Database Info

dual boot ( Lollipop, NetHunter)

Hello! I would like to know, you can install dual boot android lollipop [5.0.1] and Kali Linux NetHunter ? no problems during installation, because Kali has his kernel...
Thanks in Advance!

Install kitkat stock ROM flash nethunter using twrp,then take a complete backup using backup option in twrp and copy the twrp folder from sdcard completely to your PC. Wipe your device completely, then install 5.0.1 lollipop stock ROM,after installing setup your phone, install multi rom manager by vojtech bocek ,install multirom requirements such as multirom v 30,multirom twrp and the kernel;kernel version 5.0 to5.0.1. After installing the requirements Copy the backup folder from your PC which you have copied. boot into twrp and advanced>multirom>add ROM>android>backup select the backup file and install The backup file that's all you have been dual booted lollipop and nethunter

hariharansriram said:
Install kitkat stock ROM flash nethunter using twrp,then take a complete backup using backup option in twrp and copy the twrp folder from sdcard completely to your PC. Wipe your device completely, then install 5.0.1 lollipop stock ROM,after installing setup your phone, install multi rom manager by vojtech bocek ,install multirom requirements such as multirom v 30,multirom twrp and the kernel;kernel version 5.0 to5.0.1. After installing the requirements Copy the backup folder from your PC which you have copied. boot into twrp and advanced>multirom>add ROM>android>backup select the backup file and install The backup file that's all you have been dual booted lollipop and nethunter
Click to expand...
Click to collapse
can i install it on lg f180 using sling g rom? v3.3.1? (kitkat) (4.4.2)

abuapka said:
can i install it on lg f180 using sling g rom? v3.3.1? (kitkat) (4.4.2)
Click to expand...
Click to collapse
Please open a new thread IN your device's subforum here on XDA. These are subforums dedicated to the Google Nexus 5.

Which base rom is required for kali nethunter 1.21 ??? I tried flashing on Euphoria rom 5.1.1 but no luck ..after booting ..system ui crashed ..so cant use phone ..to hhad to delete in multirom ?? Please help
Sent from my Nexus 5 using Tapatalk

tusshar.gaba said:
Which base rom is required for kali nethunter 1.21 ???
Click to expand...
Click to collapse
In the case of a OnePlus One, this was a stock 4.4.4 ROM. If you're using Windows, you can use the official NETHUNTER WINDOWS INSTALLER, which selects the correct image to download based on your device model.
hariharansriram said:
Install kitkat stock ROM flash nethunter using twrp,then take a complete backup using backup option in twrp and copy the twrp folder from sdcard completely to your PC. Wipe your device completely, then install 5.0.1 lollipop stock ROM,after installing setup your phone, install multi rom manager by vojtech bocek ,install multirom requirements such as multirom v 30,multirom twrp and the kernel;kernel version 5.0 to5.0.1. After installing the requirements Copy the backup folder from your PC which you have copied. boot into twrp and advanced>multirom>add ROM>android>backup select the backup file and install The backup file that's all you have been dual booted lollipop and nethunter
Click to expand...
Click to collapse
I can confirm that this also works on OnePlus One! In my case these are the steps I followed (for your own sake, please read all steps before doing any of them):
Start from having a Stock CM12.0S Lollipop ROM installed.
If wasn't done previously: Backup + Unlock + Root + Backup EFS.
Install MultiROM and get it running according to one of the guides linked-to from the Play store page of MultiROM. Make sure you select the correct kernel version 5.0.x!!!! I wasn't paying attention and lost both of my WiFi and cellular connections after reboot and had to flash a bunch of stock ROMs randomly to fix it.
Perform a nandroid backup and copy it to your computer.
Install NetHunter using the Windows tool (may require manually flashing the kali_linux_nethunter_1.xx_...zip at the end) (see link at the top).
Install MultiROM again, this time on NetHunter, selecting the proper kernel (4.4.x).
Go to the MultiROM TWRP and:
Perform a nandroid backup as a precaution.
Transfer the first nandroid backup to device and add it as a ROM "from backup".
Swap the main ROM (which is currently NH) with the newly restored backup (Lollipop).
Boot into Lollipop and run MultiROM again, going through the setup steps again (this is needed so you could boot into NH. If you skip this step you will get a message when attempting to boot into NH that the kernel needs patching).
That's it!

Finally got NH to dual boot on my N5 CM12.1 nightly by installing multirom with CM12.1 kernel, search and download aosp_hammerhead-ota-eng.proxuser-14-11-2013 zip to your SD, flash via modded multirom twrp: advanced, multirom, add zip and reboot. Be quick and choose to boot into the Kitkat ROM. Reboot again but into recovery and flash SU to Kitkat ROM via advanced, list roms, choose the Kitkat rom, flash zip. Reboot once more and flash NetHunter Kitkat zip on top of the Kitkat rom you just flashed and rooted with SU via Advanced, multirom, list ROMs, choose Kitkat rom, flash zip. Optional: Reboot into recovery, go to advanced, multirom, list roms and rename it to whatever you want e.g. NetHunter. Reboot, Enjoy!
Tried several stock lollipop ROMs with NetHunter for lollipop to no avail. This is the only method I found that worked...

[GUIDE] Install custom ROM without computer

Hello everyone. I have come up with a lazy way to install custom ROM (such as Cyanogenmod) in *most* phone (I tried this on S3mini and Galaxy MEGA). Please note that this method moght not work on your phone and I am not responsible for bricking your phone.
Things you need:
-Your phone, fully charged
-Your precious time (About 30-60minutes)
-One click root app (I use Kingroot, download it with apk) (You may use other apps, of course)
-TWRP manager from playstore
-ZIP file of TWRP in latest version (V3?)
-ZIP file of the custom ROM matching the version of your device
-ZIP file of GApps matching the version of the custom ROM (Google for gapps and download it)
Steps:
1. Backup your personal information
Copy your personal information such as music, photo, documents out of your phone (e.g.: Cloud drive, USB, SD card). Safety first.
2. Root your phone
Download Kingroot and install the apk with package installer. Run the app and follow the instruction in the app to root.
3. Install TWRP manager
After rooting, install TWRP manager. In the app, install TWRP that match your device.
4. Create a backup for your phone
Boot your phone into recovery (Every phone have different method, so please google about this). In TWRP, press 'Backup' to create the backup.
5. Flash the latest version of TWRP
As the TWRP manager does not offer the latest version of TWRP, you have to flash the latest version by installing ZIP. The latest version of TWRP can install ROM with higher success rate.
To do this, press 'Install' in TWRP. Find the ZIP file of TWRP in latest version and install it.
6. Reboot your device to Recovery mode
7. Wipe your device
In TWRP, press 'Wipe'. Select Cache, Dalvik Cache, System and Data partition and wipe them.
8. Flash custom ROM
In TWRP, press 'Install'. Select the Custom ROM ZIP and install it.
9. Flash GApps
Most custom ROM does not have Google apps such as play stote, so you have to install it.
In TWRP, press 'Install'. Select the GApps ZIP and install it.
10. Wipe Cache and dalvik cache
In TWRP, press 'Wipe'. Select Cache and Dalvik Cache partition and wipe them.
11. Reboot your device
Now the ROM should be properly installed. First boot might take longer, so please wait patiently.
Shall you brick your phone, try to recover by using backup created in step 4.
PS: I am a newbie here and this is my first guide

While you have to wipe your device to flash the custom rom, it will wipe your data, including the actual Gapps and rom. This shows that your method won't work.

Xposed on moto g3

can someone tell me the detailed process of installing xposed on moto g3 xt1550 android 6.0.1.
Also are there any common issues while flashing??

dev77745 said:
can someone tell me the detailed process of installing xposed on moto g3 xt1550 android 6.0.1.
Also are there any common issues while flashing??
Click to expand...
Click to collapse
1. unlock bootloader
2. install official TWRP from here https://dl.twrp.me/osprey/ or unofficial one from here https://forum.xda-developers.com/2015-moto-g/orig-development/twrp-twrp-moto-g-2015-t3170537 and install it, (go to fastboot mode, copy recovery img file to the folder where adb is located, open command prompt inside that folder and type fastboot flash 'recovery name'.img.
4. Root your device, follow this guide https://forum.xda-developers.com/2015-moto-g/general/root-how-to-root-moto-g-2015-android-t3320113 or this guide https://forum.xda-developers.com/2015-moto-g/general/guide-how-to-root-moto-g-2015-model-t3448572
4. download xposed installer apk 3.1.1 from here: https://forum.xda-developers.com/showthread.php?t=3034811, framework installer from here http://dl-xda.xposed.info/framework/sdk23/arm/ and uninstaller from here: http://dl-xda.xposed.info/framework/uninstaller/
5. install xposed apk
6. flash xposed framework from twrp and wipe dalvik cache
7. reboot
8 if stuck on bootloop then flash uninstaller from twrp and wipe dalvik cache.
No issues should be there if you do everything properly. works perfectly.

[Guide] Step by Step Installation of Android Pie Custom Roms

Step by Step Installation of/Upgrade to Android Pie Custom Roms
Following this guide, you will lose all your data if haven't backed it up yet!!
Also NO USING GSI PIE!!!
Requirements:
- Twrp is already installed.
What you need:
- LineageosTWRP (Attached to thread)
- Custom Rom (can be found here)
- Open Gapps (Pico or Nano)
Only if Root is wanted: Chose either of them
Magisk(Recommended) or SuperSU
- A brain and a body
- The Knowledge that you will wipe your phone by doing this. Be Warned.
Installation:
1. Backup all the files that you have either by copying them to a usb drive ,a micro SD or your computer.
2. Check that all files are copied successfully and can be opened or viewed.
( Some apps have a cloud synchonisation feature, use it if you have it as an option since it is really helpful!)
3. Now, get your preferred rom, gapps and if wanted, your root method ready, also unzip the twrp file aswell.
Copy them to your micro SD.
4. Boot into twrp via adb or by using some app(root needed).
In Twrp, go into wipe option, then select change file system. Change file System to ext4.
4.1 Now use Twrp Reboot-Menu Option to reboot into recovery(twrp) again.
4.2 Wipe system, data, cache and dalvik-cache partitions using the Wipe option
5. Go into Install Option and Press on "Install IMG" , select pietwrp image and flash it. (The name should be lineagerecovery.img or something if downloaded via telegram)
(If you don't have it yet and are in the Lenovo P2 Telegram group, type #pietwrp in chat and make sure to safe it to your download folder. Otherwise it's also attached to this thread.)
6. Reboot back to recovery like you did in step 4.1.
7. Now install your rom and gapps.
8. Wipe cache and then reboot .
9. Setup your phone and Enjoy.
( For Root, reboot to recovery. Flash your Root Method, wipe cache and reboot)
Enjoy and thank your Devs
FAQ
Q: Instructions unclear, phone stuck in bootloop
A: Either do this:
Download this folder and use one of the two ".bat" files. Boot into Bootloader via Volume Down and Power Button. --
It will flash S048 Firmware of our Lenovo P2, after the flash-process is finished it will boot up on its own. Recommended: Do all the ota updates via ota app.
Or: Boot into bootloader, via adb cmd prompt use: fastboot boot lineagerecovery.img , then use reboot menu to reboot into twrp. Clean Wipe phone(Wipe system,data, cache and dalvik-cache Partitions) and try flashing your Rom etc. again.
Q: Instructions unclear, hardbricked my phone!!
A: Thaat shouldn't have happened. Did you screw up somewhere?...
Luckily you backed up your most important files!

How To Guide GSI Installation Guide for Realme C2

Requirement:
Gsi Download arm64-ab or bvN (on some download page)
For ColorOs Base
Twrp COS
Gsi Flash files
Stockboot.img
For RealmeUi Base
Twrp RMUI
Gsi Flash files
Stockboot.img
Installation
1.Reboot to Twrp
2.Factory reset device from Wipe >> Slide>>>
3.Format data from Wipe >> Format data>> Type Yes
4.Flash RMC2decryption.zip
5.Go to Advance wipe & wipe
dalvik, data, cache, internal storage & system
Do Not Wipe Vendor partion
6. Goto install & select install image from bottom right
7. Flash stockboot.img as boot
8. Flash (gsi filename).img as system image
9.Flash vbmeta.img as vbmeta (Download as per base)
10.Flash Deletebootanimation.zip (Read Note First)
11.Flash keystore.zip
12.Format data from wipe bottom right
13.Flash permissiver.zip (skip for RMUI)
14.Reboot System
Note:
only some gsi boot with bootanimation if device bootloop from bootanimation flash deletebootanimation.zip
if deletebootanimation.zip doesnt work delete file manually
System/system/media or system/system/product/media
Optional
For Root flash Magisk 20.3
(in phh based gsi Normal magisk.zip doesn't works)
Rooting on Android 11
make sbin folder in /system & /system_root/system then flash magisk zip
For discussion join
https://t.me/RealmeC2Community
For Gsi Fix follow #gsifix
For Modified Bootanimation #gsibootanimation

realme c2 color os v9.
what will I press in the last step 'do not install twrp' or 'reboot system' only ??

GSI AOSP Android 10
I've tried to open the GSI list you provided.
And I got confused which one do I have to download/pick and which file.
Do you have any recommendations for Android 10 stock AOSP?
Thanks in advance.
Cheers. :fingers-crossed:

Rj clno said:
what will I press in the last step 'do not install twrp' or 'reboot system' only ??
Click to expand...
Click to collapse
always do not install twrp app
Shinnosuke Nohara said:
I've tried to open the GSI list you provided.
And I got confused which one do I have to download/pick and which file.
Do you have any recommendations for Android 10 stock AOSP?
Thanks in advance.
Cheers. :fingers-crossed:
Click to expand...
Click to collapse
arm64 a/b or arm64 bvn/bgn v=vanilla g=gapps

I’ve downloaded the arm64 a/b gapps and go. I’ll try it later. Then I will tell you if I find any bugs and then upload the logs. Where should I upload it?

I am using :
system-roar-arm64-ab-gapps.img from here
TWRP 3.5.0_9-1 SIDDK
ColorOS GSI
adb version Version 30.0.5-6877874
I can't make it run. It loops in opening screen RealmeME (white logo) not Yellow font..
I still can boot to fast-boot mode and call twrp recovery.
Somebody can help me?
many thanks in advance

hey i am using the stock color os 9 on my rmx1943 it similar to rmx1945 yiu think i could use the old stockboot file for it on sourceforge

i'm getting an error whenever i'm trying to flash keystore for rmui. what should i do @Siddk

patrickbusto081302 said:
i'm getting an error whenever i'm trying to flash keystore for rmui. what should i do @Siddk
Click to expand...
Click to collapse
everything fine with keystore make sure u using latest recovery & using A10 keystore

Ahh...booting into recovery even if i press system

@arksolitude is that because you are trying to install android 10 for realme c2? if yes...
1. download stockrecovery.img (or get the recovery.img from the zip file you've downloaded)
2. reboot to bootloader/fastboot
3. type in your computer "fastboot flash recovery (name of the file).img"
4. reboot (this will take you to stock recovery)
5. wipe data and reboot
this is from my experience but this should work