TWRP recovery for Panasonic T44
TWRP for Panasonic T44 ported from TWRP 3.1.1-0-AMD.Team™(MT6580 Kernel:3.18.19). There may be some bug but I do most of the work.
I am not responding if any wrong happen with your device.
2 method to install TWRP recovery :
> Install through ADB.
(You will need to unlock bootloader)
> Install through SP Flash tool.
Download TWRP 3.1.1 here :good:
Want to root?
Download SuperSU and flash it.
Its not working! Its booting into normal recovery that comes with the phone
Bro it's really nice initiative I have been waiting this for two years.
Related
hello when i open the bootloader on motog install cwm recovery and now always boot cwm recovery pls help
and can i replace ?
of course you can replace it. what do you want on it? TWRP or philz . you can flash either if you don;t want CWM. :good:
thanks now using official firmware i have root acess and the bootloader is unlocked have twrp just how to install langues hun?
********Root twrp Symphony P6 Pro*************
i just found twrp Recovery for Symphony p6 pro, follow instruction correctly and Do Always on own Risk,
hit thanks If this helpful For you,
Instructions-
Download recovery img From below
Run Sp Flash tool load Scatter From recovery folder
Check recovery only load twrp and then flash
without pc-
Root via kingroot [yes working tested]
Download flashify apk from playstore
backup stock recovery and boot.img
load twrp.img click flash Done,
Rooting via twrp-
flash update supersu.zip through twrp
Done.
Downloads-
Here
Hi....
I was on Chinese Firmware.
I was unlocked bootloader of m2 note.
Then i install twrp recovery( I created backup through twrp recovery ).
Then Flash LineageOS ROM.
Then i restore ( chinese firmware ) from twrp.
I found stock recovery of flyme 5 and I flashed this from Rashr.
Then i try to re-flash same chinese firmware(like normal update from update.zip from file manager).
it successfully upgraded(shown in phone screen), but not booted.
when i try to connect phone to pc, it connect and dis-connect automatically after 1-2 seconds.
i can't flash anything..(when i try to flash recovery, it downloaded in sp flash tool, but not flashed bcoz phone is disconnected.):crying::crying:
if anyone know the solution, plzzz tell me....
Hi,
I'm using LG G3 AT&T (D850). When I bought it, It had Philz recovery already installed but Philz recovery installed is of LG G3 VS985. I want to flash Lineage OS but I can't because Philz recovey gives me an error saying: "This Zip is for device D850 and you're using VS985".
I tried to installed TWRP by using PC and also by using Flashify. There was no problem in installation but When I try to boot into recovery, There's nothing except black screen and Red blue Flashing led lights(Notification lights).
When I flash VS985 Philz recovery into my phone, The recovery works. And The CWM app is showing that I have two recoveries installed namely CWM and TWRP.
Please help
AbdulSammad said:
Hi,
I'm using LG G3 AT&T (D850). When I bought it, It had Philz recovery already installed but Philz recovery installed is of LG G3 VS985. I want to flash Lineage OS but I can't because Philz recovey gives me an error saying: "This Zip is for device D850 and you're using VS985".
I tried to installed TWRP by using PC and also by using Flashify. There was no problem in installation but When I try to boot into recovery, There's nothing except black screen and Red blue Flashing led lights(Notification lights).
When I flash VS985 Philz recovery into my phone, The recovery works. And The CWM app is showing that I have two recoveries installed namely CWM and TWRP.
Please help
Click to expand...
Click to collapse
Actually You Have Broken Your Phone's Recovery . Your Phone's Bootloader Was Locked And You Flashed A Bumped Image By Flashify .
.
You can install through flashify only on kitkat and you need to flash a bumped recovery image .
On Lollipop , you cannot flash a bumped recovery directly by flashify . You need to flash it through pc by IMAGPREP tool which can also brick your phone if used stupidly .
.
So , my advice is to go back and flash the stock kitkat firmware through lg flash tool .
after that you can easily root your phone and install a bumped recovery by flashify .
If You Want To Flash bumped Philz Recovery ,
Then this is the only thread in xda https://forum.xda-developers.com/att-lg-g3/development/recovery-cwm-philz-touch-6-advanced-t3632940
If you want to flash bumped twrp , then visit https://dl.twrp.me/d850/
I am on kitkat
Mansoor4139 said:
Actually You Have Broken Your Phone's Recovery . Your Phone's Bootloader Was Locked And You Flashed A Bumped Image By Flashify .
.
You can install through flashify only on kitkat and you need to flash a bumped recovery image .
On Lollipop , you cannot flash a bumped recovery directly by flashify . You need to flash it through pc by IMAGPREP tool which can also brick your phone if used stupidly .
.
So , my advice is to go back and flash the stock kitkat firmware through lg flash tool .
after that you can easily root your phone and install a bumped recovery by flashify .
If You Want To Flash bumped Philz Recovery ,
Then this is the only thread in xda https://forum.xda-developers.com/att-lg-g3/development/recovery-cwm-philz-touch-6-advanced-t3632940
If you want to flash bumped twrp , then visit https://dl.twrp.me/d850/
Click to expand...
Click to collapse
I'm on kitkat
Hi there!
Because lack of the development at this device. I try to make a little work for this infamous device.
This is a custom recovery for Infinix Zero 4 based on PhilZ Touch Recovery version 6.59.0. You can use this recovery to flash custom ROMs, root using Magisk or SuperSU and other flashable ZIPs.
[Really] Important - read before flashing
I am not responsible for anything that goes wrong. You are agreed to flash this recovery that will break XOS OTA update, lose warranty and may break your device.
However, I've included stock recovery if you change your mind and want to back to original one.
Instructions:
1. Go to Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Install MTK Preloader USB driver, skip if you've already installed this one.
4. Extract PhilZ recovery zip file, and extract
5. Turn off your device.
6. Open SP Flash Tools, locate scatter file to your downloaded zip recovery.
7. Click download, and press VOL DOWN on your device.
8. Turn on your device, press POWER and VOL UP.
9. Your custom recovery has been installed.
Back To Stock
If you decided change your mind by restore stock recovery for reasons such as want to keep your warranty, continue receive OTA update and maybe want to be back on the track, I've also provided stock recovery both Nougat and Marshmallow version.
Download links
PhilZ Touch Recovery
SP Flash Tools
MTK Preloader USB Driver
Stock Recovery (Marshmallow version)
Stock Recovery (Nougat version)
Credit and Thanks
Credit to @Phil3759 for awesome custom recovery
Thanks to Infinix, Mediatek, and you
Reserved
Reserved
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
dayat7man said:
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
Click to expand...
Click to collapse
because the boot isn't patched. you can use Magisk to patch your boot.img and flash it again and it will work.
you can get your boot.img either from your stock ROM where is available at infinixmobility.com or you can use miracle box to extract it from your current installed ROM