By this time you may have been updated your LAVA Iris 501 to Jelly Bean 4.1.1
If not then you can read my post HERE and update your LAVA Iris 501 to Jellybean.
Now it is time to Root your mobile.
Earlier with ICS; Rooting was done with "Root with Restore by Bin4ry v15" but now with Jellybean, this process will not work.
Steps for Rooting:
Download and install MediaTek Driver
Download CWM Recovery from link given in my post
I am also giving link for Scatter File in-case you do not have Scatter File
Flash your phone with this CWM Recovery using SP Flash Tool (Process given below)
Process for Flashing CWM:
01. Make sure that mobile is Switch Off and not connected with PC
02. Create a separate folder in PC; for example "Recovery"
03. Copy Scatter File and CWM Recovery in this folder
04. Rename recovery_cwm_6.0.1.5_iris.img file to recovery.img
05. Start SP Flash Tools
06. Click on Scatter Loading button>Browse to "Recovery" Folder and select Scatter File
07. Now you will find that only Recovery file is checked in SP Tools
08. Click Download button
09. It will give you warning, "Not ALL images are correctly loaded, which may cause boot up issue! Do you still want to go on downloading anyway?"
10. Click on "Yes"
11. Remove mobile battery and re-insert after 3-4 seconds (Do-not Switch ON Mob)
12. Connect mobile to PC with USB Cable
13. Flashing will start and it will be done in few seconds
14. Disconnect USB cable and Power On Mobile.
Click to expand...
Click to collapse
Download Superuser-3.1.3-arm-signed.zip and su-bin-3.1.1-arm-signed.zip from links given in my post
Copy both files to SD Card
Boot in to Recovery
Select Install zip from sdcard and install Superuser-3.1.3-arm-signed.zip
Donot reboot your phone now and install su-bin-3.1.1-arm-signed.zip
Now reboot your phone
After reboot, phone will take approx. 4 to 5 minute for first boot
Downloads: Links Updated
SP Flash Tool v3.1248.0.96
Media Tek Driver
New CWM Recovery 6.0.3.0
Superuser-3.1.3-arm-signed
su-bin-3.1.1-arm-signed
Scatter File
Lava Iris 501 rooting
Not able to download. Says download limit reached.
venganan said:
Not able to download. Says download limit reached.
Click to expand...
Click to collapse
Download links updated.
how do i have to flash CWM via Sp tool like your JB firmware.
click Scatter-loading button to load the scatter file. It will load Firmware files. Click on Firmware Upgrade Button. OR Click on Download Button?
manrock111 said:
how do i have to flash CWM via Sp tool like your JB firmware.
click Scatter-loading button to load the scatter file. It will load Firmware files. Click on Firmware Upgrade Button. OR Click on Download Button?
Click to expand...
Click to collapse
Click firmwere upgrade... make sure u repaced recovery....
Sent from my IRIS_501 using xda app-developers app
manrock111 said:
how do i have to flash CWM via Sp tool like your JB firmware.
click Scatter-loading button to load the scatter file. It will load Firmware files. Click on Firmware Upgrade Button. OR Click on Download Button?
Click to expand...
Click to collapse
Process added in my post.
kamal882 said:
By this time you may have been updated your LAVA Iris 501 to Jelly Bean 4.1.1
Now it is time to Root your mobile.
Earlier with ICS; Rooting was done with "Root with Restore by Bin4ry v15" but now with Jellybean, this process will not work.
Steps for Rooting:
Download CWM Recovery from link given in my post
I am also giving link for Scatter File in-case you do not have Scatter File
Flash your phone with this CWM Recovery using SP Flash Tool (Process given below)
Download Superuser-3.1.3-arm-signed.zip and su-bin-3.1.1-arm-signed.zip from links given in my post
Copy both files to SD Card
Boot in to Recovery
Select Install zip from sdcard and install Superuser-3.1.3-arm-signed.zip
Donot reboot your phone now and install su-bin-3.1.1-arm-signed.zip
Now reboot your phone
After reboot, phone will take approx. 4 to 5 minute for first boot
Downloads: Links Updated
CWM Recovery
Superuser-3.1.3-arm-signed
su-bin-3.1.1-arm-signed
Scatter File
Click to expand...
Click to collapse
sir can u say whether this will work for lava iris 455 which is also jellybean 4.1.1 ???
iamnimit said:
sir can u say whether this will work for lava iris 455 which is also jellybean 4.1.1 ???
Click to expand...
Click to collapse
Process is same but in case of lava iris 455, it has got Screen Size 4.5 Inches and Resolution is qHD, 540 x 960 Pixels. Hence CWM Recovery may not work properly with this device because here attached CWM Recovery is for Lava Iris 501 screen size. You may get white screen in recovery mode. Hence I will not suggest to install CWM Recovery given in my post in your device until you have official recovery with you or try to find out a compatible CWM Recovery for your device.
kamal882 said:
Process is same but in case of lava iris 455, it has got Screen Size 4.5 Inches and Resolution is qHD, 540 x 960 Pixels. Hence CWM Recovery may not work properly with this device because here attached CWM Recovery is for Lava Iris 501 screen size. You may get white screen in recovery mode. Hence I will not suggest to install CWM Recovery given in my post in your device until you have official recovery with you or try to find out a compatible CWM Recovery for your device.
Click to expand...
Click to collapse
u mean i shud try CWM recovery of other 4.5 inches qHD phones????
n sir how to enter into recovery of lava iris 455????
Rooted Successfully
kamal882 said:
By this time you may have been updated your LAVA Iris 501 to Jelly Bean 4.1.1
Now it is time to Root your mobile.
Earlier with ICS; Rooting was done with "Root with Restore by Bin4ry v15" but now with Jellybean, this process will not work.
Steps for Rooting:
Download CWM Recovery from link given in my post
I am also giving link for Scatter File in-case you do not have Scatter File
Flash your phone with this CWM Recovery using SP Flash Tool (Process given below)
Download Superuser-3.1.3-arm-signed.zip and su-bin-3.1.1-arm-signed.zip from links given in my post
Copy both files to SD Card
Boot in to Recovery
Select Install zip from sdcard and install Superuser-3.1.3-arm-signed.zip
Donot reboot your phone now and install su-bin-3.1.1-arm-signed.zip
Now reboot your phone
After reboot, phone will take approx. 4 to 5 minute for first boot
Downloads: Links Updated
CWM Recovery
Superuser-3.1.3-arm-signed
su-bin-3.1.1-arm-signed
Scatter File
Click to expand...
Click to collapse
Rooted Successfully. Thanks
kamal882 said:
By this time you may have been updated your LAVA Iris 501 to Jelly Bean 4.1.1
Now it is time to Root your mobile.
Earlier with ICS; Rooting was done with "Root with Restore by Bin4ry v15" but now with Jellybean, this process will not work.
Steps for Rooting:
Download CWM Recovery from link given in my post
I am also giving link for Scatter File in-case you do not have Scatter File
Flash your phone with this CWM Recovery using SP Flash Tool (Process given below)
Download Superuser-3.1.3-arm-signed.zip and su-bin-3.1.1-arm-signed.zip from links given in my post
Copy both files to SD Card
Boot in to Recovery
Select Install zip from sdcard and install Superuser-3.1.3-arm-signed.zip
Donot reboot your phone now and install su-bin-3.1.1-arm-signed.zip
Now reboot your phone
After reboot, phone will take approx. 4 to 5 minute for first boot
Downloads: Links Updated
CWM Recovery
Superuser-3.1.3-arm-signed
su-bin-3.1.1-arm-signed
Scatter File
Click to expand...
Click to collapse
is MTK driver is must for rooting cause i have not driver and plz can u provide me its driver and tell me how its will be install in window 7 32 bit
xeroxguy said:
is MTK driver is must for rooting cause i have not driver and plz can u provide me its driver and tell me how its will be install in window 7 32 bit
Click to expand...
Click to collapse
This method is only for LAVA Iris 501 Jellybean 4.1.1
If you have ICS in your phone then first you need to upgrade the firmware of your mobile to Jellybean.
Detail is given in my post HERE
I have also updated my post and now you can download driver from given link.
To install the driver, you need to right click on each inf files and select install.
Let me know if it works for you.
:laugh::laugh::laugh::laugh::laugh::laugh::laugh:
xeroxguy said:
plz friend if you have some time for me then can u come on gtalk then i can tell u my problem in detail
my id is [email protected]
and m online now hope you come soon
Click to expand...
Click to collapse
Solved, now your phone is rooted.
sir can u say whether this will work for lava iris 454 which is 4.0.4 ???
aakashing said:
sir can u say whether this will work for lava iris 454 which is 4.0.4 ???
Click to expand...
Click to collapse
Steps are same but you need to use CWM Recovery of Iris 454. Will post soon.
Dear Kamalji ,Can you make a video tutorial for how to root lava iris 501 or a tutorial with screenshots.? It will be highly useful for newbies like me .Also can you give the process to Unroot the phone.
Thanks in Advance.
How to boot into recovery in iris 501 ? In galaxy we used to press power+volume up+home button simultaneously but here ,there is no home button.Pls help.
urs_rahul said:
How to boot into recovery in iris 501 ? In galaxy we used to press power+volume up+home button simultaneously but here ,there is no home button.Pls help.
Click to expand...
Click to collapse
Volume up + Power button
Sent from my Lava Iris 501
successfully rooted ...thanks mr.kamal
Installing CWM Recovery or TWRP recovery to your Phone Voids warranty and I am not Responsible For any
Damage to your phone do at your own risk...
you need to root first you mobile..(google it how to root micromax 3d)
than follow steps
hey guys u need to install custom recovery to install custom rom our device..
Download the CWM Recovery. (from below)
Rename it to recovery.img and transfer it to your sdcard.
Download MobileUncle MTK Tools from play store. or google it
Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
Your phone will reboot into the cwm recovery. you get the custom recovery in your mobile....
and i also attached twrp custom recovery
please hit thanks to appreciate my work....
port 4.4 for 3d
DGEEEK said:
Installing CWM Recovery or TWRP recovery to your Phone Voids warranty and I am not Responsible For any
Damage to your phone do at your own risk...
you need to root first you mobile..(google it how to root micromax 3d)
than follow steps
hey guys u need to install custom recovery to install custom rom our device..
Download the CWM Recovery. (from below)
Rename it to recovery.img and transfer it to your sdcard.
Download MobileUncle MTK Tools from play store. or google it
Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
Your phone will reboot into the cwm recovery. you get the custom recovery in your mobile....
and i also attached twrp custom recovery
please hit thanks to appreciate my work....
Click to expand...
Click to collapse
port android kitkat
Hello,
My Mobile name is Micromax Bolt A69 It's Chipset Broadcom. I want to use custom rom into my mobile .. so, i need backup first but i didn't find any cwm recovery img online please anyone can give a cwm recovery for Micromax Bolt A69..or any please port a cwm recovery img. it's urgent please help ... I'll thankful to you if can do it...
Micromax A69
Sir my mmxa69 its recovery mode is deleted my me by mistake, plzz help me sir. Plz send me any recovery mode of this model. Plzzzzzz help sir i m in a very bad condition
Hi there.....please help me...I by my mistake deleted my micromax a69's recovery......How to get it back?
Any recovery will work....thanks....my email [email protected]
My device is rooted.....
Hi, If you lose your stock recovery & boot img don't worry.. i have both imgs in my cloud storage dropbox account download zip file:
http://bit.ly/1WRGe5g
How to flash stock recovery for Micromax A69 Bolt:
Follow Step by Step:
- Download zip file
- Download "Flashify" app by Google Play or Google it.
- Now extract zip file and install "Flashify"
- Open Flashify and root permission it.
- Now Select Flash Tab to Recovery image
- Click Chose Path Find it "Recovery.img" where you extracted
- Final step: hit flash button!
Now it will be rebooting to stock recovery!! if it show stock recovery then that mean you have successfully flash stock recovery..
If you any problem facing inbox me or contact.txt to find my information thanks
link is not correct
I can't root lenovo A5000 lollipop s124 update
Can anyone help me rooting my device ?
Note: I tried all rooting app and on PC all failed.
Me too. Can someone help us
Root tutorial lenovo a5000 s124
I want you guys read this carefully, follow all my step, believe in me, if you dont believe me, ignore this, if you find this worked and useful, give credit to everyone involved.
1. Follow this guy tutorial just to flash recovery... Follow his step until the flash COMPLETE. DONT FOLLOW HIS WAY TO OPEN RECOVERY, because our phone need to press VOL UP + VOL DOWN + POWER BUTTON
P/S: i can't post link, but search in google "Tutorial how to flash TWRP 2.8.7.0 For Lenovo A5000 in Lollipop version" by AndroidCrips.
2. Try open the recovery, but i remind you, THIS RECOVERY CANNOT FLASH SUPERSU.ZIP. just check the recovery, is it there? If its not there, flash the recovery again. DONT FLASH ANYTHING ON THE RECOVERY!
3. Install LATEST KINGROOT, and the root will work. Install MobileUncle or other app to flash new recovery, since the old recovery just decoy.
TWRP recovery for Panasonic T44
TWRP for Panasonic T44 ported from TWRP 3.1.1-0-AMD.Team™(MT6580 Kernel:3.18.19). There may be some bug but I do most of the work.
I am not responding if any wrong happen with your device.
2 method to install TWRP recovery :
> Install through ADB.
(You will need to unlock bootloader)
> Install through SP Flash tool.
Download TWRP 3.1.1 here :good:
Want to root?
Download SuperSU and flash it.
Its not working! Its booting into normal recovery that comes with the phone
Bro it's really nice initiative I have been waiting this for two years.