Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
kleptofox said:
Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
Click to expand...
Click to collapse
Have you tried reflashing the original ROM using Flash Tools (everything from Needrom ...)?
Me too
I also did a thing like this. I rooted the phone and it workd, than I tryed to install xPosed, it robooted, but the screen turned black. Than I started the phone in recovery mode and tried a factory reset, it turned black and now I think it's bricked. When i put off and put on the battery it makes a short logo animation and than turns black.
I tried with sp flah tool but it doesn't start or not recognise the phone, the driver are installed but with my pc and my laptop it doens't work. I hear the sound of when I connect and disconnect the phone, but apart from that it's dead. Please help me!
solved THL t11, hangs at black screen after factory reset in recovery mode
Hi,
I had the same problem with my unrooted t11. I just tried another rom and it solved the problem. The rom I used is THL_T11_140401_MNSop.cz, google it. I can not post the link as I am new to this forum...
Good luck!
Related
Hello, I will try to explain how I got myself into my current situation which is kinda helpless and it ends up with the SGS II Logo on screen.
I rooted my phone - no problem
Flashed an Insecure Kernel - no problem
Flashed - CWM - no problem
Then I tryed to put the Ressurecion ICS mode.
Started CWM mode, wiped all data but for some reason soon afterwards my phone
turned off. When I started it again it always ended up at samsung logo screen :/
I can put it in download mode. I tryed to flash roms, with or without pit files.
When I do so I get this screen like terminal with many signs like "failed to load booth catche" etc, unable to mount,etc. Then I get the option to either reboot,to wipe data catche or factory reset. No matter what I choose I always end up at logo screen. Please,I beg of you help me !!
SinisterHatred said:
Hello, I will try to explain how I got myself into my current situation which is kinda helpless and it ends up with the SGS II Logo on screen.
I rooted my phone - no problem
Flashed an Insecure Kernel - no problem
Flashed - CWM - no problem
Then I tryed to put the Ressurecion ICS mode.
Started CWM mode, wiped all data but for some reason soon afterwards my phone
turned off. When I started it again it always ended up at samsung logo screen :/
I can put it in download mode. I tryed to flash roms, with or without pit files.
When I do so I get this screen like terminal with many signs like "failed to load booth catche" etc, unable to mount,etc. Then I get the option to either reboot,to wipe data catche or factory reset. No matter what I choose I always end up at logo screen. Please,I beg of you help me !!
Click to expand...
Click to collapse
Have you tried returning it to stock with a one-click return to stock ? you will lose your root permissions but they are easy to get back lol
I havent tryed it. Isnt it just for nexus too ? And I cant enter my phone so I could just USB debugging :X
SinisterHatred said:
I havent tryed it. Isnt it just for nexus too ? And I cant enter my phone so I could just USB debugging :X
Click to expand...
Click to collapse
yea alot of samsung phones have one click return to stock
you just need to get it into download mode (probably by holding volume down and power at the same time then connecting ur usb i can provide links just PM me
Hi everyone, I want to know what this could be, my phone was just rooted, I tried to do factory reset on the android JellyBean(Configs>Privacity>Factory Reset), now my phone is stucked on a bootloop, I try to turn on my device and a screen with android being repaired appears, then a red triangle appears on the belly's droid and my phone turn off, anyone know what could be?
Really thanks for the attention mates, and sorry for my bad english!
@update
Just boot on recovery and Wipe Data/Cache, now my device is working fine, thank you guys xDD
I have the exact same problem on Canadian XT 925 all stock. Every time the phone is turned on, it goes back to the android robot with blue orbits moving in the stomach(repair), then the screen just goes black. The only work around I found is to use 3 button combo to go into recovery menu and hard reset the device, but this happens every time I turn the phone on and off.
Titerepayaso said:
I have the exact same problem on Canadian XT 925 all stock. Every time the phone is turned on, it goes back to the android robot with blue orbits moving in the stomach(repair), then the screen just goes black. The only work around I found is to use 3 button combo to go into recovery menu and hard reset the device, but this happens every time I turn the phone on and off.
Click to expand...
Click to collapse
This is an issue on the Rogers and Fido RAZR HD ...
Download the Original Rogers/Fido Rom : http://sbf.droid-developers.org/van...12.2_CANADA_VANQJBLTEFRCI_P004_CFC_fb.xml.zip
Download RSD Lite : http://fwteam.grupoandroid.com/OTAs/RSDLite6.1.5.zip
Flash !
Your phone is now 100 % full working !
Same thing
o2qc418 said:
This is an issue on the Rogers and Fido RAZR HD ...
Download the Original Rogers/Fido Rom : http://sbf.droid-developers.org/van...12.2_CANADA_VANQJBLTEFRCI_P004_CFC_fb.xml.zip
Download RSD Lite : http://fwteam.grupoandroid.com/OTAs/RSDLite6.1.5.zip
Flash !
Your phone is now 100 % full working !
Click to expand...
Click to collapse
Hi everyone. I got the same issue, but in my case i can't boot on fastboot, and my pc just recognize my razr hd as "QHSUSB_DLOAD" and can't find this drivers.
I tried to RSD as you said but RSD won't recognize it, so i don't know what else to do.
Any help will be appreciate.
:crying::crying:
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
migimantas said:
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
Click to expand...
Click to collapse
I have found that my emmc has the insane chip bug. The phone boots normally with cyanogen mode 11 but then it goes to sleep mode or I press the power button the screen goes black and the phone restarts. I have tried siyah kernel to try dual boot but then I flash siyah I cant get into recovery.
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
twinsen.net said:
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
Click to expand...
Click to collapse
I have already tried this but with the stock rom phone boots but at the section where I have to chose language I jus freezes stops working
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
twinsen.net said:
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
Click to expand...
Click to collapse
Take it straight away to the official service centre
Hello
G920f came to me that cannot startup. I powered on but after 10 seconds it freezed. if you leave longer powered of it can works maybe to one minute and freezed again. I tried 4 different flashes but same. I tried to hard reset but in freezed on android figure. I flash unikernel so I could enter on recovery meny made hard reset and wipe cache but still same situation. The phone is brand new and costumer said that he had this problem from begining after thid day of work and he didnt bought with warranty. Most likely its looks like hardware(CPU) problem but I want to know if any has these problem and if anyone has managed to resolve this problem
Might be a lemon S6. Return your S6 back to Samsung for warranty replacement.
I'm also in limbo, can't get into stock recovery at all to wipe anything it gets stuck in the android Logo, custom recovery like twrp and phil just freezes up also flash kernel with root(S6_UniKernel_v8-0002-ODIN) still no go I did just about everything I had up my sleeve and some I didn't mention still nothing still freezes.. Also flash firmwares just end up with the same result
Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
The_mamba said:
Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
Click to expand...
Click to collapse
Pretty common prob plug it in to the wall charge see if it boots sometimes it still wont but most of the time it will the battery quality on the g3 is crap they last at most a year with a few exceptions i would first order a battery.