I am using Micromax Canvas 2+ A110Q with a v2 stock ROM.
I rooted my phone and installed CWM v5.5.0.4 and I have SuperSU installed too.
I tried to install 2 custom ROMs and I ended up with a black screen both the times after locking the phone once.
The phone boots up normally as expected with the new ROM but screen goes black after locking it once.
The phone functions normally. For eg. Whenever someone calls, I randomly try to pick the phone(ofcourse with a black screen).
I can hear what the person is saying but the screen continues to remain blank.
Help me.
NOTE: I am a total newbie to the droid world. It took me 2 days to root my phone and install a custom ROM (LOL)
This is my first post on this forum.
I attached some result by Root Checker Pro. Might help.
Related
i have micromax A60, it is working nicely, but it is getting shutdown suddenly, cannot restart withuot removing battery and inserting again battery,
pl. help
ayubgamim said:
i have micromax A60, it is working nicely, but it is getting shutdown suddenly, cannot restart withuot removing battery and inserting again battery,
pl. help
Click to expand...
Click to collapse
i have micromax A60, it is working nicely, but it is getting shutdown suddenly, cannot restart without removing battery and inserting again battery,
pl. help
I have same issue; I think we install apps from net some thing might be causing the shutdown. Initially I thought that shutdown might be due to battery down when I remve battery and again start the A60; battery will be 80% good.
please let know if you the cause!!!
After going through a number of forums, I realized that this is a known issue and people have got their handsets replaced.
I got the replacement too, after a wait of almost 3 weeks. This was because the handset was not in stock at the distributor's end.
However, its just being 3 hours and I haven't even operated the phone since I received it, but I am facing the same problem.
All I have done till now is accessed my Gmail account.
maybe late reply but I am facing this same issue,
sometime my phone is shutdown(even If battery is full) then I throw my phone on bed and my phone start working(without rebooting)
Micromax is a really not worth more then a dust(Micromax company located in India's best Gutter..)
To solve all your micromax a60 problems like ....
Root, automatically shutdown, recovery , app2sd, rom & recovery dump,drivers and more go to the bellow link .......
http://forum.xda-developers.com/showthread.php?t=883420
It becomes unresponsive.
Actually the phone is not shutting down accidentally, rather it gets unresponsive sometimes.
Please install the custom recovery and then a custom ROM.
Then u'll see the problem will b solved.
I m also having the same phone.
here is the custom recovery
and the flash_image binary to flash the recovery.....(Find the attachment)
Here is the custom ROm
http://forum.xda-developers.com/showpost.php?p=18083062&postcount=1179
Here is the guide to flash the recovery image with the help of "flash_image" binary....
http://forum.xda-developers.com/showthread.php?t=1013698
no need to download the items in the above page coz i've provided u everything that u need, jus follow the instructions.
Regards,
shibaa987
Hey there. My grandma's got a Micromax Bolt A27 (rooted, stock ROM, Gingerbread 2.3.5, bootloader locked). For some reason, even though it was 46% charged, it shut off without any reason. And it won't turn on. I tried the power button, removed the battery, the SIM card (only one inside), microSD card, put them back again, tried the power button, plugged it in, tried the power button again, but to no avail. And no, I wasn't trying to flash a custom ROM, or anything of that sort. It just turned off. No (visible) reason. Help?
Try resting the mobile..
Or try battery calibration using some app..
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...
Dead mmx a27
my mmx a27 shows the ninja logo after flaheing new rom in mmx care.
Now i have rooted it and tried to install a rom using cwm. the rom installed and when i rebooted it get stuck in the ninja logo. i can enter the bootloader but not the recovery. using fastboot i flashed all the images(boot, ecovery,cache,sys etc.) but did not worked. also i cannot use adb command .as when i connect it and type adb devices it shws nodevice.
plz plz help
Hello. I use Micromax Canvas Doodle A111. Phone specs are as follows-
OS version- 4.1.2 (JB)
Chipset- Qualcomm MSM8225Q Snapdragon
CPU- Quad-core 1.2 GHz Cortex-A5
Ram- 512Mb
I have rooted my phone (CWM is not installed yet). Removed all the bloatwares. After rooting i was able to go into recovery mode. But after a while phone just won't go into recovery. Tried everything but it just wont go into recovery, only a black screen would turn up while my led showed blue colour. However normal booting was working and phone worked well.
Later on, i factory reset my phone. Before reseting, i took a complete backup of phone (settings backup as well) with help of Titanium Backup Pro 5.1... After reseting, i restored the settings and other stuff using TB. After everything was restored, the TB asked me to reboot my phone for restored settings to take into effect. So i selected reboot option from the TB notification. Phone powered off normally. But when it started up, it just got stuck at the Canvas Logo. No matter what i tried, whichever combination i used, it always stuck at canvas logo and no buttons worked after that. Led was also not glowing. I had to manually remove battery to power off the device. (Recovery mode combination worked, but as usual i can only see a black screen with my led showing blue colour).
I scanned internet for my problems but couldn't find a thing. Finally i took my phone to mmx customer care. They said the motherboard needs to be replaced. The cost is very high . 4.5k for replacing motherboard.
So my question is as follows- "Is there any solution for my problem? If not and i must change my motherboard; then can i change it at home. Where can i get a motherboard for my model?"
Any help is appreciated...
P.S: I rooted my phone using SRSone click root. The rooting was successful and showed no problems afterwords.
Hi,
You could follow this guide, and ask any questions you have regarding the guide here too ...
http://forum.xda-developers.com/can...guide-how-to-unbrick-micromax-canvas-t2901983
Good luck!
---------- Post added at 11:04 AM ---------- Previous post was at 11:03 AM ----------
Oh, if nothing works , as you said, the service center may be your only option.
I am using micromax unite 2(8gb, android 5.0) from about 1.5 years now. I repartioned it. It worked flawlessly for about 6 months, but recently i am experiencing booting loops sometimes, by sometimes i mean i leave it alone for 2-3 days and it starts working again, but after some use it again starts restarting(There is yellow screen with micromax zoomed in at the bottom). I guess if i reinstall the stock rom, i could solve the problem. I have checked using( power+vol up+vol dwn) > factory mode, all hardware works fine. Its some problem with the software. Please help..
You cau use Clean KAT v.4 ROM. i also faced bootloop. Goto custom recovery.
Clean Kat ROM :good:
Prateek Mishra said:
I am using micromax unite 2(8gb, android 5.0) from about 1.5 years now. I repartioned it. It worked flawlessly for about 6 months, but recently i am experiencing booting loops sometimes, by sometimes i mean i leave it alone for 2-3 days and it starts working again, but after some use it again starts restarting(There is yellow screen with micromax zoomed in at the bottom). I guess if i reinstall the stock rom, i could solve the problem. I have checked using( power+vol up+vol dwn) > factory mode, all hardware works fine. Its some problem with the software. Please help..
Click to expand...
Click to collapse
Install philz touch coustom recovery n thn install cyanogen 13 v3 rom for unite 2. It solved my issue of bootlooping and crashing.
Good Morning/Hello/Hi
I own a lenovo vibe k5 plus a6020a46. my device is rooted and it has installed custom recovery, but when i was installing custom rom i got error 7 and errors so i just wipe all data and dalvil caches etc and tried to powere on my device but it was showing only the boot screen with white and in middle lenovo and down powered by android, for this i asked for help in xda and got this solution https://forum.xda-developers.com/k5-plus/how-to/unbrick-vibe-k5-plus-qfil-qpst-method-t3467830
from this article i did all the same same, i followed its all steps and at last there was also DOWNLOAD SUCCESFUL IN BLUE, but now my device is not starting at all
I am pressing the power on button for 10 minutes also but still it is not getting powered on, only when charger is connecte it shows red led light but screen doesni awake
Nothing is displayed on screen total blank black (this is current condition)
but everything is working calling and all phone sound is also working only touch and screen is not working
please help me deal with this issue
what should i do next
thanks in advance
Maybe you can flash a new build with QPST Tool if you find a compatible build to flash.Attention: Only the a6020a46 builds working with the a6020a46 phones!