[Q&A] [TOOL] MotoTool AIO(GPE,NON-GPE)Root,Recovery,Record,Relock,Backup-Restore App
Q&A for [TOOL] MotoTool AIO(GPE,NON-GPE)Root,Recovery,Record,Relock,Backup-Restore Apps[v3.1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL] MotoTool AIO(GPE,NON-GPE)Root,Recovery,Record,Relock,Backup-Restore Apps[v3.1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
alonsoch said:
ISSUES
Code:
*None, waiting for one..
CHANGELOG
Code:
09/03/14
*Size of the tool now is approx 55 mb
*GUI updated
*Added the function for download recovery
*Added SysTab
*New Code
23/02/14
*Added the function to relock the bootloader(status code:2)(only tested on native GPE)
21/02/14
*Updated TWRP for NON-GPE devices (2.6.3.2, touch is fixed thanks to @dhacker29)
*Updated CWM Advanced Edition for NON-GPE devices(6.13.9)
*Updated CWM Advanced Edition for GPE devices(6.13.9)
*Added CWM Swipe(6.0.4.7, thanks to @dhacker29)
16/02/14
*Updated Ui for the panel drag and drop(install .apk)
*REMOVED restore function for NON-GPE firmware, sorry for this guys.. :(
15/02/14
*Backup your non-system apps
*Restore your non-system apps
*Record screen(change bit-rate, duration, name , etc)
*Install any .apk using drag and drop
12/02/14
*Fixed Restore Function on NON-GPE... all should work perfect..
10/02/14
*Added [CWM Advanced Edition] PhilZ Touch for KitKat
*Added [CWM Advanced Edition] PhilZ Touch for GPE
* Added CWM 6.0.4.6 for KitKat
*Added TWRP 2.6.3.1
*Added CWM and TWRP for JellyBean
*Added CWM 6.0.4.6 for GPE
*Added SuperSu 1.93
GPE FIRMWARE
Code:
[COLOR="Red"]REMEMBER EXTRACT YOUR FIRMWARE AND COPY ALL THE FILES TO GpeImage/ [/COLOR]
[URL]https://mega.co.nz/#!3dZB1YAR!Yd6J9Yg_rtSgSpAY8_ZyKJXtweiCzhkevlvKwnEfFN0[/URL]
Any mirror is welcome :D
HOW RESTORE MY DEVICE TO NON-GPE FIRMWARE
Code:
Well, i have removed this function for my tool because the new firmwares don't include the .bat file, so if you want restore your device please go to this thread
[URL="http://forum.xda-developers.com/showthread.php?t=2542219"]Restore NON-GPE firmware[/URL]
Q&A
-Why i don't have signal when i convert to GPE?
Well this is a know issue to fix it flash your stock fsg, don't know how? don't worry.. copy your stock fsg and put it in the tool folder, then press shift+right click and select open window promp here and paste the next code one by one:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
-I have done the previous steep and continue without signal!!
well, please go to this thread and flash your respective radio via recovery Flash radio using recovery
-Why i can't boot to recovery?
Remember in fastboot mode VolUp SELECT and VolDown SCROLL
-Why i can't install an apk using your tool?
Well, be sure that the apk name don't have spaces, and check if the path of your apk have spaces too... i suggest that: rename your apk (simpler name) EX. xxxxxx.apk (where xxxxx are the name) and move your apk to the desktop, then try again..
-How can i say thank you?
Just press the THANKS BUTTON
Click to expand...
Click to collapse
Would it be possible to use mototool to convert a moto g running Paranoid Android to GPe?
I have flash stock recovery for kitkat on my moto g dual sim asian retail, and some thing hapen. When i go to recovery mode its say "no command" with a green android picture.
Can you tell me whats going on my device? I cant acces my stock recovery.
May be some one can help me with this situation, thx before for your help
ficki yahya said:
I have flash stock recovery for kitkat on my moto g dual sim asian retail, and some thing hapen. When i go to recovery mode its say "no command" with a green android picture.
Can you tell me whats going on my device? I cant acces my stock recovery.
May be some one can help me with this situation, thx before for your help
Click to expand...
Click to collapse
That is the stock recovery, just a green android
And Lollipop?
Will this be updated for flashing Lollipop?
HappyNacho said:
Will this be updated for flashing Lollipop?
Click to expand...
Click to collapse
yes!
I converted to GPe (My moto G was normal) months ago WITH THIS TOOL. All great.
Then flash Aero Kernel. Now I want to go back to the GPe converted stock kernel. So I can received the update when It comes to out.
Where can I get this GPe converted kernel? How can I flash it?
Recovery Flash not working
Whenever I try loading my custom recovery after flashing, I get a black screen! Halppp
YungAndroidUsar said:
Whenever I try loading my custom recovery after flashing, I get a black screen! Halppp
Click to expand...
Click to collapse
try flashing it via fastboot. You will find the recovery MotoToll All in one/Data/KitKat
you only need to enter fastboot and type on a cmd fastboot flash recovery file.img
Hi su,
i also tried to Convert my XT1039 to GPE, with the same error, but apparently it worked anyway, since after that the regular start screen showed and the LED flashed white on starting the device.
But i was still stuck in the same bootloop as you.
I then flashed a complete 4.4.4 Retail .zip piece by piece via fastboot.exe according to the instructions in this thread: http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619. Then the phone finally worked
Good luck,
Grey_haze
Obsolete
Please tell me if I can use both SIM cards in XT1033 after I convert it to GPe
I'm completely new to Android and Flashing ROM.
I search a lot on web but did not find a perfect answer.
Could anyone please tell if I can use both Sim cards in XT1033 after I convert it to google play edition?
I need both sim cards for my day to day calling
Thanks in advance!!
I'm trying to use MotoTool AIO...
X.Mad.Max.X said:
I'm completely new to Android and Flashing ROM.
I search a lot on web but did not find a perfect answer.
Could anyone please tell if I can use both Sim cards in XT1033 after I convert it to google play edition?
I need both sim cards for my day to day calling
Thanks in advance!!
I'm trying to use MotoTool AIO...
Click to expand...
Click to collapse
We can use only one sim.
The reason why I would like to change it to Gpe, is because MotoCare, Assist, Alert etc apps from Motorola just consume a lot of battery. I tried to remove these apps but I can't completely remove them.
I need some help with the Moto tool:
1. What is recovery? (Flash stock recovery, fastboot etc., what and when we should use these?)
2. What is Stock recovery? (I'm using KitKat 4.4.4, can I use original google kitkat without Motorola applications?)
3. Can someone provide a link to understand the basics of Android firmware flashing?
I'm a computer engineer and worked on vc++ but I'm completely new to Android
Thanks in advance!
Can I use mototool for GPE 4.4.4? Or has it to be 4.4.2 as the description provided that version.
I had some problem flashing to GPE 444 from Cyanogen 11. It asked for a password to decrypt my phone.
So I flashed it to motorola stock 444, lucky for me it worked.
Has anyone had any luck converting their XT1045 to a stock GPE ROM? During the flashing I get errors "hab check failed for boot" and "hab check failed for recovery" then a boot loop at the unlocked GPE boot screen.
can this be used for lollipop
will this tool work for lollipop 5.0.2
Help!
I tried 'Flash stock recovery' but in the phone it says partition size mismatch.And fails.Help! :/
I have a second Moto G (2013 version). Could I convert that one into a GPE edition and then receive lollipop OTA update? I think the OTA update is out since like a couple months for the GPE version. Any ideas? Also thanks a lot for this, it's a great tool!
Hi,
I want to root an XT1045. ¿Will this tool work with (XT1045) or only in 102X and 103X versions?
Thanks.
Can i root my moto g xt1033 with lollipop 5.0.2 with this tool ?
Thanks a lot!
Q&A for [ROM] 4.4.2 GPE, philz recovery, fixed logo, easy for noobs and no noobs
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] 4.4.2 GPE, philz recovery, fixed logo, easy for noobs and no noobs. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
maurocds said:
http://youtu.be/faSg3puGssQ
download
http://www.mediafire.com/download/3..._recovery_6.13.19,_root,_drivers,_logo_fix.7z
basically this is a one click solution to flash a moto g into GPE, with a custom recovery, and boot logo fixed with every file included
hi, i just made this pack, in order to get an easy GPE rom with fixed logo and philz recovery with everything included for the flash ib 1 click, i just compiled some things so it can be easier for noobs and even no noobs to save time
the original idea came from this:
http://forum.xda-developers.com/showthread.php?t=2646404, but i wanted to add a custom recovery, logo fixed for unlocked devices, and have it all ready in a single package
features:
-4.4.2 rom GPE xt1032 stock
-adb files
-philz recovery falcon gpe philz_touch_6.13.9-falcon_gpe, you can replace the recovery for any other you want (using the same name for recovery) (i 100% recommend to use this included) warning read the last part of post
-supersu compatible with the philz recovery included for root (newer philz recovery does not work in gpe, also newer supersu cannot be flashed in the included recovery, you have to use this 2 versions included, trust me, later you still can update supersu)
-motorola drivers included, MotorolaDeviceManager_2.4.5
-logo fixed for unlocked devices (normal logo without the dumb unlocked blablabla info)
usage:
1)you need a moto g 1032xt with UNLOCKED BOOTLOADER, yes i mean you can use a stock moto g with motorola rom 4.4.2 or even a moto g GPE 4.4.2 if you want to restore the firmware as long as they are 1032xt, i don´t know about other models, my moto G are from amazon USA unlocked global gsm xt1032 16gb, if you are on 4.3 please update to oficial motorola rom 4.4.2, then you can use this
2)you need to install motorola drivers, included MotorolaDeviceManager_2.4.5, connect the phone on and let windows setup drivers, then off, then in bootloader in order to install drivers, if you don´t know what bootloader is, then please get out (ok noobs, bootloader is when the phone is off, press power + vol down for 3 secs and release, that is the bootloader)
3)after drivers, connect the phone in bootloader screen
4)execute in the PC GPE_XT1032_KOT49H.M004_CFC
5)wait............there are some purple lines of text like warnings, ignore them, don´t worry it is normal, wait until the end, unplug and press normal powerup or reboot the phone
6)phone should start into android welcome screen
optional (root)
7)in welcome screen or any other time, plug the phone and copy supersu into phone memory, power off the phone
8)boot into bootloader again, go to recovery, flash supersu (install zip, choose zip from sd card, select supersu.zip, yes install supersu.zip, wait some......................., press any key, reboot system now), restart, download supersu from playstore, done, you are root
WARNING about OTAs updates
no matter what firmware you use, if you have custom recovery, do not update the phone via OTA, i repeat DO NOT UPDATE
flash a stock recovery, then update via OTA, else the phone will be in a boot loop
thanks
dashiell.cano, for discovering that way of flash
Phil3759, for custom recovery
alonsoch, for moto g tool
Click to expand...
Click to collapse
can it be flashed on xt1033 running cm11?
being_sahil said:
can it be flashed on xt1033 running cm11?
Click to expand...
Click to collapse
i dont know
i have xt1032
Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Hi,
Thanks for using XDA Assist Please Standby when we move your post here Moto G Help and Troubleshooting
Good Luck!
Did you try manually flashing each partition using fastboot commands?
answer
jacobjake said:
Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Click to expand...
Click to collapse
go on youtube type in how to adb sideload a rom on moto g that video will fix your problem well it did for me GoodLuck
Is recovery installed? Are the Moto drivers installed on your pc?
I've been through something similar before and whenever I accidentally wipe the OS, I just connect then flash another rom usually starting from here http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 and it will pop up under "my computer" where you can copy and try to flash your rom again. I assume it's the same with 5.0+ (I'm still on 4.4)
Which method did you use to flash lollipop?
Hello people,
Could anyone of you please let me know the procedure to install MultiROM on my MOTO G 2nd Gen. I am on stock ROM, Steller kernel 4.1 it support Kexec hardboot. But I don't know how to install the MultiROM.
I have tried from to follow the steps from a video on youtube by vidhant bafna, but I don't have access to TWRP folder, I have tried many file browsers (root access) still Iam unable to add theme folder under TWRP, it says can't add. so I cannot install through that method. IF there is any otherway to install MultiROM, please help.
Your Response is very much appreciated.
Thanks in advance.
Check this out... Mate...
http://forum.xda-developers.com/moto-g-2014/development/mod-multirom-v31-t3045290
Hope this helps
It gives me
Code:
error: cannot load 'twrpp.img'
name is correct. When using mfastboot it gives error about 256 MB or something like this. I downgraded to stock Moto G 2nd Gen XT1068 firmware, then ota update. I tried to root with Kango Root but still not work. Should I downgrade and try to root from KitKat? I can flash the stock recovery, but not a custom one.
Hi there,
All you need is in this threads:
G 2014 General -> [INDEX] Start here....
[WINDOWS TOOL][ROM][Lollipop][5.0.2][XT1068] Stock Android 5.0.2 Easy Installer
For more questions please use this forum: G 2014 Q&A, Help & Troubleshooting
Good luck