 recovery CWM 6.0.4.7.
The error is;
format () expects 5 args, got 4
E:Error in /data/media/0/download_rom/TAB.S.Sensation.V6.n801x.zip
(status 7)
Installation aborted.
I did a Wipe Data/Factory Reset. My internal storage has about 1/6 G free, and the SDCARD has about 2 G free.
What could be wrong, I have downloaded the ROM twice now.
Any suggestion appreciated.
Thanks

what is your device?
try you first apply Gnabo rom? :good:

@AhmedSafian thank you for your hard work. This ROM is definitely the one that made my tab look new. Just wanted to report few things.
(N8013)
1) xposed is not pre-installed? If ever I'll do it manually, which version would you recommend.
2) I installed a HULU app since I do have an account with them, (it's like Netflix) it doesn't run. Any suggestions on what to do with it?
3) Is Sound Alive better than (Dolby Digital)?
Sent from my SM-G9250 using Tapatalk

LG G3 Keyboard for CM/AOSP ROMs

Hi everyone,
I've been using non-stock ROMs for quite a while and I was always flashing LG keyboards, cause I find them really handy to use.
I had asked in the Official CM13's thread, if anyone had known a compatible LG keyboard, but no one had answered.
After some search, I found this thread, and after flashing the keyboard I found out that it works flawlessly with CM13 (latest nightly) for my G2, too. Of course I take no responsibility for any kind of problem that might occur during/after flashing the .zip, as I said it works just fine with my G2.
All credits should be given to @siankatabg who made the .zip, all I did was just search G3's forum and test if it works.
Hope this helped anyone looking to flash a LG keyboard to his/her CM13 based ROM. If the thread is against the rules, I'd like to apologize in advance, and mods, feel free to delete it.

It works on g2 too, that's nice, but should work on other cm/aosp roms.
Can you please change the title when someone report that the Keyboard works on other roms than cm13, so I don't need to make a new thread here
Sent from my LG-D855 using Tapatalk

Done. Thank you for your work!

Didn't work on cm13 temasek rom for s3(i9300)
siankatabg said:
It works on g2 too, that's nice, but should work on other cm/aosp roms.
Can you please change the title when someone report that the Keyboard works on other roms than cm13, so I don't need to make a new thread here
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse

It works with miui8 rom for d802?

panos_ts said:
Hi everyone,
I've been using non-stock ROMs for quite a while and I was always flashing LG keyboards, cause I find them really handy to use.
I had asked in the Official CM13's thread, if anyone had known a compatible LG keyboard, but no one had answered.
After some search, I found this thread, and after flashing the keyboard I found out that it works flawlessly with CM13 (latest nightly) for my G2, too. Of course I take no responsibility for any kind of problem that might occur during/after flashing the .zip, as I said it works just fine with my G2.
All credits should be given to @siankatabg who made the .zip, all I did was just search G3's forum and test if it works.
Hope this helped anyone looking to flash a LG keyboard to his/her CM13 based ROM. If the thread is against the rules, I'd like to apologize in advance, and mods, feel free to delete it.
Click to expand...
Click to collapse
Hi any idea if this works with RR nougat build on LG G2 D802???

Cyberman5145 said:
Hi any idea if this works with RR nougat build on LG G2 D802???
Click to expand...
Click to collapse
well... why don't you check it your self and than report to all off us instead of just asking about it?

sakej said:
well... why don't you check it your self and than report to all off us instead of just asking about it?
Click to expand...
Click to collapse
Well said however get twrp to work for me was a hell of a job and fear if would end up bricking my device. Just trying to be careful on this.
Better to learn from mistakes of others than to make one yourself.
I am not a developer and not sure of how to set my device back to normal may god forbid if I end up messing it up.
Hope this clarifies my question above

Cyberman5145 said:
Well said however get twrp to work for me was a hell of a job and fear if would end up bricking my device. Just trying to be careful on this.
Better to learn from mistakes of others than to make one yourself.
I am not a developer and not sure of how to set my device back to normal may god forbid if I end up messing it up.
Hope this clarifies my question above
Click to expand...
Click to collapse
well... If you already have TWRP installed, do a nandroid backup and if anything goes wrong just recover form it, there is no way that just flashing this will brick your phone beyond recovery point, and even if in some way recovery got corrupted there's always a way, you can just run download mode and flash KDZ with stock rom using flash tool 2014. Anyway I went ahead and tried it myself on Lineage 14.1 ( Android 7.1.1.) and it doesn't work, I mean i did flash it and it seems that everything went well but after reboot it just wasn't there. You better off with Google Keyboard (you can get it at google play store)
BTW. The easiest way to get TWRP on LG G2 is just flash stock lollipop root it, and than flash "Autorec for lollipop", when it's done just go to recovery and flash newest TWRP available and you're golden.

Flashed the file in language and inputs in settings lg keyboard shows up but I enable it reboot still have aosp keyboard tried disabling aosp keyboard and lg gets automativmcally blacked out with it any help appreciated!!!
---------- Post added at 09:48 PM ---------- Previous post was at 09:43 PM ----------
Got it nevermond even though it blacks out its still enabled awesome

Share H901 custom stock rom. Updated Tizen 6.0

Here are two stock custom rooted roms by Vietnamese team. Just sharing the links.
REMEMBER back up your recent rom first by twrp
I use google chrome to translate the page to English
Tizen V.6.0 H90120L
http://lgviet.com/forum/threads/tỔng-hỢp-tizen-rom-cook-mm-6-0-h901-updated-v6-0-h90120l.61474/
RadeonMaya V.4.0 H960A20M
http://lgviet.com/forum/threads/rom-radeonmaya-t-mobile-h901-v4-0-update-19-11-2016.58894/

Is this ROM from a trustworthy source?
Sent from my LG-H901 using XDA-Developers mobile app

iphone5sf said:
Here is one stock custom rooted rom H90120L by Vietnamese Tizen team.
Back up your recent rom first by twrp
I use google chrome to translate the page to English
I have installed it and it runs perfect and smoothly.
http://lgviet.com/forum/threads/ton...6-0-t-mobile-h901-updated-v3-0-nen-20l.61474/
Click to expand...
Click to collapse
How is it going? I actually like the G5 port. Please confirm everything is going well cos I would love to use it. Please tell me how you see the ROM.
My only fear is that I noticed that if one is to revert to stock there are other files to be flashed. Being the language is in Vietnamese if a mistake is made, then hardbrick will ensue.
Thanks

zayidhs said:
How is it going? I actually like the G5 port. Please confirm everything is going well cos I would love to use it. Please tell me how you see the ROM.
My only fear is that I noticed that if one is to revert to stock there are other files to be flashed. Being the language is in Vietnamese if a mistake is made, then hardbrick will ensue.
Thanks
Click to expand...
Click to collapse
You can use Google Chrome to open the page and use translate the page to English, the rom installation is English. I have installed and run good and smoothly. You need to back up rom and then full wipe, and install rom. There is instruction on V3.0 section. I just use as normal use so I am not sure how is perfect or not. Any other user has idea?

iphone5sf said:
You can use Google Chrome to open the page and use translate the page to English, the rom installation is English. I have installed and run good and smoothly. You need to back up rom and then full wipe, and install rom. There is instruction on V3.0 section. I just use as normal use so I am not sure how is perfect or not. Any other user has idea?
Click to expand...
Click to collapse
I've downloaded the ROM, will flash later when I get back from work. Will let you know how it goes....

This rom is super cool. Im running a different one that's in the same section, it seems to have the UI more accurate like the V20. The devs there seem to be hella active. Ive seen updates every few days for both roms. Runs smooth and battery life is much better than stock in my opinion, cant tell if its a placebo though so Id recommend you test yourself.

iphone5sf said:
Here is one stock custom rooted rom H90120L by Vietnamese Tizen team.
Back up your recent rom first by twrp
I use google chrome to translate the page to English
I have installed it and it runs perfect and smoothly.
http://lgviet.com/forum/threads/ton...6-0-t-mobile-h901-updated-v3-0-nen-20l.61474/
Click to expand...
Click to collapse
Q: Can you roll back to 20J after trying 20L, or will it brick?

martinsavvy said:
This rom is super cool. Im running a different one that's in the same section, it seems to have the UI more accurate like the V20. The devs there seem to be hella active. Ive seen updates every few days for both roms. Runs smooth and battery life is much better than stock in my opinion, cant tell if its a placebo though so Id recommend you test yourself.
Click to expand...
Click to collapse
There does seem to be a lot going on there! But there's only one 20l ROM thus far, right?
Sent from my LG-H901 using XDA-Developers mobile app

I dirty flashed the 20l ROM over stock rooted 20l, it booted up fine and seems fine so far.
Sent from my LG-H901 using XDA-Developers mobile app

HelloG3_MotoNoMore said:
Q: Can you roll back to 20J after trying 20L, or will it brick?
Click to expand...
Click to collapse
I saw a post in the Dev section that stated both 20J & 20L are both set to Anti-Rollback version 2. As long as you stay within the same anti-rollback version then you should be able to move back and forth between 20J & 20L. I believe 20E is Anti-Rollback version 1.
I am about to move back to 20J and will let you know how it goes.
EDIT: I was able to go back to 20J with no problem
Do we need to modify any of the APN's or build.prop for use on Verizon in US? My phone says 4G but keeps dropping to 3G and then sometimes it says H...

martinsavvy said:
This rom is super cool. Im running a different one that's in the same section, it seems to have the UI more accurate like the V20. The devs there seem to be hella active. Ive seen updates every few days for both roms. Runs smooth and battery life is much better than stock in my opinion, cant tell if its a placebo though so Id recommend you test yourself.
Click to expand...
Click to collapse
Yeah, they are active but it is expected since they have a lot of sales in the Asian market. Can you please get me the link to the V20-like ROM?
Ty

Can someone say whether this ROM has init.d support? You can tell because there will be a folder called init.d at /system/etc/init.d. It may or may not be empty. If there is something in there then it's a pretty good indication. I usually drop a file in there that will run on boot and produce a log file in /data. If that log file doesn't appear, then no init.d support is present.

AnonVendetta said:
Can someone say whether this ROM has init.d support? You can tell because there will be a folder called init.d at /system/etc/init.d. It may or may not be empty. If there is something in there then it's a pretty good indication. I usually drop a file in there that will run on boot and produce a log file in /data. If that log file doesn't appear, then no init.d support is present.
Click to expand...
Click to collapse
Can't find it using root browser, though it maybe me. Let's wait for another person to confirm.

I'll go ahead and assume the answer is no unless someone confirms otherwise. If I knew how to mod kernels, ramdisks, etc then I would add it myself. There is a universal init.d app that can add artificial support for this in the meantime, so not a huge deal. But kernel/ROM support for it is superior.

zayidhs said:
Yeah, they are active but it is expected since they have a lot of sales in the Asian market. Can you please get me the link to the V20-like ROM?
Ty
Click to expand...
Click to collapse
I believe this is the ROM you are looking for: RadeonMaya
I've had it installed for about 2 hours now and all is well.

V. 4.0 Back up first. My idea for easier update, wipe Dalvik / System / Cache and then install the 4.0
For Clean install, wipe Dalvik / System / Data / Cache then install

Sippi4x4man said:
I believe this is the ROM you are looking for: RadeonMaya
I've had it installed for about 2 hours now and all is well.
Click to expand...
Click to collapse
How did you extract this? The apps I used on the phone say a password is required. And it's a TWRP backup to be restored?
Edit: got it from the thread there! Duh
Sent from my LG-H901 using XDA-Developers mobile app

YrrchSebor said:
How did you extract this? The apps I used on the phone say a password is required. And it's a TWRP backup to be restored?
Edit: got it from the thread there! Duh
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
Glad you got it worked out, it took me a minute to figure out the password also lol. So far I've noticed my data speeds are slow and I only see 4G and not 4G LTE at the top so far....

Sippi4x4man said:
Glad you got it worked out, it took me a minute to figure out the password also lol. So far I've noticed my data speeds are slow and I only see 4G and not 4G LTE at the top so far....
Click to expand...
Click to collapse
Ah ok lol haha, cool. All my andoid apps on the phone are failing to extract it, even with the password.
But as for the LTE, I think you may need to edit the build.prop if it isn't set up to be a Tmobile device. Or someone posted a tmo build.prop file in the thread about getting the 20l OTA, I believe
Sent from my LG-H901 using XDA-Developers mobile app

YrrchSebor said:
Ah ok lol haha, cool. All my andoid apps on the phone are failing to extract it, even with the password.
But as for the LTE, I think you may need to edit the build.prop if it isn't set up to be a Tmobile device. Or someone posted a tmo build.prop file in the thread about getting the 20l OTA, I believe
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
If you replace the build.prop in this rom with a stock one it will get stuck at LG and won't boot any further...at least in my experience. I'm sure it's something easy but who knows