By this time you may have been updated your LAVA Iris 501 to Jelly Bean 4.1.1
If not then you can read my post HERE and update your LAVA Iris 501 to Jellybean.
Now it is time to Root your mobile.
Earlier with ICS; Rooting was done with "Root with Restore by Bin4ry v15" but now with Jellybean, this process will not work.
Steps for Rooting:
Download and install MediaTek Driver
Download CWM Recovery from link given in my post
I am also giving link for Scatter File in-case you do not have Scatter File
Flash your phone with this CWM Recovery using SP Flash Tool (Process given below)
Process for Flashing CWM:
01. Make sure that mobile is Switch Off and not connected with PC
02. Create a separate folder in PC; for example "Recovery"
03. Copy Scatter File and CWM Recovery in this folder
04. Rename recovery_cwm_6.0.1.5_iris.img file to recovery.img
05. Start SP Flash Tools
06. Click on Scatter Loading button>Browse to "Recovery" Folder and select Scatter File
07. Now you will find that only Recovery file is checked in SP Tools
08. Click Download button
09. It will give you warning, "Not ALL images are correctly loaded, which may cause boot up issue! Do you still want to go on downloading anyway?"
10. Click on "Yes"
11. Remove mobile battery and re-insert after 3-4 seconds (Do-not Switch ON Mob)
12. Connect mobile to PC with USB Cable
13. Flashing will start and it will be done in few seconds
14. Disconnect USB cable and Power On Mobile.
Click to expand...
Click to collapse
Download Superuser-3.1.3-arm-signed.zip and su-bin-3.1.1-arm-signed.zip from links given in my post
Copy both files to SD Card
Boot in to Recovery
Select Install zip from sdcard and install Superuser-3.1.3-arm-signed.zip
Donot reboot your phone now and install su-bin-3.1.1-arm-signed.zip
Now reboot your phone
After reboot, phone will take approx. 4 to 5 minute for first boot
Downloads: Links Updated
SP Flash Tool v3.1248.0.96
Media Tek Driver
New CWM Recovery 6.0.3.0
Superuser-3.1.3-arm-signed
su-bin-3.1.1-arm-signed
Scatter File
Lava Iris 501 rooting
Not able to download. Says download limit reached.
venganan said:
Not able to download. Says download limit reached.
Click to expand...
Click to collapse
Download links updated.
how do i have to flash CWM via Sp tool like your JB firmware.
click Scatter-loading button to load the scatter file. It will load Firmware files. Click on Firmware Upgrade Button. OR Click on Download Button?
manrock111 said:
how do i have to flash CWM via Sp tool like your JB firmware.
click Scatter-loading button to load the scatter file. It will load Firmware files. Click on Firmware Upgrade Button. OR Click on Download Button?
Click to expand...
Click to collapse
Click firmwere upgrade... make sure u repaced recovery....
Sent from my IRIS_501 using xda app-developers app
manrock111 said:
how do i have to flash CWM via Sp tool like your JB firmware.
click Scatter-loading button to load the scatter file. It will load Firmware files. Click on Firmware Upgrade Button. OR Click on Download Button?
Click to expand...
Click to collapse
Process added in my post.
kamal882 said:
By this time you may have been updated your LAVA Iris 501 to Jelly Bean 4.1.1
Now it is time to Root your mobile.
Earlier with ICS; Rooting was done with "Root with Restore by Bin4ry v15" but now with Jellybean, this process will not work.
Steps for Rooting:
Download CWM Recovery from link given in my post
I am also giving link for Scatter File in-case you do not have Scatter File
Flash your phone with this CWM Recovery using SP Flash Tool (Process given below)
Download Superuser-3.1.3-arm-signed.zip and su-bin-3.1.1-arm-signed.zip from links given in my post
Copy both files to SD Card
Boot in to Recovery
Select Install zip from sdcard and install Superuser-3.1.3-arm-signed.zip
Donot reboot your phone now and install su-bin-3.1.1-arm-signed.zip
Now reboot your phone
After reboot, phone will take approx. 4 to 5 minute for first boot
Downloads: Links Updated
CWM Recovery
Superuser-3.1.3-arm-signed
su-bin-3.1.1-arm-signed
Scatter File
Click to expand...
Click to collapse
sir can u say whether this will work for lava iris 455 which is also jellybean 4.1.1 ???
iamnimit said:
sir can u say whether this will work for lava iris 455 which is also jellybean 4.1.1 ???
Click to expand...
Click to collapse
Process is same but in case of lava iris 455, it has got Screen Size 4.5 Inches and Resolution is qHD, 540 x 960 Pixels. Hence CWM Recovery may not work properly with this device because here attached CWM Recovery is for Lava Iris 501 screen size. You may get white screen in recovery mode. Hence I will not suggest to install CWM Recovery given in my post in your device until you have official recovery with you or try to find out a compatible CWM Recovery for your device.
kamal882 said:
Process is same but in case of lava iris 455, it has got Screen Size 4.5 Inches and Resolution is qHD, 540 x 960 Pixels. Hence CWM Recovery may not work properly with this device because here attached CWM Recovery is for Lava Iris 501 screen size. You may get white screen in recovery mode. Hence I will not suggest to install CWM Recovery given in my post in your device until you have official recovery with you or try to find out a compatible CWM Recovery for your device.
Click to expand...
Click to collapse
u mean i shud try CWM recovery of other 4.5 inches qHD phones????
n sir how to enter into recovery of lava iris 455????
Rooted Successfully
kamal882 said:
By this time you may have been updated your LAVA Iris 501 to Jelly Bean 4.1.1
Now it is time to Root your mobile.
Earlier with ICS; Rooting was done with "Root with Restore by Bin4ry v15" but now with Jellybean, this process will not work.
Steps for Rooting:
Download CWM Recovery from link given in my post
I am also giving link for Scatter File in-case you do not have Scatter File
Flash your phone with this CWM Recovery using SP Flash Tool (Process given below)
Download Superuser-3.1.3-arm-signed.zip and su-bin-3.1.1-arm-signed.zip from links given in my post
Copy both files to SD Card
Boot in to Recovery
Select Install zip from sdcard and install Superuser-3.1.3-arm-signed.zip
Donot reboot your phone now and install su-bin-3.1.1-arm-signed.zip
Now reboot your phone
After reboot, phone will take approx. 4 to 5 minute for first boot
Downloads: Links Updated
CWM Recovery
Superuser-3.1.3-arm-signed
su-bin-3.1.1-arm-signed
Scatter File
Click to expand...
Click to collapse
Rooted Successfully. Thanks
kamal882 said:
By this time you may have been updated your LAVA Iris 501 to Jelly Bean 4.1.1
Now it is time to Root your mobile.
Earlier with ICS; Rooting was done with "Root with Restore by Bin4ry v15" but now with Jellybean, this process will not work.
Steps for Rooting:
Download CWM Recovery from link given in my post
I am also giving link for Scatter File in-case you do not have Scatter File
Flash your phone with this CWM Recovery using SP Flash Tool (Process given below)
Download Superuser-3.1.3-arm-signed.zip and su-bin-3.1.1-arm-signed.zip from links given in my post
Copy both files to SD Card
Boot in to Recovery
Select Install zip from sdcard and install Superuser-3.1.3-arm-signed.zip
Donot reboot your phone now and install su-bin-3.1.1-arm-signed.zip
Now reboot your phone
After reboot, phone will take approx. 4 to 5 minute for first boot
Downloads: Links Updated
CWM Recovery
Superuser-3.1.3-arm-signed
su-bin-3.1.1-arm-signed
Scatter File
Click to expand...
Click to collapse
is MTK driver is must for rooting cause i have not driver and plz can u provide me its driver and tell me how its will be install in window 7 32 bit
xeroxguy said:
is MTK driver is must for rooting cause i have not driver and plz can u provide me its driver and tell me how its will be install in window 7 32 bit
Click to expand...
Click to collapse
This method is only for LAVA Iris 501 Jellybean 4.1.1
If you have ICS in your phone then first you need to upgrade the firmware of your mobile to Jellybean.
Detail is given in my post HERE
I have also updated my post and now you can download driver from given link.
To install the driver, you need to right click on each inf files and select install.
Let me know if it works for you.
:laugh::laugh::laugh::laugh::laugh::laugh::laugh:
xeroxguy said:
plz friend if you have some time for me then can u come on gtalk then i can tell u my problem in detail
my id is [email protected]
and m online now hope you come soon
Click to expand...
Click to collapse
Solved, now your phone is rooted.
sir can u say whether this will work for lava iris 454 which is 4.0.4 ???
aakashing said:
sir can u say whether this will work for lava iris 454 which is 4.0.4 ???
Click to expand...
Click to collapse
Steps are same but you need to use CWM Recovery of Iris 454. Will post soon.
Dear Kamalji ,Can you make a video tutorial for how to root lava iris 501 or a tutorial with screenshots.? It will be highly useful for newbies like me .Also can you give the process to Unroot the phone.
Thanks in Advance.
How to boot into recovery in iris 501 ? In galaxy we used to press power+volume up+home button simultaneously but here ,there is no home button.Pls help.
urs_rahul said:
How to boot into recovery in iris 501 ? In galaxy we used to press power+volume up+home button simultaneously but here ,there is no home button.Pls help.
Click to expand...
Click to collapse
Volume up + Power button
Sent from my Lava Iris 501
successfully rooted ...thanks mr.kamal
Related
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Have u tried enter the emergency mode?
Sent from my WT19i using xda premium
ur phone has which cpu??? mence mtk or other??
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Do u have ur mobile model stock rom??
Sent from my Micromax A116 using xda premium
daviyankee said:
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Click to expand...
Click to collapse
Download Stock/ custom rom for XOLO A500 (Search In google or XDA )
Download CWM Recovery
Place Rom in memory card
Remove and install battery press vol up then press power key to get bootloader mode
flash this CWM recovery then flash rom through CWM
A500 Not booting
professor_proton said:
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Click to expand...
Click to collapse
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
sonujain10 said:
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
Click to expand...
Click to collapse
download cwm recovery from here https://www.dropbox.com/s/h3w1doejuh3ecq4/cwm_a500.img
flash using fastboot (bootloader)
reboot to recovery
cwm 6 will be there
flash stock rom
Xolo q500 softbricked
Can Anyone Help me. My Xolo Q500 is softbricked. It is niether booting normally nor booting to recovery menu. I have tried sp flash tools but the stock rom of my phone which i downloaded does not contain any scatter file, probably because it is a Qualcomm based device. Please help me..................
xolo q500 dead after formatted
sir please help me i do have the same problem
xolo q 500 i soft bricked using format while connect in the smart upgared tool
i tried to flash but its ask disk to be formatted i am unaware of it so i mistakenly formatted now the phone is not getting turn on
or in the recovery mode please help or tell me the procedure
Can anyone tell me how to install CWM in Lava Xolo Q1000 running stock JB 4.2.1?
Tried many methods..still not successful
thnx in advance!!
Ported CWM to my Q1000,
Problem Solved
starwire said:
Ported CWM to my Q1000,
Click to expand...
Click to collapse
Please do post the steps..thnx in advance!!
[problem solved] follow my other thread..ty
CWM for XOLO Q1000
[BYou're gonna need SPFlash Tool (v3.1304.0.119 or later) , MTK Droid Tools (or the scatter file) , recovery.img for your phone[/B]
I have the same phone. I've gained root access only. Recovery is stock.
Procedure :
1. Extract SPFlash Tool
2. Extract The recovery.zip file* ( Recovery.img file have repeated extension > recovery.img.img .. rename it to recovery.img
3. Open SPFlash Tool
4. Click on "SCATTER LOADING" and choose MT6589_Android_scatter_emmc.txt file
5. Tick 'Recovery' and click on it to load 'recovery.img'
6. In case ur phone isn't being detected by windows, Install its drivers.
7. Turn USB Debugging on, Switch your phone off, Disconnect USB Cable
8. Hit download! and connect USB Cable and wait for the green signal on SPFlashtool.
Done.
compatibility q1000s
Hello there!!
I have a xolo q1000s and not xolo q1000 (with mtk6589t chipset) so would the following cwm recovery work for me
If not does anyone know where can I find a recovery for Xolo q1000s
Thank you
drv.vyas27 said:
Hello there!!
I have a xolo q1000s and not xolo q1000 (with mtk6589t chipset) so would the following cwm recovery work for me
If not does anyone know where can I find a recovery for Xolo q1000s
Thank you
Click to expand...
Click to collapse
Do not flash things not made for your specific model as they might brick your device
javajohn has ported miui rom for the q1000s you might want to google that, he might have a soution
Hey..
I just wanted to know of anyone has tried the above method?
Been trying to get cwm on my q100p but I've not been successful..
Help will be very appreciated! :fingers-crossed:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Root and CWM for Karbonn Smart A26
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Thank you so much!
Cant find the drivers.... pls help
hey guys. i was also trying to root my Karbonn Smart A26... but m unable to find the drivers for my device. even d karbonn homesite is not displaying the drivers... n due to this, while flashing recovery using SP flash tool, the procedure gets stuck up at searching. Pls help.. thanks in advance...
mtorero4 said:
hey guys. i was also trying to root my Karbonn Smart A26... but m unable to find the drivers for my device. even d karbonn homesite is not displaying the drivers... n due to this, while flashing recovery using SP flash tool, the procedure gets stuck up at searching. Pls help.. thanks in advance...
Click to expand...
Click to collapse
Mediatek VCOM Drivers Check out here : http://forum.xda-developers.com/showthread.php?t=2206421
Important Note: Your phone should be OFF before connecting it to the computer, after pressing Download button in SP Flashtool. OFF means pull out battery and put it in again. This ensures the phone is OFF. If switched OFF phone is connected for charging/usb the phone turns ON; phone is not fully OFF even if nothing is shown on screen. So pull out battery. ONLY If you connect the OFF phone to computer you will be able to detect the device and install Mediatek Vcom drivers as well as use flashtool.
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
I still wonder how you got the recovery image...
My phone is rooted successfully thanks to your help, but I would love to learn more.
team.radiant said:
I still wonder how you got the recovery image...
My phone is rooted successfully thanks to your help, but I would love to learn more.
Click to expand...
Click to collapse
Follow step 7 of the thread I posted before: http://forum.xda-developers.com/showpost.php?p=38337401
In brief :
Generate ROM_ with SP FlashTool
Prepare ROM_ in MTK Droid Root & Tools
Build CWM
USB Drivers
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Can U Please Attach the USB Drivers For Karbon A26
mukesh kitty said:
Can U Please Attach the USB Drivers For Karbon A26
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
help
I flashed cwm but it doesn't reboot to recovery plz help,!!!!!
team.radiant said:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Click to expand...
Click to collapse
hi bro
can u pls anyone share me the original "void.fstab" file of karbonn smart A26 mobile which willl be in system/etc folder...
As i tried swapping for low storage problem,from then it was corupted and now i want to replace it with original file as i havnt backuped it.
---------- Post added at 05:24 PM ---------- Previous post was at 04:39 PM ----------
team.radiant said:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Click to expand...
Click to collapse
hi bro,can u pls give me karbonn a26 vold.fstab orginal file
Custom Recoveries are Here!
Gello! Karbonn A26 Users Here are the Custom Recoveries For Karbonn A26 Ported Be Me...
Includes:-
★Philz
★TWRP
★CWM
★Carliv
★Cannibal
etc...
Please Press Thanks If this Post Helped!
Here is the Download Link To The Thread :- :good:
★http://forum.xda-developers.com/android/development/karbonn-a26-custom-recoveries-t2828608★
Try VROOT
VROOT works with this device...
VROOT is very good software !!!!
download from my signature
:good::good::good::good::good::good:
How to install recovery.img ?
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Hello Friend, can you tel me how to install recovery image that you have generated?
How to increase incoming call volume in custom rom lollipop in karbonn a26
Dear All,
I have installed custom ROM lollipop in my karbonn A26.
but incoming ring volume is very low so please help me how to increase volume with Es file explorer or terminal command.
Xperia Rom
Pakistan Baseband
Note: do backup before flash.......
1.Place it in sd card
2.wipe data reset
3.flash rom
4.flash pakistan baseband zip
5. enjoy..........
Camera Autofocus Fix
-Download libcameracustom.zip from attachements
-extract it and copy to system/lib/[here]
-flash modified rom
No bugs so far.......
Credits also goes to incpak as i have just ported it they made it....
Don't forget to click thanks button
Post a link to the original site from where you got this. Secondly add more information about the ROM you have not described the ROM in any way. Also post screenshots of it.
Regards,
RaHBeR
i have ported this from incpak noir a20 rom....
For more info and screenshots go to this site
http://www.incpak.com/tech/xperia-rom-qmobile-noir-a500/
hamsam said:
i have ported this from incpak noir a20 rom....
For more info and screenshots go to this site
http://www.incpak.com/tech/xperia-rom-qmobile-noir-a500/
Click to expand...
Click to collapse
You have ported this? That is you have changed this ROM?
Then give details of all the changes in this ROM that you made and also the differences between this ROM and the Stock ROM.
These all data along with screenshots should be in your first post.
Regards,
RaHBeR
Screen shot added..............
camera resolution problem...
Oops ,, deleted
xedi95 said:
Oops ,, deleted
Click to expand...
Click to collapse
???
Nice Work!
The file size is tooo big! +400MB well anyways i will definitely try it and share my views regarding this ROM!
more details should be added regarding the ROM! :angel:
Works on Walton Primo G3??
esarve said:
Works on Walton Primo G3??
Click to expand...
Click to collapse
it will work just replace boot.img with stock one as this user did on this page post 1
http://forum.xda-developers.com/showthread.php?t=2475234&page=2
hamsam said:
it will work just replace boot.img with stock one as this user did on this page post 1
http://forum.xda-developers.com/showthread.php?t=2475234&page=2
Click to expand...
Click to collapse
YEah i tried yesterday it worked
I flashed this rom today, but badly stuck. help
hamsam said:
Xperia Rom
Pakistan Baseband
Note: do backup before flash.......
1.Place it in sd card
2.wipe data reset
3.flash rom
4.flash pakistan baseband zip
5. enjoy..........
Camera Autofocus Fix
-Download libcameracustom.zip from attachements
-extract it and copy to system/lib/[here]
-flash modified rom
No bugs so far.......
Credits also goes to incpak as i have just ported it they made it....
Don't forget to click thanks button
Click to expand...
Click to collapse
I flashed this rom on qmobile a500 of my friend, flashed successfully, rebooted without letting me do three wipes of cache dalvik and factory. Mobile rebooted but fc on intial boot setup and I can not get past to it, thid is not it, but the worst of all is that I can not boot into cwm
Recovery to flash any other rom... initial setup app doesnot close by any means.. I can pull now notification bar, have to settings..
Please help... please help. Guide my another rom or help me boot into recovery.. one more thing does qmobile a500 support twrp recovery... becaise I manage to install flashify app from play store somehow... this app let's me flash rom by using twrp recovery... waiting for some ecpertly reply very badly.....
affineer said:
I flashed this rom on qmobile a500 of my friend, flashed successfully, rebooted without letting me do three wipes of cache dalvik and factory. Mobile rebooted but fc on intial boot setup and I can not get past to it, thid is not it, but the worst of all is that I can not boot into cwm
Recovery to flash any other rom... initial setup app doesnot close by any means.. I can pull now notification bar, have to settings..
Please help... please help. Guide my another rom or help me boot into recovery.. one more thing does qmobile a500 support twrp recovery... becaise I manage to install flashify app from play store somehow... this app let's me flash rom by using twrp recovery... waiting for some ecpertly reply very badly.....
Click to expand...
Click to collapse
Install mobile uncle tool and download cwm recovery from incpak.com for a500..place recovery on root of sd card and flash it through mobile uncle tools....
Sent from my A500 using Tapatalk
tried but device could not to recovery
hamsam said:
Install mobile uncle tool and download cwm recovery from incpak.com for a500..place recovery on root of sd card and flash it through mobile uncle tools....
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
installled mobile uncle and flashed said recovery from incpak, after installing recovery mobile uncle prompted me to reboot, i chose yes. but failed to boot into recovery, then it mobile booted normally..
so i tried to install stock a500 recovery... it is stuck at bootloop... only q mobile boot animation not normal boot, no recovery....
i tried to install bootimg using sp flash tool but gave error 8032... i have installed vcom usb drivers correctly......... please help
sp flash working now..
affineer said:
installled mobile uncle and flashed said recovery from incpak, after installing recovery mobile uncle prompted me to reboot, i chose yes. but failed to boot into recovery, then it mobile booted normally..
so i tried to install stock a500 recovery... it is stuck at bootloop... only q mobile boot animation not normal boot, no recovery....
i tried to install bootimg using sp flash tool but gave error 8032... i have installed vcom usb drivers correctly......... please help
Click to expand...
Click to collapse
recovery flashed but not booting to recovery nor normally... qmobile official logo all time long................ help.
maybe recovery is bad, can you provide working recovery img file. thanks
affineer said:
recovery flashed but not booting to recovery nor normally... qmobile official logo all time long................ help.
maybe recovery is bad, can you provide working recovery img file. thanks
Click to expand...
Click to collapse
If Rom not booting also did recovery then read this post
http://www.incpak.net/showthread.php?p=556
Sent from my A500 using Tapatalk
perfomed format whole flash, now black screen
hamsam said:
If Rom not booting also did recovery then read this post
http://www.incpak.net/showthread.php?p=556
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
after performing format whole flash, i flashed bootimg and recovery supplied in a,zip.. nothing on screen now. sp flash reported success in flashing recovery and bootimg..
what else?
please help and skype
affineer said:
after performing format whole flash, i flashed bootimg and recovery supplied in a,zip.. nothing on screen now. sp flash reported success in flashing recovery and bootimg..
what else?
Click to expand...
Click to collapse
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
affineer said:
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
Click to expand...
Click to collapse
if you have formated whole flash u need to flash every thing provided in zip including preloader....Your device will boot i have tried this procedure many time and successfully booted device every time.Also one more thing choose this as scatter file "MT6589_Android_scatter_emmc_PMT.txt" and don't forget to choose and tick nvram or any other thing provided in zip...
affineer said:
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
Click to expand...
Click to collapse
f you have formated whole flash u need to flash every thing provided in zip including preloader....Your device will boot i have tried this procedure many time and successfully booted device every time.Also one more thing choose this as scatter file "MT6589_Android_scatter_emmc_PMT.txt" and don't forget to choose and tick nvram or any other thing provided in zip...
Hello,
My Mobile name is Micromax Bolt A69 It's Chipset Broadcom. I want to use custom rom into my mobile .. so, i need backup first but i didn't find any cwm recovery img online please anyone can give a cwm recovery for Micromax Bolt A69..or any please port a cwm recovery img. it's urgent please help ... I'll thankful to you if can do it...
Micromax A69
Sir my mmxa69 its recovery mode is deleted my me by mistake, plzz help me sir. Plz send me any recovery mode of this model. Plzzzzzz help sir i m in a very bad condition
Hi there.....please help me...I by my mistake deleted my micromax a69's recovery......How to get it back?
Any recovery will work....thanks....my email [email protected]
My device is rooted.....
Hi, If you lose your stock recovery & boot img don't worry.. i have both imgs in my cloud storage dropbox account download zip file:
http://bit.ly/1WRGe5g
How to flash stock recovery for Micromax A69 Bolt:
Follow Step by Step:
- Download zip file
- Download "Flashify" app by Google Play or Google it.
- Now extract zip file and install "Flashify"
- Open Flashify and root permission it.
- Now Select Flash Tab to Recovery image
- Click Chose Path Find it "Recovery.img" where you extracted
- Final step: hit flash button!
Now it will be rebooting to stock recovery!! if it show stock recovery then that mean you have successfully flash stock recovery..
If you any problem facing inbox me or contact.txt to find my information thanks
link is not correct