Related
Hello! I would like to know, you can install dual boot android lollipop [5.0.1] and Kali Linux NetHunter ? no problems during installation, because Kali has his kernel...
Thanks in Advance!
Install kitkat stock ROM flash nethunter using twrp,then take a complete backup using backup option in twrp and copy the twrp folder from sdcard completely to your PC. Wipe your device completely, then install 5.0.1 lollipop stock ROM,after installing setup your phone, install multi rom manager by vojtech bocek ,install multirom requirements such as multirom v 30,multirom twrp and the kernel;kernel version 5.0 to5.0.1. After installing the requirements Copy the backup folder from your PC which you have copied. boot into twrp and advanced>multirom>add ROM>android>backup select the backup file and install The backup file that's all you have been dual booted lollipop and nethunter
hariharansriram said:
Install kitkat stock ROM flash nethunter using twrp,then take a complete backup using backup option in twrp and copy the twrp folder from sdcard completely to your PC. Wipe your device completely, then install 5.0.1 lollipop stock ROM,after installing setup your phone, install multi rom manager by vojtech bocek ,install multirom requirements such as multirom v 30,multirom twrp and the kernel;kernel version 5.0 to5.0.1. After installing the requirements Copy the backup folder from your PC which you have copied. boot into twrp and advanced>multirom>add ROM>android>backup select the backup file and install The backup file that's all you have been dual booted lollipop and nethunter
Click to expand...
Click to collapse
can i install it on lg f180 using sling g rom? v3.3.1? (kitkat) (4.4.2)
abuapka said:
can i install it on lg f180 using sling g rom? v3.3.1? (kitkat) (4.4.2)
Click to expand...
Click to collapse
Please open a new thread IN your device's subforum here on XDA. These are subforums dedicated to the Google Nexus 5.
Which base rom is required for kali nethunter 1.21 ??? I tried flashing on Euphoria rom 5.1.1 but no luck ..after booting ..system ui crashed ..so cant use phone ..to hhad to delete in multirom ?? Please help
Sent from my Nexus 5 using Tapatalk
tusshar.gaba said:
Which base rom is required for kali nethunter 1.21 ???
Click to expand...
Click to collapse
In the case of a OnePlus One, this was a stock 4.4.4 ROM. If you're using Windows, you can use the official NETHUNTER WINDOWS INSTALLER, which selects the correct image to download based on your device model.
hariharansriram said:
Install kitkat stock ROM flash nethunter using twrp,then take a complete backup using backup option in twrp and copy the twrp folder from sdcard completely to your PC. Wipe your device completely, then install 5.0.1 lollipop stock ROM,after installing setup your phone, install multi rom manager by vojtech bocek ,install multirom requirements such as multirom v 30,multirom twrp and the kernel;kernel version 5.0 to5.0.1. After installing the requirements Copy the backup folder from your PC which you have copied. boot into twrp and advanced>multirom>add ROM>android>backup select the backup file and install The backup file that's all you have been dual booted lollipop and nethunter
Click to expand...
Click to collapse
I can confirm that this also works on OnePlus One! In my case these are the steps I followed (for your own sake, please read all steps before doing any of them):
Start from having a Stock CM12.0S Lollipop ROM installed.
If wasn't done previously: Backup + Unlock + Root + Backup EFS.
Install MultiROM and get it running according to one of the guides linked-to from the Play store page of MultiROM. Make sure you select the correct kernel version 5.0.x!!!! I wasn't paying attention and lost both of my WiFi and cellular connections after reboot and had to flash a bunch of stock ROMs randomly to fix it.
Perform a nandroid backup and copy it to your computer.
Install NetHunter using the Windows tool (may require manually flashing the kali_linux_nethunter_1.xx_...zip at the end) (see link at the top).
Install MultiROM again, this time on NetHunter, selecting the proper kernel (4.4.x).
Go to the MultiROM TWRP and:
Perform a nandroid backup as a precaution.
Transfer the first nandroid backup to device and add it as a ROM "from backup".
Swap the main ROM (which is currently NH) with the newly restored backup (Lollipop).
Boot into Lollipop and run MultiROM again, going through the setup steps again (this is needed so you could boot into NH. If you skip this step you will get a message when attempting to boot into NH that the kernel needs patching).
That's it!
Finally got NH to dual boot on my N5 CM12.1 nightly by installing multirom with CM12.1 kernel, search and download aosp_hammerhead-ota-eng.proxuser-14-11-2013 zip to your SD, flash via modded multirom twrp: advanced, multirom, add zip and reboot. Be quick and choose to boot into the Kitkat ROM. Reboot again but into recovery and flash SU to Kitkat ROM via advanced, list roms, choose the Kitkat rom, flash zip. Reboot once more and flash NetHunter Kitkat zip on top of the Kitkat rom you just flashed and rooted with SU via Advanced, multirom, list ROMs, choose Kitkat rom, flash zip. Optional: Reboot into recovery, go to advanced, multirom, list roms and rename it to whatever you want e.g. NetHunter. Reboot, Enjoy!
Tried several stock lollipop ROMs with NetHunter for lollipop to no avail. This is the only method I found that worked...
Warning:This is an experimental find and i am not held liable if you brick your device (go into twrp and start over)
Installing Magisk in a Dual Boot Environment:
Things you need
(i advise to save all to your external card if you have one so it wont be erased):
Need to Create:
primary rom
secondary rom
gapps (unless you prefer one in link)
gapps in secondary (dual)
included in following link:http://www.mediafire.com/folder/95yswgomsz3d3/Magiskdualboot
gapps aroma(both normal and dual)
no verity zip(both normal and dual)
su remove(both normal and dual)
magisk 14.3 dualboot
dualbootutilities(just in case something goes wrong)
Dual boot patcher app
Step One:
Assuming your on the latest twrp for this rom (check official twrp app)
you will want to go to wipe in twrp and wipe data,
reboot to recovery,wipe advanced options and wipe everything except internal storaage and external storage then reboot into recovery again
Step 2:install primary rom,no verity,gapps,remove su addon,and magisk 14.3 dualboot zip.
(when everything loads set it up as you would normally making sure everythings up to date from play store,magisk manager update,etc
Step 3:install every magisk module you wish to have and reboot (once rebooted go into modules and unclick everything and reboot)
Step 4:get a root file manager and go into /data/adb in the root folder (make a copy of magisk.img and put on your sdcard)
step 5:install dual boot patcher app,run it,grant permission and when it asks to set kernal do so (everytime you change a rom it may ask you to set kernal)
step 6:use the patch zip file to patch your primary rom as an upgrade,then flash the patched primary rom then reboot to system (this allows nonconflict with other roms to avoid error and enables app sharing on the app)
step 7:assuming you downloaded the secondary rom,go to patch zip file section in the patcher app and add flash file and select your second rom zip and put it under secondary slot
step 8: patch as well in secondary:no verity zip,su remove zip and gapps.install the patched dual rom and files in twrp then reboot to system (it should start setting up your second rom)
step 9:update everything in second rom from play store plus do the setup
step 10:reboot back into recovery and install the dualboot magisk 14.3 zip again.reboot system and update that magisk manager and zip
step 11:install dual boot patcher app on the second rom now and itll ask you to set second kernal when you go to roms,do so
step 12:reboot back to recovery and then go advanced>file manager and then go /data/adb and select magisk.img copy file to data/multiboot/dual/data/adb/ then reboot to system.
step 13:now when you reboot into second rom you will notice in modules in magisk manager all the modules you had in primary are there
(be careful when enabling some as some will not work but its a small list)
(Warning:if theres any updates to any app you need to follow steps 12 and 13.
installing modules directly from the manager in second rom can cause bricks or crashes)
Step 14:have Fun
Tested Modules that work:
android mic fix,app systemizer,audio modification library,boot animation replacer,detach(doesnt really hide market links nomore but doesnt crash),google camera patch,google framework,init.d linker,iybp,mm recovery,max resolution for youtube,priviledged api booter,ram management by crok,secure if,single user mod,splatoon 2 font,sysconfig patcher,terminal app systemizer,terminal app debloater,teethering enabler,ts-bindsunified hosts adblock,universal dee buffer remover,busybox, universal safetynet fix beta v 5,volume steps increase,wifi bonding and xmlpak
Will give it a shot when I get the chance
could someone help me just install magisk with the either the stock rom, or even any of the custom ones?
Im unable to find a step by step guide similiar to this one, for installing magisk on lg k550 (without the dual boot option, as im a newbie and prefer not to add any extra possible complications )
takethe5th said:
could someone help me just install magisk with the either the stock rom, or even any of the custom ones?
Im unable to find a step by step guide similiar to this one, for installing magisk on lg k550 (without the dual boot option, as im a newbie and prefer not to add any extra possible complications )
Click to expand...
Click to collapse
All the ROMs on the 2 plus work for both models. Also do you have telegram. We are all there to give advice. I'm more the magisk expert though you can shoot a line thru there or follow guides we have posted. We welcome all new members
t.me/lgstylo2plus
Frosthaxx said:
All the ROMs on the 2 plus work for both models. Also do you have telegram. We are all there to give advice. I'm more the magisk expert though you can shoot a line thru there or follow guides we have posted. We welcome all new members
t.me/lgstylo2plus
Click to expand...
Click to collapse
I am looking for something similar but for LG Stylo 3 Plus.
Sent from my LGMS428 using XDA Labs
This guide is specifically aimed for Z010DD users who want to flash custom ROMs:If you want to stay on stock and only wanna flash TWRP and root the Stock ROM, please skip this thread and refer to @jide1 's guide here instead: https://forum.xda-developers.com/as...ot-asus-zenfone-max-zc550kl-qualcomm-t3652518
Things to be noted beforehand:
1. Make sure you are on the latest/final stock rom/firmware
2. Need Unlocked bootloader (Linked below, install the apk and follow the steps)
3. Take backup of all of your data from the internal storage. (To avoid depression if accidentally wiped your precious data)
4. Minimal ADB and Fastboot (Thread Linked below, Download from there and follow on-screen steps).
Steps:
A. To flash TWRP:
1. Once you have unlocked the bootloader, download 'minimal adb and fastboot zip' and PBRP zip(extract img from it).
2. Boot into fastboot by switching off the device, then POWER + VOLUME 'UP'. (You'll enter CSC ode screen, which is fastboot so don't worry)
3. Place the recovery image into the fastboot folder and open a command window there.
4. Connect your device, then type 'fastboot devices' and Enter, just to verify if your device is shown.
5. type: fastboot flash recovery recoveryname.img
THE NEXT STEP IS IMPORTANT, Pay Attention.
6. Now REBOOT Directly to twrp by holding POWER + VOLUME 'DOWN'. Don't boot into system else stock recovery will get restored.
B. Preparing for Flashing ROMs:
Once you have booted to twrp successfully, you will need to 'format' all the partitions, which includes:
System, Data, Cache, Dalvik/ART Cache, & Internal Storage.
HERE YOU WILL LOSE ALL OF YOUR DATA, YOU HAVE BEEN WARNED ALREADY SO, yeah.
Click to expand...
Click to collapse
1. In TWRP, go to WIPE -> ADVANCED WIPE;
2. Select the above listed partitions and then SWIPE TO WIPE.
Note: You will notice a partition called 'ASDF' ,wipe/skip, doesn't matter.
3. Come back to home, go to REBOOT -> RECOVERY
C. Flashing ROMs:
1. Download the ROM, Patch, and Kernel zip (Linked Below).
2. Flash them in the mentioned order.
3. Flash Opengapps (if needed) (Nano Gapps recomended).
4. Reboot.
(NOTE: FOR MAGISK, FLASH IT 'AFTER FIRST BOOT ONLY', AND IF FLASHING ZIP NOT WORKING, THEN see POST #3)
Bugs and Notes:
1. Notification LED doesn't BLINK when a notification arrives, it stays on (colors are correct though).
2. VoLTE is broken on pie roms (ignore the volte logo), stick to Oreo if you want VoLTE. (LTE data works fine).
3. Reboot Sometimes get stuck in black screen, its RANDOM, LONG Press the power button for 15 secs instead if that happens.
4. If any ROM contains 'Always On' functionality, disable it as the feature doesn't work properly. (Ambient display has no issues)
Links: Refer POST #2 .
Credits:
@SakilMondal for roms.
@YaAlex for kernel and patch for Z010DD.
Myself for testing.
Created 2019-04-22
Last Updated 2019-05-20
Links:
ROMs: https://sourceforge.net/projects/zenfone-max-updates/files/Z010D/ (Please flash the latest ones only, don't use old ones)
Patch (link updated): https://anonymousfiles.io/3WLplRtD/
Kernel (link updated + new kernel update): https://anonymousfiles.io/m4oKP6wL/
TWRP Recovery (Image file, Flash via fastboot): https://drive.google.com/file/d/1txHT0vRNo0gTMkD0Sb5kpuQQT0dAiphH/view
ASUS Official Bootloader Unlock Tool for 8939 Devices: http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
Minimal ADB and Fastboot: https://forum.xda-developers.com/showthread.php?t=2317790
Troubleshooting:
Instructions for Magisk:
1. Extract boot image from the rom zip
2. Go to Magisk Manager app
3. Tap 'Install' next to 'Magisk is not installed' line.
4. Tap 'Select and patch a file'
5. Navigate to the extracted boot image. It will now create a new boot image and save it in mentioned location.
6. Reboot to recovery, Flash the Boot image + KERNEL zip.
7. Reboot to system.
To fix CTS Mismatch in Magisk:
Open /system/build.prop, replace the line 'ro.build.fingerprint=' with:
Code:
ro.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Open /system/vendor/build.prop , replace the line 'ro.vendor.build.fingerprint=' with:
Code:
ro.vendor.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Patch is required for sd410 devices??
koushik99 said:
Patch is required for sd410 devices??
Click to expand...
Click to collapse
Nope, patch is only for DD.
Guide has been updated. Please check.
unable to flash GAPPS
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
PRASAD.ASRS said:
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
Click to expand...
Click to collapse
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
ihatebarrels said:
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
Click to expand...
Click to collapse
In both oreo and pie, for both z010d and dd, reboot and shutdown is an issue
It doesn't happen everytime, its random, and no fix is found yet.
Is it working on asus zenfone max 2016 sd 615?
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
james_imch said:
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
Click to expand...
Click to collapse
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Kaustav365 said:
Is it working on asus zenfone max 2016 sd 615?
Click to expand...
Click to collapse
Hope you have read the OP properly
This thread is only for sd615/Z010DD/MSM8939, and its clearly mentioned.
TechNova said:
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Click to expand...
Click to collapse
PBRP Recovery (flashable zip) link is also not working. Please update it.
james_imch said:
PBRP Recovery (flashable zip) link is also not working. Please update it.
Click to expand...
Click to collapse
Done,
Removed pbrp and now Twrp link posted.
TechNova said:
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
Click to expand...
Click to collapse
Hey! I am also facing the same issue. I tried the nano version of Gapps on my Asus Zenfone Max Z010D and my phone is still crashing it keeps restarting and then automatically turns off. Is there any issue to fix this?
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Eric0000 said:
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Click to expand...
Click to collapse
I too facing same problem
Unlocking the apk no longer works
Requirement:
Gsi Download arm64-ab or bvN (on some download page)
For ColorOs Base
Twrp COS
Gsi Flash files
Stockboot.img
For RealmeUi Base
Twrp RMUI
Gsi Flash files
Stockboot.img
Installation
1.Reboot to Twrp
2.Factory reset device from Wipe >> Slide>>>
3.Format data from Wipe >> Format data>> Type Yes
4.Flash RMC2decryption.zip
5.Go to Advance wipe & wipe
dalvik, data, cache, internal storage & system
Do Not Wipe Vendor partion
6. Goto install & select install image from bottom right
7. Flash stockboot.img as boot
8. Flash (gsi filename).img as system image
9.Flash vbmeta.img as vbmeta (Download as per base)
10.Flash Deletebootanimation.zip (Read Note First)
11.Flash keystore.zip
12.Format data from wipe bottom right
13.Flash permissiver.zip (skip for RMUI)
14.Reboot System
Note:
only some gsi boot with bootanimation if device bootloop from bootanimation flash deletebootanimation.zip
if deletebootanimation.zip doesnt work delete file manually
System/system/media or system/system/product/media
Optional
For Root flash Magisk 20.3
(in phh based gsi Normal magisk.zip doesn't works)
Rooting on Android 11
make sbin folder in /system & /system_root/system then flash magisk zip
For discussion join
https://t.me/RealmeC2Community
For Gsi Fix follow #gsifix
For Modified Bootanimation #gsibootanimation
realme c2 color os v9.
what will I press in the last step 'do not install twrp' or 'reboot system' only ??
GSI AOSP Android 10
I've tried to open the GSI list you provided.
And I got confused which one do I have to download/pick and which file.
Do you have any recommendations for Android 10 stock AOSP?
Thanks in advance.
Cheers. :fingers-crossed:
Rj clno said:
what will I press in the last step 'do not install twrp' or 'reboot system' only ??
Click to expand...
Click to collapse
always do not install twrp app
Shinnosuke Nohara said:
I've tried to open the GSI list you provided.
And I got confused which one do I have to download/pick and which file.
Do you have any recommendations for Android 10 stock AOSP?
Thanks in advance.
Cheers. :fingers-crossed:
Click to expand...
Click to collapse
arm64 a/b or arm64 bvn/bgn v=vanilla g=gapps
I’ve downloaded the arm64 a/b gapps and go. I’ll try it later. Then I will tell you if I find any bugs and then upload the logs. Where should I upload it?
I am using :
system-roar-arm64-ab-gapps.img from here
TWRP 3.5.0_9-1 SIDDK
ColorOS GSI
adb version Version 30.0.5-6877874
I can't make it run. It loops in opening screen RealmeME (white logo) not Yellow font..
I still can boot to fast-boot mode and call twrp recovery.
Somebody can help me?
many thanks in advance
hey i am using the stock color os 9 on my rmx1943 it similar to rmx1945 yiu think i could use the old stockboot file for it on sourceforge
i'm getting an error whenever i'm trying to flash keystore for rmui. what should i do @Siddk
patrickbusto081302 said:
i'm getting an error whenever i'm trying to flash keystore for rmui. what should i do @Siddk
Click to expand...
Click to collapse
everything fine with keystore make sure u using latest recovery & using A10 keystore
Ahh...booting into recovery even if i press system
@arksolitude is that because you are trying to install android 10 for realme c2? if yes...
1. download stockrecovery.img (or get the recovery.img from the zip file you've downloaded)
2. reboot to bootloader/fastboot
3. type in your computer "fastboot flash recovery (name of the file).img"
4. reboot (this will take you to stock recovery)
5. wipe data and reboot
this is from my experience but this should work
There is an issue with the kernel source of the tablet. Sometimes, it gets stuck on recovery. But there is a workaround.1) Custom recovery with touch (TWRP and variants)
Open the terminal (located under Advanced -> Terminal)
Execute busybox reboot
If it fails, please ask your recovery's maintainer to add busybox support
That's it! You should be rebooting to system.
2) Custom recovery without proper touch (CWM and variants)No solution for these. Flash TWRP.
3) Stock recoveryYour system is corrupted and cannot boot into system. Flash stock ROM.
Thanks for reading