Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
migimantas said:
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
Click to expand...
Click to collapse
I have found that my emmc has the insane chip bug. The phone boots normally with cyanogen mode 11 but then it goes to sleep mode or I press the power button the screen goes black and the phone restarts. I have tried siyah kernel to try dual boot but then I flash siyah I cant get into recovery.
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
twinsen.net said:
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
Click to expand...
Click to collapse
I have already tried this but with the stock rom phone boots but at the section where I have to chose language I jus freezes stops working
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
twinsen.net said:
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
Click to expand...
Click to collapse
Take it straight away to the official service centre
Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
kleptofox said:
Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
Click to expand...
Click to collapse
Have you tried reflashing the original ROM using Flash Tools (everything from Needrom ...)?
Me too
I also did a thing like this. I rooted the phone and it workd, than I tryed to install xPosed, it robooted, but the screen turned black. Than I started the phone in recovery mode and tried a factory reset, it turned black and now I think it's bricked. When i put off and put on the battery it makes a short logo animation and than turns black.
I tried with sp flah tool but it doesn't start or not recognise the phone, the driver are installed but with my pc and my laptop it doens't work. I hear the sound of when I connect and disconnect the phone, but apart from that it's dead. Please help me!
solved THL t11, hangs at black screen after factory reset in recovery mode
Hi,
I had the same problem with my unrooted t11. I just tried another rom and it solved the problem. The rom I used is THL_T11_140401_MNSop.cz, google it. I can not post the link as I am new to this forum...
Good luck!
Hey guys, I've got a Kyocera Brigadier and I decided to change the runtime from Dalvik to ART. Now the phone is stuck on loadscreen and I don't know how to fix it. The phone is rooted using the KingRoot app, but I don't know if that would help in any way.
Please help me guys!
Similar Issue
I am have a very similar issue, I also rooted my Brigadier with Kingroot and all went well. However, I attempted to flash the Xposed Framework onto it using Flashify. After doing such it got stuck in a bootloop, I was able to fix that problem by booting into fastboot mode and using fastboot to push stock firmware back onto my device. However now I have an even bigger problem where my phone boots up to the Powered by Android screen and then to the Kyocera screen, however instead of continuing to boot to the Verizon Wireless screen and then into the phone, it gets stuck at a black screen. I have tried waiting for hours and nothing at all happens, also I can no longer seem to boot into fastboot mode or in other words the Powered by Android screen with the little 1 in the top left corner of the screen. Fastboot nor ADB recognizes the device when plugged into my computer, as neither list anything when ran. Please help, I don't want to have to pay and end up sending my phone into Verizon to be unbricked.
Ornias Abezethibou said:
I am have a very similar issue, I also rooted my Brigadier with Kingroot and all went well. However, I attempted to flash the Xposed Framework onto it using Flashify. After doing such it got stuck in a bootloop, I was able to fix that problem by booting into fastboot mode and using fastboot to push stock firmware back onto my device. However now I have an even bigger problem where my phone boots up to the Powered by Android screen and then to the Kyocera screen, however instead of continuing to boot to the Verizon Wireless screen and then into the phone, it gets stuck at a black screen. I have tried waiting for hours and nothing at all happens, also I can no longer seem to boot into fastboot mode or in other words the Powered by Android screen with the little 1 in the top left corner of the screen. Fastboot nor ADB recognizes the device when plugged into my computer, as neither list anything when ran. Please help, I don't want to have to pay and end up sending my phone into Verizon to be unbricked.
Click to expand...
Click to collapse
I have the same problem. I bought a new a Brigadier that was on 4.4.2. I rooted with Kingroot ran update and now my phone will not boot past Kyocera screen. It goes black with the back light on. Did factory wipe and still nothing. I am shocked that KK has killed yet another phone of mine. I very much dislike KK ROM. What did you find out?
Hey guys,
I have an issue with my Iron Pro, basically I turned off the phone one day, went to turn it back on and the UMI logo showed for 2 or so seconds and the device turned off again. I can access the bootloader but the same issue occurs when selecting recovery. I have tried reflashing the device several times with different roms (custom and stock) using SPFT with no success. However, after leaving the battery unplugged for a long period (3 or 4 days?) of time the device booted so I thought it was all fixed, went to restart and... guess what happened. I can't use fastboot to reflash because I don't have a custom recovery nor when I do flash one it still doesn't work. I believe it may be a hardware fault at this point. Any help or advice would be appreciated. Cheers
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
try flashing the stock rom again using miflashtool.
2D1fferent said:
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
Click to expand...
Click to collapse
I had this situation too 2 days ago after installing Magisk 24.3 , CusRom DF latest, Firmware 12.5.7. What i did was hit the power button for a sec immediately,and my device was back to normal untill now.
Antonio7489 said:
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
Click to expand...
Click to collapse
How is it now after awhile?
groovybanana21 said:
How is it now after awhile?
Click to expand...
Click to collapse
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Antonio7489 said:
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Click to expand...
Click to collapse
I see. I use this device since october last year, i never face any bug except that glitch screen even for a second,that gave me mini heart attack, lol..
So yes i flash stock MIUI13 again and stay on stock till now.
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Bumaye961 said:
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Click to expand...
Click to collapse
HELP
Bumaye961 said:
HELP
Click to expand...
Click to collapse
You should flash MIUI again with Mi Flash Tool , if it still happens you should flash a custom rom,if you get the same result go to a repair center.
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, safemode doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
I recommend to flash stock rom through fastboot mode.
Bambo. said:
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, fastboot doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
Click to expand...
Click to collapse
That's indicates your mainboard is broken. claim your warranty for mainboard replacement or new phone replacement(in some region)
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Bambo. said:
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Click to expand...
Click to collapse
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Atul10 said:
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Click to expand...
Click to collapse
try charging it overnight and retry even if it does not respond to charging, i did that too when mine stopped powering on although it only charged around 41%
Antonio7489 said:
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Click to expand...
Click to collapse
i know it might not be a softbrick but the charger case worked for me it might be a coincidence too because it is random most of the time it boots up randomly after restarting several times, when it does it can work for as little as some minutes or a couple of hours, to me it seemed like the rom got corrupted or something, im not an expert.
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
abdalla 22564 said:
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
Click to expand...
Click to collapse
No real answer till now ðŸ«