Hello. I use Micromax Canvas Doodle A111. Phone specs are as follows-
OS version- 4.1.2 (JB)
Chipset- Qualcomm MSM8225Q Snapdragon
CPU- Quad-core 1.2 GHz Cortex-A5
Ram- 512Mb
I have rooted my phone (CWM is not installed yet). Removed all the bloatwares. After rooting i was able to go into recovery mode. But after a while phone just won't go into recovery. Tried everything but it just wont go into recovery, only a black screen would turn up while my led showed blue colour. However normal booting was working and phone worked well.
Later on, i factory reset my phone. Before reseting, i took a complete backup of phone (settings backup as well) with help of Titanium Backup Pro 5.1... After reseting, i restored the settings and other stuff using TB. After everything was restored, the TB asked me to reboot my phone for restored settings to take into effect. So i selected reboot option from the TB notification. Phone powered off normally. But when it started up, it just got stuck at the Canvas Logo. No matter what i tried, whichever combination i used, it always stuck at canvas logo and no buttons worked after that. Led was also not glowing. I had to manually remove battery to power off the device. (Recovery mode combination worked, but as usual i can only see a black screen with my led showing blue colour).
I scanned internet for my problems but couldn't find a thing. Finally i took my phone to mmx customer care. They said the motherboard needs to be replaced. The cost is very high . 4.5k for replacing motherboard.
So my question is as follows- "Is there any solution for my problem? If not and i must change my motherboard; then can i change it at home. Where can i get a motherboard for my model?"
Any help is appreciated...
P.S: I rooted my phone using SRSone click root. The rooting was successful and showed no problems afterwords.
Hi,
You could follow this guide, and ask any questions you have regarding the guide here too ...
http://forum.xda-developers.com/can...guide-how-to-unbrick-micromax-canvas-t2901983
Good luck!
---------- Post added at 11:04 AM ---------- Previous post was at 11:03 AM ----------
Oh, if nothing works , as you said, the service center may be your only option.
Related
I am using Micromax Canvas 2+ A110Q with a v2 stock ROM.
I rooted my phone and installed CWM v5.5.0.4 and I have SuperSU installed too.
I tried to install 2 custom ROMs and I ended up with a black screen both the times after locking the phone once.
The phone boots up normally as expected with the new ROM but screen goes black after locking it once.
The phone functions normally. For eg. Whenever someone calls, I randomly try to pick the phone(ofcourse with a black screen).
I can hear what the person is saying but the screen continues to remain blank.
Help me.
NOTE: I am a total newbie to the droid world. It took me 2 days to root my phone and install a custom ROM (LOL)
This is my first post on this forum.
I attached some result by Root Checker Pro. Might help.
Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
kleptofox said:
Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
Click to expand...
Click to collapse
Have you tried reflashing the original ROM using Flash Tools (everything from Needrom ...)?
Me too
I also did a thing like this. I rooted the phone and it workd, than I tryed to install xPosed, it robooted, but the screen turned black. Than I started the phone in recovery mode and tried a factory reset, it turned black and now I think it's bricked. When i put off and put on the battery it makes a short logo animation and than turns black.
I tried with sp flah tool but it doesn't start or not recognise the phone, the driver are installed but with my pc and my laptop it doens't work. I hear the sound of when I connect and disconnect the phone, but apart from that it's dead. Please help me!
solved THL t11, hangs at black screen after factory reset in recovery mode
Hi,
I had the same problem with my unrooted t11. I just tried another rom and it solved the problem. The rom I used is THL_T11_140401_MNSop.cz, google it. I can not post the link as I am new to this forum...
Good luck!
Hello guys,
I'm here for the first time and I would like to hear your opinions on what to do with my N9006 mt6589 which has been bricked. I'll explain what happened. While I was using my phone normally it started to have a strange behaviour, error notifications popped up, couldn't write messages and then suddenly it shut down. Tried to charge it, and still couldn't turn it on. As my battery was weak I changed it and thought that problem will be solved. When I inserted new battery, my phone was still dead. No LED when chargin, no light when pressing Power button, nothing, completely dead. I knew that it was hard bricked. As I'm not a newbie in android world, I managed to install drivers and to make it discoverable by PC as MediaTek Preloader...Only thing that I knew about this clone is model SM-N9006 which is appearing while turning it on (on sticker under battery I have N9002, however I searched for N9006 ROMs to flash on). I don't know any other info about this phone as I recieved it as gift few months ago and I didn't modified anything on it. Don't have back-up. After trying to flash about 20 ROMs I found one which worked for me. But, my problem does not stop here. My phone turned on but stayed awake for few seconds than suddenly shut down again. I entered in Factory Mode which has all chinese words and managed to delete eMMC!!! Oh yes, I made that terrible mistake. Now I'm unable to turn it on again. In CWM eMMC is not mounting, as well as data, system and cache. MTK Droid Tool discovered my phone and I got informations that you can see in attached picture INFO.jpg.
After that I realized that my phone model is A202_mula_64 which I think stands for N9006 MAX. However I didn't succeded in unbricking my phone because no ROM works as I deleted MMC. With this iBaby888 ROM installed on phone now when I check Info in Factory Mode I recieve info that you can see in attached picture PB180003.jpg
Can anyone tell me what to do now? Which ROM to flash and how to repartition MMC and sd-ext??? Do you think that MTK Droid Tool is reliable and discovers right info? If yes, then I have n9006 Max = A202_mula_64.
Sorry for such a long post but I need your help urgently.
PS. Forgot to mention that my phone is dual sim and I can access CWM.
Your help is highly appreciated!!! Best!
Any ideas on what to do guys??
Hello everyone,
Few months back i rooted my tab iball 7334i which is based on mt6577.
3 days back i converted some system app lik ibn live and cricked score from system app to user app with the help of link2sd and also made supersu system app.It asked to reboot system so i did that after that i got error "SYSTEM UUID INCONSISTENT.....U NEED TO PARTITION " and option called "I AM FEELING LUCKY " to proceed so i did recearch on google and got answer it needs to reset.
After that i went cwm recovery and clicked on wipe data... but it took one hour and i noticed it was stuck but still i left for whole night still no progress so i reset the tab and tried to turn on but it got stuck at iball logo.
Now again i went to cwm recovery and i tried to do again but still same
And also i had backup of my rooted rom through mediatek tools.
So through flash tools i flashed my tab using spflash tool by selecting the scatter file and deselecting the last two option i.e userdata and cache
after flasing ,the tab was again stuck at logo so i tried with all my 3 backups and flashed but still same
so this time i flashed recovery and converted to stock recovery
still hanging at logo but this time it suddenly went in to process where green android robot was flat ,something was going on, .progress so i left the tab for whole night but in morning still it was running so i resetted the tab and all of sudden it went dead..i made it charge and tried everything but no power
After again i did research found Mr yuweng post
http://forum.xda-developers.com/showthread.php?t=1943442
I went into meta mode and flashed rom so to utter surprise the tab woke up and flash was succesfull but again hanging at iball logo.
so this time i went to recovery but it had same stock recovery although after flashing also so again what i did that i had backup of userapp before root so i tried to restore through stock recovery but in process still it hanged as no progress was shown so again i resetted the tab and it went dead.
So i Tried several time to go in meta mode but not succesfull but i kept on trying so again tab rose from dead mode and presently its charging.SO MY TAB IS AWAKE
Now again i did research on youtube so it was shown that first i need to flash preloader by putting checkmark on it and then i need to flash whole rom but still not sure
So any expert reply
What i have
backup of titanium backup including update.zip
i have stock recovery presently in tab
and i had 3 backup of rooted rom
and also before rooting i had backup of userdata by default back up provided in android
My tab details
Device SPECIFICATION IBALL 7334i
CPU h/w : MT6577
CPU Model :ARM CORTEX A9 GHZ DUAL CORE PROCESSOR
CPU Frequency: 250.25 ~ 1001.0 MHz
So now i can say that my tab is charging and i have not tested weather i can go in recovery or not
what i need to flash and how as it is not booting well it is softbricked
And i dont understand why it is not working after it is flashed with backup rom
So any help will be highly appreciate as i think it is last stage of my tab please help
My internal memory is 16 gb so does it make sense that it takes long hours to format?????
Now again what i did that flashed my tab with stock rom and this time 1st put checkmarked on preloader then flashed and then on DSP_BL and then flashed and then recovery then flashed and whole except for cheked mark preloader and dsp and flashed that is first 2 option and last 2 option uncheked
to strange ,after flashing when tab was red triangle with exclamation came and then after sometime again rebooted and still at iball logo
Any expert pls help
Guys I really need all your help on this one.
I am having a Xolo A600 with MT6572 chipset and 512 MB RAM and it randomly stopped charging, so I gave my phone to the repair guy and although he fixed the charging issue by replacing the charging connector, but after that my phone became useless.
Whenever I try to power up my device it flashes XOLO logo on screen and after that it boots up normally, but then whenever I try to touch any icons on screen it randomly reboots, even touching the capacitive touch button does the same thing.
At first I thought that my display may be the culprit and so I tried touching screen in the test mode and nothing happened, then I realized that its the software fault so I tried reflashing the whole device using SP flashing tool and then too I wasn't sure that I got successful or not coz that restarting issue was still there.
Then I tried to unlock the bootloader of my device from the fastboot mode and all it is showing me is just 3 dots in the very next line of fastboot oem unlock.
I don't think that the developer options and debugging mode was enabled on enabled on my device and maybe that's the issue i don't know.
All I want is my device back from dead and that's it.
I am tired of each and everything and I just want to install a custom recovery on my device so that I can install a custom rom on it, or in my case stock ROM will also work.
Thanks in advance...
Star295 said:
Guys I really need all your help on this one.
I am having a Xolo A600 with MT6572 chipset and 512 MB RAM and it randomly stopped charging, so I gave my phone to the repair guy and although he fixed the charging issue by replacing the charging connector, but after that my phone became useless.
Whenever I try to power up my device it flashes XOLO logo on screen and after that it boots up normally, but then whenever I try to touch any icons on screen it randomly reboots, even touching the capacitive touch button does the same thing.
At first I thought that my display may be the culprit and so I tried touching screen in the test mode and nothing happened, then I realized that its the software fault so I tried reflashing the whole device using SP flashing tool and then too I wasn't sure that I got successful or not coz that restarting issue was still there.
Then I tried to unlock the bootloader of my device from the fastboot mode and all it is showing me is just 3 dots in the very next line of fastboot oem unlock.
I don't think that the developer options and debugging mode was enabled on enabled on my device and maybe that's the issue i don't know.
All I want is my device back from dead and that's it.
I am tired of each and everything and I just want to install a custom recovery on my device so that I can install a custom rom on it, or in my case stock ROM will also work.
Thanks in advance...
Click to expand...
Click to collapse
Greetings and welcome to xda, this thread here should be able to help you
http://forum.xda-developers.com/android/help/-t3145500
Good Luck
Sawdoctor