[Q&A] [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0 - Verizon Samsung Galaxy S III

Q&A for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

like this rom
i like this rom only had a few problems but after a reboot seams to be working good again

I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app

I had that problem when I was using certain builds. I had to drop modem back to BMB1. After that I could send with no issue. I, too could only send one text at a time.
msolaw said:
I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse

Where can I turn off the swipe security on the 8.12 update?

markapowell said:
Where can I turn off the swipe security on the 8.12 update?
Click to expand...
Click to collapse
Lockscreen tweaks are in Settings/Interface/Lockscreen
Sent from my SCH-I535 using Tapatalk

What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already

myredfast said:
What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already
Click to expand...
Click to collapse
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thank you much[emoji2]

I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....

myredfast said:
I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....
Click to expand...
Click to collapse
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!

myredfast said:
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!
Click to expand...
Click to collapse
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Hey no problem, it's all good.. I guess we all have "moments" lol. After looking back on it I was like "Damn I should have known that" haha... I just really appreciate all you and other devs do for the community [emoji106] ?!!! Phone is running champ doe!!! Thanks again! And thanks for clearing that up[emoji2]

GPS issue with latest nightly
Just an FYI, I tried the latest nightly and got zero GPS fix, even with a clean flash. I went back to the latest stable build (also a clean flash) and everything's cool with that, except for my inability to view pics within Gmail. :/

Portable Wi-Fi Hotspot
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.

ooom416354 said:
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.
Click to expand...
Click to collapse
Nope. Lot of us have used it for months with no issue whatsoever.
Sent from my SCH-I535 using Tapatalk

Google Play Services not Installed
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?

wundbread said:
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?
Click to expand...
Click to collapse
You could try clearing data for the Play Store. I always encourage a clean flash (wipe data and system) before each new release.
Sent from my SCH-I535 using Tapatalk

Any updates on that "further notice"?
Sent from my SM-T900 using XDA Free mobile app

Related

Synergy ROM (484) Clean install -- broken camera/GPS not connecting

As can be gleaned from the thread title, I install the latest Synergy ROM (484) and my camera app crashes as well as GPS failing to lock on. I have tried different camera apps and using GPS Status. Does anyone know of a fix, as I've tried searching through the 3000 page forum? LOL
Thanks in advance for any help
I just rewiped and flashed and now my GPS is working, but camera is still broken. :'(
Flash a different kernel. Like kt747 tw version.
Sent from my SCH-I535 using Tapatalk 2
hybridxer0 said:
I just rewiped and flashed and now my GPS is working, but camera is still broken. :'(
Click to expand...
Click to collapse
Doubt if anyone has a fix because the ROM is not broken. I've used the last 3 builds and never had a problem. Download fresh and wipe and try again. I recommend starting with the included stock kernel. and oh yes, make sure you are on the correct modem firmware wince the ROM does not install that.
Bad download? Try downloading again.
Sent from my SCH-I535 using Tapatalk 4 Beta
Did you superwipe? Flash any firmware update?
Firmware is key. Not all roms have been rebased to match the newest. Make sure you flash the firmware with .Tz file. Seen pages of people with camera problems on synergy because of this.
Sent from my SCH-I535 using xda premium
blueb0x said:
Did you superwipe? Flash any firmware update?
Firmware is key. Not all roms have been rebased to match the newest. Make sure you flash the firmware with .Tz file. Seen pages of people with camera problems on synergy because of this.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
MF1ModemandBootchainwithMb1TZ.zip is what I flashed. No bueno.
tpike said:
Bad download? Try downloading again.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
file checker verified twice.
DigitalMD said:
Doubt if anyone has a fix because the ROM is not broken. I've used the last 3 builds and never had a problem. Download fresh and wipe and try again. I recommend starting with the included stock kernel. and oh yes, make sure you are on the correct modem firmware wince the ROM does not install that.
Click to expand...
Click to collapse
I'm sorry if I implied the ROM was at fault, perhaps I am missing some step, but I did just now do a complete wipe (3x), re-downloaded the ROM and firmware, and it seems the only problem MY phone has is the Camera
hybridxer0 said:
I'm sorry if I implied the ROM was at fault, perhaps I am missing some step, but I did just now do a complete wipe (3x), re-downloaded the ROM and firmware, and it seems the only problem MY phone has is the Camera
Click to expand...
Click to collapse
I'd suggest you flash the VRBMB1 firmware.
call elegoil
SlimSnoopOS said:
I'd suggest you flash the VRBMB1 firmware.
Click to expand...
Click to collapse
Tried that. *Sigh* I think I am going to go to a different ROM, not having the Camera work is a dealbreaker. Whether it's ignorance on my part, or lack of documented resolutions for this problem that I have seen others have, I can't go this long without it.
Maybe flashing another ROM and coming back at a later time may solve the issue.
hybridxer0 said:
Tried that. *Sigh* I think I am going to go to a different ROM, not having the Camera work is a dealbreaker. Whether it's ignorance on my part, or lack of documented resolutions for this problem that I have seen others have, I can't go this long without it.
Maybe flashing another ROM and coming back at a later time may solve the issue.
Click to expand...
Click to collapse
I had the same problem and I fixed it by flashing a different kernel. I used the kt47 kernel and Now everything works.
Good luck
Peace
tylerlawhon said:
Flash a different kernel. Like kt747 tw version.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
OP, try this if you havent been done with this problem already. its 4am for me right now and I'm tired as balls and was at my wits end but then after flashing god knows how many different options hoping the camera would magically come back...i flash the kt747 tw kernel and its all gravy now. I dont understand how. I dont want or need to understand how. I am thankful! :good:

JellyBeans v19 ROM

I have been running this ROM for a few days but one little setting was getting on my nerves so of course I do a clean wipe and reinstall because I am OCD . Reinstall went fine then after everything is updated and looking good I lost the "Custom Settings" tab under Settings??? Anybody have this issue, I think I did a good search for an answer........
Dirty flash the rom.
Sent from my SCH-I535 using Tapatalk 4
And again its gone....
SlimSnoopOS said:
Dirty flash the rom.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Just did a new clean install and everything worked great again until I went into Settings>Custom Rom and paid the donation for the Updater App, as soon as the Play Store took my money it updated the ROM updater app and once again I lost the Settings. Checked the JB ROM thread but couldn't post there. Does anybody know why? I hate doing a dirty flash but at 11pm on a Sunday night I don't have time to reinstall............
jimwick said:
Just did a new clean install and everything worked great again until I went into Settings>Custom Rom and paid the donation for the Updater App, as soon as the Play Store took my money it updated the ROM updater app and once again I lost the Settings. Checked the JB ROM thread but couldn't post there. Does anybody know why? I hate doing a dirty flash but at 11pm on a Sunday night I don't have time to reinstall............
Click to expand...
Click to collapse
That just might be a bug with the OTA app itself. I've never gone inside there and I have always had my rom settings on Beans. I've run every build, its my primary rom of choice.
I think it was, trying to learn as much as possible on this phone so flashing different ROMS everyother day to get more familiar with it. Liking the Beans and Clean7 so far the best.... As I tell my new guys in work, your not really a Tech till you actually break something.......

[UNOFFICAL] [CM11] [4.4] d2kat

Welcome to d2kat!
these will be weekly builds of cm11 by tvall and myself.
there isnt much to be said about these builds execpt for what is broken on CM will be broken here.
any ROM/KitKat related questions can be asked in the Q&A here:
ROM:https://mega.co.nz/#!wBRyVQQZ!IYvnu2KwJihG86115meP8EvaIQVcgoRyMKvtuMMcvHU
Gapps:http://www.mediafire.com/download/a84xzwn0w5lplhz/pa_gapps-modular-full-4.4-20131111-signed.zip
Thanks:
 @tvall: builds
 @LeslieAnn: build server
Cyanogenmod: everything
apparently we are starting again. taking post #2
so, this thread is apparently just for my builds. since i already made it clear that i am not committed to actively working on the d2vzw, I'm assuming its to force the other devs into making their own threads for their roms.
quick faq:
I will probably keep building these for a while to keep people satisfied until cm releases official nightlies. no promises though
my builds will be given to cammykool, untested for him to post. I do not own a d2vzw, and cannot afford to go buy one. buy me one, and I'll be able to test and fix things.
my builds will almost always be only cm code, what they have pushed to github and fixes waiting to be merged. I don't feel like fixing bugs myself. the devs that actually own this device can do that, and I'll merge it into my builds as needed.
cammy wants me to push out new builds on a weekly basis. i have no idea why he likes my builds so much, but i can handle weekly or more frequent experimental untested builds
Re-subscribed Thank you, you guys are awesome!!!
Flashing as I type this! Thank you so much!
Thanks!
SovietKommando said:
Flashing as I type this! Thank you so much!
Click to expand...
Click to collapse
Let us know how it is! I'd love to try it out but I can't mess with my phone atm
Sent from my SCH-I535 using Tapatalk
Skyrocketing said:
Let us know how it is! I'd love to try it out but I can't mess with my phone atm
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Seems that Wi-Fi is broken, at least it is for me. This is on a clean flash.
SovietKommando said:
Seems that Wi-Fi is broken, at least it is for me. This is on a clean flash.
Click to expand...
Click to collapse
anything else?
tvall said:
anything else?
Click to expand...
Click to collapse
SD card was also still broken for me (I'm thinking it might just be my SD card at this point, I'm gonna try out another one), but everything else seemed to work fine.
I thought in the other thread I saw something about CM11 not flashing with TWRP... confirm/deny with this build?
This rom really needed this fresh new start Also, what is different from this build in the op and the 2013-11-13-unofficial by sspencer? Anything fixed in it that isnt in the sspencer build? Thanks
Gonna need a lot more clarity in the OP or else this thread will be exactly the same as the last one. I'll start by adding instructions:
THESE BUILDS ARE NOT 100% OPERATIONAL.
-They boot, I flashed it last night and everything worked for me (front camera, SD card, WiFi..etc) browser FC'd on me once but that might have been something else.
-You will probably get 2 galleries, not sure why or which one to disable, I didn't get that far.
Flash instructions:
-YOU MUST USE CWM, TWRP IS BROKEN
-Factory reset
-Wipe Dalvik / Cache
-Wipe system
-Wipe Data
-Flash ROM
-Boot up, let it sit for a minute
-Reboot recovery and flash the GAPPs in OP
-Reboot and sign in
-Profit.
These were pretty much the instructions last night, and the ones I followed and everything worked fine for me.
tvall said:
anything else?
Click to expand...
Click to collapse
I literally just flashed back to 4.3.1 but I ran this build for the past 3 days including the version from yesterday and today. It is seriously close to being able to be used as a DD. TVall, it seems like you are developing this until CM releases so I thought I'd say what wasn't working for me. I did not have the SD card problem but i know many do. I did have these things not working...
1. Certain apps would not reinstall from the Play Store. When I tried it said USB Storage not found
2. When launching Google+ it says network not found retry. I can view Facebook and other apps that have to get on network just fine.
3. Unable to connect to XDA using tapatalk, although I'm not sure that one is rom related as I am now back on 4.3.1 and it is still hit or miss.
4. Overall seems kinda sluggish and i'm sure that will get ironed out as the rom gets more polished. I don't necessarily mean the OS is sluggish but apps are and opening apps takes a little longer
I will probably flash back later or tomorrow as I already miss the launcher but nothing too serious here for me. Like I said it is extremely close to DD status right now and I really liked the ROM and appreciate all of your hard work.
All in all seemed OK expect WiFi and SD card issue, that's the only things I noticed. And (beepea206) yes that is true about the not flashing it with TWRP.
Sent from my SCH-I535 using XDA Premium 4 mobile app
beepea206 said:
I thought in the other thread I saw something about CM11 not flashing with TWRP... confirm/deny with this build?
Click to expand...
Click to collapse
issue was fixed in twrp 2.6.3.1 or 2.6.3.2, i don't remember. twrp 2.6.3.3 fixed bugs in .1.
at the time of this post, i believe 2.6.3.0 is the most recent build officially available for the d2vzw. this is why i prefer the nexus line
joedajoester said:
This rom really needed this fresh new start Also, what is different from this build in the op and the 2013-11-13-unofficial by sspencer? Anything fixed in it that isnt in the sspencer build? Thanks
Click to expand...
Click to collapse
this build is made blindly by me. sspencer actually owns a d2vzw and can test and fix things. all i do is build and upload. his builds will be mostly working usually. mine will be just cm and fixes they make.
Download link not working
The download link for the ROM reads this when clicked:
"The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user."
I'm running the 4.4 from the older post before this one and would really like to update considering the front camera currently doesn't work on my ROM and may fix a few things. I've the link on multiple browsers and even installed the mega extension and it still doesn't work. Could you reupload?
ArcticSpyder said:
The download link for the ROM reads this when clicked:
"The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user."
I'm running the 4.4 from the older post before this one and would really like to update considering the front camera currently doesn't work on my ROM and may fix a few things. I've the link on multiple browsers and even installed the mega extension and it still doesn't work. Could you reupload?
Click to expand...
Click to collapse
If you read the forums this build is "dead". So yes link no longer available.
Sent from my SCH-I535 using XDA Premium 4 mobile app
I made a new build and gave it to cammy. Guess he didn't post. Ill post a link later
tvall said:
I made a new build and gave it to cammy. Guess he didn't post. Ill post a link later
Click to expand...
Click to collapse
All you guys are doing amazing eork on this. ~thumbs up~
Sent from my SCH-I535 using XDA Premium 4 mobile app
---------- Post added at 09:26 PM ---------- Previous post was at 09:26 PM ----------
nickhex89 said:
All you guys are doing amazing eork on this. ~thumbs up~
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Work not eork
Sent from my SCH-I535 using XDA Premium 4 mobile app
Tvall you still gonna post your build?
Sent from my SCH-I535 using Tapatalk

SCH-S968C Roms.

I have rooted my phone (SCH-S968C) and everything. I read a forum that said you can install a rom from SCH-i535 and It was successful but you couldn't call and text. I need a rom exactly for the SCH-S9968C. Thanks :fingers-crossed::laugh:
help!!
Did you ever find the correct rom? I flashed the new gummy rom. It works great but i have no mobile data!! I cant get my 3g or anything. When i go to set a new apn it will not save. Please tell me you found somthing that may help me.
WesSmiley315 said:
I have rooted my phone (SCH-S968C) and everything. I read a forum that said you can install a rom from SCH-i535 and It was successful but you couldn't call and text. I need a rom exactly for the SCH-S9968C. Thanks :fingers-crossed::laugh:
Click to expand...
Click to collapse
lilfroggy1189 said:
Did you ever find the correct rom? I flashed the new gummy rom. It works great but i have no mobile data!! I cant get my 3g or anything. When i go to set a new apn it will not save. Please tell me you found somthing that may help me.
Click to expand...
Click to collapse
both of you start your journey here, all the goodies, just takes a few fixes and 3rd party apps if that's cool with you, its explained in the thread just read carefully, there is even a stock tar, unbrick.img, modem.zip, and bin files for the camera fix earlier in the thread just look back til you find what you need, hope you got an old sim card though, doesn't have to be active just as long as you have one, good luck! ENJOY
http://forum.xda-developers.com/showthread.php?t=2516498&page=30
Sent from my SCH-S968C using Tapatalk
N_psycho_PD_uh? said:
both of you start your journey here, all the goodies, just takes a few fixes and 3rd party apps if that's cool with you, its explained in the thread just read carefully, there is even a stock tar, unbrick.img, modem.zip, and bin files for the camera fix earlier in the thread just look back til you find what you need, hope you got an old sim card though, doesn't have to be active just as long as you have one, good luck! ENJOY
http://forum.xda-developers.com/showthread.php?t=2516498&page=30
Sent from my SCH-S968C using Tapatalk
Click to expand...
Click to collapse
I eventually uninstalled the clean ROM and reflashed my stock rom. I have yet to try a new ROM since. Have you flashed a ROM where everything works?
Sent from my SCH-S968C using XDA Free mobile app
ROMS with newly found working fixes are in the thread, all the d2lte roms and d2vzw roms are now working except for stock camera and stock MMS but there is a camera app that fixes camera and a fix for MMS through hangouts or a 3rd party text app, other than that its smooth sailing on all ROMs, there's even a working CM12 (lollipop 5.0) ROM!!!!! SWEET
Sent from my SCH-S968C using Tapatalk
What Roms on what pages in the thread? Thanks.
Sent from my SCH-S968C using XDA Free mobile app
WesSmiley315 said:
What Roms on what pages in the thread? Thanks.
Sent from my SCH-S968C using XDA Free mobile app
Click to expand...
Click to collapse
the thread discusses needed FIXES for the ROMs, do a search for the d2vzw and d2lte ROMs, they are in the verizon S3 forums, find the ROM you want but go back to the thread I linked to find how to make the ROMs work, you'll have to read the thread and do the work yourself but there are fixes for everything you'll run into in the thread
Sent from my SCH-S968C using Tapatalk
Awesome thank you very much!
Sent from my SCH-S968C using XDA Free mobile app
WesSmiley315 said:
Awesome thank you very much!
Sent from my SCH-S968C using XDA Free mobile app
Click to expand...
Click to collapse
search for mastamoon's CM12 (lollipop), fixes for it in thread also, you'll need an old sim no matter what ROM you use
Sent from my SCH-S968C using Tapatalk
Help!
I have no service after flashing several custom roms. I think i may have screwed up the modem. Is there any way i can get straight talk service on my sch-968c with cm11 or 12 installed and how?
Michaelvfricke said:
I have no service after flashing several custom roms. I think i may have screwed up the modem. Is there any way i can get straight talk service on my sch-968c with cm11 or 12 installed and how?
Click to expand...
Click to collapse
No, you just need to get a CDMA SIM, a Verizon LTE 4G SIM is best, yes, I know the device is 3G, dont bother asking or wondering, just take my word for it, ALL of the LP d2vzw ROMs require SIM because they are for the Verizon S3 which is a 4G device and 4G devices require SIM for service and data, that makes us need it also. Another thing, stock MMS won't work with any other SIM than Verizon 4G SIM then dialing *228 to auto program SIM then manually edit APNs. Get a SIM and I'll set you up with what you need. Until you get a SIM just go back to stock or one of the kit kat ROMs from the first 6 months of last year and you won't need the SIM on those.
Does anyone know if Android M (Marshmellow) will be available for the S3 ? (d2vzw) ?
Jaws4God said:
Does anyone know if Android M (Marshmellow) will be available for the S3 ? (d2vzw) ?
Click to expand...
Click to collapse
Its in the works but I can't tell you when it will be available.
Droidriven said:
Its in the works but I can't tell you when it will be available.
Click to expand...
Click to collapse
awesome! Did they already make a Preview version? Can I do anything to help?
Jaws4God said:
awesome! Did they already make a Preview version? Can I do anything to help?
Click to expand...
Click to collapse
I don't know about the preview version. Everything is hush hush for now.
The team of guys I know are pretty good at what they do. Its mostly in the works upstream with the CM team. The guys I know are working as it comes from upstream. Its coming soon to the STS3 though. The team I know is already at work on it, they have it under control, I don't know about the other ROM teams though. It won't be out for beta testing for a couple of months so just be patient.
Droidriven said:
I don't know about the preview version. Everything is hush hush for now.
The team of guys I know are pretty good at what they do. Its mostly in the works upstream with the CM team. The guys I know are working as it comes from upstream. Its coming soon to the STS3 though. The team I know is already at work on it, they have it under control, I don't know about the other ROM teams though. It won't be out for beta testing for a couple of months so just be patient.
Click to expand...
Click to collapse
how are things going with it?
Sent from my SCH-I535
Jaws4God said:
how are things going with it?
Sent from my SCH-I535
Click to expand...
Click to collapse
No recent news or developments yet, they are still working on it, very few teams or developers have it ready to go yet, I've seen it released for other devices but not this one yet.

[Q&A] Gnabo ROM X Tab S feature

Q&A for Gnabo ROM X Tab S feature
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Gnabo ROM X Tab S feature. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I'm running a old version of Hyperdrive v6 on a N8013 Android 4.1.2. According to rootchecker, my bootloader is N8013UEUCMC2 and Kernel version is 3.0.31-813049.
I was looking at Gnabo's thread and I'm wondering if I need to flash any of these, Kernel for N801X, WiFi Fix for N801X and Remove phone stuff for N801x, or are those already included in your ROM?
Thanks
dax711 said:
I'm running a old version of Hyperdrive v6 on a N8013 Android 4.1.2. According to rootchecker, my bootloader is N8013UEUCMC2 and Kernel version is 3.0.31-813049.
I was looking at Gnabo's thread and I'm wondering if I need to flash any of these, Kernel for N801X, WiFi Fix for N801X and Remove phone stuff for N801x, or are those already included in your ROM?
Thanks
Click to expand...
Click to collapse
all are include in the rom
AhmedSafian said:
all are include in the rom
Click to expand...
Click to collapse
Thanks!! Can;t wait to finally get off 4.1.2
dax711 said:
Thanks!! Can;t wait to finally get off 4.1.2
Click to expand...
Click to collapse
Just to let you know I had to install the wifi fix after installing your rom. I haven't had time to play with it too much but so far it seems to run very smoothly
dax711 said:
Just to let you know I had to install the wifi fix after installing your rom. I haven't had time to play with it too much but so far it seems to run very smoothly
Click to expand...
Click to collapse
I was wondering, you know that page with 6 sections that shows news and side sync. How do I open the news stories? I figured out that you can flip up and down to scroll through different stories but can't figure out how to open the story.
Also, this isn't related to your rom but I've been out of the loop for awhile, can you tell me what is the best current solution for installing flash for websites.
Thanks again, I've been using it a lot for the last few hours after I got wifi working and I'm really loving it!
hi
What recovery you use?
I tried to philz recovery and the TWRP, but the installation takes only a few seconds and nothing in this device.
Sorry for my english...
Long time gnabo fan here, eagerly waiting for V5.
santosrps123 said:
hi
What recovery you use?
I tried to philz recovery and the TWRP, but the installation takes only a few seconds and nothing in this device.
Sorry for my english...
Click to expand...
Click to collapse
I used CWM
dax711 said:
I used CWM
Click to expand...
Click to collapse
What version of CWM did you use ?
electrikjesus said:
What version of CWM did you use ?
Click to expand...
Click to collapse
6.0.1.1
dax711 said:
I was wondering, you know that page with 6 sections that shows news and side sync. How do I open the news stories? I figured out that you can flip up and down to scroll through different stories but can't figure out how to open the story.
Also, this isn't related to your rom but I've been out of the loop for awhile, can you tell me what is the best current solution for installing flash for websites.
Thanks again, I've been using it a lot for the last few hours after I got wifi working and I'm really loving it!
Click to expand...
Click to collapse
you just can click on the story if you were installed flipboard
and for flash you can also google it and installed like any apk
AhmedSafian said:
you just can click on the story if you were installed flipboard
and for flash you can also google it and installed like any apk
Click to expand...
Click to collapse
Thanks, everything still running smoothly.
Lost Root
Can anyone point me to the proper files and procedure to get this Rom Rooted?
I came from Gnabo8 Rooted and TWRP.
I need to get the Root back.
Thanks,
I think, he testing our patience
ronimus said:
Can anyone point me to the proper files and procedure to get this Rom Rooted?
I came from Gnabo8 Rooted and TWRP.
I need to get the Root back.
Thanks,
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1831152
Just follow method 2 and you should get root.
No working 3G?
Hi, it is possible to enable N8000 data network with Gnabo rom X tab S?
I'm really enjoying it, thank you!
sorry my poor english,
Tab S Sensation ROm Will Not Install
When I try to install this ROM, I get the following error, am using PhilZ Touch 6 recovery CWM 6.0.4.7.
The error is;
format () expects 5 args, got 4
E:Error in /data/media/0/download_rom/TAB.S.Sensation.V6.n801x.zip
(status 7)
Installation aborted.
I did a Wipe Data/Factory Reset. My internal storage has about 1/6 G free, and the SDCARD has about 2 G free.
What could be wrong, I have downloaded the ROM twice now.
Any suggestion appreciated.
Thanks
what is your device?
try you first apply Gnabo rom? :good:
@AhmedSafian thank you for your hard work. This ROM is definitely the one that made my tab look new. Just wanted to report few things.
(N8013)
1) xposed is not pre-installed? If ever I'll do it manually, which version would you recommend.
2) I installed a HULU app since I do have an account with them, (it's like Netflix) it doesn't run. Any suggestions on what to do with it?
3) Is Sound Alive better than (Dolby Digital)?
Sent from my SM-G9250 using Tapatalk

Categories

Resources