THIS PROJECT IS NO LONGER SUPPORTED.
UPDATED 27/04/2017 Content written in RED...... NEW UPDATE 24/3/2018 CONTENT WRITTEN IN BLUE
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
24/3/2018: Miui8 Added. Flash and Go as usual. No NVRAM fix needed (at least i didn't need to flash it,you might have to if you get the nvram error in wifi).
-BUG: You have to manually set IP, dont let it do it automatically DHCP is broken in this build
***Please tell me any extra info as i haven't fully tested it out yet***
24/3/2018: Lineage OS (6.0.1): same as always with 6.0.1 aosp builds, Flash, Dont reboot and install nvram fix. then reboot and your good to go. Might need Gapps in this build.
24/3/2018: !!!THE BIG UPDATE TO NOUGAT!!!!
-Resurrection Remix Nougat:
Install as usual, no Nvram fix is needed this time around.
Download and install gapps 7.0.1 pico or what ever version you like.
If you have a SD-card inserted a warning will pop up, if you have files on there remove them before flashing the rom. After you have saved your files format it as internal and you will be good to go.
*ALSO KERNEL SOURCES ARE NOW AVAILABLE*
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***
Reserved
Links are now live and ready! Removed country lock from firmware so it can be installed on any Vodafone Smart Tab 4 in any country and on any *Service.
*Haven't been able to find a tester.
Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?
lintronics said:
Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?
Click to expand...
Click to collapse
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%
Brilliant. Took a bit of trial and error since I've not worked with this tool before but got my tablet updated to 4.4.2 at last. Thanks so much for putting this together, I really thought I'd be stuck on 4.2. Just gotta figure out how to root now, that doesn't seem to be working.
How to find exact model of my Vodafone Smart Tab 4 ?
Can i flash this on my iusacell alcatel pop 8 p320a? I need kitkat
Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help
Artur1993 said:
Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help
Click to expand...
Click to collapse
Just change the file extension to Zip
---------- Post added at 03:00 AM ---------- Previous post was at 02:58 AM ----------
Valkiry said:
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%
Click to expand...
Click to collapse
Does this allow the Tab to make and receive calls over GSM? Is this unbranded firmware not Vodafone firmware?
You need root access to install custom recovery via adb in fastboot, so you mean get root, install recovery then remove SU before flashing?
Okay so the first dump (4.2.2) is stock firmware from Hungary Vodafone used by mtktools to flash, please not this does not have super user so your device is allowed to update to the 4.4.2 file.
Second file is an update to 4.4.2 for those that missed out on the OTA release because they had root.
Third file is a custom debloated 4.4.2 flashable through CWM.
Never install SU on hungary 4.2.2 firmware as you will never get to upgrade to 4.4.2 firmware.
Updated with new files please check post #1
Gapps on RR v5.7.4 is now fully functional. Enjoy please dont Forget to hit that Thanks button!
New RR 5.7.4 Update:
THIS IS A TWRP RESTORE METHOD!
Replace DATA.* and SYSTEM.* files in one of your own backups of RR5.7.4!
Updated SU to 2.79
Busybox Updated
Gapps Installed
DivineBeats V9 installed
Please note there will be alot of missing apps as i needed to make room in system partition for this. There will be no call functionality, or messaging functionality. Also music player app is gone along with YGPS and Adaway. Let me know how you guys go
Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).
Where is the Scatter File for MT8382?
Cookiestalker said:
Where is the Scatter File for MT8382?
Click to expand...
Click to collapse
There is no scatter file for MT8382. Vodafone changed it to lock people out of backing up. The original scatter file provided is the real device code. Why are you asking for MT8382?
przenczo said:
Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).
Click to expand...
Click to collapse
Extract the files and re-ZIP it as a zip file. I made a mistake. It won't affect install
Valkiry said:
UPDATED 27/04/2017 Content written in RED
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***
Click to expand...
Click to collapse
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy
bussi2010 said:
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy
Click to expand...
Click to collapse
Glad I could help you out dude! There is 7.1 floating around but it's not very good and I don't use this device much anymore. If I do end up doing it ill post it here. Don't forget to hit tthat thanks button
Hi, recently I've been tweaking out my Nexus 5 and used MultiROM to install CyanogenMod 13 as my secondary system alongside Android 6.0.1 but I have a question: How can I install GApps for CyanogenMod 13 only but not for Android 6.0.1 from my MultiROM recovery?
Matrixians 14 said:
Hi, recently I've been tweaking out my Nexus 5 and used MultiROM to install CyanogenMod 13 as my secondary system alongside Android 6.0.1 but I have a question: How can I install GApps for CyanogenMod 13 only but not for Android 6.0.1 from my MultiROM recovery?
Click to expand...
Click to collapse
Hi, its pretty simple,
1. Boot into your TWRP MultitROM Recovery
2. When your booted up the TWRP MultitROM Recovery go to "Advanced"
3. Now you will see in the Advanced menu the option "MultiROM"
4. Go to "MultiROM" and then to "List ROMs"
5. Now you will see all your secondary ROMs, click on the one you want to flash a ZIP for
6. Now you will see a lot of options, you need the "Flash ZIP" option, click on that option and locate to the ZIP you want to flash.
7. Now the flashing process will be just like normal, Swipe to Confirm Flash and it will just flash the ZIP on your secondary ROM like is does on your internal ROM.
I hope this is enough info for you, good luck! :good:
Hello everyone. I have come up with a lazy way to install custom ROM (such as Cyanogenmod) in *most* phone (I tried this on S3mini and Galaxy MEGA). Please note that this method moght not work on your phone and I am not responsible for bricking your phone.
Things you need:
-Your phone, fully charged
-Your precious time (About 30-60minutes)
-One click root app (I use Kingroot, download it with apk) (You may use other apps, of course)
-TWRP manager from playstore
-ZIP file of TWRP in latest version (V3?)
-ZIP file of the custom ROM matching the version of your device
-ZIP file of GApps matching the version of the custom ROM (Google for gapps and download it)
Steps:
1. Backup your personal information
Copy your personal information such as music, photo, documents out of your phone (e.g.: Cloud drive, USB, SD card). Safety first.
2. Root your phone
Download Kingroot and install the apk with package installer. Run the app and follow the instruction in the app to root.
3. Install TWRP manager
After rooting, install TWRP manager. In the app, install TWRP that match your device.
4. Create a backup for your phone
Boot your phone into recovery (Every phone have different method, so please google about this). In TWRP, press 'Backup' to create the backup.
5. Flash the latest version of TWRP
As the TWRP manager does not offer the latest version of TWRP, you have to flash the latest version by installing ZIP. The latest version of TWRP can install ROM with higher success rate.
To do this, press 'Install' in TWRP. Find the ZIP file of TWRP in latest version and install it.
6. Reboot your device to Recovery mode
7. Wipe your device
In TWRP, press 'Wipe'. Select Cache, Dalvik Cache, System and Data partition and wipe them.
8. Flash custom ROM
In TWRP, press 'Install'. Select the Custom ROM ZIP and install it.
9. Flash GApps
Most custom ROM does not have Google apps such as play stote, so you have to install it.
In TWRP, press 'Install'. Select the GApps ZIP and install it.
10. Wipe Cache and dalvik cache
In TWRP, press 'Wipe'. Select Cache and Dalvik Cache partition and wipe them.
11. Reboot your device
Now the ROM should be properly installed. First boot might take longer, so please wait patiently.
Shall you brick your phone, try to recover by using backup created in step 4.
PS: I am a newbie here and this is my first guide
While you have to wipe your device to flash the custom rom, it will wipe your data, including the actual Gapps and rom. This shows that your method won't work.
A sure shot tutorial
If you don't use as said, or skipped any steps,then it won't work.
Wipe everything (backup your data first)
Install ycjeson recovery
Install stock 19s (provided by leeco, none else)
Change recovery to official (risabhs)
Boot into system and setup
Install multirom
Tick both recovery and multitrom zip
Click install
It will ask for permission give them
It will ask for reboot
Select ok
It will boot into recovery
And give some error - ignore it
Go to 3dots - multirom options in recovery
Select inject boot.img (it should install without any error)
Then install any Rom you want
After that you will have room selection option in boot menu
Imp:
If it doesn't work reasons
You haven't followed instructions
Files you installed are corrupted
You messed your phone with different bootloader and names
This is working and will work?
I'm not the developer. Don't forget to give the proper credits to the developer.
Credits:
Rishabh Rao.
Jignesh jain.
How to use MultiRom video:
Your 18th Line in This Post
"Inject boot.img"
I am confused with this statement..
Which boot.img we have to inject or do we have to click on boot sector??!
multyrom only whit an original rooted firmwhare ? no possibility of use two firmwhare(CM and lineage?)
I am on Nougat RR rom, trying to install multirom. by installing multirom apk app . it does not download Multirom and multirom recovery..
Xiaomi mi4c easy root and Twrp install For not found open bootloader !!! My operational guidance :good:
1. Run Twrp Swipe fastory reset install Supersu 2.78 for binary update and Install Android 5.1 miuios rom end Swipe Dalvik / Art Cache Cache and reboot to run the phone and test app from Market Root Checker.
2. Run Twrp Swipe fastory reset and install twrp Android 5.1 Swipe Dalvik / Art Cache Cache and reboot
Run a test phone app Ndr utils
3. unpack Twrp libra for Android 7 image instalation.
4. Swipe Dalvik / Art Cache and Cache and install image twrp for Android 7 and next install Android 7 rom reboot
Google Play install apk official Twrp App and install image Twrp pro Android 7 again
Entry into TWRP over apk Ndr Utils
link Twrp : https://www.androidfilehost.com/?fid=457095661767135741[/url]
link Super su : https://download.chainfire.eu/1003/SuperSU/SR1-SuperSU-v2.78-SR1-20160915123031.zip
Please follow the procedure and you will be surprised
?????
Detail please
I just gotta break it down into the steps I get :
First step:
- go to TWRP and do factory reset
- Flash supersu zip file in the link
- Flash MIUI OS 5.1 and wipe dalvik&cache
- Reboot then check for root with installing root checker app
Second step:
- Go back to TWRP and do another factory reset
- flash TWRP for OS 5.1 zip file and wipe dalvik&cache
- reboot then install NDR Utils and run a test with this app.
Third step:
- unpack the IMG file of the TWRP for OS 7 in the link
Fourth step:
- wipe dalvik&cache then install the unpacked TWRP
- install OS 7 ROM then reboot
- From Google play install TWRP app then install the unpacked TWRP again from the app
- go to TWRP recovery using NDR Utils app
- be surprised
I got few questions, just to figure out where is the magic :
1. Which ROM version do we start from ?
2. What if we already got root? Skip to second step? I use MIUI8 6.12.22 MS and it already have root. And play store.
3. Why we have to flash the TWRP OS 5.1? I mean it already what we use.
4. What test to run with NDR Utils? It seems that it only works with TWRP XZDR recovery (I don't know what it is)
5. What is the OS 7 ROM we can flash? Is it the update version? And what for? To retain root? What if the update got no root? TWRP app need root to flash the IMG file, if the OS 7 ROM got no root then we're finished.
6. What if we just:
-Flash TWRP OS 7
-Flash OS 7 ROM with root
-Flash TWRP OS 7 again
-reboot, install TWRP app, flash the OS 7 IMG
Will it give the same result?
??????
your CAPTION Xiaomi mi4c Android 7 7.2.9
.
Your STEP Instal MIUOS 5.1
.
WHAT THE MEAN....??????????????????????????????????????????????????