Related
Hi guys,
Here is my complete foolproof guide on how to update your system. Please note that there may be other maybe easier ways that cut-out some steps but this worked for me. It is intended for Noobies so I apologise to more advanced users if it seems tedious and long-winded. But that's how Noobies like it with everything explained in detail.
IMPORTANT NOTE: If you have previously used parallel apps then before doing any of this process you must delete user 999 from the system, otherwise you backups will not work!!!
From a terminal window (I use terminal emulator from play store ) type su and enter. Now type the command pm remove-user 999 and enter. Now you shouldn't have to worry about parallel apps messing up your backups.
Thanks to @dgunn for this :good:
https://forum.xda-developers.com/on...estore-999-t3801632/post76760812#post76760812
Also, please note that I have NEVER previously installed an un-official twrp on my device (wanted to wait for official ), however, I was unlocked, and rooted with magisk v16.0 and on stock oos 5.1.5 before beginning this upgrade process.
If you already have an un-official twrp installed, then I cannot guarantee that this guide will work for you. It might, it might not
Disclaimer: This is a guide for helping others. It is your choice to follow it and I take no responsibility for any problems you encounter as a result of following this guide. You do it at your own risk
Ok, lets get started......................
Actually, before we do let's get one thing clear that is confusing a lot of people regarding fastboot and twrp. There are 2 ways of putting twrp recovery onto your phone. A temporary way (disappears after rebooting and goes back to stock recovery) and a permanent way (the best way that stays put - what we all want right?). This guide assumes that you don't currently have twrp on your phone.
In order to put a permanent official twrp on your phone, first we have to boot (NOT flash!) into a temporary version of twrp. The fastboot command for this is "fastboot boot path_to_temporary_twrp.img" (without the quotes of course )
The difference between temporary twrp and permanent twrp is in whether we either fastboot boot or fastboot flash.
Ok, let's begin
First of all, as a precaution, disable all security on your device like pin, pattern, password, fingerprint. Make sure that when you wake your phone it goes straight to the homescreen without any prompts for pins etc etc. May not be needed but it's what I did
1. Download the following files to the following locations....
a. Official oxygen OS 5.1.6 zip file (full zip) > to root of sdcard .
b. Official twrp installer ZIP file > to root of sdcard. (This is our permanent twrp file)
c. Magisk root zip file (I used v 16.0 but v16.4 zip file should be okay too) > to root of sdcard.
d. Official twrp installer IMG file > to your PC in the same folder as your fastboot files. (This is our temporary twrp file)
These files are available for download in other threads on XDA just search for them.
Once that is done proceed as follows.....
2. Go to settings>system updates and click the gear icon in the top right and choose "local upgrade" and then select the Oxygen 5.1.6 zip file from your sdcard. The system will now begin to update itself. Once finished it will prompt you to reboot, do this, and the system will boot back up into Oxygen OS 5.1.6 :good:
3. Now, long press your power button and select reboot and select bootloader option and your phone will reboot into bootloader (fastboot) mode.
4. On your PC go to your fastboot folder and open a command prompt in that folder (don't forget you previously put the temporary twrp image file in here)
5. Now plug your phone into the PC
6. At the command prompt enter following command fastboot devices
and your phone should show up as connected and recognised.
7. We are now going to boot the phone into the temporary twrp. Type the following command fastboot boot <name of temporary twrp file (from your fastboot folder)>.img
8. Your phone will now boot into the temporary twrp recovery and from here we can now flash the permanent version of twrp that we previously put on our sdcard.
9. On your phone, select Install, then find the twrp zip file on the root of your sdcard, select it and swipe to flash.
10. Once this has flashed successfully, we now need to reboot into this new permanent recovery. DO NOT REBOOT TO SYSTEM AT THIS POINT! Now, select "Reboot" option and select "Recovery". Your phone will now reboot into the new permanent twrp. You can now forget about the other temporary twrp from earlier
11. Once the phone goes back into recovery select Install option and find the Magisk root zip file on your sdcard and select it. Now swipe to flash it. After successfully flashing Magisk, you are now ready to enjoy the fruits of your labours
Go back to the twrp homepage and select Reboot>system.
The system will now boot normally and if you have followed these steps to a Tee you will be on OOS 5.1.6 and rooted!
I have also done a successful twrp backup without any error messages. Your previous data will be untouched and you can now set-up your security again.
One final thing to note - because the boot and recovery partitions are now combined, this means that everytime you flash something to your boot partition, your new permanent twrp recovery will be lost and you will have to re-install twrp again from scratch initially through fastboot.
Enjoy
carlos67 said:
From a terminal window (I use terminal emulator from play store ) type su and enter. Now type the command pm remove_user 999 and enter. Now you shouldn't have to worry about parallel apps messing up your backups.
Click to expand...
Click to collapse
I bet the terminal command should be:
pm remove-user 999
I've made almost the same without problem
After many years of being actively involved in unlocking, flashing, and tinkering. I feel I'm starting from scratch. This quick guide is exactly what I've been waiting for as I'm in the same situation with being simply unlocked and rooted lol. I'll be replicating these steps shortly ?.
Only thing I'm wondering, once everything is done and running... If I flash a rom with the official "permanent" twrp, it's gone gone? Let's just say, renovate ice ROM?
Maybe it's the 16 hour day I worked and lack of sleep... But having it replaced upon a single rom flash and carrying the name "permanent" seems like 2 opposing ideas lol
Kiddman said:
I bet the terminal command should be:
pm remove-user 999
Click to expand...
Click to collapse
Yes, well spotted and corrected :good:
InflatedTitan said:
After many years of being actively involved in unlocking, flashing, and tinkering. I feel I'm starting from scratch. This quick guide is exactly what I've been waiting for as I'm in the same situation with being simply unlocked and rooted lol. I'll be replicating these steps shortly ?.
Only thing I'm wondering, once everything is done and running... If I flash a rom with the official "permanent" twrp, it's gone gone? Let's just say, renovate ice ROM?
Maybe it's the 16 hour day I worked and lack of sleep... But having it replaced upon a single rom flash and carrying the name "permanent" seems like 2 opposing ideas lol
Click to expand...
Click to collapse
If you were to flash a full OTA official update then yes, your "permanent" twrp will be gone because the boot partition gets flashed to stock and you'd need to re-install twrp starting in fastboot. However, for custom rom flashes, it depends if their is a kernel bundled in with the rom. If not then twrp should remain, if yes then as with official update, re-install twrp.
It's more normal for a custom rom to simply overwrite system partition without touching boot partition and twrp, but, sometimes custom rom's like Renovate come bundled with a kernel (TBalden's) and wipe out twrp.
If I'm wrong on this I stand to be corrected.
Kiddman said:
I bet the terminal command should be:
pm remove-user 999
Click to expand...
Click to collapse
Yes you are correct because this was my finding and thank you OP for not giving credit
My findings of the 255 error (999)
https://forum.xda-developers.com/oneplus-6/how-to/255-error-twrp-backup-restore-999-t3801632
dgunn said:
Yes you are correct because this was my finding and thank you OP for not giving credit
My findings of the 255 error (999)
https://forum.xda-developers.com/oneplus-6/how-to/255-error-twrp-backup-restore-999-t3801632
Click to expand...
Click to collapse
My apologies, an oversight, corrected
carlos67 said:
My apologies, an oversight, corrected
Click to expand...
Click to collapse
Thank you sir. And great write up btw
Something to note is the Renovate ICE 1.0 magisk module messed with the text in settings on OOS 5.1.6. It went back to normal when I disabled that module.
I thought it was the VoEnabler module initially but I wasnt correct.
I put the zip in the root folder (Not the actual folder named root) but the local upgrade isn't showing anything in there.
I'm on 5.1.5 rooted with Magisk 16.0 and have 5.7 magisk manager installed along with xposed and gravity box.
Any idea why my local upgrade isn't detecting the upgrade zip? I downloaded it from Funk Wizards post. I got clicked the "official" link for OOS 5.1.6
I have a custom kernel and magisk installed, can I still follow this guide?
surface13 said:
I put the zip in the root folder (Not the actual folder named root) but the local upgrade isn't showing anything in there.
I'm on 5.1.5 rooted with Magisk 16.0 and have 5.7 magisk manager installed along with xposed and gravity box.
Any idea why my local upgrade isn't detecting the upgrade zip? I downloaded it from Funk Wizards post. I got clicked the "official" link for OOS 5.1.6
Click to expand...
Click to collapse
Figured it out, it was because the ro.product.device=OnePlus 6 instead of OnePlus6 in the build.prop file.
I had originally changed it to sailfish to see if I can get Daydream working. When I changed it back I accidentally added a space =/
Anyone done this on a phone with unofficial TWRP to start out yet?
Lownita said:
I have a custom kernel and magisk installed, can I still follow this guide?
Click to expand...
Click to collapse
Yes you can.
Considering that many of us have been rooted with patched boot image and no custom recovery, this guide is very well written.
Simple Guide is Already available | No Root | No Rom
youtube.com/watch?v=a7rh4NpYD7E
I followed the above youtube guide . Very simple .
Steps :
Install VPN app like Surf Easy Android VPN
Change Region to Canada or Germany
Again try to update the Oxygen OS
It will show in update available .
"
2. Go to settings>system updates and click the gear icon in the top right and choose "local upgrade" and then select the Oxygen 5.1.6 zip file from your sdcard. The system will now begin to update itself. Once finished it will prompt you to reboot, do this, and the system will boot back up into Oxygen OS 5.1.6
"
After that I got constant reboot with the message " System UI has stopped"
x111 said:
"
2. Go to settings>system updates and click the gear icon in the top right and choose "local upgrade" and then select the Oxygen 5.1.6 zip file from your sdcard. The system will now begin to update itself. Once finished it will prompt you to reboot, do this, and the system will boot back up into Oxygen OS 5.1.6
"
After that I got constant reboot with the message " System UI has stopped"
Click to expand...
Click to collapse
Could be a corrupt download file. I suggest you do the following.....
Re-download the file and check it's good using an MD5 checker app/tool. Then, boot your phone into bootloader (fastboot) mode by powering off first and then pressing and holding the vol up button.
Then follow steps 4-to-10 in my guide for installing (1st) temporary twrp and then (2nd) permanent twrp. Once you have permanent twrp and are booted into it you should then copy the "new" download zip for the OTA that you md5 checked from your PC onto the root of your sdcard and install it by flashing the zip file in twrp. Now you should reboot to system which will change the active slot to the updated OOS you just flashed and then if you want boot back into recovery to flash a custom kernel (if you so wish) and Magisk root zip (again if you so wish).
carlos67 said:
Could be a corrupt download file. I suggest you do the following.....
Re-download the file and check it's good using an MD5 checker app/tool. Then, boot your phone into bootloader (fastboot) mode by powering off first and then pressing and holding the vol up button.
Then follow steps 4-to-10 in my guide for installing (1st) temporary twrp and then (2nd) permanent twrp. Once you have permanent twrp and are booted into it you should then copy the "new" download zip for the OTA that you md5 checked from your PC onto the root of your sdcard and install it by flashing the zip file in twrp. Now you should reboot to system which will change the active slot to the updated OOS you just flashed and then if you want boot back into recovery to flash a custom kernel (if you so wish) and Magisk root zip (again if you so wish).
Click to expand...
Click to collapse
Thanks for response.
https://forum.xda-developers.com/showpost.php?p=76773727&postcount=153
Followed the procedure: Installed EX Kernel as well. Now I'm getting a popup message after every reboot: There's an internal problem with your device. Contact your manufacturer for details.
No issues as such but I'm getting this message everytime I reboot. Any suggestions?
Welcome to this guide, where I will guide you through rooting, flashing custom roms, and more, on our little Umidigi One Max !
WARNING : I am not responsible for your phone breaking or exploding during the night under your pillow. Please advice. If you cannot boot anymore, keep reading, your phone is NOT dead.
OFFICIAL ROM (Android 8.1)
The Umidigi One Max comes with Android 8.1 Out of the Box. Manufacturer has no plan on having 9.0 on the phone. That's why we root then ! Let's get into it.
Rooting the phone without unlocking it, or installing TWRP
Everything you'll do on this phone will NOT require a bootloader unlock. Note that this method is only in case you don't want to have your data wiped, or don't have access to an SD card (thus you cannot flash .zip in TWRP, except for ADB Sideloads)
What you'll need
Download the latest ROM from Umidigi's website : https://community.umidigi.com/forum.php?mod=forumdisplay&fid=211
Choose the ".rar" file
"E" ROMs are for European versions. It doesn't really matter what you choose.
Download SP Flash Tool on the same thread you opened for the ROM. It's "SPFT" for short
Unzip both
Install Magisk Manager on your phone : https://github.com/topjohnwu/Magisk/releases/
Steps
IMAGE COURTESY OF bencebacsi @ Umidigi forums
In the unzipped ROM folder, find boot.img
Copy it to your phone storage using an USB cable or any other method
Open Magisk Manager, press install
Choose "patch boot image file"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let magisk do it's job
Find the boot.img file you just copied
Copy the patched_boot.img back to your computer
Open SP Flash Tool
Open the "Download" tab
In "Scatter-loading file", press the folder icon and browse to the downloaded ROM folder. Choose the only file that shows up
Untick every box except for boot. There is a column called "Location" with a path, click on it to change to file.
Choose patched_boot.img
MAKE SURE YOU UNTICKED EVERYTHING EXCEPT BOOT
Click the "Download" button
Turn off your phone (not reboot) and connect is via USB
wait for the flash to succeed. Once done, unplug, boot, voila ! You got magisk !
Credits to topjohnwu for Magisk, what a great piece of work
Installing TWRP
Note that if you want to access the /data partition (internal storage), you'll have to wipe it ! If you do not need it, keep going, it won't wipe unless you want to.
What you'll need
Official TWRP recovery.img by chankruze : https://twrp.me/umidigi/onemax.html
Magisk.zip installer (NOT the manager) : https://github.com/topjohnwu/Magisk/releases/
SP Flash Tool : http://www.mediafire.com/file/wxlld9dfywk67jl/SP_Flash_Tool_v5.1916.rar/file
This method is shorter and requires less downloaded files.
Steps
Turn off your phone
Run SP Flash Tool
Load the scatter file (see pictures above) you downloaded from the latest ROM (see above as well)
Untick everything except recovery
Change path to recovery.img to be the TWRP image
Click "Download" and plug your phone
After it's done, unplug, and press Power + Vol Up
You'll see three options appearing. That's how you'll get to the recovery. Use Vol Up to scroll, and Vol Down to select. Choose Recovery Mode !
TWRP should boot by now
EXTRA STEP : Make /data readable. You will need to format data (YOU'LL LOSE ALL YOUR DATA) (Wipe > Format Data > Type "yes") and after that, flash this zip : https://androidfilehost.com/?fid=1322778262904004415
You can now proceed to flash zips, including Magisk.zip. If you made /data readable, you can send it to your internal storage. If not, use an SD CARD or ADB PUSH / SIDELOAD.
Returning to stock to fix issues / brick
Use SP Flash tool but instead of unticking everything, tick everything. Note that USERDATA, if ticked, will clear your data.
Ticking only certain partitions may work if you got issues with magisk or system mods and are still on Official ROM. Flashing boot and system will remove Magisk. If you are on custom ROM, you can flash their system again to fix issues as well. Make sure to choose the right system.img in SPFT !
OTHER ROMS
Installing GSI (Generic System Image) to get Android Pie 9.0
GSI takes advantage of Project Treble to create one system image that will work on most devices without issues due to a separate "vendor" partition. The One Max is Treble-compatible, but only up to 9.0 (No 10 Q for now)
This will allow you to get an AOSP experience, with it comes easy modding and theming, and less bugs, less chinese-spying (that's a thing apparently, but who cares really ? Not me to say the least)
GSI List
You can find a GSI List including bugs and download links in my other thread here : https://forum.xda-developers.com/android/development/gsi-gsi-experiments-t3941194
WARNING : DOWNLOAD GSIs WHICH ARE ARM64-AONLY AND NOT AB !
Installing a GSI
You will need TWRP Installed. Check above if it's not done yet. You'll also need the Magisk.zip, and I highly recommend you getting the disable-force-encryption zip
Start up by wiping /data in twrp (Wipe > Swipe the bar). It will not wipe the files in your internal storage (Music, Download, etc...). If you want to get access to /data in TWRP (which I highly recommend), you'll need to do a full format (Wipe > Format data > type yes).
Download a GSI (.img) and send it to your phone (Either using an SD Card, or adb push [file on computer] [destination folder]). Send Magisk and the disable-force-encryption zip at the same time.
Flash that system image using Install > Install Image > Browse to the .img file
Flash disable-force-encryption if you formatted /data (don't flash it if you didn't do that !)
Flash Magisk.zip
Reboot and profit !
Note that there might be some issues with the GSI you choose. Most GSI suffers issues regarding Wifi Tethering/Hotspot. Other than that, check for my thread for issues regarding GSIs.
Some GSI require installation of GAPPS (Google Apps). Download a GAPPS zip and flash it at : https://opengapps.org/ (Choose ARM64 and 9.0)
If Installation fails, saying that system size is too small, go to (Wipe > Advanced Format > Tick "System" > Repair or change file system > Resize File System) and try flashing again.
INTERESTING MODS FOR ALL ROMS
Magisk FDE.AI
A great system manager. Saves a ton of battery without a performance hit. You need magisk installed. XDA Thread : https://forum.xda-developers.com/apps/magisk/beta-feradroid-engine-v0-19-ultimate-t3284421
Fix SafetyNet not passing on custom ROMs/GSIs
SafetyNet will not pass by default on custom ROMs / GSIs.
Use Magisk Hide Prop Config : https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
Run 'su' then 'props' in a terminal emulator. Edit Device fingerprint, choose Pick a certified fingerprint. I recommend using Xiaomi Redmi Note 7, as it changes the status-bar to be notch sized.
Note that you may need to do this next fix to make 'su' work :
Root request not working with Magisk
On some GSIs, root requests will not show up. You need to move some vendor files over to system.
Use TWRP's File Manager (Advanced > File Manager) or Adb shell to copy theses files :
Code:
/vendor/lib/libdirect-coredump.so
COPIED TO
Code:
/system/lib/libdirect-coredump.so
Code:
/vendor/lib64/libdirect-coredump.so
COPIED TO
Code:
/system/lib64/libdirect-coredump.so
This will fix this issue until GSI / ROM creator fixes it in their ROM;
Enjoy your new phone ! Don't forget to say thanks to all the developers behind every project (not me ! I didn't do anything )
If you have any issues, feel free to ask questions !
See you on the other side
Downloaded phhusson's AOSP ROM
Extracted compressed image. Then...
Wiped Phone from TWRP w/ all three options Swipe, Formatted (Type "Yes"), and advanced wipe.
From TWRP went to:
Install > Install Image > Selected system-arm64-ab-gapp-su.img > Select Partition to flash image
From this screen it lists these partitions for selection:
-recovery
-nvram
-uboot
-boot
-logo
-tee
-System Image
I select System image. It starts flashing. After it has finished, I go to reboot, and that is when TWRP states "No OS installed".
Am I downloading the wrong image file?
*********************EDIT****************************
Nevermind. I downloaded system-arm64-aonly-gapps-su.img.xz and it boots fine with gapps included
Exactly, you downloaded A/B image, not A-only.
Using phhusson's AOSP ROM. I got the root requests show up. However the superuser app is blank. Nothing shows in the list.
Request for a video to install GSI
Hello
I'm using Umidigi One Max Android 8.1 and want to upgrade to 9.0 . Can you please make a YouTube video showing how to install the GSI version I'd gladly appreciate it.
Over the last month or so, I've tried multiple GSI ROMs, and stock. I've rooted stock, and everything runs nicely, I just can't stand the lack of features. Even rooted on stock, Google Pay still works. If I install a GSI ROM like Havok, root it, gpay will not work. Not sure why it works on stock rooted with magisk, but not with other ROMs.
I'm looking for a hacked stock rom for the one max that:
A.) Can be rooted.
B.) Can still run gpay.
C.) Has a advanced restart option to boot directly into recovery.
D.) Displays the battery in the status bar as a percentage rather a symbol, and a clock with seconds option.
If I had those options, I would stick with stock. I can accomplish all those options with Havoc GSI ROM, I just can't get NFC/gpay to work.
su
how did you repair su binsaries after flasing (in twrp the vendor folder is empty)
everything else works
@ _cab13_
thanks for tutorial
some comments/questions
Image shows MT6739 in phone image and scatter file of mt6739
My phone is MT6363 and appears to agree with online specs site such as
https://www.gsmarena.com/_umidigi_one_max-9525.php
Am I looking at the wrong tutorial or umm have you grabbed images from another phone and forgot to say so?
w1lh3lm3d said:
how did you repair su binsaries after flasing (in twrp the vendor folder is empty)
everything else works
Click to expand...
Click to collapse
You have to mount the folder system and vendor for reading and writing and you can copy it, this is in recovery mount
Very helpfull, thanks)
Has anyone tried dual SIM and SD hack on this phone? I cant get my to work. When I do the hack, phone does not see any sim cards nor SD card.
However if I put only two sims, or sim and SD everything works well.
It is almost like issue w Samsung but no warning message
can i use this process on umidigi one as well
q1. Can i use this process on umidigi one as well?
When i visit "Official TWRP recovery.img by chankruze : https://twrp.me/umidigi/onemax.html" and search on devices they don't have umidigi one or one pro only the one max option. Other than screen size all three are pretty much spec'd the same. The umidigi one just doesn't have wireless charging or nfc that one pro and one max have and one max has 6.3 waterdrop vs one/one pro 5.9 notch display but all 720x1520 9:19 aspect ratio configurations. I found a umidigi one and one pro twrp recovery image here _https://unofficialtwrp.com/umidigi-one-umidigi-one-pro-root-twrp-recovery/ so if i have that are all the other downloads for doing non-rooted device upgrade to 9 pie non-device specific downloads?
q2. Nice to see this process covers a way to get form 8.1 to 9 w/o rooting device. Having never done so i'm curious why other search hits cover steps that require rooting device if the upgrade can be achieved without doing that, any insights?
q3. Would you say the likelyhood of bricking my device, if trying to follow these instructions using umidigi one vs one max, very low? Trying to determine if i should first line up and have on hand backup phone to use if the chance of that happening is high.
does magisk install allow me to upgrade to android 9 pie?
does magisk install allow me to upgrade to android 9 pie from the default android 8.1 oreo on my umidigi one or do i have to use the twrp recovery setup option to enable installing gsi arrowos or pixel experience android 9 pie update?
myusrn said:
does magisk install allow me to upgrade to android 9 pie from the default android 8.1 oreo on my umidigi one or do i have to use the twrp recovery setup option to enable installing gsi arrowos or pixel experience android 9 pie update?
Click to expand...
Click to collapse
Yes, with the single installation of magisk you could upgrade to Android 9, but you would have many more functions through TWRP. how to remove encryption, backup, etc.
drkiro said:
Yes, with the single installation of magisk you could upgrade to Android 9, but you would have many more functions through TWRP. how to remove encryption, backup, etc.
Click to expand...
Click to collapse
Thanks for reply. I was trying to see android 9 pie in magisk modules listings reviewed elsewhere and wasn't seeing what looked like a full android 9 install but rather options that themed and existing android 8.1 like android 9.
q1. If i complete the spft application of magisk_patched.img version of boot.img and try the android 9 module update option that's a one way street correct?
q2. Can one disable magish_patched.img version of boot.img by using spft to put the oem boot.img back in place?
q3. Sounds like twrp is the best way to put the official pixel experience android 9 [ or 10 ] custom rom on my umidigi one device. Your article shows how to get twrp enabled without bootloader unlocking the device. Any insights as to why there are so many articles suggesting that you have to bootloader unlock device to get twrp custom recovery image installed?
myusrn said:
Thanks for reply. I was trying to see android 9 pie in magisk modules listings reviewed elsewhere and wasn't seeing what looked like a full android 9 install but rather options that themed and existing android 8.1 like android 9.
q1. If i complete the spft application of magisk_patched.img version of boot.img and try the android 9 module update option that's a one way street correct?
q2. Can one disable magish_patched.img version of boot.img by using spft to put the oem boot.img back in place?
q3. Sounds like twrp is the best way to put the official pixel experience android 9 [ or 10 ] custom rom on my umidigi one device. Your article shows how to get twrp enabled without bootloader unlocking the device. Any insights as to why there are so many articles suggesting that you have to bootloader unlock device to get twrp custom recovery image installed?
Click to expand...
Click to collapse
Magisik, is used so that android 9 can boot, (now 10), in the system update to android 9, you only update the System partition, everything else remains as the manufacturer installed it, when you install twrp, you only change the partition recovery, and when you install magisk you change the boot partition, all this can be reversed, if you install the original versions.
drkiro said:
Magisik, is used so that android 9 can boot, (now 10), in the system update to android 9, you only update the System partition, everything else remains as the manufacturer installed it, when you install twrp, you only change the partition recovery, and when you install magisk you change the boot partition, all this can be reversed, if you install the original versions.
Click to expand...
Click to collapse
just to clarify, with the magisik patched boot.img i'm then able to apply a module that enables access to android 9 [ or 10 ] in the system update UI at which point i will carry out a standard issue android 8.1 to 9 [ or 10 ] upgrade process vs twrp where it appears you directly apply a gis custom rom like the mainstream pixel experience or arrowos options?
myusrn said:
just to clarify, with the magisik patched boot.img i'm then able to apply a module that enables access to android 9 [ or 10 ] in the system update UI at which point i will carry out a standard issue android 8.1 to 9 [ or 10 ] upgrade process vs twrp where it appears you directly apply a gis custom rom like the mainstream pixel experience or arrowos options?
Click to expand...
Click to collapse
No, there is no custom rom, which can be installed from the system update, all are images of the system partition, which are called GSI, which are installed by means of fastboot, or by twrp, all of them can be found here: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
drkiro said:
No, there is no custom rom, which can be installed from the system update, all are images of the system partition, which are called GSI, which are installed by means of fastboot, or by twrp, all of them can be found here: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Click to expand...
Click to collapse
interested in what makes a gsi [ generic system image ] custom rom an official vs an unofficial image given the pixel experience is listed as unofficial and aosp, arrowos and resurrectionremix offerings i've seen referenced in many places are listed as official.
i'd like to try the only official android 10 q aosp listing on my umidigi one to get off the dated android 8.1 experience and onto the more current one. This article suggests i can get twrp onto my device without bootloader unlocking it and with ability to revert back to the factory oem image setup currently running on it, if that update causes me to loose functionality or stability, using twrp recovery.
Is that a correct interpretation of the instructions in this article, and your clarifications in our exchange? I'm interested in experimenting but would like to not loose ability to go back to non-bootloader unlocked factory oem image in the event i need to exercise device hardware warranty or sell it. Thanks for your clarifications and additional insights.
myusrn said:
interested in what makes a gsi [ generic system image ] custom rom an official vs an unofficial image given the pixel experience is listed as unofficial and aosp, arrowos and resurrectionremix offerings i've seen referenced in many places are listed as official.
i'd like to try the only official android 10 q aosp listing on my umidigi one to get off the dated android 8.1 experience and onto the more current one. This article suggests i can get twrp onto my device without bootloader unlocking it and with ability to revert back to the factory oem image setup currently running on it, if that update causes me to loose functionality or stability, using twrp recovery.
Is that a correct interpretation of the instructions in this article, and your clarifications in our exchange? I'm interested in experimenting but would like to not loose ability to go back to non-bootloader unlocked factory oem image in the event i need to exercise device hardware warranty or sell it. Thanks for your clarifications and additional insights.
Click to expand...
Click to collapse
You can return, to the Originate flashing state, this image, https://community.umidigi.com/forum.php?mod=viewthread&tid=18692&extra=page=1 , can experiment with any image and return it to the original state, the pixel experience does not work with this phone, in Android Q the NFC does not work, and the videos in whastapp, do not work. Android 10 image comes without gapps, you have to flash them. If the twrp you can flash it through fastboot
Hi Folks,
I am not sure if you are aware, but there is a large list of GSI ROMs that will work on the One Max, including LineageOS 16 (Android 9)! Everything appears to work (not 100% about NFC) including the camera. Here is the complete list:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
For some of these ROMs, you will need to install Gapps:
I recommend "pico"
https://opengapps.org/
Before you begin. DO A BACKUP FIRST!
The best method, after installing TWRP, and removing encryption is this:
1. Download/extract this LineageOS version:
https://sourceforge.net/projects/an...0-20190609-UNOFFICIAL-treble_arm64_avN.img.xz
2. Download ARM64/9.0 Gapps / https://opengapps.org/
3. Do a full Wipe.
4. Install the LineageOS image first. Pick Install Image > Pick LOS image > Select system partition
5. After image is done, go back to main menu in TWRP. Pick Install > Zip > Install Gapps.
6. Reboot, Setup Google Account, and restore your cloud backup.
7. Download latest Magisk app & Zip and install.
8. Refer to _cab13_ post. Towards the bottom on getting Magisk working with GSI Roms:
https://forum.xda-developers.com/android/development/umidigi-one-max-custom-rom-modding-t3942521
In TWRP, mount the /vendor and /system partitions to be able to copy files from one directory to another.
9. At this point, d'load a root checker app to verify prompts are working. You should now have rooted LOS16!
Encryption
After starting LOS and initial boot screen pops up w encryption, and says system UI keeps stopping.
Tries to encrypt the phone.
I formatted data and installed disable encryption zip after LOS image install
Any help appreciated
I am have twrp installed but twrp does not see xxxand...m64_avN.img.xz-file.
twrp accepts only zipfiles
So what can i am do, please?
Madricks18 said:
I am have twrp installed but twrp does not see xxxand...m64_avN.img.xz-file.
twrp accepts only zipfiles
So what can i am do, please?
Click to expand...
Click to collapse
You need the `unxz` tool, and all you have to do is `unxz <file.xz>` and it will unpack it.
Alright, I have tried just about everything and keep running into the same roadblock so I am going to post here and see if someone has an idea of what is going on and how to work around it. I will outline each method used below as detailed as I can. I'm currently on 9.5.9 and looking to upgrade to .11. I'm currently on Slot B.
First Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Installed locally via System Updates
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Second Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Reboot to TWRP
4.) Flash ROM
5.) Flash TWRP installer
6.) Reboot recovery
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Third Method:
1.) Disabled all Magisk modules / themes etc
2.) Download / Install via system updates message to upgrade to .10
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. Upon rebooting to slot b I at least got a notification that the update had failed and to enter repair mode to attempt again, however, I decided to not do this yet to avoid issues with breaking root / TWRP.
-----
As you can see... I am getting to the point of rebooting to recovery in the new slot but am unable to do anything in terms of flashing ROM > TWRP > Magisk to update both slots or do anything in the new slot. I'm almost assuming a clean ROM flash, flash TWRP / Magisk might fix any issues but I want to prod you all first for a solution before I go with the nuclear option.
i.Design said:
Alright, I have tried just about everything and keep running into the same roadblock so I am going to post here and see if someone has an idea of what is going on and how to work around it. I will outline each method used below as detailed as I can. I'm currently on 9.5.9 and looking to upgrade to .11. I'm currently on Slot B.
First Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Installed locally via System Updates
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Second Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Reboot to TWRP
4.) Flash ROM
5.) Flash TWRP installer
6.) Reboot recovery
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Third Method:
1.) Disabled all Magisk modules / themes etc
2.) Download / Install via system updates message to upgrade to .10
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. Upon rebooting to slot b I at least got a notification that the update had failed and to enter repair mode to attempt again, however, I decided to not do this yet to avoid issues with breaking root / TWRP.
-----
As you can see... I am getting to the point of rebooting to recovery in the new slot but am unable to do anything in terms of flashing ROM > TWRP > Magisk to update both slots or do anything in the new slot. I'm almost assuming a clean ROM flash, flash TWRP / Magisk might fix any issues but I want to prod you all first for a solution before I go with the nuclear option.
Click to expand...
Click to collapse
First method was the right method. But don't flash the ab retention script. Flash the file in system update then go to magisk and flash to inactive slot. Reboot after that and when you boot back up flash the twrp installer in magisk and reflash root and reboot to recovery to verify its there.
joemossjr said:
First method was the right method. But don't flash the ab retention script. Flash the file in system update then go to magisk and flash to inactive slot. Reboot after that and when you boot back up flash the twrp installer in magisk and reflash root and reboot to recovery to verify its there.
Click to expand...
Click to collapse
I'm assuming you mean flash TWRP installer via Magisk once rebooted? I just want to make certain before trying again.
i.Design said:
I'm assuming you mean flash TWRP installer via Magisk once rebooted? I just want to make certain before trying again.
Click to expand...
Click to collapse
Yes
joemossjr said:
Yes
Click to expand...
Click to collapse
This didn't work. I was able to at least see my storage now and installed OTA via TWRP > TWRP installer > Magisk to update Slot B now I'm having the same issue in both slots.
there has to be something else up with your device. I would try a clean flash with magisk or try the latest magisk canary build.
I have downloaded the 11 update via OxygenUpdater using VPN (Location is set to France)
Since i diden't get the update on my real location.
Rebooted to TWRP->Flashed 11 update->Flashed TWRP->Rebooted to TWRP>Flashed Magisk>Flashed Kernel>Rebooted to System.
Everything seems to be working.
Try this simple and straight forward method,
Download the full zip 9.5.11, not the update zip but full zip,
Transfer to phone storage,
wipe only dalvik cache and data, DO NOT WIPE SYSTEM OR VENDOR, OR INTERNAL STORAGE,
Flash the oos zip,
Flash twrp, Reboot recovery,
Flash oos zip file again followed by twrp,
Reboot recovery,
Flash magisk 19.3,
Now Reboot system,
Do not click on any slots in twrp let the system select the appropriate slot, system will take some time to boot also will Reboot itself, but will boot eventually,
hope this helps, cheers.
How this helps, worked for me, I don't have T-Mobile version
i.Design said:
Alright, I have tried just about everything and keep running into the same roadblock so I am going to post here and see if someone has an idea of what is going on and how to work around it. I will outline each method used below as detailed as I can. I'm currently on 9.5.9 and looking to upgrade to .11. I'm currently on Slot B.
First Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Installed locally via System Updates
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Second Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Reboot to TWRP
4.) Flash ROM
5.) Flash TWRP installer
6.) Reboot recovery
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Third Method:
1.) Disabled all Magisk modules / themes etc
2.) Download / Install via system updates message to upgrade to .10
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. Upon rebooting to slot b I at least got a notification that the update had failed and to enter repair mode to attempt again, however, I decided to not do this yet to avoid issues with breaking root / TWRP.
-----
As you can see... I am getting to the point of rebooting to recovery in the new slot but am unable to do anything in terms of flashing ROM > TWRP > Magisk to update both slots or do anything in the new slot. I'm almost assuming a clean ROM flash, flash TWRP / Magisk might fix any issues but I want to prod you all first for a solution before I go with the nuclear option.
Click to expand...
Click to collapse
OP7PRO, stock ROM, stock kernel
This has been ABSOLUTELY working for me and how i was used doing it back in the days..
*After switching off all modules in Magisk and do a system reboot to apply this..
(Do I have to mention it's probably best, when updating to disable any password/fingerprint protection when rebooting AFTER FLASHING OTA, TWRP and Magisk in recovery?)
*I didn't use local update setting.
*What's on in developer options?
-OEM Unlock allowed
-Advanced reboot
-USB Debugging
*Don't know if having these developer settings otherwise would interfere, I just try to write it down as specific as of how i did this.
*Also: I didn't even bother looking at A/B partitioning and where to install what, please correct me if i could be wrong, but using this method worked for me and also when installing TWRP zip in recovery, the log showed A/B sloth solution success when installing.
*Not using substratum themes etc., but I want to say it's probably best to go as clean as you can anyway, since you can always go back being beautiful afterwards I guess?
So try remember where you left off being a makeup loving customiser and momentary revert being as clean as possible.. at least for maybe 20 minutes okay?
How I did it:
-Download the OTA update zip on your phone (full update file zip just shy of 2 Gb) using oxygen updater app in Google playstore.
(Don't install the systemsoftware zip from the oxygen updater once downloaded), you're going to install the systemsoftware.zip in TWRP recovery as opposed to update via Magisk to install the new systemsoftware).
-Download TWRP (INSTALLER!!) have this ZIP on phone (Find it by reading some posts about TWRP Installer zip or use link below)
*I used: twrp-installer-3.3.1-4-guacamole.zip
https://dl.twrp.me/guacamole/ (for TWRP zip)
-Download Magisk zip
*I used: Magisk-v19.3.zip
(So far 3 zip files, have them somewhere pretty obvious on your phone)
-Boot into recovery (I did this by using this option in Magisk manager)
Then:
-Flash the update OTA ROM.zip (just shy of 2Gb)
*DON'T REBOOT*!!!!
-Go back in TWRP recovery menu, Flash TWRP Installer zip
-Still in TWRP recovery menu go back, Reboot to recovery
-Back in TWRP, flash Magisk zip
-Clear Dalvik cache (not sure if this is actually still needed)
-Reboot system normally, enable Magisk modules you want, reboot system...
Updated to 9.5.10 works
Updated to 9.5.11 works
Updated to 10.0.0 works
I can't find the full zip for 9511 anywhere
joemossjr said:
there has to be something else up with your device. I would try a clean flash with magisk or try the latest magisk canary build.
Click to expand...
Click to collapse
I ended up having to reformat to deal with the encryption issue. After reformatting I was able to boot to slot b and am at .11 now!
I'm really hoping this ordeal fixed whatever the problem was so that future OTA's aren't this much of a headache. I'll keep the tips in mind. I'm just glad to have a working device at .11 with root even if I have to re-install all of my apps etc.
virtyx said:
I can't find the full zip for 9511 anywhere
Click to expand...
Click to collapse
It's live on XDA frontpage.
---
I think best update method is get full zip, do local upgrade, flash Magisk after OTA on inactive slot, reboot, flash TWRP installer via magisk and reflash magisk (direct method). Reboot and zero issues.
smariob said:
It's live on XDA frontpage.
---
I think best update method is get full zip, do local upgrade, flash Magisk after OTA on inactive slot, reboot, flash TWRP installer via magisk and reflash magisk (direct method). Reboot and zero issues.
Click to expand...
Click to collapse
just came up now
what i normally do is flash full zip
reboot
then reboot fastboot and boot twrp, then flash twrp then magisk.
i like the OS boot first time without twrp or magisk, just habit i guess
everything working fine, nightscape also
EDIT:
i think SWAP has been turned off in 9.5.11
it no longer displays in ElementalX app (with stock kernel)
What did I do wrong?
Someone help me shed some light. I'm not sure what I did wrong while updating using magisk.
So this is the steps I did.
1. Installed the OTA update
2. In magisk went to install to inactive slot (after OTA)
3. Then it went through the motions and restarted.
At the screen where you put the password in it shut down and then went to the stock recovery. Tried again, same thing. So after some panicking I did this.
Reflashed twrp via computer
Flashed the uninstall of magisk
Flashed twrp zip
Restarted it and everything is fine now. I just had to re-flash the modules which was quite annoying.
So what did I do wrong? Have I buggered up anything to do with the inactive slots or partitions?
I don't know why people have such difficulty?
1. Get the full zip via Oxygen Updater or some other method.
2. Do a local install vis the settings. DO NOT REBOOT.
3. Install Magisk via the "Install after OTA" from Magisk Manager.
4. Reboot
5. You will now have the slot rooted that you updated.
6. Run the local install again. This will install to the other slot. It will fail the first attempt. Do it again.
7. Install Magisk via the OTA option and reboot.
You have now updated both slots and rooted them.
If you would like TWRP or custom kernels, follow those instructions.
If you install TWRP, you MUST install Magisk in the same slot or you will get a boot loop for that slot.
That is the reason why I keep both slots at the same OS level and rooted with TWRP installed.
What country guys you are from that you are getting update? Im in USA and still got nothing.
netgar said:
What country guys you are from that you are getting update? Im in USA and still got nothing.
Click to expand...
Click to collapse
Using oxygen updater, try disabling all.mods before checking for update. Or in oxygen updater settings, select advanced mode, and see if update is available.
Krsmqn said:
Using oxygen updater, try disabling all.mods before checking for update. Or in oxygen updater settings, select advanced mode, and see if update is available.
Click to expand...
Click to collapse
By mods you mean magisk modules?
Update
Advanced option did the job. Updated with magisk and few magisk modules + few substratum themes.
Thx
netgar said:
By mods you mean magisk modules?
Update
Advanced option did the job. Updated with magisk and few magisk modules + few substratum themes.
Thx
Click to expand...
Click to collapse
Yeah, meant magisk modules, sorry. But looks like you got it anyway. ?
All update methods to 11 failed.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
This thread is dedicated to newbies and rooting, so if you're familiar with the whole procedure, you're done
Just ask questions about every step and you'll receive help!
Downloads
TWRP Installer ZIP and TWRP IMG for Android 9/10: https://forum.xda-developers.com/oneplus-7/development/recovery-unofficial-twrp-recovery-t3932943
TWRP for Android 11(including instructions, thank's to @Nebrassy ): https://forum.xda-developers.com/t/recovery-11-unofficial-teamwin-recovery-project.4289455/
TWRP Installer ZIP = For example twrp-3.4.0-10-guacamole-unified-installer-mauronofrio.zip
TWRP IMG = For example twrp-3.4.0-10--guacamole-unified-Q-mauronofrio.img
Check for Pie or Q TWRP IMG! If you have Android Pie, choose Pie TWRP IMG, if you have Android Q, choose Q TWRP IMG.
The TWRP Installer ZIP works on Android Pie(9)/Q(10)
Magisk ZIP: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Hints
If you need to update TWRP or Magisk, always keep older versions of both in hand(Magisk canary or beta may have issues)
Remove your lockscreen protection which also removes encryption to prebvent mounting issues within TWRP
Before proceeding
Your Windows PC should already recognized your device with the USB cable
Use an USB cable provided with the phone
Make sure your Windows Explorer is set up to have file extensions enabled to avoid file name issues
This process will FORMAT/WIPE/DELETE your internal storage and every file of your phone, so please back it off your device at first!
Also keep a boot.img from your current system in place if anything went wrong so you can flash it via fastboot, see "Rooting without TWRP" for how to get it.
Rooting with TWRP (Android 9/10)
Steps for unlocked bootloader with TWRP AND Root(Magisk)
1. Follow this guide to unlock your Oneplus 7 bootloader(wipes everything on your device, works for OP7 pro and OP7): https://forum.xda-developers.com/showpost.php?p=79741564&postcount=2.
2. Your phones bootloader is now unlocked, leave the phone plugged to your PC
3. Make sure you have enabled USB-Debugging and Advanced Reboot under developer options(see step 1 how to enable it all) again after the first boot of the wiped device, since this gets reset
4. Copy the latest "TWRP installer ZIP" and "Magisk ZIP" to the phones internal storage.
5. Copy the "TWRP IMG" to the "platform-tools" folder from step 1.
6. Open command window or PowerShell window again if you did not closed it before within the "platform-tools" folder from step 1
7. Type
Code:
adb devices
to see if your device is connected and recognized sucessfully by your PC.
8. Type
Code:
adb reboot bootloader
to reboot to fastboot mode.
9. Type
Code:
fastboot boot recoveryimgfilename.img
to temporary boot TWRP, where recoveryimgfilename.img is the name of your downloaded TWRP *.img file, so watch your file name!.
10. Enter your screen lock PIN within TWRP if you have set it up before.
11. Allow modifications.
12. Now you have temporary booted twrp recovery. To make it stick permanently you need to flash the "TWRP installer ZIP" from your phones storage from step 4.
13. Hit "install" and navigate to the "TWRP installer ZIP" file and select it for installation(dont boot the system now!).
14. Go back and flash "Magisk ZIP" the same way as for TWRP Zip otherwise your device will not boot!
15. Thats all, you can unplug the USB cable and boot the device to your system. Your device is now bootloader unlocked with TWRP and Magisk:highfive:
Steps for unlocked bootloader with TWRP WITHOUT Root(Magisk)
1. Follow this guide to unlock your Oneplus 7 bootloader(wipes everything on your device, works for OP7 pro and OP7): https://forum.xda-developers.com/showpost.php?p=79741564&postcount=2.
2. Your phones bootloader is now unlocked, leave the phone plugged to your PC
3. Make sure you have enabled USB-Debugging and Advanced Reboot under developer options(see step 1 how to enable it all) again after the first boot of the wiped device, since this gets reset
4. Copy the latest "TWRP IMG" to the phones internal storage.
5. Copy the latest "TWRP IMG" to the "platform-tools" folder from step 1.
6. Open command window or PowerShell window again if you did not closed it before within the "platform-tools" folder from step 1
7. Type
Code:
adb devices
to see if your device is connected and recognized sucessfully by your PC.
8. Type
Code:
adb reboot bootloader
to reboot to fastboot mode.
9. Type
Code:
fastboot boot recoveryimgfilename.img
to temporary boot TWRP, where recoveryimgfilename.img is the name of your downloaded TWRP *.img file, so watch your file name!.
10. Enter your screen lock PIN within TWRP if you have set it up before.
11. Allow modifications.
12. Now you have temporary booted twrp recovery. To make it stick permanently you need to flash the "TWRP IMG" from your phones storage from step 4
13. Navigate to advanced menu within TWRP, click on "Install Recovery Ramdisk" and select the "TWRP IMG". This will patch the boot image which does Magisk otherwise.
14. Thats all, you can unplug the USB cable and boot the device to your system. Your device is now bootloader unlocked with TWRP:highfive:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Rooting without TWRP (Android 9/10/11)
Also useful to get stock recovery and kernel --> Recovery is within boot.img on A/B devices like OP7
Refer here for unlocking the bootloader.
1. Download the payload dumper tool to your PC from here and extract it
2. Download the FULL OxygenOS Rom zip(The version your phone is running) and extract the payload.bin
3. Put payload.bin to "payload_input" folder o the extracted tool
4. Run payload_dumper.exe from the tool's folder
5. Extracted img files are in "payload_output" folder
6. Now you have your own boot.img for your Rom
7. Copy it to your phone
8. Patch the boot.img with Magisk directly on your device: Magisk Manager App -> hit install after your Magisk version -> hit "Select and Patch a file"
9. Copy the patched boot.img (it should be in the Download folder of your device named something like "magisk_patched-22100_bjjRn.img") back to your PC
10. Reboot your device to fastboot
11. Flash the patched magisk_patched-22100_bjjRn.img
Code:
fastboot flash boot_a magisk_patched-22100_bjjRn.img
fastboot flash boot_b magisk_patched-22100_bjjRn.img
12. Reboot your device. Now you have your phone rooted without the need of TWRP (Check with Magisk Manager App)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Update your rooted OxygenOS (Android 9/10)Steps for UPDATE OxygenOS via OTA and keep unlocked bootloader, TWRP, Root(Magisk)
1. [OPTIONAL, but highly recommended]Backup everything in case of issues!
2. Go to Magisk Manager App and uninstall all modules
2.1 [Optional]: For some modules(read those instructions) you should do an reboot now, then proceed
3. Go to Android settings -> system -> system update and hit "Download & Install Now", don't reboot yet!
4. (not for Android 11)Flash "TWRP ZIP" within Magisk Manager App like a Module: Magisk Manager App -> Menu -> Modules "+". This installs TWRP to both a/b partitions.
5. Install Magisk via Magisk Manager App again: Magisk Manager App -> hit install after your Magisk version -> hit "install to inactive slot"
6. Reboot your device
7. Reinstall your Magisk Modules(maybe a reboot is necessary)
Your device is now updated via OTA and you keep TWRP and Root:highfive:
Steps for UPDATE OxygenOS via local upgrade and keep unlocked bootloader, TWRP, Root(Magisk)
1. [OPTIONAL, but highly recommended]Backup everything in case of issues!
2. Download the full rom zip file and place it into the root folder of your storage(/storage/emulated/0)
3. Go to Magisk Manager App and uninstall all modules
2.1 [Optional]: For some modules(read those instructions) you should do an reboot now, then proceed
4. Go to Android settings -> system -> system update and hit gear icon top right -> local upgrade, don't reboot yet!
5. (not for Android 11)Flash "TWRP ZIP" within Magisk Manager App like a Module: Magisk Manager App -> Menu -> Modules "+". This installs TWRP to both a/b partitions.
6. Install Magisk via Magisk Manager App again: Magisk Manager App -> hit install after your Magisk version ->hit "install to inactive slot"
7. Reboot your device
8. Reinstall your Magisk Modules(maybe a reboot is necessary)
Your device is now updated via local upgrade and you keep TWRP and Root:highfive:
If you have any issues, just feel free to ask!
@strongst you should maybe write in your guide that magisk flash is a must! Without phone won't boot if it's stock.
There are a lot of people who wanna flash TWRP without magisk. I don't know why they do that it makes no sense for me.
Kollachi said:
@strongst you should maybe write in your guide that magisk flash is a must! Without phone won't boot if it's stock.
There are a lot of people who wanna flash TWRP without magisk. I don't know why they do that it makes no sense for me.
Click to expand...
Click to collapse
I made it a little bit more clear, thanks, that's an common issue across several devices and requested often enough
Thank you for the quick tutorial. For me it looks very similar to the procedure with the OnePlus 5, am I right?
Does this indicate, that an EFS Backup is also to create the same way? https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
BR
Axel
AxelM said:
Thank you for the quick tutorial. For me it looks very similar to the procedure with the OnePlus 5, am I right?
Does this indicate, that an EFS Backup is also to create the same way? https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
BR
Axel
Click to expand...
Click to collapse
There's something different after unlocking the bootloader(which is the same). Twrp and magisk installation is different due to treble.
For EFS you can backup with twrp or local terminal
dd if=/dev/block/sdf2 of=/sdcard/modemst1.bin bs=512
Thanks for the guide, my OnePlus 7 came with 9.5.5 and I want to clean flash to the latest 9.5.8. I have already unlocked the bootloader, boot into TWRP and installed TWRP, are these the correct steps to flash 9.5.8 as I'm confused with the A/B partition?
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip
3. Flash kernel and Magisk or the other way round?
Camack said:
Thanks for the guide, my OnePlus 7 came with 9.5.5 and I want to clean flash to the latest 9.5.8. I have already unlocked the bootloader, boot into TWRP and installed TWRP, are these the correct steps to flash 9.5.8 as I'm confused with the A/B partition?
1. Wipe data, cache, system
2. Flash 9.5.8 signed flashable zip
3. Flash kernel and Magisk or the other way round?
Click to expand...
Click to collapse
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip with current twrp
3. Flash twrp installer zip with current twrp
4. Flash magisk zip with current twrp
5. Reboot
Make sure not to FORMAT internal data, otherwise you wipe the files you want to flash as it formats sdcard
strongst said:
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip with current twrp
3. Flash twrp installer zip with current twrp
4. Flash magisk zip with current twrp
5. Reboot
Make sure not to FORMAT internal data, otherwise you wipe the files you want to flash as it formats sdcard
Click to expand...
Click to collapse
Thanks, so I boot into TWRP first and then do step 1 and 2? Also, which step should I flash custom kernel?
Camack said:
Thanks, so I boot into TWRP first and then do step 1 and 2? Also, which step should I flash custom kernel?
Click to expand...
Click to collapse
You need to do all steps. I recommend to flash the custom kernel when you've sucessfully booted the device at first.
Hi, a new OP7 User here. I wanted to know how can i keep my data decrypted? i have installed TWRP but i want to decrypt my data and also keep it the same after updated newer updates. Is it possible? I was able to do it on my OP3T, so wanted to know if its possible on OP7 as well
murti52 said:
Hi, a new OP7 User here. I wanted to know how can i keep my data decrypted? i have installed TWRP but i want to decrypt my data and also keep it the same after updated newer updates. Is it possible? I was able to do it on my OP3T, so wanted to know if its possible on OP7 as well
Click to expand...
Click to collapse
This should work https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
strongst said:
This should work https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Click to expand...
Click to collapse
I think i messed up real bad, now when iam booting the phone, a message comes, your device is corrupt. It can't be trusted and will not boot.
murti52 said:
I think i messed up real bad, now when iam booting the phone, a message comes, your device is corrupt. It can't be trusted and will not boot.
Click to expand...
Click to collapse
That message is the bootloader unlocked warning and comes every time as soon as you unlocked the bootloader.
Flashing DM verity patch can only be done when you format internal storage which wipes everything of your internal storage. You can't "decrypt" your existing data permanently with this.
strongst said:
That message is the bootloader unlocked warning and comes every time as soon as you unlocked the bootloader.
Flashing DM verity patch can only be done when you format internal storage which wipes everything of your internal storage. You can't "decrypt" your existing data permanently with this.
Click to expand...
Click to collapse
No, this is not the same, i can't even go to fastboot or anything, it's hardbricked.
murti52 said:
No, this is not the same, i can't even go to fastboot or anything, it's hardbricked.
Click to expand...
Click to collapse
If you have really bricked it: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
strongst said:
If you have really bricked it: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
Click to expand...
Click to collapse
Sadly it didn't worked, as phone doesn't gets detected on pc, keeps on rebooting. Gave it to service center and they are also not able to solve it ??. So a replacement for me ?
Edit : i think the force decryption was the culprit. When i rebooted, system was crashing. Op3t had its specific force decrypt file, not a general one, So i think as the development moves forward, op7 will also get it's own. Hoping the best ?
murti52 said:
Sadly it didn't worked, as phone doesn't gets detected on pc, keeps on rebooting. Gave it to service center and they are also not able to solve it ??. So a replacement for me ?
Edit : i think the force decryption was the culprit. When i rebooted, system was crashing. Op3t had its specific force decrypt file, not a general one, So i think as the development moves forward, op7 will also get it's own. Hoping the best ?
Click to expand...
Click to collapse
This file also works on OP7 pro, so it should also work on normal op7. I think the issue comes from something other.
strongst said:
This file also works on OP7 pro, so it should also work on normal op7. I think the issue comes from something other.
Click to expand...
Click to collapse
Then there must be some issue with my flashing sequence. Btw, The service centre repaired the issue and i have rooted it and using bluespark with stock rom. I'll give the zip another try later on when a new update comes. Thanks for the help
I believe the default file system is ext4, is there any benefits changing it to f2fs?
Jacckz said:
I believe the default file system is ext4, is there any benefits changing it to f2fs?
Click to expand...
Click to collapse
A good and quick overview and comparison with oneplus 7 pro https://sparrowsnews.com/2019/08/13/difference-between-f2fs-and-ext4-file-system/