Hi guys, I created ClockWorkMod v5.5.0.4 for Karbonn A16
NOTE THAT BY FLASHING CUSTOM RECOVERY YOUR WARRANTY IS VOIDED. I, MYSELF OR ANY OTHER MEMBER ARE NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR DEVICE. READ THE INSTRUCTIONS AND NOTE ALSO THAT YOU WILL FLASH IT AT YOUR OWN RISK.
How to install CWM on Karbonn A16:
0. Make sure device is rooted!!!
1. Backup your device using any other recovery or MTKDroidTools or SPFlash Tool
2. Install Flashify or Rashr from Google Play Store (Links Below)
3. Copy the boot.img and recovery.img to your sdcard
4. Launch Flashify or Rashr
5. Flash boot.img as boot
6. Flash recovery.img as recovery
7. Done!
How to Access recovery:
Turn off your phone. Press and hold Volume Up and Power button. Select recovery and ok.
OR
You can reboot to recovery using Flashify, Rashr or Link2SD.
OR
Install terminal emulator from Google Play Store and enter the following:
$su
#reboot recovery
Download:
boot.img
recovery.img
Flashify
Rashr
Link2SD
If you liked my work feel free to hit "Thanks" button!
HI,
I want a little help from you.
I've another device- Panasonic T31, which shares same processor (MTK6572) and resolution (480*800) as this device. So, can you guide me how can i port (or build) this CWM to my Panasonic device?
Any help will be appreciated.
BB23482 said:
HI,
I want a little help from you.
I've another device- Panasonic T31, which shares same processor (MTK6572) and resolution (480*800) as this device. So, can you guide me how can i port (or build) this CWM to my Panasonic device?
Any help will be appreciated.
Click to expand...
Click to collapse
You can try MTKDroid tools.
kvsjxd said:
You can try MTKDroid tools.
Click to expand...
Click to collapse
Tried MTK droid tool, but failed. Tried magic TWRP but same result.
I was thinking to build complete cwm recovery from scratch now. Any help?
BB23482 said:
Tried MTK droid tool, but failed. Tried magic TWRP but same result.
I was thinking to build complete cwm recovery from scratch now. Any help?
Click to expand...
Click to collapse
Only if you have kernel source.
@TheMadScientist Please close this thread.
Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator
Hi guys, I created TWRP for Xolo Q610s
NOTE THAT BY FLASHING CUSTOM RECOVERY YOUR WARRANTY IS VOIDED. I, MYSELF OR ANY OTHER MEMBER ARE NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR DEVICE. READ THE INSTRUCTIONS AND NOTE ALSO THAT YOU WILL FLASH IT AT YOUR OWN RISK.
How to install TWRP on Xolo Q610s:
0. Make sure device is rooted!!!
1. Backup your device using any other recovery or MTKDroidTools or SPFlash Tool
2. Install Flashify or Rashr from Google Play Store (Links Below)
3. Copy the recovery.img to your sdcard
4. Launch Flashify or Rashr
5. Flash recovery.img as recovery
6. Done!
How to Access recovery:
Turn off your phone. Press and hold Volume Up and Power button.
OR
You can reboot to recovery using Flashify, Rashr or Link2SD.
OR
Install terminal emulator from Google Play Store and enter the following:
$su
#reboot recovery
Download:
recovery.img
Flashify
Rashr
Link2SD
If you liked my work feel free to hit "Thanks" button!
good work
Any rom you found for the device?
piyushtilva said:
Any rom you found for the device?
Click to expand...
Click to collapse
I created 2-3 roms but for some reason the recovery is not allowing to flash the rom and instead throws an error
So still no developer for device except you. Can we get help from xolo one development?
piyushtilva said:
So still no developer for device except you. Can we get help from xolo one development?
Click to expand...
Click to collapse
I don't think anyone would come up with mods or roms for this device, also that I am not using this device anymore. But you can try porting mtk roms to your device. It's easy and you can find a lot of guides available on XDA or Web ?
@TheMadScientist Please close this thread.
Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator
Here are few names which have same cpu as LYF F1 i.e. Qualcomm Snapdragon 617 Processor:
Alcatel Idol 4,Sharp Aquos 507SH,Kyocera DuraForce Pro,Huawei G9 Lite,ZTE ZMax Pro,BlackBerry DTEK50,ZTE Axon Max,HTC One A9,ZTE Axon 7 Mini,Nubia Z11 Mini,Coolpad Max,Samsung Galaxy C5,Moto G4 Plus,Moto G4.
I have found the stock rom at the link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0".
Can anyone help please?
Good news for all the users of LYF F1 who wants to have twrp and root access.
I found the stock rom at link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0"
I extracted the stock rom and got the stock recovery,then I got the twrp recovery of ZTE Axon 7 Mini.
I ported the twrp by replacing only the zImage from the stock to the twrp,and kept the ramdisk the same in twrp.
It booted up well but I got a error that twrp could not mount any partition except the recovery.
I then got the twrp of Moto G4 Plus,but the twrp did not have the ramdisk,it only contains zImage,so I could not port it.
I then got the twrp of Samsung Galaxy C5 and ported it in the same way,but it put the phone into recovery bootloop,phone was booting into twrp,then switching off,then again booting to twrp,at one moment when phone was switched off for one second,I flashed again the previous working recovery.
I then ported the twrp recovery of ZTE Axon Max but it gave the same error that it could not mount any partition except the recovery.
Then I ported the twrp recovery of ZTE Nubia Z11 Mini and this one was successfull without any error,but the recovery was in chinese.I can not remember the whole thing but the first window appeared in front,I touched the lower right conrer and changed the language to english,since then everything is in english.The link of that recovery is "https://drive.google.com/open?id=0B2iZIwRNj3bpaEl3dWR1eXRsalk" and password is "Created-by-Tarasantan"
Now How did I flashed the twrp,I downloaded and extracted the stock rom,then I found a "_qcMUP.zip" within the zip "LYF F1 LS-5505 TOOL & DRIVERS.zip",then extracted the zip _qcMUP.zip,there in the support folder I found some windows softwares,I ran all of them to install the drivers and neccessary files.
Then in the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder I replaced the stock "recovery.img" with the twrp "recovery.img".And then I ran the "qcMUP.exe" in the _qcMUP folder which I previously extracted.
Now I clicked the do button in the upper right corner of "qcMUP.exe",then clicked upgrade,then I selected the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder.
Now I switched off the phone,then I pressed and hold volume up and down at the same time,and pluged the phone into the computer and the flashing started on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing was going on.
This will clear all the apps and data you previously have had in your internal memory.So you can back up all the installed app with es filexplorer,or super backup,and all the contacts and smses with super backup,then you must move all the backed up things and other neccessary things to the sd card.At the end put the latest supersu.zip in your sd card.
The next part is very important,when flashing is passed,you will unplug the phone from the computer,then press and hold the power and the volume up at the same time.You will be booted up into twrp then somehow change the language to english from chinese,then flash the supersu.zip from your sd card,if you do not boot into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that it does not replace the twrp recovery with the stock.
Alternatively
you can use the following method.I have not tested this method,but this should work.In this method you just need to download this file "TWRP For LYF F1.7z",from https://drive.google.com/open?id=0B2iZIwRNj3bpanRsaUM0OEdYV3c ,password is Created-By-Tarasantan .This recovery is made for exactly LS-5505,that means ro.product.device is LS-5505 ,ro.product.locale is en-IN and other properties are also changed for LS-5505.
Download and Extract the "TWRP For LYF F1.7z" file,then install the given drivers,then run the "qcMUP.exe".
Now Click the do button in the upper right corner of "qcMUP.exe" window,then click upgrade,then select the "LYF F1 LS-5505 TWRP 3.0.2" folder.
Now switch off the phone,then press and hold volume up and down at the same time,and plug the phone into the computer and the flashing should start on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing is going on.
This will not clear any apps and data that you previously have had in your internal memory.So you do not need to back up anything.But you need to put a supersu.zip in your sd card.
The next part is very important,when flashing is passed,unplug the phone from the computer,then press and hold the power and the volume up at the same time.Your phone should be booted up into twrp,then flash the supersu.zip from your sd card,if you do not boot your phone into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that the boot.img does not replace the twrp recovery with the stock one.
Link of a image of the window which will come when you first time boot into twrp
https://drive.google.com/open?id=0B2iZIwRNj3bpbTgySjdfRFZKUzg
Hey i am also have lyf f1 5505 ia want to root plz give me all the recommended links and processs
Plz help the lyf user
hi bro need help
twrp is password protected plz provide password
---------- Post added at 05:28 AM ---------- Previous post was at 05:05 AM ----------
thankyou ls5505 root done .............................................................................
Plz give me password.
plz sir give me password
AyanRangrez said:
plz sir give me password
Click to expand...
Click to collapse
Please Read the full post, password is Created-By-Tarasantan
Sir please give me Lyf f1 twrp password please in am very tensed
Vishul saxena said:
Sir please give me Lyf f1 twrp password please in am very tensed
Click to expand...
Click to collapse
R u being serious read the first post well dear! Or have a glass of water before that then re-read it again! I have mentioned so many times go through the pages! We are here to help you people not serve you! Read the whole topic.
Hii.. I need some help.
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Hello sir thank for the that wonderful information but i want help, i root my phone with help of your process full flash phone with twrp file but now my volte features is gone after flashing i try and remove recovery and flash with original stock rom then reboot normally but still my volte feature not enable i try with *#*#4636#*#* and check setting but there nothing happen i download universel volte patch file download from xda forum patch 1 and patch 2 and install through recovery after reinstall recovery but problem still same before install twrp my airtel sim was work on volte calling+4g but now lte only work no calling i was hide every thing with magiks manager but nothing was solve can u pls help me what should do thanks
Needsupport said:
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Click to expand...
Click to collapse
Yes u can but why u want to unlock when u install twrp recovery everything is in ur control after install magiks manger so many root app will solve many problem
Guys, kindly provide me a latest firmware for ls5505.
Today I am going to share rooting method for Lenovo k3 note running on android 6.0 Marshmallow safely. These method is developed by Russian developers on 4PDA.ru. I am just sharing this method so all lenovo k3 note users can root their android.
Note : I am not responsible if you bricked or damaged your android. Flash at your own risk.
Things Required :
Lenovo K3 note with custom recovery installed like CWM or TWRP
For flashing custom recovery refer this Guide
Patched boot img for lenovo k3 note. Download it from here
Update SuperSu.zip for flash in recovery. Download it from here
Follow steps :
Step 1 : Boot in recovery mode by pressing volume up, volume down and power button simultaneously.
Step 2 : Click on install and choose install image first. Navigate to patched boot image that you downloaded from above link and select.
Step 3 : Choose partition boot and slide right or click on flash to flash image but don't restart your android yet.
Step 4 : Go back click on install then install zip and find update SuperSu.zip that you downloaded from above link and flash.
Step 5 : Wipe Dalvik/ART cache for safety reason and reboot your android.
Congratulation. You successfully rooted your lenovo k3 note running on Marshmallow.
Check root status with root checker app.
( Sorry for my bad english)
Recently I was ask to root the blu vivo 5 mini, after hours of research i found nothing some deem it unrootable. i took on myself to port a recovery image to my surprise i did it and root the device. here is my guide to root the device or flash the twrp. i have plans to port roms for it but depends on the feedback i get to see if people want it.
ROOTING THE BLU VIVO 5 MINI
TOOLS
Code:
twrp recovery
scatter file
superSU zip
sp flash tool
here is the tools
oh **** i am a junior member i cant post links you have copy and paste the link sorry not my fault
COPY and PASTE
twrp
mega.nz/#!2MITTIoA!JmihaXIyc3BJOMFkcyHRgqMBPLy-RVi_HGB-_2agwN8
scatterfile
mega.nz/#!DZBxhaSL!UJkXksmf8Bn9bPS4G-dYO4TX5BhIdzuPEciE7XiFW7o
supersu
idroidspace.com/download-supersu-for-marshmallow-android-6-0-zip-apk/
sp
spflashtool.com/
step .1
open sp flash to and import the scatter file
step .2
locate the recovery section
step .3
locate the twrp.img file and import it to sp flash tool
step .4
set flash to download, then flash the twrp.img
you have successfully flash twrp to device.
rooting the device is relatively easy at this point
step. 5
add supersu zip to sd card or leave it on the device, boot your device in recovery mode
by holding on volume up and power button at the same time. select install add locate supersu.zip
and flash it on the device finish the device is rooted reboot to system
My name is Andrew Anderson i want to port some rom for the phone but i need to know if you guys want it before i do it .
if this thread has help please consider donating it help me drink a coffee every morning bye
I go to try on my phone
I'll not sure of this method because i already root with magisk, but i go to try for obtain TWRP with this
This should be better if we try with Magisk, i have installed this twrp and magisk in my Blu Vivo 5 Mini
I definitely try this for my phone with twrp and magisk.
Twrp V051 ...????
Root blu vivo mini 5 V051,???
porrasomar07 said:
Root blu vivo mini 5 V051,???
Click to expand...
Click to collapse
yes, this work for all model of blu vivo mini